euro - vinnybyrne.com · • rsp price €311.95 on-vehicle hydraulic pipe flaring tool set free...

Promotion Code: AWS14.EUAll prices + VAT unless stated otherwise2

• Designed for the removal of stubborn fourandfive stud hubs and brake drums on cars and light commercial vehicles.

• Includes 4.3kg slide hammer, manual force screw and two sizes of stud.

• Stud Sizes: M12 x 1.5, M14 x 1.5mm.

• Model No. VS3700• RSP Price €324.95

Slide Hammer/ Hub Puller Set

• Allows the piston to be held safely in the extended position when replacing internal rebound spring shock absorbers (MacPherson Strut).

• These shock absorbers are used to reduce vehicle roll and in some cases replace the use of the anti-roll bar which is becoming more popular on modern vehicles.

• Features a piston shaft clamp with nylon jaws and telescopic puller.

• Max. Piston Shaft Size/Puller Extension: Ø16.5mm/60mm.

• Applications: BMW, Fiat, Ford, Mercedes, Nissan, Peugeot, Toyota.


Rebound Spring Strut ToolNew

• Suitable for the removal/installation of the front lower control arm bush on BMW 3 Series.

• Can be used in-situ without removing the arm from the vehicle.

• When installing the new bush, they must be held compressed while being pressed into the suspension control arm which this tool is designed for.

• Model No. VSE5586• RSP Price €181.95

Front Lower Control Arm Bush Tool BMW 3 Series

New

• Compact design for use on wishbone suspension using access points in the rear suspension arm.

• Includes two pairs of carefully shaped yokes that prevent the coil spring from bowing and a drive extension for use in restricted areas.

• Size/Suitability: Ø60-170mm.

• Jaw Opening: 30-245mm.

• Drive: 20 & 23mm Hex.• Model No. RE2281• RSP Price €259.95

Coil Spring Compressor Wishbone Suspension 1000kg Capacity

New

€181.95 EXC. VAT

€181.95 EXC. VAT

€129.95 EXC. VAT

€227.45 EXC. VAT

3Promotion Code: AWS14.EU All prices + VAT unless stated otherwise

• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford vehicles.

• Can be used in situ without removing the arm from the vehicle.• Also suitable for some Volvo vehicles that share the

same Ford platform.• Model No. VSE4784• RSP Price €324.95

Trailing Arm Bush Tool Ford Mondeo MK4

• Steel and cast aluminium construction.• Measures toe-in and toe-out by contact

with wheel rims and optical sight to alignment markers.• Works on practically all cars and light commercial

vehicles with rim diameters between 200mm and 600mm.• Model No. GA40• RSP Price €1007.45

Optical Wheel Alignment Gauge

New

• Heavy-duty coil spring compressor with hardened steel body and force screw.

• Ensures smooth compression of spring.

• Maximum Capacity per Pair: 1000kg.

• Model No. AK3845• RSP Price €168.95

2pc Heavy-Duty Coil Spring Compressor Set 1000kg/Pair

• Ideal when the tie rod has nohexorflatsanda spanner cannot be used.

• Features a spring loaded jaw which grips tighter as more force is applied.

• Length: 410mm.• Maximum

Capacity: 22mm.• Model No.

VS4005• RSP Price

€90.95

Track Rod Adjusting Grips

• Safety restraint system designed for use with Sealey Model No’s RE231 and RE232 Coil Spring Compressors.

• Quickly installed and fast and simple to operate in use.

• Model No. RE23RS• RSP Price €64.95

Coil Spring Compressor Restraint System

• 1500kg Capacity foot-operated hydraulic unit.

• Quicker and easier than using ratchet driven spring compressor.

• Plastic coated yokes reduce the risk of spring slippage/damage.

• Suitable for springs from Ø102mm to Ø160mm.

• Model No. RE231• RSP Price €389.95

Hydraulic Coil Spring Compressing Station 1500kg Capacity

FREECoil Spring Compressor Restraint System

• Model No. RE23RS

• RSP Price €64.95

• Innovative tool saves time, money and frustration.• Installs CVJ boots without removing drive shafts

from the vehicle or the CV joint from the drive shaft. • Save on labour time by up to 70% and prevent

damage to CV joint. • Model No. BSL103• RSP Price €194.95

CVJ Boot Tool

Universal Stretch CVJ Boot X 2

• Model No. CV96


FREE

BEST SELLER

(Illustration for display purposes only and not included in kit.)

€649.95 EXC. VAT

€64.95 EXC. VAT €123.45 EXC.

VAT

€144.95 EXC. VAT

€227.45 EXC. VAT

€51.95 EXC. VAT

€289.95 EXC. VAT

All prices + VAT unless stated otherwise Promotion Code: AWS14.EUAll prices + VAT unless stated otherwise4

• Innovative dual purpose tool designed to push and wind back brake callipers.

• Lightweight and durable materials enable the tool to work on most common calliper designs.

• Suitable for use on either left or right handed wind back callipers.

• Supplied with four common adaptors but compatible with all 2-pin magnetic adaptors in the Sealey range, making the tool truly versatile.


5pc Brake Piston Wind-Back Tool Kit

• Enables retraction of the piston on rear brake callipers.

• Helps prevent damage to pistons and seals.

• Speciallowprofiledesignfor VAG vehicles.


Brake Wind-Back Tool Low Profile VAG

• Precision made adaptor plates with thrust bolt assembly and reaction plate suitable for push-back and wind-back brake pistons.

• Helps prevent damage to pistons and seals.



• Measures disc thickness (external) and small/medium sized drums (internal).

• 11mmHighfiguresinLCDdisplayforeaseofreading.• Metric or Imperial read-out with ‘Hold’ function.• Zero setting control allows for comparative measurement.• Range: 0-300mm(0-12”).• Battery: SR44 - 1.5V.• Model No. VS0567• RSP Price €259.95

300mm/12” Digital Brake Disc & Drum Calliper

• Measures disc thickness (external) and small drums (internal).

• Metric or Imperial read-out with ‘Hold’ function.

• Zero setting control allows for comparative measurement.

• Range: 0-150mm(0-6”).• Battery: SR44 - 1.5V.• Model No. VS0566• RSP Price €155.95

150mm/6” Digital Brake Disc & DRVM Calliper

• Ideal for quickly checking the thickness of the brake pad lining.

• Colourcodedbladesfitbetween the disc and brake pad backing plate.

• Dual marked in Metric and Imperial.


8pc Brake Pad Thickness Gauge

• Suitable for removal and installation of locking rings on drive shafts when removing CVJ.

• Replaceable tips allow use on other circlip applications.


Brake Cylinder/CVJ Circlip Tool

• Used to hold the brake calliper away from the hub when replacing brake pads.

• Simply hang the calliper hook onto a suitable suspension component to hold the calliper out of the way and also stop the weight of the calliper damaging the brake hose.

• Supplied with 2 brake calliper bolt retaining tags.


2pc Calliper Support Hooks

• Suitable for push-back and wind-back brake pistons.

• Left-handed thrust bolt required for Citroen, Ford, and Renault applications.

• Precision made adaptor plates with thrust bolt assembly and reaction plate.



FREEPneumatic VacuumBrake Bleeder 1ltr

• Model No. VS020

• RSP Price €51.95 €162.45 EXC.

VAT

€49.95 EXC. VAT €64.95 EXC.

VAT

€90.95 EXC. VAT

€129.95 EXC. VAT

€12.95 EXC. VAT€6.45 EXC.

VAT

€23.45 EXC. VAT

€5.45 EXC. VAT


• Powered by the vehicle’s own 12V DC battery.

• Allows single-handed bleeding of the vehicle’s brake or clutch system andunitisfittedwithalong,high pressure hose.

• Bleed pressure is closely controlled up to 2.5bar - suitable for most vehicles (even those with ABS).

• Unitfittedwithauto-shut-offdevicetoprevent the system running dry and is supplied with a variety of European, Japanese and US vehicle adaptors, bleedbottleandfluidextractor.

• Tank Capacity: 2ltr.• Cable/Hose Length: 4/5mtr.• Model No. VS0207• RSP Price €844.95

12V Brake & Clutch Pressure Bleeding Kit

• Simple, one man operation using standard workshop air supply (90-120psi).

• Does not require specialised brake reservoir caps.

• Drawsfluidfromthebleednippleenablingeitherbleedingorfullreplacementoffluidinsystem.

• Includes reservoir top-up kit guidance notes.• Model No. VS021• RSP Price €77.95

Pneumatic Vacuum Brake & ClutchBleeder Kit with ReplenishmentSystem

• Alloy body with steel clamp arm.• Compactdesignallowsuseinconfinedspaces.• Rounded jaw edges prevent damage to internal hose

reinforcement.• Suitable for use on fuel, vacuum

and brake hoses.• Model No. VS037• RSP Price €14.65

FREE30pc Brake Piston Wind-Back Tool Kit

• Model No. VS0285


• Composite collection bottle with wide base for added stability.

• Features a one way valve to reduce air re-entering the system, clear hose to evaluate the condition of the bledfluidandpresenceofair,airvent located in the lid, two hanging hooks and drain cap for simple emptyingofoldbrakefluid.

• Hose Length: 1mtr.• Model No. VS0212• RSP Price €35.05

500ml Brake Bleeding Bottle

• Produces accurate automotiveSAEflareson3/16” pipes.

• Lightweight body makes it ideal for splicing in replacement sections of brake pipe on-vehicle.

• Suitable for steel pipes.• Model No. PFT12• RSP Price €77.95

On-Vehicle Micro Pipe Flaring Tool

• Produces accurate automotive SAE and DINflareson3/16”and 4.75mm pipes respectively.

• Small body makes it ideal for splicing in replacement sections of brake pipe on-vehicle.• Features a hydraulic ram which also makes it suitable for steel pipes.• Model No. PFT10• RSP Price €311.95

On-Vehicle Hydraulic Pipe Flaring Tool Set

FREE8pc Brake Piston Wind-Back Tool Kit


• Fast, accurate and simple bending of brake pipe - even on the vehicle.

• Bends 3/16”(4.75mm) and 1/4” brake pipe up to 90°.

• Forged steel jaws with anti-corrosionfinish.


Pipe Bending Pliers

• Idealforin-lineapplicationssuchasbrakepipefittings.• Works on rounded, worn and rusted nuts unlike other types offlarenutspannerwhichrelyonthepointsofthehexbeing in good condition.

• Featuresonefixedand oneflexi-endforeaseofuse.


11mm Ratcheting Flare Nut Spanner

2pc Hose Pinch Tool Set

€23.45 EXC. VAT

€188.45 EXC. VAT €59.95 EXC.

VAT

€45.45 EXC. VAT

€610.95 EXC. VAT

€9.95 EXC. VAT€25.95 EXC.

VAT€32.45 EXC. VAT


Cooling System & Cap Testing Kit

New

• Reinforced long reach tool designed to get to awkwardly positioned tag type hose clips.

• Flexible cable and compact head help operationinconfinedspaces.

• Features ratchet action for close control.• Flexible Shaft Length: 500mm.• Model No. VS1670• RSP Price €64.95

Heavy-Duty Remote Action Hose Clip Tool

• Eliminates the introduction of bubbles and air-locks into the cooling system and dramatically reducessystemfillingtime.

• Automatically conducts system leak test.• Lowprofiledesignbroadensapplicationrangeespecially

for use on MPVs where lower windscreen lip might obstruct other tools.• Suppliedwith1300mmfluidhose.• Model No. VS0041• RSP Price €136.45

• Suitable for Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Seat, Skoda, Suzuki, Toyota, Vauxhall/Opel, Volvo, VW. Alsoincludesnon-specific adaptors for other makes.

• Kitfeaturesadaptorsfitted with quick-release couplings and high-powered pump with large, easy-to-read dial.


Cooling System Filler

25pc Cooling System Pressure Test Kit

• Multi-purposecoolantfillingsystem,suppliedwithsixreservoir adaptors,tofitpopularsizesofreservoir.

• Builtinshutoffvalveandcleverlydesignedflowpipesystemhelpsprevent air locks.


AutomotiveCoolant/Filler Set

FREE17ltr Antifreeze/Fluid Drain Pan

• Model No. DRP04• RSP Price €28.55

• Diagnose blown gaskets and cracked blocks and cylinder heads easily and quickly.

• Checks for CO2

in cooling system and indicates its presence by test fluidcolourchange.

• Use with cone adaptor or in conjunction with radiator caps from the VS006 set.

• ForTestFluidRefillorder Model No. VS0061F.


Combustion Leak Detector

• Suitable for removal of tag and wire type hose clips. • Features ratchet locking mechanism for easy use on lower

radiator hoses.• Swiveljawsallowusewhereaccessisconfined.• PVC dipped handles for

improved grip and comfort.• Model No. VS166• RSP Price €15.30

Hose Clip Pliers

• Heavy-dutyspringloadedpliersforfittingandremovingClic® and Clic-R® hose clips.

• Changefromfittoremove(andbackagain) simply by turning the pliers over in your hand.


Heavy-Duty Hose Clip Pliers Clic® Compatible

• Superbtooldesignedtohelpremovehosesfittedwithconstant pressure type hose clips widely found on modern vehicles.

• In use, the tool is fast and effective.• Useyourfingersor1/4”Sqdrive

to open the clips.• Model No. VS1669• RSP Price €32.45

Spring Hose Clip Tool

BEST SELLER

• Capless cooling system tester uses aninflatablebladder to seal the pressure head to the radiator or header tank.

• Bladder system can be used on both screw and bayonetfittingsandseals90% of cars and light commercial vehicles straight out of the box.


€227.45 EXC. VAT

€90.95 EXC. VAT €45.45 EXC.

VAT

€207.95 EXC. VAT

€79.95 EXC. VAT€64.95 EXC.

VAT

€9.95 EXC. VAT €15.95 EXC.

VAT €16.95 EXC. VAT


• Allows the technician to pinpoint all manner of system leaks including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems.

• Features single button operation,flowcontrolvalve and auto power off.

• Uses mineral oil and shop air to generate smoke at low pressure while connected to a vehicle.

• System is clean and quick to use and connects to a 12V vehicle battery.

• Rubber Cones Sizes (Ø): 10-45, 30-65, 50-85, 70-100mm.

• Mineral oil not supplied.• Model No. VS870• RSP Price €1039.95

Smoke Diagnostic Tool Leak Detector

• Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system.

• Kit supplied with four pairs ofsteppedadaptorstofitmost sizes of hose.

• Features a pressure gauge, shut off valve and pressure release valve.

• Can also be used on cooling system hoses.


Turbo System Leakage Tester

• Professional antifreeze tester.

• Thermometer built-in for calibration.


Ethylene Glycol Antifreeze Tester Tube Type

• Useful 2pc set with chromefinishshafts and comfort grip handles.

• Ideal for the removal of coolant hoses, O-rings and seals.


2pc Hose Removal Hook Set

FREEMini Hook Set 4pc


• Designedforclampingflexiblehoses.• Features rounded clamp section to prevent

damage to internal hose reinforcement.• Extra-longdesignallowsuseindeepconfinedspacesand

large adjusting knob enables easy operation.• Suitable for brake, coolant,

fuel and vacuum hoses.• Model No. VS0371• RSP Price €32.45

Extra-Long Hose Clamp

• Speciallydesignedforstraighteningthedelicatefinsfoundon automotive radiators, air conditioning condensers, oil coolers and intercooler grills ensuring optimum performance.

• Six different comb sizes.• Also suitable for domestic and

industrial air conditioning and heat exchange applications.


Radiator Fin Straightener

• Combination tool suitable for removing thermo-viscous fan hubsasfittedtoBMW,FordandVauxhall/Opelvehicles.

• Sizes: 32, 36mm• Model No. VS0923• RSP Price €22.05

32 & 36mm Viscous Fan Hub Tool

• Folds away neatly with hook and loop straps when not in use.• Folded Size (L x W x H): 660 x 444 x 35mm.• Open Size (L x W x H): 1220 x 444 x 35mm.• Model No. VS860• RSP Price €59.75

Foldable Mechanic’s Mat with Headrest

FREEEOBD Code ReaderMemory Graphics

Infrared Laser Digital Thermometer 12:1

• Model No. VS8802


• Model No. VS900


€16.95 EXC. VAT

€38.95 EXC. VAT €7.95 EXC.

VAT

€81.95 EXC. VAT

€779.95 EXC. VAT

€6.45 EXC. VAT

€14.45 EXC. VAT€5.95 EXC.

VAT


• High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks.

• Chargecyclehas9profilesdesignedtooptimisethe condition of the battery and the speed of the charge.

• It will recover a discharged battery (>2V) to almost 100% of its original capacity.

• Designed for use with lead acid and lead calcium batteries including WET, GEL, AGM and VRLA types on 12V and 24V systems.

• Temperature sensor allows accurate charging of battery even when battery is cold.

• Safety circuitry prevents sparks or polarity reversal.• Model No. BSCU25• RSP Price €324.95

Battery Support Unit & Charger 12V-25A 24V-12.5A

FREEProfessional WaterResistant storageCase -Small

• Model No. AP612


• One of the most competitively priced, PC-based scopes around and suitable for professional applications.

• High sample rate, multiple memory function and 4-channel display make this unit ideal for in-depth analysis of a variety of automotive sensors and components, and can be used with any compatible lap-top or PC.

• The scope also features a comprehensive collection of standard automotive diagnostic procedures, turning an otherwise complex process into a click of a button.

• The system is loaded with specimen waveforms allowing the operator to compare actual results with those expected.

• The 4-channel function allows multiple components to be compared simultaneously.

• Can be connected using a LAN cable (supplied) to any PC running the appropriate software version.

• The scope is supplied with a wide selection of automotive type test leads, connectors and probes.

• Model No. TA4000• RSP Price €1299.95

• Specially designed for hybrid vehicles and conforms to EN61010 CAT III (1000V) and CAT IV (600V).

• Unlike other multimeters this unit has an insulation test function that allows testing of the insulation of the high voltage wires found on hybrid vehicles.

• Can be used as a stand-alone device or linked wirelessly with a USB interface to a PC or laptop enabling results to be graphed, saved or printed.

• The unit also has the usual functions expected on a high quality multimeter including true RMS (Root-Mean-Square) and IP67 waterproof rating.


4-Channel Automotive Diagnostic Oscilloscope

• Comprehensive set of test leads and components suitable for testing, isolating and evaluating automotive electronic circuits.

• Includes standard Ø4mm banana style plugs and sockets suitable for use with most diagnostic multimeters and test equipment.

• Supplied in sectioned carry-case for quick location of components.


92pc Test Lead Set

• Simple to use oscilloscope that allows observation of constantly varying signals from vehicle components and sensors.

• With a bandwidth of 20MHz the unit is suitable for detecting CAN signals on modern vehicles.

• Functions include date hold, record and USB interface for downloading data to PC.

• This versatile unit also has a built in multimeter with large digit display and bar graph.

• Supplied with 3-pin UK and 2-pin European charger leads.


Hand-Held Automotive Single Channel Oscilloscope & Multimeter

FREE12mm 20A/80A AC/DC Current Clamp

• Model No. TA310


Digital Automotive Analyser/ Insulation Tester - Hybrid Vehicles

BEST SELLER

€233.95 EXC. VAT €389.95 EXC.

VAT

€649.95 EXC. VAT

€675.95 EXC. VAT€207.95 EXC.

VAT


• Designed for use with a standard multimeter and measures current draw from vehicle components in situ.

• No need to break into the circuit.• Fitted with 4mm banana connectors and

supplied in storage pouch.• Powered by 9V battery (supplied).• Can also be used with an oscilloscope

using a suitable BNC conversion adaptor.

AC/DC Current Clamps

• Fast, accurate and safe current measurement at the fuse box.• Idealforfault-findingoncarandcommercialvehicleelectricalcircuits.• Includes hold and peak functions for detecting current surges.• Features large LCD display with digital and graphical current read out. • Plugs straight into the vehicle’s fuse board and supplied with Mini, Standard

and Maxi style blade adaptors.• Range: 0-80A - 0-48V.• Model No. TA125• RSP Price €124.75

Current Tester 80A

• Health test for 4 and 5 pin electro-mechanical relays commonly found on modern vehicles.

• Test feature will cycle the relay ten times, testing the resistance, contacts and consistency within each cycle.

• If a cycle fails on the test then this will be indicated by a red LED and alternatively a green LED if relay works.


Relay Tester

• Polarity protected unit attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicle’s own battery is disconnected.

• This device saves valuable time spent re-programming lost codes.

• Features surge protection and three LEDs to indicate power supply status.


Diagnostic Socket Memory Safe - EOBD

• Designed to test the COP (Coil On Plug) on modern vehicles.

• Battery operated, hand-held tester which quickly and easily diagnoses if a COP is producing a suitable spark to the plug.

• Simply place the pad on the COP while the engine is running.

• Features sound and visual signal recognition.


Coil On Plug Tester

• Tests Zirconia and Titania lambda sensors and ECU.• Suitable for 1, 2, 3 and 4 wire sensors, heated and unheated.• Simulates rich or lean mixture signals to check ECU response.• Insulation-piercing clip for quick and easy connection plus displaytoconfirmwireidentity.

• Features a low battery indicator and powered by 9V battery (supplied).


Lambda Sensor Tester/Simulator

Model No. Type RSP Price EXC. VAT

CBM Code Breaker Manual €83.15 €58.45SRM Service Reset Manual €77.95 €55.95DSLM Diagnostic Socket Location Manual €45.45 €29.95

Model No. SRM

Manuals

Mod

el N

o. T

A31

1

No VAT on Books

Mod

el N

o. T

A31

0

Model No. Size Clamp Size Power RSP Price EXC. VAT

TA310 12mm Ø12mm 20A/80A €110.45 €77.95TA311 28mm Ø28mm 40A/400A €103.95 €71.45

Model No. DSLM

Model No. CBM

€81.95 EXC. VAT

€71.45 EXC. VAT

€25.95 EXC. VAT

€68.95 EXC. VAT

€77.95 EXC. VAT


• Ideal for the professional tradesman and technician.• Ø8.5mm Digital output camera module ensures

low-loss transmission of images to the hand-set and gives great image quality with excellent colour balance and contrast.

• Record and replay still and video images on the handset or stream live video via the USB/AV connection.

• 128Mb Integral memory allows the storage of up to 80 images or 90sec of video on the handset - use a Micro SD card (not included) in the expansion slot to increase your storage capacity if required.

• Featuresdigitalzoomcontrolandrotate/flipcontrol of the image - ideal for use in a tight spot or with a mirror.

• Supplied with an AV-out cable and USB cable to allow connection to a PC to capture, store and share images and video.

• Kit includes a 45° mirror, hook and magnetic pick-up attachment.• Powered by 4 x AA batteries.• Model No. VS8220• RSP Price €259.95

Ø8.5mm ProScope 1 Digital Borescope

Ø4.5mm Digital Borescope Pro Diesel Engine Kit

• Quick and simple location of air, water, dust leaks.

• Place the transmitter in the vehicle and close the doors and windows.

• Trace the detector around outside of the screen, windows and door seals to locate the leak.

• Transmitter and detector powered by 9V Lithium batteries.

• Model No. PP4• RSP Price €90.95

Ultrasonic Leak Detector

FREEMechanic’s Stethoscope

• Model No. AK871


• Detects radio frequency and/or infrared emission from key fobs and remote controls.

• Suitable for a wide variety of vehicle and electronic/electrical applications.

• Detects new BMW frequencies.• Powered by 9V battery

(not included).• Model No. VS921• RSP Price €51.95

IR & RF Key Fob Tester

• Find short and open circuits fast and easily.

• Simply attach the sender unit to the circuit and follow the wires using the detector.

• Ideal for automotive repairs.• Suitable for all

DC circuits up to 42V.• Supplied in carry-case.• Powered by two 9V batteries.• Model No. FF400• RSP Price €61.05

6-42V Open & Short DC Circuit Detector

• Used to detect the pulse from the fuel pipes of diesel fuel injectors.

• Works on most direct injection diesel engines fittedwith6mm1/4”to 10mm 3/8” external fuel pipes.

• Suitable for use with most timing lights, engine analysers and multi-meters that have an inductive pick-up.

• Model No. TL95• RSP Price €175.45

Timing Light Diesel Converter Box

• Large LED digital display.• Reads dwell, advance, voltage and rpm.• Mode for two-stroke and distributorless,

‘lost spark’, four-stroke engines.• Detachable clamp-on inductive pick-up.• Model No. TL93• RSP Price €175.45

Digital Timing Light with Tach/Dwell/Advance/Volt

ProbeØ8.5mm

ProbeØ4.5mm

ZoomBrightness Colour Colour

Video Playback

Video

Camera

128mb

InternalMemory

USBConnection

AV Out

DigitalProbeDigital

Camera

SDStorage

Not Included• Suitable for internal inspection

of modern small diesel engines where access to the cylinder can be quickly made through the aperture left by removal of the glow plug.

• Features an obedient probe with an illuminated camera head diameter of just 4.5mm suitable for most small engine applications.

• Rugged handset with IP64 dust/water rating includes controls for the LED probe lighting and camera zoom.

• Live images from the camera head are displayed on a crystal clear screen and may be viewed/saved externally using the AV cable supplied.

• Optional Ø3.9mm probes in either forwardvieworsideviewconfiguration are available as an option.

• Supplied in a carry-case.• Uses 4 x AA batteries (supplied).• Model No. VS8200• RSP Price €519.95

€168.95 EXC. VAT €350.95 EXC.

VAT

€32.95 EXC. VAT€38.95 EXC.

VAT€64.95 EXC. VAT

€116.95 EXC. VAT €111.95 EXC.

VAT

euro - vinnybyrne.com · • rsp price €311.95 on-vehicle hydraulic pipe flaring tool set free...

Documents