etichette dei cavi dei servizi c.luci sistema di allineamento etichettatura dei cavi proposta di...
TRANSCRIPT
Etichette dei cavi dei serviziC.Luci
•Sistema di allineamento•Etichettatura dei cavi•Proposta di passaggio dei cavi
RASNIK SYSTEMRASNIK SYSTEM
- The RASNIK system consists of : Rasled (IR led+mask), lens, Rascam (CMOS camera) + DAQ (Icaras)
RASLED RASCAM
BARREL ALIGNMENTBARREL ALIGNMENT
• Inplane system : Monitoring of MDT chamber deformation
•The BIM-BIR connections (Precision < 30 m)
• Praxial System (Proximity + axial) : Link MDT chambers of a given layer (Precision < 30 m)
• Projective system:Link the 3 layers of large MDT chambers (BIL,BML,BOL) for sagitta correction (Precision < 30 m)
•The reference system for absolute position (Precision < 0.5 mm)
Projective lines
(RASNIK)
Axial lines(RASNIK)
Alignment at H8
H8: 3D view H8: top view
3
• Atlas : 4 projective rays in the half-barrel
• H8 : special situation with 6 projective rays on two towers up to 4 proj. platforms on chambers
•H8: praxial + inplane
Atlas: standard sector
BIL
BML
BOL
BIL
BML
BOL
~ 0
~
0
Projective platforms
BIL Roma
BML
(Led)
LenteCCD sulle BOL
BOL BML
CCDLente
Led
BIL BIL0
Non ci sara’
Inplane
X
Y
Sistema di riferimento dei CCD
CCD 0
Crossplates
Long beam
LED+masks
Image sensor
Lenses
1 2 3 4
CCD 1
η= 0
HV
RO
4 cavi LED 2 cavi CCD
X
Y X
Y
Ccd 0 Ccd 1
BIL
Praxial: Goals & Requirements
Translation Rotation
X 100 m 100 rad
Y 10 m 500 rad
Z 10 m 500 rad
*
**
**
z
x
y
* Along wires: second order effect on sagitta computation
** Higher accuracy obtained with 2 adjacent systems
Remarks
The praxial system is used to unite a layer of chambers fo form a single “rigid” layer
•Proximity system
•Axial system
Required accuracy on proximity
Praxial Systemccd
led
lens
Ccd axial led axial
No precision for the positioning of optical elements A calibration is needed
2 cavi ccd 1 cavo led
1 cavo ccd 2 cavi led
Axial rays
BIL Praxial pictures
Roma
Pavia
lens
ledAxial lens
Cavi schermati per i ccd
Problema per far passare tutti i cavi senza disturbare le linee ottiche
piattaforma
Axial rays
Praxial in the BML
Sulla BML e BOL la piattaforma e’ incollata su ML1
Cavi !!!
(n.b. la foto e’ relativa ad una BOL)
zImage sensorLensLED-Mask
BIL-BIS Standard sectors (e.g. sectors 1-2)HV side
Side A
BIS6BIS5BIS4BIS3 BIS7 BIS8BIS1 BIS2
RO side
HV side
projective
BIL6BIL5BIL4BIL3
Reference system
projective
BIL-BISconnection
RO side
BIL1 BIL2
Projectiveplatform
B-sensor platforms
15/05/2002
z
Image sensorLensLED-Mask
BML-BMS Standard sector (e.g. sectors 1-2)
BMS6BMS5BMS4BMS3BMS1 BMS2
projective
BML6BML5BML4BML3BML2
Reference system
BML-BMSconnection
BML1
HV sideSide A
RO side
HV side
RO side
Projectiveplatform
B-sensor platforms
cutouts
BML-BMSconnection
15/05/2002
Axial system in H8
BML BIL Roma
Axial led
Rasmux
DCS
Rasmux
I cavi vanno numerati seguendo uno schema generale (va stabilito)
Sulle BML il rasmux si trova sul crossplate
Manca il CSM e la distribuzione del HV
8 canali CCD
8(*2) canali LED
Etichette cavi inplane
LED CCD
C Aη=0
MDT
0 1 2 3
0 1
MDT
0123
01
INPx (x=0,1,2,3) INPx (x=0,1)
I cavi LED si distinguono dai CCD dalle dimensioni e dai connettori
n.b. come suggerito da Harry e Florian
Lato HV
Lato RO
Guardiamo da sopra o da sotto?
Etichette axial-praxial
MDT η Camere ACamere C
RO
HV
AROCRO
AHVCHV
PRA_CHV : cavo praxial (CCD o LED) angolo CHV
AXI_CHV : cavo axial (CCD o LED) angolo CHV
Identificazione dei 4 angoli della camera secondo Florian Bauer
Projective e Reference Lables
zImage sensorLensLED-Mask
BIL Standard sectors (side A)RO side
HV side
projective
BIL6BIL5BIL4BIL3
Reference system
projective
BIL-BISconnection
RO side
BIL1 BIL2
B-sensor platforms
Projective: PRO_HV e PRO_RO
Reference: REF_HV e REF_RO
BIL-BIS LableReference system
Projective RASNIK mask(ray 2,3,4)
BIL
BIS
BIS-BIL connection
Projective RASNIK mask (ray 1)
Praxial
B-sensor
B-sensor
BIL-BIR: BLS_HV e BLS_RO
B sensors: BFL_HV e BFL_RO
Cavi BIL (alignement)CCD LED Lable
Inplane 2 4 INPx
Proximity 4 4 PRA_yzz
Axial 2 2 AXI_yzz
Projective -- 2 PRO_zz
Reference -- 2 REF_zz
BIL-BIS -- 2 BLS_zz
x=0,1,2,3 y=A,C zz=HV, RO
n.b. Il numero ed il tipo dei cavi dipende dalla posizione della camera
Caveria a livello spacer (BIL)