hydrate faster.

ride faster.

race faster.

2 0 1 5

h y d r a t i o n s y s t e m

i n v i s c i d D E S I G N

TMs p e e d f i l

h y d r a t i o n s y s t e m

i n v i s c i d D E S I G N

TMs p e e d f i l

288.2

279.3

290.8

286.7

280.6

270 275 280 285 290 295

Baseline

A

B

C

D

ERO Testing - Power (Watts/43km/h)

Speedfil Aero Bundle (A2 / Z4+) showed highest power savings of any previous BTA system tested at ERO !

The test cyclist with the Aero Bundle showed a 3%+ improvement in drag (CdA) & power which could translate to 5+ minutes saved over a 112 mile bike ride.

NOTE #1: ERO historical data shows best previous BTA setup equal to a baseline configuration. NOTE #2: ERO historical data shows two round bottles on frame has greater CdA than bare frame.

100%FAST

Speedfil designers and engineers spent the Spring of 2014 refining and testing several systems and configurations at the Los Angeles Velodrome with ERO Sports and the revolutionary Alpha-

mantis Track System. The results proved Speedfils are - FAST ! Some of the lowest drag and power numbers ever recorded with BTA systems were achieved with Speedfil systems.

Speedfil continues to design and refine so athletes can : hydrate, ride and race faster!

Baseline: Bare Frame / No BottlesA: Speedfil Aero Bundle (A2 & Z4+)B: Speedfil Frame Bottle HighC: Speedfil Frame Bottle LowD: Speedfil Z4 Cage rear

“The performance promise of a BTA system made by Cervelo has finally been realized by SPEEDFIL.” - Jim Manton, ERO Sports

hydrate faster.

Speedfil Hydration Systems are relentlessly tested and

refined for athletes who simply want to perform at their best.

These inventive and patented systems deliver hydration, aerodynamics, safety and ease of use.

Speedfil branded products now are available for front, frame and rear configurations for most bicycles and athletes.

Inviscid Design, Inc. has won numerous awards from magazines and industry trade groups for the unique cutting edge Speedfil products and superior functionality.

Speedfils continue to win races with athletes from all across the globe. These same athletes help us perfect the products and inspire us to create new and innovative ways to allow athletes to hydrate faster, ride faster and race faster!

speedfilThe Speedfil Hydration System is a patent pending, revolutionary cycling product designed to enhance athlete hydration and aerodynamics.

The wind tunnel developed system smooths airflow within the frame while the rider is in motion. The rider is able to maintain an aerodynamic position while drinking up to 40 ounces (1.2l liters) of fluid.

Hydration is immediate as a bite valve and poseable tubing keep fluid at the ready and hands free. The Speedfil allows the user to refill the bottle on-the fly minimizing the need for additional bottles.

A unique dual splash resistant opening that allows for rapid refills completes the system.

Speedfil Video

Speedfil Hydration System

The Standard Speedfil works on any size appropriate bicycle frame with downtube water bottle mounts. The bottle will hold up to 40 fluid ounces (1.2 liters). The Speedfil comes complete with all parts ready to assemble.

Speedfil + Seat Tube Adapter Kit

The seat tube adapter kit allows a Speedfil to attach to seat tube frame mounts (i.e. Cannondale Slice and Felt B2). Seat tubeadapter kit is sold separately.

Speedfil 40oz. (1.2l) Capacity

The Speedfil system can hold two water bottles worth of fluid, approximately 40ozs./1.2 l. The volume allows the athlete to refill fewer times than other systems and stay positioned aerodynamically longer than competitors.

speedfil A2 &AERO BUNDLETurn a standard bicycle water bottle into a Speedfil system!

The patented Speedfil A2 system work with most standard water bottles ranging in size from 15 to 32 ounces (444 ml to 946 ml).

The A2 is optimized for use on aerobars filling in the void between the forearms and decreasing drag. Use with the original Speedfil to carry different fluids.

The design allows for rapid refilling on the fly, hands free drinking and very easy to clean!

Speedfil A2 Video

Speedfil A2 System

The Speedfil A2 is intended for use in the aerobars for maximum aerodynamic a d v a n t a g e . Wind Tunnel and TRACK Testing with ERO have shown the A2 system to be one of, if not THE fastest BTA system available.and mount to a standard

Speedfil A2 Zerosplash

The patent pending Zerosplash minimizes any fluid escaping from the Speedfil A2. The unique valve port allows for ease of fluid refill but is virtually sealed when closed providing zero splash!and mount to a standard bicycle frame.

Speedfil A2 Adaptability

The Speedfil A2 works on a multitude of standard bicycle and sport water bottles. Small to large: the A2 systems can accommodate almost any athletes’ hydration needs.

SPEEDFIL AERO BUNDLE (includes: A2 System, Z4+ Cage with tube clip and non slip strap. Cage Garmin 510 not included).

A2

speedfil F2 &OFFROAD BUNDLETurn a standard bicycle water bottle into a Speedfil system!

The patented Speedfil F2 systems work with most standard water bottles ranging in size from 15 to 32 ounces (444 ml to 946 ml).

The F2 is designed for use on bicycle frames. Road and Mountain bike athletes no longer need to carry hydration backpacks!

The design allows for rapid refilling on the fly, hands free drinking and very easy to clean!

Speedfil F2 Video Wattie Ink Team

Speedfil F2 System

Speedfil F2 is for use on the bicycle frame. Primary difference is type of refill cap and angle of the adapter for refill and drink tube placement.and mount to a standard bicycle frame.

Speedfil Retractor

The patented Retractor uses military/law enforcement grade springs and a spectra nylon cable to provide a functional tether to the drink tube and bite valve. Hold to drink, then let go and it retracts quickly to its holder.

Small in profile BIG in advantage. Available: February 2015

Speedfil F2 Adaptability

The Speedfil F2 works on a multitude of standard bicycle and sport water bottles. Small to large: the F2 systems can accommodate almost any athletes’ hydration needs.

speedfil F2OFFROAD BUNDLE(includes: F2 System, Z4 Cage with tube clip, non slip and retractor ).

Available: February 2015

F2

NEW for

2015

NEW for

2015

speedfil R3 /speedfil R3 single

The new Speedfil R3 rear hydration unit has the best in class adjustability of any unit on the market today. The unit adjusts to virtually any position and any saddle an athlete needs.

The R3 has dual Integrated internal Co2 holders in the unit. Single and dual mount bottle options are included. A specific Cervelo Seat post mount is available and Cervelo P5 compatible as well.

The R3 SINGLE is similar to the standard R3 but is just the single mount arm and saddle clamp AND comes with a Z4 cage which is the most secure cage available.

Patent Pending Design and ISM Saddle Approved.

This is the ONE rear hydration system for training and racing.

Speedfil R3 Video

R3 CervéloMount available for Cervélo Aero TT/Tri

(2 position) seat post.

R3 SINGLENow availble with Z4 Cage!

NEW for

2015

NEW R3 CO2 CHUCK

The Speedfil R3 now comes with an updated Co2 Chuck which not only secures the CO2 cartridge but also secures the inflator head and eliminates unwanted cartridge puncture.

R3 with Dual Cage Setup

The Speedfil R3 comes complete with Dual and Single mount options and because of the pivot arm, virtually any saddle/rider combination can be accomadated.

R3 with Single Cage Setup

The Speedfil R3 can use the Dual option to carry a single bottle with spare CO2 cartridges (as shown) or use the lower profile single mount.

NEW for

2015

speedfil Z4 / Z4+

Hydration, Aerodynamics & Data!

The new patent pending Speedfil Z4 Cage is the first cage optimized for BTA (Between-The-Arms) aero hydration. The Z4 Cage works with standard water bottles, the Speedfil A2 and has several unique and distinct advantages.

The Z4 is lightweight, easily configurable and can be used on front, frame and rear saddle mounts.

Z4 includes: Cage, Garmin arm, cable ties.

Z4+ includes: Cage, Garmin arm, cable ties, non-slip strap, tube clip.

Speedfil Z4 Video

Direct Mount

The Speedfil Z4 Cage is designed with numerous ports for a direct BTA mount in the aerobar extensions with a minimum of 4 nylon zip/cable ties. No additional mount or hardware is required. The ports are strategically placed allowing for multiple positions and variable angles accommodating most aerobars.bicycle frame.

Garmin® Integration

The Speedfil Z4 integrates a detachable arm which can hold a Garmin® Quarter Turn Bike Mount* to the top of the cage when used in a BTA configuration! This not only saves precious space within the aerobars but also provides easy access.

Garmin® Adapter Tube Clip

The Speedfil A2 Garmin® adapter allows for a single Garmin® bike computer to mount on top of a Speedfil A2 where the data is easily viewable and easily accessible and the Tube clip keeps drink tube out of the wind!

*Garmin® Quarter Turn Bike Mount (Part# 010-11430-00) sold separately through Garmin resellers.

Z4 CageSpeedfil Z4 is an extremely versatile and

secure cage.

speedfil Accessories & Parts

There are numerous accessories available for all the Speedfil systems.

Speedsoks provide insulation and keep fluids cool. The Stem Cap Mount offers a unique way to mount water bottles onto a standard 1-1/8” stem.

Replacement parts are available for all Speedfil systems.

Speedfil SpeedSoks

The Speedsok allows Speedfils to be insulated allowing fluids to be kept cold or warm depending on athlete needs and weather conditions. The Silversoks’ unique silver coating allows for light and heat reflection keeping fluids cool longer and mount

Speedfil Stem Cap Mount

The Speedfil Stem Mount has variable adjustability both horizontally and vertically. The mount works with any stem that is mounted to a 1-1/8” steerer tube and uses a standard center bolt stem cap. and mount to a standard bicycle frame.

Speedfil Replacement Parts

All parts for Speedfils are available for purchase separately. Athletes can replace used or missing parts as needed.

A2 / F2 SpeedsokBite Valve

Drink Tube

Cap

Inviscid Design, Inc.

Inviscid Design, Inc. designs, manufactures and markets

equipment and accessories to the endurance sports enthusiast; principally, triathletes, cyclists and runners. The company sells its products worldwide primarily through its distributors and retailers.

Headquartered in San Diego, California, USA, Inviscid Design, Inc. creates innovative products to enable athletes to hydrate faster, ride faster, run faster and race faster.

2014 / 2015 Inviscid Design, Inc. Speedfil, Zerosplash, and the “id” logo are registered trademarks of Inviscid Design, Inc. Any and all other brands/logos shown herein are copyright and trademarks of their respective corporations.

All rights Reserved.

www.speedfil.com

h y d r a t i o n s y s t e m

i n v i s c i d D E S I G N

TMs p e e d f i l

TWITTER: speedfil

FACEBOOK: speedfil