etc sp10 6.6 daniel
DESCRIPTION
This is how to make a tower. A famous tower.TRANSCRIPT
First you got to put a tube down on the ground.
Second, you must stretch the tube (only height and a bit of the width
needs to be changed).
Third, you must attach a cone, turned upside down and stretched to the right size, to the top of the tube.
Fourth, you must lay a square on the ground and only stretch it sides ways,
and flatten it a bit.
Fifth, you must lay a second square on the ground and stretch it only side
ways (you also have to make it half as thick as the first square).
Like This.
Sixth, you must drag the tube and the cone ,attached, on top of the two
squares (the squares are also linked).
Optional: You can texture it if you wish (kind of like this).
Seventh, you must put a half sphere on the ground and turn it so the flat side is facing away from the tube (by now the tube, cone and two squares
should be linked).
Finally, bring the half square on the tower and shazam! You got a doorless
tower for a long haired girl (you can color the window or chose a texture,
doesn’t matter).
This should be the size compared to the globe at 2.500 all around.