DB

A

C

Euroline (Deluxe) Tandem 7500 8500 9500 10500 12500 14000 15000 16000 17000

7,5 8,5 9,5 10,5 12,5 14 15 16 17

7095 7105 7120 7130 7135 7250 7235 7250 7260

4470 4490 4520 4530 4540 5520 5540 5575 5500

3110 3210 3310 3420 3530 3430 3580 3685 3790

1500 1600 1700 1800 1900 1800 1900 2000 2100

2x90/10 2x90/10 2x90/10 2x100/10 2x100/10 2x150/10 2x150/10 2x150/10 2x150/10

4500 4700 4850 5000 5300 6000 5600 6000 6000

Euroline (Deluxe) Tandem 18000 20000

18 20

7260 7265

5590 5640

3790 3900

2100 2200

2x150/10 2x150/10

6000 6600

www.peecon.com 23

Capacity m3

Total length (A) mm

Tank length (B) mm

Height (C) mm

Tank diameter (D) mm

Axle / bolts mm / no.

Weight kg

Capacity m3

Total length (A) mm

Tank length (B) mm

Height (C) mm

Tank diameter (D) mm

Axle / bolts mm / no.

Weight kg

20.505 23.20521.195 23.895 21.885 24.58023.475 26.175 24.845 27.545 26.325 29.02527.805 30.505 29.250 31.945 30.750 33.44532.945 35.64535.235 37.935

7353.7454.1304.130

805800

7801.1051.2752.1853.2251.3203.4754.235

175

www.peecon.com 25

2..-0752..-0852..-0952..-1052..-1252..-1402..-1502..-1602..-1702..-1802..-200

231-901-153231-901-158231-901-159231-901-160231-901-066231-901-156

231-901-136-002231-901-132-002231-901-133-002231-901-134-002231-901-138-001231-901-128-002231-901-129-002231-901-130-002231-901-...-...

231-901-139-001231-901-164-002231-901-231-002231-901-002-...231-901-003-...231-901-004231-901-005231-901-006231-901-009231-901-010231-901-011231-901-024231-901-079231-901-175231-901-072231-901-041231-901-042231-901-193231-901-034231-901-197231-901-082-002231-901-093231-901-195231-901-081231-901-083-001231-901-015231-901-198

231-901-098-...231-901-103-...231-901-107-002231-901-233-002231-901-104-...231-901-105-...231-901-177-001231-901-203-002231-901-121-...231-901-119-001231-901-109-002231-901-178-001231-901-188-001231-901-120-001231-901-122-...231-901-110-...

231-901-149231-901-173-001231-901-173-004231-901-173-003231-901-173-005231-901-078231-901-162-001231-901-163-002231-901-161231-901-152-...

Standard equipment ◼ Galvanized tank with manhole Ø 600 mm ◼ Galvanized strengthened undercarriage prepared for Peecon linkage system with low hitch and twistable towing bracket

◼ Sprung action draw bar with 2 rubber blocks ◼ Sight tube Ø 150 mm in front wall of the tank ◼ Big sight glass at back side ◼ Pump Jurop PN 58 (6200 litres) (1000 RPM) ◼ Walterscheid PTO shaft ◼ Silencer for vacuum pump ◼ Self-cleaning moisture guard ◼ Hydraulic shut-off valve at the back 6” ◼ Side connection 6” with fastener at the left front ◼ Blind flange 8” at the left front and 6” at the right front, left behind and right behind ◼ 4 Metres hose 6” with couplings ◼ Lighting and reflectors ◼ Hydraulic support ◼ Underframe with 2 hydraulically braked axles, of which the rear axle tracking steered, hydraulically blocked. ◼ Tyres Peecon 550/60x22.5

Hydraulic change over of the vacuum pump #Turbo filler 8” driven by hydraulic motor (recommended for deep slurry cellar) #Wide angle PTO shaft WalterscheidExtra side connection 6” with fastener LF RF LB RBExtra side connection 8” with fastener LF RF LB RB5 Metres hose 6” instead of 4 metres4 Metres extension hose 6” with male and female coupling4 Metres hose 8” with couplingsSuction tube 8” at centre front including electro-hydraulic operation and funnelSuction tube 8” mounted at the right side including electro-hydraulic operationSuction tube 8” 290º turnable mounted at the back incl. electro-hydraulic operationManhole Ø 600 mm on top of tankSliding fill hatch 600 mm on top of tank hydraulically operated #Steps to manhole/sliding fill hatchDraw bar hydraulically sprung/adjustable # (standard with Euroline Deluxe)Axle distance 1800 mm, necessary with tyres bigger than 1400 mmHydraulically forced steered rear axleElectronic axle steering Mobil Elektronik via LSTop pressure cylinder with accumulator #Air braked axles (standard with TÜV version)Air braked axle in combination with hydraulic brake systemHydraulic springs instead of Boggie, movable system will be invalidated (std from ZT 15000 Euroline Deluxe)Hydraulically movable Boggie underframe (35-45 cm) # (std with ZT 7500-14000 Euroline Deluxe)Prepared for flow-meterBPW axles 150 mmGalvanized mud boards (standard with Euroline Deluxe)Mounting of towing hook on tractor, suitable for hydraulically forced control and top pressure cylinder

Optional tyresPeecon 550/60x22.5 (550 x 1230 mm) (10B) per 4Alliance/BKT 600/55x26.5 (600 x 1350 mm) (10B) per 4Michelin 600/55R26.5 (600 x 1350 mm) (10B) per 4Techking 24R20.5 (600 x 1375 mm) (10B) per 4Michelin 24R20.5 (600 x 1380 mm) (10B) per 4Alliance/BKT 650/55R26.5 (650 x 1360 mm) (10B) per 4Alliance/BKT 650/60R26.5 (660 x 1450 mm) (10B) per 4Alliance/BKT 650/65R30.5 (680 x 1625 mm) (10B) per 4Alliance/BKT 700/50x26.5 (700 x 1350 mm) (10B) per 4Vredestein 700/50R26.5 (700 x 1350 mm) (10B) per 4Michelin 710/50R26.5 (720 x 1400 mm) (10B) per 4Alliance/BKT 710/50R26.5 (710 x 1380 mm) (10B) per 4Alliance/BKT 710/50R30.5 (720 x 1495 mm) (10B) per 4Alliance/BKT 750/45R26.5 (750 x 1350 mm) (10G) per 4Alliance/BKT 800/45x26.5 (800 x 1350 mm) (10B) per 4Alliance/BKT 850/50x30.5 (850 x 1680 mm) (10B), including integrated wheels per 4

Optional equipment for the mounting of injection systemsMicro-air regulator for dosage of the slurry4-Point lever mechanism single-acting (see page 30)4-Point lever mechanism Base, Cat. II with series connection (see page 30)4-Point lever mechanism Profi, Cat. II with electro-hydraulic operation (see page 30)3 and/or 4-Point lever mechanism Deluxe, Cat. III with pushing cylinders and electro-hydraulic operation (page 30)Adjustment valve bloc for loadsensingSlurry chaff-cutter 6” maxi driven by hydraulic motor #Cutting box FT 4200 L driven by hydraulic motor #Lift bars with Walterscheid fast couplersExtra electro-hydraulic function applicable with options with # - per function

4253.755

470470930110470470

6.2809.385

13.350895

1.990475

1.5201.6051.9603.6204.4651.8902.0951.885

5151.8202.660

585945

standard4.6355.9456.1107.8354.6506.2157.9655.3606.9658.2056.9059.2356.5456.930

12.650

5301.8353.2658.0058.975

on demand3.7556.095

285840

ZT 7500 Euroline Deluxe TandemZT 8500 Euroline Deluxe TandemZT 9500 Euroline Deluxe TandemZT 10500 Euroline Deluxe TandemZT 12500 Euroline Deluxe TandemZT 14000 Euroline Deluxe TandemZT 15000 Euroline Deluxe TandemZT 16000 Euroline Deluxe TandemZT 17000 Euroline Deluxe TandemZT 18000 Euroline Deluxe TandemZT 20000 Euroline Deluxe Tandem

Optional export modelsPVG version Belgium, with hand brake, rear bumper and orange LED side marking, ready for examinationTÜV 25 km/h version Germany, air braked axle and TÜV towing bracket, including examinationTÜV 40 km/h version Germany, air braked axle and TÜV towing bracket, including examinationTÜV 40 km/h idem, hydr.springs (movable system is invalidated), axle distance 1800 mm, up from ZT 15000 Euroline BoggieALR air pressure regulator (for air brake system)Homologation version France, equipped with hand brake and fixed DIN towing bracket, ready for examination

Optional equipmentPump Jurop PN 84 (1000 RPM) capacity 9000 litres per minutePump Jurop PNE 102 (1000 RPM) capacity 10200 litres per minutePump Jurop PNE 122 (1000 RPM) capacity 12200 litres per minutePump Jurop PNR 142 (1000 RPM) capacity 14200 litres per minuteWater-cooled vacuum pump Jurop LC 420 (1000 RPM) capacity 12200 litres per minutePump B.P. Star 84/MA (1000 RPM) capacity 14800 litres per minuteWater-cooled pump B.P. WPT 600/MA (1000 RPM) capacity 10400 litres per minuteWater-cooled pump B.P. WPT 720/MA (1000 RPM) capacity 13000 litres per minutePump 540 RPM instead of 1000 RPM

Prices EURODescriptionArticle number

Prices EUROOptional equipmentArticle number

Euroline Deluxe Tandem Slurry Injector TanksPrice list

Base Deluxe

231-901-132-002 231-901-066

231-901-149 231-901-079

231-901-173-003 231-901-011

720 mm

550/60x22.5 328

650/55R26.5 38024R20.5 XS

650/60R26.5 380 700/50x26.5 328

710/50R26.5 390710/50R26.5 Cargo XBIB

850/50x30.5 328710/50R30.5 390

550 mm

1230 mm

600 mm

1350 mm

600/55R26.5 380

650 mm

1360 mm

600 mm

1380 mm

1450 mm

700 mm

1350 mm

660 mm

720 mm

1400 mm

710 mm

1380 mm

1670 mm

1495 mm

850 mm

Euroline (Deluxe) Tandem

24

Slurry Injector Tanks accessories

Euroline (Deluxe) Tandem

22

The 2-Axle Peecon Euroline (Deluxe) Tandem Slurry Injector Tanks are available in 2 versions: the Basis and the Deluxe. The Deluxe has, as a standard, been provided with a number of options. The tanks have a capacity of between 7,500 and 20,000 litres. All tanks have a self-supporting construction with integrated chassis. This ensures top durability while also being more lightweight than similar tanks with a separate chassis. The tank itself has been constructed of steel with a thickness of 6 mm. The tanks are always galvanised, both inside and out.

As a standard, the 2-Axle Euroline (Deluxe) Tandem Slurry Injector Tank has been provided with a 6” connection with quick coupling on the front left and an extra blind flange on the front left, front right, rear left, and rear right. An additional 8” blind flange has, as a standard, been installed on the front left. At the back, the tank has a 6” hydraulic valve and it has been prepared for 4-point lifting equipment. The Deluxe tanks have been provided with standard mud guards to bring along extra hoses or other equipment. Optionally, these can be mounted on the Basis

models as well. As a standard, the tanks are provided with 550/60x22.5 tyres. And, thanks to the possibility of wheel encasing, the tanks may be provided with (almost) any tyres available.

All tanks have, as a standard, a suspended tow bar. In case of the Basis models, the suspension has been realised by means of rubber blocks, while the Deluxe has, as a standard, been provided with a hydraulically suspended tow bar. In addition, the Deluxe - with a capacity of up to 14,000 litres - has been provided with a hydraulically adjustable axle to raise or lower the pressure on the towing point. From the Deluxe 15000, the axles are hydraulically suspended as a standard. An extensive list of options will ensure complete customisation according to your wishes. For example, you may choose to attach a turbo filler, different types of suction arms, various lifting equipment, etcetera. Furthermore, our Euroline tanks can be equipped with our EASYbus control system, with which all controls of the tank can be operated. For example, the flow control may optionally be operated via this system.

Slurry Injector Tanks