Sandvik TH680 TECHNICAL SPECIFICATION TH680-06 (12.11.2010) 1/3

Sandvik Mining and Construction reserves the right to change this

Note: Dimensions subject to box options

CAD

TURKU PLANT

1:250

XY

Box rear corner, heigh ca. 3800

Front bumber, height

Sandvik TH680 TECHNICAL SPECIFICATION TH680-06 (12.11.2010) 2/3

Sandvik Mining and Construction reserves the right to change this

Main dimensions Total length approx. 11600 mm (457) Width 3900 mm (154) Height 3600 mm (150) (unloaded)

(3900 mm with camera) Turning radius (space utilization) Outer 14200 mm (559) Inner 9200 mm (362) Ground clearance 265 mm (10) Weights Total loaded weight 138 000 kg (304 200 lb) Shipping weight 58 000 kg (127 900 lb) Axle weights without load

Axles 1-2 16 000 kg (35 300 lb) Axles 3-4 9 100 kg (20 100 lb) Axle 5 7 800 kg (17 200 lb)

Axle weights with load Axles 1-2 27 800 kg (61 300 lb) Axles 3-4 28 800 kg (63 500 lb) Axle 5 24 800 kg (54 700 lb)

Unit weight is dependent on the selected options Capacities Tramming capacity 80 000 kg (176 400 lb) Max speed with 138 000 kg (282 200 lb) total weight

30 km/h (19 mph) (speed limiter)

Box: Side tipping (heaped, SAE J1313) 48 m3 (63 yd3)

(struck, SAE J1313) 37 m3 (48 yd3)

Application requirements Maximum inclination/declination:

dumping place (sideways) 2% in work cycle (loaded) 2% when transporting vehicle (empty) 14%* * friction (depends on road conditions) can limit usable inclination/declination

Required road conditions Paved roads, IRI 8, no erosion gulleys or deep depressions

Usage, which differs from above requirements, has to be consulted with factory representative. Box motion times Raising time (side walls open + box up) 22 sec Lowering time (box down + side walls closed) 10 sec Driving gears forward and reverse Forward 6 gears Reverse 1 gear Max. speed forward 30 km/h (19 mph)

(speed limiter) Frame Torsion rigid heavy duty frame Height of side members 600 mm (24)

Engine Diesel engine Detroit Diesel S 60 Output 317 kW (425 BHP) / 2100 rpm Torque 2000 Nm / 1200 rpm Number of cylinders In line 6 Displacement 12 700 cm Cooling system Water cooled Combustion principle Four stroke/turbo, intercooler Electric system 24 V Exhaust system Double wall exhaust pipe,

catalytic purifier and muffler Fuel tank 509 litres (134 gal) Converter and gearbox Allison 4000 ORS Six speed, automatic

with autom. Lock-up Axles Driven axles 2 pcs Undriven axles 3 pcs Suspension Mechanical Inter-axle load compensation Standard tyres Tyres 20pcs 14.00R25 ***

Brand and type subject to availability Air pressure, all tyres 800 kPa (8 bar) (116 psi) Other type of tyres available to users choice. In certain applications the productive capabilities of the truck may exceed the TKPH value given by tyre manufacturer. Sandvik Mining and Construction Oy recommends that the user consult their tyre supplier to evaluate conditions and to find the best solution for application. Standard cabin ROPS / FOPS tested & certified, rubber mounted, pressurized, airconditioned and noice proofed, trainer seat, heater. Fire extinguisher 12 kg. Instruments Heavy duty switches and electrical analogue gauges Steering hydraulics Four steering axles, Hydrostatic steering, Emergency steering circuit Main components in steering system:

Main valve Servo control valve Steering and servo hydraulic pumps

Piston type

Pressure settings for: Main relief valve 18.0 Mpa (180 bar)

specification without further notice

CERTIFICATEDFIRM CERTIFICATEDFIRM

P.O. Box 434 20101 Turku, Finland Tel. +358 205 44 131 Fax +358 205 44 130

www.smc.sandvik.com

ISO 9001 ISO 14001 Sandvik Mining and Construction Oy

Sandvik TH680 TECHNICAL SPECIFICATION TH680-06 (12.11.2010) 3/3

Sandvik Mining and Construction reserves the right to change this

Box hydraulics Tipping 3 cylinders Upper side walls 2 cylinders Lower side walls 4 cylinders Pressure settings for:

Servo circuit Box hydraulics 18.0 Mpa (180 bar) Shock load valves 21.0 Mpa (210 bar)

Main components: Main valve Servo control valve Pump for box hydraulics Piston type Fittings ORFS

Steel piping with Aeroquip high quality hoses Oil coolers for hydraulic and steering oil Hydraulic oil tank capacity 390 l (103 gal) Brakes Service brakes are spring applied, hydraulically released multidisc wet brakes on all wheels with two separate circuits. Service brakes also function as an emergency and parking brake. Electrically driven pump for brake releasing. Main components in the brake system:

Pressure accumulator Brake pedal valve Charging valve Brake fluid tank 80 l (21 gal)

Standard equipment ROPS/FOPS certified cabin with A/C Noise levels: (ISO 6393-1985) (ISO 6394-1985)

Cabin 80 LAeq/dB Exterior 113 LAeg/dB

Alternator 24 V 150 A Batteries 2 x 12 V, 170 Ah Starter 6 kW Driving lights 4 front and 2 rear headlights Working lights 4 front and 2 rear working

lights Fire extinguisher 12 kg (CEN) Reverse alarm Automatic central lubrication Standard manuals Instructions Manual -Operator's Manual EU-languages -Maintenance Manual EU-languages Parts Manual English Service and Repair Manual English ToolMan CD, (2 pcs) In pdf format -Instructions Manual -Operator's Manual -Maintenance Manual -Parts Manual -Service and Repair Manual

Optional equipment * replaces standard equipment * Box side tipping with rubber lining

(heaped SAE J1313) 46 m3 (60 yd3) (struck SAE J1313) 35 m3 (46 yd3)

* Box side tipping with rubber lining (heaped SAE J1313) 57 m3 (75 yd3) (struck SAE J1313) 46 m3 (60 yd3)

Fire suppression system ANSUL, two-tank system with 8 nozzles (CEN). Auto engine shut down (DDEC) included

Load weighing device, Tamtron KAW 250M Load full warning light (with Tamtron) Reverse and loading camera Special tools Spare rim Spare wheel Pressure accumulator certificates Cat Base Spare part manual. LinkOne Spare part manual Additional Instructions, Workshop, Spare part manuals

and ToolMan CDs are available

specification without further notice

CERTIFICATEDFIRM CERTIFICATEDFIRM

P.O. Box 434 20101 Turku, Finland Tel. +358 205 44 131 Fax +358 205 44 130

www.smc.sandvik.com

ISO 9001 ISO 14001 Sandvik Mining and Construction Oy

Main dimensionsWeightsCapacitiesApplication requirementsBox motion timesDriving gears forward and reverseFrameEngineConverter and gearboxAxlesSuspensionStandard tyresStandard cabinInstrumentsSteering hydraulicsBox hydraulicsBrakesStandard equipmentStandard manualsOptional equipment