espace 8950 ip phone v100r001c00spc200 administrator guide 03
TRANSCRIPT
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
1/195
eSpace 8950 IP Phone
V100R001C00SPC200
Administrator Guide
Issue 03
Date 2014-10-16
HUAWEI TECHNOLOGIES CO., LTD.
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
2/195
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://enterprise.huawei.com
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
http://enterprise.huawei.com/
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
3/195
About This Document
Overview
This document covers the following information about the eSpace 8950 IP phone: service
features, networking, batch configurations with and without eSight, configuration methods of
common functions, and basic troubleshooting methods.
Intended Audience
This document is intended for:
l Technical support engineers
l Maintenance engineers
l Agent engineers
l Enterprise administrators
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
eSpace 8950 IP Phone
Administrator Guide About This Document
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
4/195
Symbol Description
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.NOTICE is used to address practices not related to
personal injury.
Calls attention to important information, best practices and
tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Change History
Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.
Issue 03 (2014-10-16)
This issue is an updated second office application (FOA) release, and includes the following
changes:
Added the description of Integrity verification guide.
Issue 02 (2014-09-20)
This issue is an updated first office application (FOA) release, and includes the following
changes:
Updated the description of Network Port Link Mode.
Issue 01 (2014-08-15)
This issue is the first office application (FOA) release.
eSpace 8950 IP Phone
Administrator Guide About This Document
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
5/195
Contents
About This Document.....................................................................................................................ii
1 Before You Start.............................................................................................................................1
2 Before Your Configuration..........................................................................................................2
2.1 UC2.X Networking.........................................................................................................................................................3
2.2 IMS+UC.........................................................................................................................................................................3
3 Preparing for Your Configuration..............................................................................................5
3.1 Obtaining Reference Documents....................................................................................................................................6
3.2 Required Data.................................................................................................................................................................9
3.3 Network Environment Setup........................................................................................................................................12
3.3.1 Wi-Fi..........................................................................................................................................................................12
3.3.2 802.1x........................................................................................................................................................................13
3.3.3 Configuring the VLAN..............................................................................................................................................17
3.3.4 Configuring the Phone IP Address............................................................................................................................18
4 Selecting a Configuration Method...........................................................................................19
4.1 Using eSight.................................................................................................................................................................19
4.1.1 Creating an IP Phone Subnet.....................................................................................................................................19
4.1.2 Version Management for IP Phone Upgrade.............................................................................................................21
4.1.3 Configuration File Management................................................................................................................................26
4.1.4 Associate Configuration Files with Subnets..............................................................................................................30
4.1.5 Connecting an IP phone to eSight.............................................................................................................................30
4.1.5.1 Setting Parameters for Connecting to eSight..........................................................................................................31
4.1.5.2 Access Scan............................................................................................................................................................33
4.1.5.3 Adding IP Phone Devices in Batches.....................................................................................................................34
4.1.5.4 Adding a Single IP Phone.......................................................................................................................................35
4.2 Using DHCP Option 246..............................................................................................................................................38
4.2.1 Batch Configuration..................................................................................................................................................38
4.2.2 Verification................................................................................................................................................................41
4.3 Using Web....................................................................................................................................................................41
4.4 Using LCD....................................................................................................................................................................44
5 Service Configuration.................................................................................................................45
eSpace 8950 IP Phone
Administrator Guide Contents
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
6/195
5.1 Multi-Line Support.......................................................................................................................................................45
5.2 LDAP Directory...........................................................................................................................................................55
5.3 Dialing Rules................................................................................................................................................................61
5.4 Emergency Call............................................................................................................................................................64
5.5 Multi-Certificate Support.............................................................................................................................................67
5.6 Service Rights Management.........................................................................................................................................72
5.7 Advanced Secretary Service.........................................................................................................................................73
5.8 UC Corporate Directory...............................................................................................................................................77
5.9 Instant Conference and Group Conference...................................................................................................................80
5.10 Extension Mobility.....................................................................................................................................................81
6 System Configuration.................................................................................................................86
6.1 Web Page Access..........................................................................................................................................................86
6.2 Advanced Screen Access..............................................................................................................................................866.3 System Settings.............................................................................................................................................................87
6.3.1 Date and Time...........................................................................................................................................................87
6.4 Call Settings..................................................................................................................................................................89
6.4.1 Conference.................................................................................................................................................................89
6.5 Advanced Settings........................................................................................................................................................90
6.5.1 Network .....................................................................................................................................................................90
6.5.2 Server.......................................................................................................................................................................105
6.5.3 Admin Password Change.........................................................................................................................................115
6.5.4 Media.......................................................................................................................................................................1166.5.5 SIP Signaling...........................................................................................................................................................123
6.5.6 Diagnostics..............................................................................................................................................................129
6.5.7 Configuration File....................................................................................................................................................133
6.5.8 Upgrade...................................................................................................................................................................133
6.5.9 TR069......................................................................................................................................................................135
6.5.10 Ping Test................................................................................................................................................................138
6.5.11 Others.....................................................................................................................................................................139
7 Maintenance...............................................................................................................................143
7.1 Quickly Configuring a Single IP Phone.....................................................................................................................143
7.2 Upgrade......................................................................................................................................................................147
7.2.1 Batch U pgrade (Using eSight).................................................................................................................................148
7.2.2 Batch U pgrade (Without eSight).............................................................................................................................148
7.2.3 Automatic Upgrade..................................................................................................................................................148
7.2.4 Manual Upgrade......................................................................................................................................................149
7.3 Configuration File Delivery........................................................................................................................................150
7.3.1 Batch Delivery (Using eSight)................................................................................................................................150
7.3.2 Batch Delivery (Without eSight).............................................................................................................................150
7.4 Factory R eset..............................................................................................................................................................151
eSpace 8950 IP Phone
Administrator Guide Contents
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
7/195
8 Appendix.....................................................................................................................................152
8.1 Preparing a UPF File..................................................................................................................................................152
8.2 Setting Up the DHCP Server......................................................................................................................................156
8.2.1 Setting Up the DHCP Server (IPv4) in the Windows Server 2008.........................................................................156
8.2.2 Setting Up the DHCP Server on Router AR-28......................................................................................................166
8.2.3 Setting Option 246 Parameters................................................................................................................................167
8.3 Setting Up an HTTP Server........................................................................................................................................171
8.3.1 Using the Apache Server.........................................................................................................................................172
8.3.2 Using the Windows IIS Component........................................................................................................................172
8.4 Setting Up the AD and DNS Servers..........................................................................................................................175
8.5 Editing the Microsoft AD2008 User..........................................................................................................................184
eSpace 8950 IP Phone
Administrator Guide Contents
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vi
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
8/195
1 Before You StartThis chapter provides guidance for you to use this manual in a more efficient way.
eSpace 8950 is a multimedia endpoint that complies with the Session Initiation Protocol (SIP).
It connects to a broadband network, instead of the traditional public switched telephone network
(PSTN).
Table 1-1 provides a scenario-based usage guide of this manual.
Table 1-1 Manual usage guide
Scenario
Task Chapter/Section for Reference
Deplo
yment
Setting up the network environment 3.3 Network Environment Setup
Installing the IP phone and using it to
verify basic telephony
eSpace 8950 IP Phone Quick Install Guide
Learning about the networking,
necessary data to prepare, and
reference documents, and connecting
the IP phone to the network
2 Before Your Configuration
Selecting a proper configuration
method for eSpace 8950 configuration,
and configuring the eSpace 8950system and services depending on your
needs
4 Selecting a Configuration Method
Using all the phone functions eSpace 8950 IP Phone User Guide
Routi
ne
maint
enanc
e
Upgrading eSpace 8950 7.2 Upgrade
Delivering the configuration file 7.3 Configuration File Delivery
Quickly configuring a single eSpace
8950
7.1 Quickly Configuring a Single IP
Phone
Configuring services 5 Service Configuration
eSpace 8950 IP Phone
Administrator Guide 1 Before You Start
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
9/195
2 Before Your ConfigurationThis section describes common networks of eSpace 8950, including its signaling with different
servers on the networks.
eSpace 8950 IP Phone
Administrator Guide 2 Before Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
10/195
2.1 UC2.X Networking
This section describes the UC2.X networking of eSpace 8950, including its signaling with
different servers on the UC2.X network.
Figure 2-1 shows the UC2.X networking of eSpace 8950.
Figure 2-1 UC2.X networking
2.2 IMS+UC
This section describes the IMS+UC networking of eSpace 8950, including its signaling with
different servers on the IMS+UC network.
Figure 2-2 shows the UC2.X networking of eSpace 8950.
eSpace 8950 IP Phone
Administrator Guide 2 Before Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
11/195
Figure 2-2 UC2.X networking
eSpace 8950 IP Phone
Administrator Guide 2 Before Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
12/195
3 Preparing for Your ConfigurationThis section describes the preparations you must make for configuration of eSpace 8950s.
You can manage eSpace 8950s in a unified manner using eSight or DHCP Option 246, including
version upgrade and configuration file delivery.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
13/195
3.1 Obtaining Reference Documents
This section describes how to obtain reference documents for configuration of eSpace 8950s.
Before deploying eSpace 8950s, obtain related documents for guidance. Table 3-1 lists how to
obtain reference documents related to eSpace 8950.
Table 3-1 Obtaining reference documents
Item Document Description How to Obtain
eSpace 8950 eSpace 8950 IP
Phone User Guide
Describes the
appearance, buttons,
basic services, IP
telephony (IPT)
services, UnifiedCommunications
(UC) services, and
frequently asked
questions (FAQs)
related to eSpace
8950.
Visit http://
support.huawei.co
m/enterprise and
choose SUPPORT >
Product Support >Unified
Communications
and Collaboration
> Unified
Communications >
Unified
Communications
Endpoints > 8900
Series IP Phone >
eSpace 8950.
eSpace UC2.2 eSpace UC
V200R002C00
Product
Documentation
Describes the
structure, highlights,
components,
services, functions,
operation and
maintenance,
network, and
applications related
to the Huawei eSpace
UC2.2 solution.
Visit http://
support.huawei.co
m/enterprise and
choose SUPPORT >
Product Support >
Unified
Communications
and Collaboration >
Unified
Communications >
Unified
CommunicationsSolutions > eSpace
UC >
V200R002C00.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
http://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprise
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
14/195
Item Document Description How to Obtain
eSpace UC eSpace UC Product
Documentation
Describes the
structure, highlights,
components,services, functions,
operation and
maintenance,
network, and
applications related
to the Huawei eSpace
UC solution.
Visit http://
support.huawei.co
m/enterprise andchoose SUPPORT >
Product Support >
Unified
Communications
and Collaboration >
Unified
Communications >
Unified
Communications
Solutions > eSpace
UC.
eSight eSight Product
Documentation
Describes various
network element
(NE) management
functions related to
eSight (a Huawei-
provided network
management system
tailored for
enterprises),
including:
l NE accessl NE management
l Topology
management
l Security
management
l Performance
management
l Diagnostics
management
l Fault
management
Visit http://
support.huawei.co
m/enterprise and
choose SUPPORT >
Product Support >
Unified
Communications
and Collaboration >
Vertical
Collaboration >
Common Field >
eSight UC&C.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
http://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprise
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
15/195
Item Document Description How to Obtain
Communication
matrix
eSpace 8950 IP
Phone
Communication Matrix
Describes the
parameters related to
eSpace 8950communication
matrix.
Visit http://
support.huawei.co
m/enterprise andchoose SUPPORT >
Product Support >
Unified
Communications
and Collaboration
> Unified
Communications >
Unified
Communications
Endpoints > 8900
Series IP Phone >
eSpace 8950.
Configuration file
(Config-
eSpace8950.xml)
eSpace 8950 IP
Phone Configuration
File Parameter
Description
Describes the basic
configuration
parameters related to
eSpace 8950.
Visit http://
support.huawei.co
m/enterprise and
choose SUPPORT >
Product Support >
Unified
Communications
and Collaboration
> Unified
Communications >
Unified
Communications
Endpoints > 8900
Series IP Phone >
eSpace 8950.
Unified gateway eSpace U19XX
Unified Gateway
Product
Documentation and
eSpace U29XX
Unified Gateway Product
Documentation
Describe the
architecture,
features,
components,
services, functions,
operation andmaintenance,
networking, and
applications of
eSpace U19XX and
eSpace U29XX.
Visit http://
support.huawei.co
m/enterprise and
choose SUPPORT >
Product Support >
UnifiedCommunications
and Collaboration >
Unified
Communications >
Unified
Communications
Gateways.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
http://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprise
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
16/195
3.2 Required Data
This section describes how to obtain data necessary for configuration of eSpace 8950s dependingon your needs.
Obtain necessary data, as listed in Table 3-2.
Table 3-2 Required data
Item Description How to Obtain
Phone IP
address
Generally, eSpace 8950
automatically obtains an IP address
from the DHCP server. However,
you can still choose to use a staticIP address supplied by your
network administrator for eSpace
8950.
On the phone home screen, tap ,
choose APPLICATION >
Settings,chooseSettings > About
Phone > Status and view the phone's IP address.
Phone MAC
address
Obtain the physical address of
eSpace 8950's network adapter,
which is globally unique.
Hardware
version number
of the phone
Obtain the hardware version
number of eSpace 8950.On the phone home screen, tap ,
choose APPLICATION >
Settings,chooseSettings > About
Phone and view the hardwareversion number.
Phone SN Obtain the product serial number
(SN) of eSpace 8950.On the phone home screen, tap ,
choose APPLICATION >
Settings,chooseSettings > About
Phone and view product SN.
DHCP server
address
Obtain the IP address of the DHCP
server.
If a DHCP server has been
deployed, obtain the DHCP server
address from your network
administrator.
If no DHCP server is available,
deploy a DHCP server by referring
to8.2 Setting Up the DHCP
Server.
DNS server
address
Obtain the IP address of the DNS
server. This IP address is required
when you are manually configuring
the IP phone.
If a DNS server has been deployed,
obtain the DNS server address from
your network administrator.
If no DNS server is available,
deploy a DNS server by referring to
8.4 Setting Up the AD and DNS
Servers.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
17/195
Item Description How to Obtain
File server
address
Obtain the IP address of the file
server that stores upgrade files
including the Upgrade Policy File(UPF) and the version file.
If a file server has been deployed,
obtain the file server address from
your network administrator.If no file server is available, deploy
a file server by referring to 8.3
Setting Up an HTTP Server.
Registrar server
address
Obtain the IP address of the SIP
server with which eSpace 8950
registers based on the network
environment:
l In a UC2.X network
environment, the SIP server is a
gateway of the eSpace U1900
series.
l In a IMS+UC network
environment, the SIP server is a
gateway of the eSpace U2900
series. Its IP address is
automatically pushed by the
Authentication and Admission
(AA) server.
Obtain the SIP server address from
your network administrator.
AA server
address
Obtain the IP address of the AA
server, which is deployed only in a
IMS+UC network environment.
Obtain the AA server address from
your network administrator.
Upgrade server
address
Obtain the IP address of the upgrade
server based on the network
environment:
l If eSight has been deployed, use
the eSight IP address.
l If eSight is not available, use the
IP address of the DHCP Option
246 server.
Obtain the upgrade server address
from your network administrator.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
18/195
Item Description How to Obtain
Corporate
directory server
address
Obtain the IP address of the
corporate directory server based on
the network environment:l In a UC2.X network
environment, use the IP address
of the BMU corporate directory
server.
l In a IMS+UC network
environment, use the IP address
of the PGM corporate directory
server.
l On the network where the
LDAP directory is used, use the
IP address of the LDAP server.
Obtain the corporate directory
server address from your network
administrator.For details about how to configure
an LDAP server, see5.2 LDAP
Directory.
Version file Obtain and apply it to eSpace 8950
in unified or single phone upgrade
mode.
Visit http://support.huawei.com/
enterprise and choose SUPPORT
> Software > Unified
Communications and
Collaboration > Unified
Communications > Unified
Communications Endpoints.
Download the desired version file.
Signal tone, and
certificate files
Obtain the files, and import the files
into eSpace 8950 in unified upgrademode or single phone upgrade
mode.
The signal tone file is a .wav file in
PCM format.
The certificate file is a .pem file.
Obtain the certificate file from the
corresponding server side.
Configuration
file
Modify the configuration file
depending on your needs, and apply
the modified configuration file to
eSpace 8950 by means of, for
example, unified configuration file
management or file import to a
single phone. For details, see4.1.3Configuration File Management.
Visit http://support.huawei.com/
enterprise and choose SUPPORT
> Software > Unified
Communications and
Collaboration > Unified
Communications > Unified
Communications Endpoints.Download the configuration file of
the desired version.
Integrity
verification
guide
Verify the downloaded software
packages to ensure the software
validity.
Visit http://support.huawei.com/
enterprise and choose Support >
Tools and Resources > Tools
software > Software digital
signature (OpenPGP) validation
tool > V100R001C00. Download
the OpenPGP Signature
Verification Guide.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
http://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprisehttp://support.huawei.com/enterprise
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
19/195
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
20/195
Configuring Advanced Wi-Fi Settings
Step 1 In the Wi-Fi network list, tap .
Step 2Tap ADVANCED.
Step 3 Set parameters based on the site requirements.
----End
Disabling Wi-Fi
On the Notifications screen, tap to disconnect the phone from Wi-Fi.
3.3.2 802.1x
The IP phone currently supports two 802.1x authentication methods: Extensible Authentication
Protocol-Message Digest Algorithm 5 (EAP-MD5) and Extensible Authentication Protocol-Transport Layer Security (EAP-TLS).
802.1x is a port-based network access control protocol defined by IEEE. This protocol
implements access authentication and control for devices attempting to connect to an enterprise's
internal network. Devices (for example, IP phones) are granted access to internal network
resources only after being authenticated.
NOTE
To ensure network access security, it is recommended that you enable the 802.1x function. If EAP-MD5 is used,
obtain the 802.1x user name and password from the network administrator beforehand.
EAP-MD5 Authentication Process
Figure 3-1 illustrates the EAP-MD5 authentication process.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
21/195
Figure 3-1 EAP-MD5 Authentication Process
The authentication steps are as follows:
Step 1 The IP phone initiates an 802.1x authentication request to the switch.
Step 2 The switch asks the IP phone to provide its user name.
Step 3 The IP phone sends its user name to the switch.
Step 4 The switch forwards the user name to the RADIUS sever.
Step 5 After identity authentication, the RADIUS server sends an EAP-MD5 authentication request tothe switch.
Step 6 The switch forwards the EAP-MD5 authentication request to the IP phone.
Step 7 The IP phone sends MD5 digest to the switch and then to the RADIUS server.
Step 8 If authentication is successful, the switch opens all ports and the IP phone can then accessnetwork resources.
Step 9 If authentication fails, an authentication failure message is displayed on the IP phone, and theIP phone cannot access network resources.
----End
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
22/195
EAP-TLS Authentication Process
Before EAP-TLS authentication, make sure that the following prerequisites have been met:
l The switch supports MAC-address and certificate-based authentication.
l The IP phone supports EAP-TLS authentication.
Figure 3-2 illustrates the EAP-TLS authentication process.
Figure 3-2 EAP-TLS Authentication Process
The authentication steps are as follows:
Step 1 The IP phone initiates an 802.1x authentication request to the switch.
Step 2 The switch asks the IP phone to provide its user name.
Step 3 The IP phone sends its user name to the switch.
Step 4 The switch forwards the user name to the RADIUS sever.
Step 5After identity authentication, the RADIUS server sends an EAP-TLS authentication request to
the switch.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
23/195
Step 6 The switch forwards the EAP-TLS authentication request to the IP phone.
Step 7 The IP phone and the RADIUS server implement TLS handshake negotiations.
Step 8 If authentication is successful, the switch opens all ports and the IP phone can then access
network resources.
Step 9 Optional: If authentication fails, the IP phone obtains the eSight server IP address from theDHCP server and then connects to the eSight server to download a new certificate.
Step 10 Optional: After the new certificate is downloaded, the IP phone automatically restarts andinitiates authentication again (starting from Step 1)
----End
EAP-TLS Certificate Update Process
The EAP-TLS certificate is stored on the eSight server. The IP phone can connect to the eSightserver to download the EAP-TLS certificate. Figure 3-3 illustrates the EAP-TLS certificate
update process.
Figure 3-3 EAP-TLS Certificate Update Process
The certificate update steps are as follows:
Step 1 The eSight server applies for a certificate based on the IP phone's serial number (SN) that has been imported.
Step 2 The IP phone initiates an EAP-TLS authentication request to the RADIUS server.
Step 3 The RADIUS server returns a authentication failure message to the switch and then to the IP phone.
Step 4 The switch adds the IP phone to the Guest VLAN.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
24/195
Step 5 The IP phone obtains its IP address and the eSight server IP address from the DHCP server.
Step 6 The IP phone time-synchronizes with the NTP server.
Step 7 The IP phone obtains its certificate from the eSight server.
Step 8 The IP phone automatically restarts.
Step 9 The IP phone initiates an EAP-TLS certificate to the RADIUS server. Authentication issuccessful.
----End
3.3.3 Configuring the VLAN
You can configure the VLAN manually or enable automatic VLAN configuration for eSpace
8950.
Automatic Configuration
The Link Layer Discovery Protocol (LLDP) allows switches to deliver VLAN information
carried in LLDP data packets.
The switch in use must support LLDP in order to implement automatic VLAN configuration for
eSpace 8950.
To enable LLDP for eSpace 8950 to automatically obtain VLAN information, perform the
following steps:
Step 1 Power on eSpace 8950.The phone login screen is displayed.
Step 2 On the phone login screen or home screen, choose > .
Step 3 Choose Network Security, enter the administrator password, and click OK .
NOTE
The default administrator password is admin123. To ensure security, change the administrator password at your
first login.
Step 4 Choose Network Access > LLDP-MED.
Step 5 Press the Enable softkey.
----End
Manual Configuration
Obtain the VLAN ID and priority from the switch before attempting to manually configure
VLAN information.
To manually configure VLAN information, perform the following steps:
Step 1 Power on eSpace 8950.
The phone login screen is displayed.
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
25/195
Step 2 On the phone login screen or home screen, choose > .
Step 3 Choose Network Security, enter the administrator password, and click OK .
NOTE
The default administrator password is admin123. To ensure security, change the administrator password at your
first login.
Step 4 Choose Network Access > VLAN and press the Enable softkey.
Step 5 Set VLAN ID according to the VLAN ID obtained.
Step 6 Set VLAN Priority according to the VLAN priority obtained and press OK .
----End
3.3.4 Configuring the Phone IP Address
This section describes how to configure the phone IP address on the eSpace 8950 LCD screen.
DHCP
By default, DHCP mode is selected. This allows eSpace 8950 to obtain an IP address from the
DHCP server.
To enable DHCP on an IPv4 network, perform the following steps:
Step 1 tap , choose APPLICATION > Settings
Step 2 Choose Ethernet > IPv4.
Step 3 Choose IPv4 Settings > DHCP and press OK .
----End
Static IP
If a static IP address is required for eSpace 8950, set IPv4 Settings to Static.
Obtain an IP address, subnet mask, gateway address, and DNS address from your network
administrator. To set a static IP address for eSpace 8950, perform the following steps:
Step 1 tap , choose APPLICATION > Settings
Step 2 Choose Ethernet > IPv4.
Step 3 Choose IPv4 Settings > Static.
Step 4 Set IP, Gateway, Subnet Mask , and DNS Server, and press OK .
----End
eSpace 8950 IP Phone
Administrator Guide 3 Preparing for Your Configuration
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
26/195
4 Selecting a Configuration Method4.1 Using eSight4.1.1 Creating an IP Phone Subnet
Before connecting IP phones to the eSight and using the configuration and management
functions provided by the eSight, create subnets for IP phones. If TR-069 parameters are
correctly set on an IP phone, the eSight can automatically add the IP phone to the corresponding
IP phone subnet.
Prerequisites
You have the right to operate the Resource menu.
Context
l You can create lower-level subnets in a subnet.
l To ensure management performance, do not create subnets of more than 10 levels and
control the number of devices in a subnet within 500.
l If the IP address of an IP phone belongs to the IP address segments of multiple subnets, the
eSight adds the IP phone to the subnet with the smallest IP address segment that covers the
IP phone's IP address.
l Once the IP address of an IP phone changes, the eSight automatically moves the IP phone
to the matching subnet.
Procedure
Step 1 Choose Resource > Add Resource > Add Subnet from the main menu.
Step 2 Click IP Phone Subnet.
The Creating an IP phone subnet page is displayed.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
27/195
Figure 4-1 Creating an IP phone subnet
Step 3 Configure the basic information about the subnet and its manageable IP address segments.
NOTICE
By default, an IP phone subnet is mounted to the Root subnet. When creating an IP phone
subnet, you can mount it to the Root subnet or another IP phonesubnet. You cannot mount an
IP phonesubnet to an non-IP phone subnet; otherwise, the IP phones under the IP phonesubnet
cannot be properly managed through the IP phone management function.
Step 4 Click OK .
NOTE
Click Apply. The subnet is created. You can repeat the preceding operations to create more subnets.
l If the subnet is created successfully, the Add Subnet Success dialog box is displayed. Click
OK in the dialog box.
l If the subnet fails to be created, the system displays the failure cause. Click OK in the dialog
box and set parameters again.
----End
Result
1. Choose Resource > Resource Group > Subnet from the main menu.
2. If you can find the new IP phone subnet in the management object list, the IP phone
subnet is created successfully.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
28/195
4.1.2 Version Management for IP Phone Upgrade
This function allows you to upload manual version files or autodeploy version files for a model
of IP Phone.
Prerequisites
The software package of the IP phone to be upgraded is available.
Context
The eSight supports the following IP phone models: eSpace 6805, eSpace 6810, eSpace 7810,
eSpace 7820, eSpace 7830, eSpace 7850, eSpace 7870, eSpace 7910, eSpace 7950, eSpace 8850
and eSpace 8950.
l Manual upgrade
This function allows you to upload multiple version files for a model of IP phones. During
upgrade, you can select a required version.
l Automatical deployment
After IP phone version files are uploaded to the file server, the eSight automatically queries
the file server for version files that match connected IP phone models when IP phones are
connected to the eSight during site deployment or when new IP phones are connected to
the eSight as required. If the version file of a connected IP phone is different from the one
on the file server, the eSight automatically upgrades the version file of the IP phone.
Procedure
Step 1 Choose Configuration > Unified Communications & Collaboration > IP PhoneManagement from the main menu.
Step 2 In the navigation tree on the left, choose IP Phone Upgrade Management > VersionManagement.
Step 3 Click Create and set version file parameters in the Version Attribute dialog box.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
29/195
Figure 4-2 Version Attribute
Table 4-1 Parameter description
Parameter Description How to Set
Versi
on
Device
Type
Indicates the device type
matching the version file to be
uploaded.
Select IPPhone.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
30/195
Parameter Description How to Set
Device
Model
Indicates the model of IP phones
that support version
management.The supported models are as
follows:
l eSpace 6800 series: eSpace
6805 and eSpace 6810
l eSpace 7800 series: eSpace
7810, eSpace 7820, eSpace
7830, eSpace 7850, and
eSpace 7870
l eSpace 7900 series: eSpace
7910 and eSpace 7950
l eSpace 8850
l eSpace 8950
Select the models of IP phones whose
configurations you want to upgrade.
Version
File
Type
Indicates the type of the version
file to upload. For example, you
can upload corresponding
version files in the Version File
area only after you select Main
Firmware.
Set this parameter based on the model
and type of the IP phone to be
upgraded.
l Manual upgrade: Select Main
Firmware and Configuration
file, one of them or both.
l Automatical deployment: Select
AutoDeploy Version.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
23
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
31/195
Parameter Description How to Set
Version Indicates the version number of
the version file that you want to
upload.
l eSpace 6800 series, eSpace 7800
series, and eSpace 8850: Directly
enter the version number, for example, 9.60.94.80, in the name
of the version file that you want to
upload.
l eSpace 7900 series and eSpace
8950: When an eSpace 7910 or
7950 IP phone is upgraded, the
eSight automatically adds the
version number specified by this
parameter to the upgrade policy
file and delivers the upgrade
policy file to the IP phone. The IP
phone matches the version
number in the upgrade policy file
with its own version number.
If the version numbers are the
same, the IP phone will not be
upgraded. If the version numbers
are different, the IP phone will be
upgraded.
NOTICE
Even if the version number in the
upgrade policy file is earlier than that
of the IP phone, the eSight still performs the upgrade operation.
Ensure that a correct version file is
selected before upgrade.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
24
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
32/195
Parameter Description How to Set
Versi
on
File
Main
Firmwar
e/AutoDe
Indicates the version file that you
want to upload for the IP phone
to be upgraded.
Select the required version file.
l eSpace 6800 series: Select a
version file in .zip format. Theversion file is the main program.
l eSpace 7800 series: Select a
version file in .rom format. The
version file is the main program.
l eSpace 7900 series: Select a
version file in .zip format. The
version file contains the main
program, language package,
signal tone , certificate and
configuration file.
– Extract files from the software
package. The .bin file that is
obtained is the main program.
– Make a language package file,
compress it into a .tar file, and
rename it language.tar.
For details, see the eSpace
7910&7950 IP Phone
Language Package
Customization Guide.
–Obtain a signal tone filein .wav format, compress it
into a .tar file, and rename it
signal.tar.
– Obtain certificate files
in .pem format.
You can select the required .tar
packages to compress them into
a .zip package and upload
the .zip package to the eSight.
NOTICE
Directly compress the selected .tar packages to a .zip package. You do
not need to place them into a folder
and then compress the folder;
otherwise, the upgrade may fail.
l eSpace 8850: Select a version file
in .bin format. The version file is
the main program.
l eSpace 8950: Select a version file
in .zip format. The version file
contains the main program, signal
tone, certificate and configurationfile.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
25
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
33/195
Parameter Description How to Set
ploy
Version
NOTE
Automatical deployment of IP
Phone is not include these types:
eSpace 6805, eSpace 6810 andeSpace 8850.
NOTICE
The file name cannot contain such
characters as ; / ? : @ # ' & = + $ ,.
Configu
ration
file
Indicates the configuration file
that you want to upload for the IP
phone to be manually upgraded.
Select the required version file.
l eSpace 6800 series: Select a
configuration file in .xml format.
l eSpace 7800 series: Select a
configuration file in .cfg format.
l eSpace 7900 series: Select a
configuration file in .xml format.
l eSpace 8850: Select a
configuration file in .xml format.
l eSpace 8950: Select a
configuration file in .xml format.
Step 4 Click OK .
The eSight uploads the version file to the file server. You can view the new version file on the
Version Management page.
----End
4.1.3 Configuration File Management
Configuration file management allows you to modify common parameters in the configuration
file template to batch modify IP phone configuration parameters.
Prerequisites
The configuration file template for the IP phones whose configurations you want to modify is
available.
l
The configuration file template for eSpace 7800 series IP phones in .cfg format.l The configuration file template for 8850 IP phones in .xml format.
l For eSpace 6800 series IP phones, eSpace 7900 series IP phones and eSpace 8950 IP Phone,
compress the configuration file (Config-eSpace68XX.xmlConfig-eSpace79XX.xml or
Config-eSpace8950.xml) and the eSightUI.xml file provided by the eSight together to
a .zip package. This .zip package is the configuration file template for eSpace 6800 series
IP phones, eSpace 7900 series IP phones and eSpace 8950 IP Phone.
Context
When the IP phone is upgrading automatically or manually, it will get configuration files which
is uploaded here.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
26
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
34/195
Procedure
Step 1 Choose Configuration > Unified Communications & Collaboration > IP PhoneManagement from the main menu.
Step 2 (Optional) Upgrade the configuration file template for the IP phones whose configurations youwant to modify.
1. In the navigation tree on the left, choose IP Phone Upgrade Management >
Configuration File Template Manager, select the configuration file template for the
model of IP phones that you want to upgrade, and click on the right.
2. In the Upgrade Configuration File Template dialog box that is displayed, set
configuration file template parameters.
Figure 4-3 Upgrade Configuration File Template
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
35/195
Table 4-2 Parameter description
Parameter Description How to Set
Version Indicates the version of the IP
phone.
l eSpace 6800 and 7800 series:
Directly enter the version number,for example, 9.60.94.80, in the
name of the version file that you
want to upload.
l eSpace 7900 series, eSpace 8850
and eSpace 8950: Enter a version
number in the
VxxxRxxxCxxSPCxxxBxxx
format. You must enter
SPCxxxBxxx if any.
Configurati
on File
Template
Indicates the configuration file
template for the IP phones whose
configurations you want to
modify. Each configuration file
template contains the common
parameters for a specific model
of IP phones.
NOTE
The common parameters for each
model of IP phones vary.
Select the configuration file template
for the IP phones whose
configurations you want to modify.
l The configuration file for eSpace
6800 series IP phones must be
in .zip format.
l The configuration file for eSpace
7800 series IP phones must be
in .cfg format.
l The configuration file for eSpace
7900 series IP phones must be
in .zip format.
l The configuration file for eSpace
8850 IP phones must be in .xml
format.
l The configuration file for eSpace
8950 IP phones must be in .zip
format.
3. Click OK .
The eSight uploads the selected configuration file template to the file server.
4. Repeat the preceding operations if you want to upgrade the configuration file template for
IP phones of another model.
Step 3 Manage IP phone configuration files.
1. In the navigation tree on the left, Choose IP Phone Upgrade Management >
Configuration File Management.
2. Click Create and set related parameters in the Basic Information area.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
28
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
36/195
Figure 4-4 Configuration Information
l Enter the configuration file name in Configuration file name.
l Select Open or Close for Dynamic Cipher. This parameter is set to Close by default.
l Select the models of IP phones to be configured from IP Phone Type. Set parameters
of selected IP phone models in the corresponding panes.
For the description about IP phone parameters, see the corresponding Configuration
File Parameter Description.
For 7900 series and 8900 series IP phones:
l When Configuring Policy is set to Full, all parameters are valid in the configuration
file that is generated, and all the parameter values are delivered to the IP phones of the
matching models.
l When Configuring Policy is set to Specified item, only selected parameters are valid
in the configuration file that is generated, and the selected parameter values are delivered
to the IP phones of the matching models. The parameters that are not selected remain
unchanged.
3. After confirming the configurations, click OK .
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
29
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
37/195
If you can find the new configuration file on the Configuration File Management page,
the operation is successful.
----End
4.1.4 Associate Configuration Files with Subnets
This function allows you to associate a configuration file with multiple subnets. You can select
the configuration file that a subnet is to associate with based on the site requirements.
Prerequisites
l An IP phone subnet has been created.
l An IP phone configuration file has been created.
ContextThe function of associating configuration files with subnets is applicable to only IP phones that
are deployed using the automatic deployment function.
Procedure
Step 1 Choose Configuration > Unified Communications & Collaboration > IP PhoneManagement from the main menu.
Step 2 In the navigation tree on the left, choose IP Phone Upgrade Management > AssociateConfiguration Files with Subnets.
The system displays the subnet list.
Step 3 Select a configuration file from Configuration File Name next to Subnet Name and click Confirm.
The message Operation Success is displayed.
Step 4 Click OK .
----End
4.1.5 Connecting an IP phone to eSight
Before connecting an IP phone to eSight, set TR069 parameters on the IP phone.
l Manually set TR069 parameters. For details, see 4.1.5.1 Setting Parameters for
Connecting to eSight.
– If a domain name service (DNS) server is available onsite, configure the mapping
between the eSight domain name and IP address on the DNS server to complete TR069
parameter settings.
– If a Dynamic Host Configuration Protocol (DHCP) server is available onsite, set the
DHCP Option246 field to batch deliver TR069 parameters.
– If neither a DNS server nor DHCP server is available onsite, manually set TR069
parameters on the web page or liquid crystal display (LCD) screen of an IP phone.
l Automatically set TR069 parameters.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
38/195
If neither a DNS server nor DHCP server is available onsite and a great number of IP phones
are deployed, use the access scan function to batch set TR069 parameters.
eSight provides three connection methods for IP phones:
l
(Recommended) Automatic deployment: Create IP phone subnets on eSight. After youcreate IP phone subnets and set IP phone TR069 parameters, IP phones are automatically
added to the corresponding subnets.
l Batch import: In the template provided by eSight, add the IP address, physical SN, and
access gateway of each IP phone to connect to eSight and import information from the
template to eSight. For details, see 4.1.5.3 Adding IP Phone Devices in Batches. This
method is slightly time-consuming.
l Manual addition: Manually add each IP phone to eSight. This method takes more time and
is recommended only for the commissioning onsite.
4.1.5.1 Setting Parameters for Connecting to eSight
This section describes how to set parameters for connecting eSpace 8950s to eSight for unified
management.
Prerequisites
l All eSpace 8950s have been connected to the network, and have their IP addresses obtained
or configured.
l eSight has been deployed, and the user name and password for eSight login have been
obtained.
For details about how to deploy eSight, see the eSight Product Documentation.
Context
l If a DHCP server has been deployed, eSpace 8950 obtains the Application Control Server
(ACS) IP address (carried in the Option 246 field) and its own IP address from the DHCP
server. eSpace 8950 then resolves the ACS server address to obtain the eSight IP address.
According to the eSight server IP address, eSpace 8950 automatically sends a request for
connecting to eSight. Once eSpace 8950 is connected to eSight, its information is displayed
on the eSight management portal.
l If no DHCP server is available, you need to specify a static IP address for eSpace 8950 on
its LCD screen first. For details, see 3.3.4 Configuring the Phone IP Address.
l If a DNS server has been deployed, eSpace 8950 obtains the DNS server address and itsown IP address from the DHCP server, and sends a request to the DNS server for resolving
the enterprise domain name (for example,ucems.company.com) into the eSight IP address.
According to the eSight IP address, eSpace 8950 automatically sends a request for
connecting to eSight. Once eSpace 8950 is connected to eSight, its information is displayed
on the eSight management portal.
l If neither a DHCP server nor the DNS server is available, you need to manually set the
ACS IP address to the eSight IP address for eSpace 8950.
Connecting to eSight Using DHCP
eSpace 8950 is able to resolve the value of acs.address carried in the DHCP Option 246 field
to obtain the eSight IP address.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
39/195
l If the DHCP server installed on the Windows Server 2008 is used, set String value for the
Option 246 field to acs.address=http:// ACS server IP address: Port number /tr069/
services/acs, for example, acs.address=http://192.168.1.37:8089/tr069/services/acs. For
details about the setting, see 8.2.3 Setting Option 246 Parameters.
l If a switch is used as the DHCP server, set the DHCP server's Option 246 field toacs.address=http:// ACS server IP address: Port number /tr069/services/acs, for example,
acs.address=http://192.168.1.37:8089/tr069/services/acs.
Connecting to eSight Using DNS
If a DNS server has been deployed, add the default domain name ucems.company.com to the
DNS server and map ucems.company.com to the eSight IP address. For details about how to
add a DNS domain name, see 8.4 Setting Up the AD and DNS Servers.
If you have added the domain name, right-click the domain name and choose Properties from
the shortcut menu, as shown in Figure 4-5. In the window that is displayed, set the IP addressof the domain name to the eSight IP address.
Figure 4-5 Modifying domain name settings on the DNS server
NOTE
If you want to change the default domain name ucems.company.com to your enterprise domain name, for
example, uc.com, enter uc.com (company is a variable, which is the name of your company) in the Option 15
field of the DHCP server. The IP phone then automatically changes the domain name from the factory default
(ucems.company.com) to ucems.uc.com and changes the ACS address from the factory default (https://
ucems.company.com/tr069/services/acs) to https://ucems.uc.com /tr069/services/acs.
Connecting to eSight in Manual Mode
For eSpace 8950, the factory default of the ACS address is https://ucems.company.com:8444/
tr069/services/acs. In manual connection mode, replace ucems.company.com with the eSight
IP address according to the data plan.
l On the phone home screen, tap , choose APPLICATION > Settings, choose
ADVANCED > Server > ACS Server and modify the settings of ACS parameters.
l On the phone web page, choose Advanced > TR069 and modify the settings of ACS
parameters. For details, see 6.5.9 TR069.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
40/195
4.1.5.2 Access Scan
When a great number of IP phones connect to the eSight, the eSight uses the access scan function
to send auto-configuration server (ACS) addresses and certificate paths to the IP phones. After
IP phones automatically update their configurations based on the information received from the
eSight, the IP phones automatically connect to corresponding IP phone subnets.
Prerequisites
l An IP phone subnet has been created.
l IP phones of the correct models and versions are available.
NOTICE
The access scan function applies to eSpace 7910 IP phones and eSpace 7950 IP phoneswith the version V100R001C02 or later, and eSpace 8950 IP phones with all versions.
Context
Devices that are scanned for may not be IP phones because the eSight cannot distinguish device
types from the information sent by the scanned devices during scan access. This results in that
the number of scanned devices is different from the number of connected IP phones.
Procedure
Step 1 Choose Configuration > Unified Communications & Collaboration > IP PhoneManagement from the main menu. In the navigation tree, choose IP Phone Management >Access Scan.
Step 2 Config CPE user name and password.
1. Click next to the Operation.
The Edit information of scan config page is displayed.
2. Modify CPE User Name and CPE Password based on IP Phone device, click Confirm.
The default value of CPE User Name and CPE Password are huawei and huawei123.
Step 3 Click Add in Scan Parameters.
The Select IP Phone Subnet page is displayed.
Step 4 Click Add, select IP Phone Subnet, and click OK .
The system returns to the Select IP Phone Subnet.
Step 5 Click Next.
The Set Scan Segments page is displayed.
Step 6 Click Ports and click Confirm.
NOTE
eSpace 7900 series IP phones and eSpace 8950 IP phones all use port 8080.
Scan parameters are added successfully.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
41/195
To modify a segment to scan, click next to the segment. In the Attributes of scan
segment dialog box that is displayed, set Start IP, End IP, and Ports for the IP phones to scan,
and click Confirm.
Step 7 Select a mode to perform access scan for IP phones whose IP addresses are within the specifiedIP address segment.
l Immediate Scan: indicates that the access scan is performed immediately after the settings
are complete. This mode is recommended.
l Timing Scan: indicates that the access scan is performed regularly. The options are
Periodic, Daily and Weekly.
– When you select Periodic, you must specify the time when the access scan starts
periodically.
– When you select Daily, you must specify the time when the access scan starts.
– When you select Weekly, you must specify the time and day in a week when the access
scan starts.
l If you select both Immediate Scan and Timing Scan, the access scan is performed
immediately and then regularly as scheduled.
Step 8 Click Start.
The eSight starts the access scan to send ACS addresses and certificate paths to IP phones. After
IP phones automatically update their configurations based on the information received from the
eSight, the IP phones automatically connect to corresponding IP phone subnets.
----End
Result
Scan results are displayed in Scan Records.
l To view scan result details about a record, click in the record. The scan result details
include the start time, end time, time spent, total number of devices scanned, total number
of IP phones detected, and number of devices failed to be scanned.
l To search for required scan records, select a search type from the Search Type drop-down
list box and enter appropriate search criteria.
4.1.5.3 Adding IP Phone Devices in Batches
The eSight allows you to import IP phone devices in batches. Enter device information in the
Excel template provided by the eSight and import information in the Excel template to the
eSight. Then the eSight will automatically add the devices specified in the Excel template to the
corresponding subnets.
Prerequisites
Protocol parameters have been set on IP Phone devices.
Procedure
Step 1 Choose Resource > Add Resource > Import Resource from the main menu.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
42/195
Step 2 Choose Unified Communications > IP Phone.
Step 3 Click Download the Template to download the template to your local computer.
Step 4 Enter the IP Phone information in the template and save the template. For details about how to
fill in the template, see the Instructions sheet in the template.
Step 5 Click next to Resource file to import and select the Excel template.
Step 6 Click to upload the template.
Device information specified in the Excel template and the verification results are displayed in
Resources.
l If the Result column is empty for a device information record, the device information is
verified.
l If the Result column displays an error for a device information record, correct the informationin the Excel template and upload the Excel template again.
Step 7 Select the devices to be imported and click Create. The system starts to import the devices.
If subnets in the template exist in the system, the system adds devices to the matching subnets
directly. If a subnet in the template does not exist in the system, the system creates the subnet
and then adds relevant devices to the subnet.
l If the devices are created successfully, Add success is displayed in the Result column.
l If the devices fail to be created, the failure cause is displayed in the Result column.
----End
Result
1. Choose Resource > Resource Management > Unified Communications &
Collaboration from the main menu.
2. In the navigation tree on the left, select IP Phone Device. You can find that the IP phones
specified in the Excel template are displayed in the management object list.
4.1.5.4 Adding a Single IP Phone
After setting TR069 parameters on IP phones, you can manually connect the IP phones to the
eSight one by one.
Prerequisites
TR069 parameters have been set on IP phones.
Procedure
Step 1 Choose Resource > Add Resource > Add Resource from the main menu.
Step 2 Select Unified Communications and select IP Phone.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
43/195
Figure 4-6 Setting protocol parameters
Step 3 Set IP phone parameters by referring to Table 4-3.
Table 4-3 Description of IP phone parameters
Parameter Description How to Set
Basic
Informati
on
Subnet
Path
Name of the subnet that a singly
added device belongs to.
N/A
Name Name of the device that is added
singly
N/A
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
36
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
44/195
Parameter Description How to Set
Partition Name of the distributed eSight
standby node that a singly added
device associates with, that is,the value of Server name
entered when the Add a Server
function of the MainAst is used.
N/A
Media
gateway
Maps the Partition value of
each singly added device. You
do not need to set this parameter.
N/A
TR069
Protocol
IP address Indicates the IP address of the IP
Phone to be added.
N/A
Port Indicates the port that the IP
phone uses to receive requestsfrom the eSight.
The default value 7447 is
recommended.
Physical
SN
Indicates the physical serial
number (SN) of the IP phone.
l For 7900 and 8800 series IP
phones, use their physical
SNs.
l For 6800 and 7800 series IP
phones, use their MAC
addresses.
NOTE
The physical SN must be in the
format similar to000ea9100262. Do not enter
physical SN in other formats
such as 00:0e:a9:10:02:62;
otherwise, the device cannot be
added to the eSight.
User
name
Indicates the user name that the
IP phone uses to authenticate the
eSight.
Set this parameter to the value of
CPE User Name set on the IP
Phone.
The default value huawei is
recommended.
Password Indicates the password that theIP phone uses to authenticate the
eSight.
Set this parameter to the value of CPE Password set on the IP
Phone.
The default value huawei123 is
recommended.
User
Informati
on
Client
Number
Number associated with the IP
phone.
N/A
Step 4 Click OK .
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
37
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
45/195
NOTE
To create more devices, click Apply.
l If the device has been created successfully, the AddMO Success dialog box is displayed.
Click OK in the dialog box.
l If the device fails to be created, the Error dialog box is displayed, showing the failure cause.
Click OK in the dialog box and set device parameters again.
----End
Operation Result
Step 1 Choose Resource > Resource Management > Unified Communications & Collaborationfrom the main menu.
Step 2 In the navigation tree on the left, select IP Phone Device. The IP phone that you have added isdisplayed in the management object list on the right.
----End
4.2 Using DHCP Option 246
4.2.1 Batch Configuration
This section descr ibes how to configure eSpace 8950s in batches using DHCP Option 246.
PrerequisitesYou have prepared the following items:
l HTTP file server
For details about how to configure an HTTP file server, see 8.3 Setting Up an HTTP
Server.
l DHCP server
– You can use a switch to function as a DHCP server.
– You can also configure a DHCP server on the Window Server 2008. For details, see
8.2.1 Setting Up the DHCP Server (IPv4) in the Windows Server 2008.
l Version file, configuration file (Config-eSpace8950.xml), signal tone file and certificate
file of the target version for the specific phone model. For details, see 3.2 Required
Data.
l (Optional) DNS server
To use domain names in file URLs, prepare a DNS server. For details about how to
configure a DNS server, see 8.4 Setting Up the AD and DNS Servers.
NOTICEEnsure that Automatic Deployment (enabled by default) has been enabled for eSpace 8950s.
For details about how to enable Automatic Deployment, see 7.2.3 Automatic Upgrade.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
46/195
Context
After being connected to the DHCP server and powered on, eSpace 8950 sends a request to the
DHCP server for an IP address. In response, the DHCP server returns an IP address, together
with the URL of the UPF file (containing the addresses of the configuration file and the file
server) carried in the Option 246 parameter. eSpace 8950 then obtains the configuration filefrom the file server to update its configuration. If the UPF file also specifies other files (for
example, firmware version file) to update, eSpace eSpace 8950 also obtains these files for
configuration update.
Procedure
Step 1 Modify the configuration file.
In the configuration file, set related parameters (see Table 4-4 for detailed parameter
descriptions) based on the actual network environment. For details about the other parameters,
see eSpace 8950 IP Phone Configuration File Parameter Description.
Table 4-4 Parameter description
Parameter Description UC2.X IMS+UC
Phone.Envi
ronment
NetworkingEn
vironment
Indicates the
network
environment.
0 6
Phone.Serv
er
PrimaryRegSe
rverAddress
Indicates the
address of the
active registrar
server.
Enter the address
of the active
registrar server
with which the
phone account is
registered.
The setting is
automatically
pushed by the AA
server.
PrimaryRegSe
rverPort
Indicates the port
number of the
active registrar
server.
Enter the port
number of the
active registrar
server with which
the phone account
is registered.
Default: 5060
The setting is
automatically
pushed by the AA
server.
CallOutProxy
ServerAddress
Indicates the
address of the
active proxy call
server.
Optional. The setting is
automatically
pushed by the AA
server.
CallOutProxy
ServerPort
Indicates the port
number of the
active proxy call
server.
Optional. The setting is
automatically
pushed by the AA
server.
eSpace 8950 IP Phone
Administrator Guide 4 Selecting a Configuration Method
Issue 03 (2014-10-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
39
-
8/18/2019 ESpace 8950 IP Phone V100R001C00SPC200 Administrator Guide 03
47/195
Parameter Description UC2.X IMS+UC
PrimaryAASe
rverAddress
Indicates the
address of the
active AA server.
N/A. Enter the address
of the active AA
server.
PrimaryAASe
rverPort
Indicates the port
number of the
active AA server.