eutectic high deposition electrodes single pages
DESCRIPTION
https://www.castolin.com/sites/default/files/ckfinder/files/Eutectic-High-Deposition-Electrodes-single-pages.pdfTRANSCRIPT
ABRATEC XHD
XHD 6710 • XHD 6715 • XHD 6395N
• Specially formulated to combat all types of abrasion and erosion
• Microstructure designed to achieve superior wear performance
• High carbide and boride content for the best wear resistance
• High deposition effi ciency reduces downtime and increases productivity
®
“THE BEST SOLUTION for your abrasion wear problems”
Typical Applications
Eutectic’s Line of Xuper High Deposition Electrodes
Foundry Sand Slinger Hardfaced Hammers
Mining Buckets AugersHarfaced Sinter Crusher Bars
Waste Cutting Knife
Bucket protected with XHD 6710 Fan edge protection Asphalt transportation screw
How to Order
Packaging: available in 11 lb., hermetically sealed, boxesContact: phone 800-558-8524 or email [email protected]
PRODUCT AVAILABLE DIAMETERS
XHD 6710 1/8” 5/32” 3/16” 1/4”
XHD 6715 1/8” 5/32” 3/16”
XHD 6395N 5/32”
Statement of Liability: Due to variations inherent in specifi c applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fi tness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affi liates shall have no liability in respect thereof.
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS
Eutectic CorporationN94 W14355 Garwin Mace DriveMenomonee Falls, WI 53051 USAP 800-558-8524 • F 262-255-5542www.eutectic.com
XHD 10-13 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.
CastoLab Services Workshop12300 Carmen AvenueMilwaukee, WI 53022 USAP 800-558-8524 • F 262-255-5542
Ductile, carbide-gripping austenitic matrix results inuniform wear resistance.
Stronger, with Eutectic
www.eutectic.com
Stronger, with Eutectic
www.eutectic.com
Conventionalhardfacing electrode with high dilution
Single pass of XHD 6710
Conventional Solution XHD 6710 XHD 6715 XHD 6395NVOLU
ME
LOSS
- m
m3
272421181512
9630
ASTM G-65 ABRASION TEST3330 40%
Stronger 50%Stronger
74%Stronger
Product Hardness Volume Loss
XHD 6710 63-65 HRC 20 mm3
XHD 6715 64-66 HRC 16 mm3
XHD 6395N 68-70 HRC 9 mm3
XHD 6710 XHD 6715 XHD 6395N
Lower dilution as compared to conventional electrodes
High deposition
Optimized microstructure
Weld metal properties
Standard
The Benefi ts of the XHD Technology
Hardness properties and wear resistance achieved on the fi rst pass.
Higher deposition rate (lb/h) means increased productivity.
Microstructure of the deposit is extremely important when choosing the best hardfacing electrode. Wear-resistance is also infl uenced by the degree of deposit chemistry, cooling rate and dilution.
Abrasion resistance
Up to 74% more wear resistant!
Extended life
Availability of Equipment
PERF
ORM
ANCE
Maintenance Costs
USE OF XHD SOLUTIONS
XHD 6710XHD 6715
XHD 6395N
Reduced maintenance means increased availability of critical equipment and longer component life.
High effi ciency30% more effi cient than standard electrodes achieves less waste and increased cost savings
Ductile, carbide-gripping austenitic matrix results inuniform wear resistance.
Stronger, with Eutectic
www.eutectic.com
Stronger, with Eutectic
www.eutectic.com
Conventionalhardfacing electrode with high dilution
Single pass of XHD 6710
Conventional Solution XHD 6710 XHD 6715 XHD 6395NVOLU
ME
LOSS
- m
m3
272421181512
9630
ASTM G-65 ABRASION TEST3330 40%
Stronger 50%Stronger
74%Stronger
Product Hardness Volume Loss
XHD 6710 63-65 HRC 20 mm3
XHD 6715 64-66 HRC 16 mm3
XHD 6395N 68-70 HRC 9 mm3
XHD 6710 XHD 6715 XHD 6395N
Lower dilution as compared to conventional electrodes
High deposition
Optimized microstructure
Weld metal properties
Standard
The Benefi ts of the XHD Technology
Hardness properties and wear resistance achieved on the fi rst pass.
Higher deposition rate (lb/h) means increased productivity.
Microstructure of the deposit is extremely important when choosing the best hardfacing electrode. Wear-resistance is also infl uenced by the degree of deposit chemistry, cooling rate and dilution.
Abrasion resistance
Up to 74% more wear resistant!
Extended life
Availability of Equipment
PERF
ORM
ANCE
Maintenance Costs
USE OF XHD SOLUTIONS
XHD 6710XHD 6715
XHD 6395N
Reduced maintenance means increased availability of critical equipment and longer component life.
High effi ciency30% more effi cient than standard electrodes achieves less waste and increased cost savings
ABRATEC XHD
XHD 6710 • XHD 6715 • XHD 6395N
• Specially formulated to combat all types of abrasion and erosion
• Microstructure designed to achieve superior wear performance
• High carbide and boride content for the best wear resistance
• High deposition effi ciency reduces downtime and increases productivity
®
“THE BEST SOLUTION for your abrasion wear problems”
Typical Applications
Eutectic’s Line of Xuper High Deposition Electrodes
Foundry Sand Slinger Hardfaced Hammers
Mining Buckets AugersHarfaced Sinter Crusher Bars
Waste Cutting Knife
Bucket protected with XHD 6710 Fan edge protection Asphalt transportation screw
How to Order
Packaging: available in 11 lb., hermetically sealed, boxesContact: phone 800-558-8524 or email [email protected]
PRODUCT AVAILABLE DIAMETERS
XHD 6710 1/8” 5/32” 3/16” 1/4”
XHD 6715 1/8” 5/32” 3/16”
XHD 6395N 5/32”
Statement of Liability: Due to variations inherent in specifi c applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fi tness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affi liates shall have no liability in respect thereof.
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS
Eutectic CorporationN94 W14355 Garwin Mace DriveMenomonee Falls, WI 53051 USAP 800-558-8524 • F 262-255-5542www.eutectic.com
XHD 10-13 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.
CastoLab Services Workshop12300 Carmen AvenueMilwaukee, WI 53022 USAP 800-558-8524 • F 262-255-5542