europe / middle east / afric a binders for construction ......tg (°c) mfft (°c) d2 - en 204 d3 -...
TRANSCRIPT
Binders for construction materials, sealants and flooring adhesives
You can expect more choicesfrom Arkema Coating Resins.And we deliver.
EUROPE / MIDDLE EAST / AFRICA
Our wide range of choices helps you optimize performance and value in your applications.
• Sustainability and QualityArkema Coating Resins is committed to meet the quality and sustainability needs of its customers, and to operate in a manner that helps protect the safety and health of customers, employees and members of the communities where we manufacture and market our products. For full information on quality, human health, safety and sustainability visit our web site: www.arkemacoatingresins.com.
1
Waterproofing Membranes, Mortar
Modifiers & Sealants ................... 2
Wood & Construction Adhesives ... 4
Floor Polishes ............................ 6
Carpet Care Products .................. 7
• Global SupportArkema Coating Resins operates globally to ensure you have access to product and technical support wherever you operate.
• Product DevelopmentIf your application has special needs that cannot be met through one of our existing products, contact your Arkema representative to discuss joint product development opportunities.
Delivering more choice.
Table of Contents
Waterproofing Membranes, Mortar Modifiers & Sealants
Wood & Construction Adhesives
Floor Polishes & Carpet Care Products
Our goal is to help you identify a product from our ENCOR® technology platform that enables you to formulate a competitive advantage into your product line. This product guide presents the ENCOR® product range of polymer emulsions for building industries and introduces new products developed in response to these dynamic and demanding markets. The ENCOR® brand encompasses acrylic, styrene acrylic and vinylic technologies.• Choose from 100% acrylic, styrene acrylic or vinylic chemistries.• Enhance performance and
sustainability through innovative products including very high solid content hydrophobic polymer emulsions.
ReferenceLiquid
Membranes 1K
Liquid Membranes
2K
Bitumen Modifiers
Mortar Modifiers
Primers & Sealers Sealants Chemical
Nature Solids (%) pHBrookfield Viscosity
(mPa.s @ 23°C)Tg (°C) MFFT (°C) Cement
Compatibility
ENCOR® 5100 • • • • • S/A 60.0 8.0 750 - 8 < +1 PGeneral purpose grade suitable for indoor and outdoor applications.
ENCOR® 5112 • • • • • S/A 57.0 7.5 1 250 - 8 < +1 P PNo NH3 development. Low VOC. Recommended for indoor applications.
ENCOR® 5120 • • • • ACR 60.0 7.0 2 000 - 3 8 < +1 PTo be used when low temperature flexibility is required.
ENCOR® 5126 • • • • S/A 59.0 7.0 2 000 - 21 < +1 P Excellent waterproofing properties. Low tack.
ENCOR® 5127 • • • S/A 59.0 7.0 2 000 - 28 < +1 PAllows to formulate waterproofing kits compliant with ETAG 005.
ENCOR® 5150 • • ACR 47.0 8.0 125 +20 +15 P P Pure acrylic for mortar modification.
ENCOR® 5425 • • • S/A 50.0 8.0 7 500 +23 +21
ENCOR® 5432 • • • S/A 50.0 8.0 3 000 +35 +33 P
ENCOR® 5525 • • S/A 50.0 6.5 200 +16 +15 P PExcellent water resistance. Outstanding adhesion on mineral substrates.
Waterproofing Membranes, Mortar Modifiers & Sealants
32
Main Applications Properties Specific Features and Benefits
ACR: Acrylic CopolymerS/A: Styrene-acrylic Copolymer
• Highly Recommended • Suitable
Wate
rpro
ofing
Mem
bra
nes,
Mor
tar
Mod
ifier
s &
Sea
lant
sW
ood &
Con
stru
ctio
n A
dhe
sive
sFl
oor
Polis
hes
& C
arp
et C
are
Pro
duc
tsW
aterp
roofing
Mem
bra
nes, Morta
r Mod
ifiers &
Seala
ntsW
ood &
Construction Adhesives
Floor Polishes & Ca
rpet Ca
re Products
Arkema Coating Resins’ offer forthe construction market is focusedon high solids products for use inflexible membranes and mortars.These products are mainly low glass transition temperature
[Tg<0°C] acrylic dispersions characterised by a high compatibility with cement. They provide films with elastomeric behaviour and excellent flexibility over a wide temperature range.
Reference Wood-working
Flexible Flooring
Hard Flooring
Wall Covering
Chemical Nature
Stabilizing System
Solids (%) pH
Brookfield Viscosity(mPa.s @
23°C)
Tg (°C) MFFT (°C) D2 - EN 204
D3 - EN 204
Creep Resistance EN 14256
ENCOR® 4031 • VAC PVOH 51.0 4.5 42 000 +21 +4 P Fast setting speed. Suitable for parquet adhesives.
ENCOR® 4075 • VAC PVOH 52.0 3.0 13 000 +17 +6 P PReady to use. Achieve D4 - EN 204 performances by polyisocyanate post-addition. (2 K system).
ENCOR® 4302 • • VAC PVOH 52.0 4.5 13 000 +40 +14 P P
ENCOR® 4331 • VAC PVOH 50.0 4.5 37 000 +40 +14 P Fast setting speed and long open time.
ENCOR® 4341 • VAC PVOH 60.0 4.5 37 000 +40 +14 P P Fast setting speed.
ENCOR® 4360 • VAC PVOH 60.0 4.5 2 500 +40 +14 P P Fast setting speed. Suitable for carpet backing.
ENCOR® 4365 • VAC PVOH 65.0 4.5 15 000 +40 +14 P P High solid content.
ENCOR® 4107 • ACR SURF 60.0 8.0 500 -41 < +1 Suitable for removable resin free tile adhesives.
ENCOR® 4516 • ACR SURF 60.0 7.5 1 500 -27 < +1 Suitable for formulations compliant with Emicode EC 1.
ENCOR® 5425 • S/A SURF 50.0 8.0 7 500 +23 +21
ENCOR® 5432 • S/A SURF 50.0 8.0 3 000 +35 +33 Suitable for water resistant paste adhesives compliant with EN 12004 D2 class.
54
Wood & Construction Adhesives
Main Applications Properties Specific Features and Benefits
ACR: Acrylic CopolymerS/A: Styrene-acrylic CopolymerVAC: Vinyl Acetate HomopolymerPVOH: Polyvinyl AlcoholSURF: Surfactant(s)
• Highly Recommended • Suitable
Wate
rpro
ofing
Mem
bra
nes,
Mor
tar
Mod
ifier
s &
Sea
lant
sW
ood &
Con
stru
ctio
n A
dhe
sive
sFl
oor
Polis
hes
& C
arp
et C
are
Pro
duc
tsW
aterp
roofing
Mem
bra
nes, Morta
r Mod
ifiers &
Seala
ntsW
ood &
Construction Adhesives
Floor Polishes & Ca
rpet Ca
re Products
With its broad portfolio of vinylicand acrylic based products,Arkema Coating Resins offersefficient solutions to satisfy theneed of the construction adhesiveindustry.
Floor Polishes
Reference
Polymer Emulsions
ENCOR® 7400, S/A • +50 38.0 8.5 < 100 P Outstanding chemical resistance.
ENCOR® 7405, S/A • +55 38.0 8.5 < 100 P Tough / Hard film.
ENCOR® 7408, S/A • +75 38.0 9.0 < 200 P
Excellent adhesion and response to buffing.
ENCOR® 7706, ACR • +53 38.0 8.5 < 100 P Outstanding durability.
ENCOR® 7752, ACR • +28 40.0 8.5 < 100 Excellent adhesion to many substrates.
High alkali resistance.
ENCOR® 7755, ACR • +55 38.0 5.0 < 100 Alkali soluble polymer. Good wetting
properties.
Polyethylene Wax Emulsions
ENCOR® 7603 • NA 35.0 9.0 < 200 NA Very flexible and slip resistant.
ENCOR® 7605 • NA 35.0 9.0 < 200 NA
ENCOR® 7607 • NA 35.0 9.0 < 100 NA Increases toughness and elasticity of films.
ENCOR® 7608 • • NA 35.0 9.5 < 200 NA Deep gloss.
Formulations
ENCOR® 7001 • < +1 30.0 8.5 < 100 P Excellent durability.
ENCOR® 7005 • < +1 30.0 8.5 < 100 P
ENCOR® 7008 • < +1 30.0 8.0 < 100 P
ENCOR® 7018 • < +1 30.0 8.5 < 200 P Excellent response to buffing.
ENCOR® 7019 • < +1 20.0 9.0 < 200 P Very good chemical resistance.
Reference
ENCOR® 7054 • • 21.0 A/NI 7.0 < 100 Low foaming properties.
ENCOR® 7055 • 22.0 A/NI 7.0 < 100 Contains a smell killer component.
ENCOR® 7068 • • 34.0 A 7.0 < 100 Excellent cleaning power and resistance against resoiling.
Main Applications Properties Specific Features and Benefits
A: Anionic Surfactant(s)NI: Non-ionic Surfactant(s)
• Highly Recommended • Suitable
Sham
poo
Spra
y Ex
tract
ion
Aer
osol
Pow
der C
lean
er
Solid
s (%
)
Stab
ilizi
ng S
yste
m
Broo
kfiel
d Vi
scos
ity(m
Pa.s
@ 2
3°C
)
pH
76
Main Applications Properties Specific Features and BenefitsN
ew o
r Stri
pped
Fl
oors
Glo
ssy
Are
as
Hos
pita
ls &
Hea
lth
Car
e C
entre
s
Hig
h Tr
affic
Are
as
MFF
T (°
C)
Solid
s (%
)
pH
Broo
kfiel
d Vi
scos
ity(m
Pa.s
@ 2
3°C
)
Self-
cros
slink
ing
Carpet Care Products
Wate
rpro
ofing
Mem
bra
nes,
Mor
tar
Mod
ifier
s &
Sea
lant
sW
ood &
Con
stru
ctio
n A
dhe
sive
sFl
oor
Polis
hes
& C
arp
et C
are
Pro
duc
tsW
aterp
roofing
Mem
bra
nes, Morta
r Mod
ifiers &
Seala
ntsW
ood &
Construction Adhesives
Floor Polishes & Ca
rpet Ca
re Products
Arkema Coating Resins offerspolymer emulsions, waxesemulsions and ready-to-use floorpolishes (after dilution) to helpfloor care professionals provide
both protection and appearancebenefits. Depending on your needs, an emulsion from our ENCOR® line will enable you to formulate standard and premium
quality floor polishes for use on a variety of flooring, including stone and ceramic, wood and parquet (except unsealed wooden floors), linoleum and vinyl.
With its Carpet Care range, Arkema Coating Resins will enable you to produce standard
and premium shampoos, aerosols or powder cleaners, suitable for all conventional cleaning
methods used in the domestic and industrial sectors.
ACR: Acrylic CopolymerS/A: Styrene-acrylic CopolymerNA: Non Applicable
• Highly Recommended • Suitable
98
Europe Headquarters
- Arkema - Colombes, France - Coatex - Genay, France
Technical and R&D Centers - Boretto, Italy - Coating Resins - Genay, France - Coatex - Sant Celoni, Spain - Coating Resins - Verneuil, France - Coating Resins - Sartomer
Production Facilities - Boretto, Italy - Coating Resins - Brummen, The Netherlands - Coating Resins - Drocourt, France - Coating Resins - Gissi, Italy - Coating Resins - Genay, France - Coatex - Moerdijk, The Netherlands - Coatex - Mollet, Spain - Coating Resins - Sant Celoni, Spain - Coating Resins - Stallingborough, United Kingdom - Coating
Resins - Villers St-Paul, France - Coating Resins -
Sartomer - Zwickau, Germany - Coating Resins
Americas Headquarters
- Arkema Coating Resins - Cary, NC - Arkema Inc. - King of Prussia, PA
Technical and R&D Centers - Araçariguama, Brazil - Coatex -
Coating Resins - Cary, NC - Coating Resins - Chester, SC - Coatex - King of Prussia, PA - North Kansas City, MO - Coating Resins
Production Facilities - Alsip, IL - Coating Resins - Araçariguama, Brazil - Coatex - Coating Resins - Chester, SC - Coatex - Grand Rapids, MI - Coating Resins - North Kansas City, MO - Coating Resins - Saint Charles, LA - Coating Resins - Saukville, WI - Coating Resins - Torrance, CA - Coating Resins
Asia Headquarters
- Arkema Greater China - Shanghai, China - Arkema K.K. - Tokyo, Japan Technical and R&D Centers
- Changshu, China - Coatex - Guangzhou, China - Sartomer - Coating Resins - Kyoto Technical Center, Japan - Navi Mumbai, India - Coating Resins - Pasir Gudang, Malaysia - Coating Resins
Production Facilities - Changshu, China - Coatex - Coating Resins -
Kynar - Kunsan, Korea - Coatex - Navi Mumbai, India - Coating Resins - Pasir Gudang, Malaysia - Coating Resins
ARK
EMA
- A
lim
ited
liabi
lity
com
pany
with
cap
ital o
f 630
.296
.920
eur
os -
Coo
k M
arco
mm
- 2/
14
420, rue d’Estienne d’Orves 92705 Colombes Cedex – France
Tél. : 33 (0)1 49 00 80 80 Fax : 33 (0)1 49 00 83 96
arkema.com
ENCOR® is a registered trademark of Arkema Inc.arkemacoatingresins.com
IMPORTANT: The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OR MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided within relates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before commercialization. Nothing contained herein constitutes a license to practice under any patent and it should not be construed as an inducement to infringe any patent and the users is advised to take appropriate steps to be sure that any proposed use of the product will not result in patent infringement.
The product data provided in this document are typical values, intended only as guides, and should not be construed as sales specifications.
The products described in the brochure are not Medical grades designated for Medical Device applications. Arkema has implemented an internal Medical Policy regarding the use of Arkema products in Medical Devices applications. Arkema has designated Medi-cal grades to be used for Medical Device applications. Products that have not been designated as Medical grades are not authorized by Arkema for use in Medical Device applications. In addition, except for limited cases as determined by the Medical Device Policy, Arkema strictly prohibits the use of any Arkema products in Medical Device applications that are implanted in the body or in contact with bodily fluids or tissues for greater than 30 days.
For any use of Arkema’s product in Medical Device applications, please contact Arkema’s sales network.
Customer Service Americas1-866-837-5532 (toll free)+1-919-469-6700Europe+33 (0)1 49 00 79 44China+86 21 6147 6888 (324)Asia Pacific (excluding China)+603-7839-5888
Global Headquarters + AmericasArkema Coating Resins410 Gregson Dr.Cary, NC, (USA) 27511+1 919-469-6700
European Regional HeadquartersArkema Coating Resins420, rue d’Estienne d’Orves 92700 Colombes - France +33 (0)1 49 00 79 44
Asia Pacific Regional HeadquartersArkema (China) Investment Co., Ltd. Shanghai Branch 6/F, Block 1, Life Hub @ Daning 1868 Gonghexin Road Shanghai 200072, P.R. ChinaTel: + 86 21 6147 6888 Fax: + 86 21 6147 6777 / 6746