evil boris

1. // EvilBoris' Hyperion Config file

2.

3. {

4. /// Device configuration contains the following fields:

5. /// * 'name' : The user friendly name of the device (only used

for display purposes)

6. /// * 'type' : The type of the device or leds (known types for

now are 'ws2801', 'ldp8806',

7. /// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test'

and 'none')

8. /// * 'output' : The output specification depends on selected

device. This can for example be the

9. /// device specifier, device serial number, or the

output file name

10. /// * 'rate' : The baudrate of the output to the device

11. /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr',

etc.).

12. "device" :

13. {

14. "name" : "MyPi",

15. "type" : "lightberry",

16. "output" : "/dev/spidev0.0",

17. "rate" : 1000000,

18. "colorOrder" : "rgb"

19. },

20.

21. /// Color manipulation configuration used to tune the output colors to

specific surroundings.

22. /// The configuration contains a list of color-transforms. Each

transform contains the

23. /// following fields:

24. /// * 'id' : The unique identifier of the color transformation (eg

'device_1') /// * 'leds' : The indices (or index ranges) of the leds to

which this color transform applies

25. /// (eg '0-5, 9, 11, 12-17'). The indices are zero based.

/// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with

the following

26. /// tuning parameters:

27. /// - 'saturationGain' The gain adjustement of the

saturation

28. /// - 'valueGain' The gain adjustement of the value

29. /// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue

color domain with the

30. /// following tuning parameters for each

channel:

31. /// - 'threshold' The minimum required input value for

the channel to be on

32. /// (else zero)

33. /// - 'gamma' The gamma-curve correction factor

34. /// - 'blacklevel' The lowest possible value (when the

channel is black)

35. /// - 'whitelevel' The highest possible value (when the

channel is white)

36. ///

37. /// Next to the list with color transforms there is also a smoothing

option.

38. /// * 'smoothing' : Smoothing of the colors in the time-domain with

the following tuning

39. /// parameters:

40. /// - 'type' The type of smoothing algorithm

('linear' or 'none')

41. /// - 'time_ms' The time constant for smoothing

algorithm in milliseconds

42. /// - 'updateFrequency' The update frequency of the leds in

Hz

43. "color" :

44. {

45. "transform" :

46. [

47. {

48. "id" : "default",

49. "leds" : "0-43",

50. "hsv" :

51. {

52. "saturationGain" : 1.2200,

53. "valueGain" : 0.8200

54. },

55. "red" :

56. {

57. "threshold" : 0.1900,

58. "gamma" : 2.2000,

59. "blacklevel" : 0.0000,

60. "whitelevel" : 1.0000

61. },

62. "green" :

63. {

64. "threshold" : 0.2200,

65. "gamma" : 2.2000,

66. "blacklevel" : 0.0000,


68. },

69. "blue" :

70. {

71. "threshold" : 0.2200,

72. "gamma" : 2.9000,

73. "blacklevel" : 0.0000,


75. }

76. },

77. {

78. "id" : "off",

79. "leds" : "44-47",

80. "hsv" :

81. {

82. "saturationGain" : 5.0000,

83. "valueGain" : 0.0000

84. },

85. "red" :

86. {

87. "threshold" : 0.0000,

88. "gamma" : 1.0000,

89. "blacklevel" : 0.0000,


91. },

92. "green" :

93. {

94. "threshold" : 0.0000,

95. "gamma" : 1.0000,

96. "blacklevel" : 0.0000,


98. },

99. "blue" :

100. {

101. "threshold" : 0.0000,

102. "gamma" : 1.0000,

103. "blacklevel" : 0.0000,

104. "whitelevel" : 1.0000

105. }

106. }

107. ],

108. "smoothing" :

109. {

110. "type" : "linear",

111. "time_ms" : 90,

112. "updateFrequency" : 30.0000

113. }

114. },

115.

116. /// The configuration for each individual led. This contains

the specification of the area

117. /// averaged of an input image for each led to determine its

color. Each item in the list

118. /// contains the following fields:

119. /// * index: The index of the led. This determines its

location in the string of leds; zero

120. /// being the first led.

121. /// * hscan: The fractional part of the image along the

horizontal used for the averaging

122. /// (minimum and maximum inclusive)

123. /// * vscan: The fractional part of the image along the

vertical used for the averaging

124. /// (minimum and maximum inclusive)

125. "leds" :

126. [

127. {

128. "index" : 0,

129. "hscan" : { "minimum" : 0.0000, "maximum" :

0.0600 },

130. "vscan" : { "minimum" : 0.8750, "maximum" :

1.0000 }

131. },

132. {

133. "index" : 1,


0.0600 },


0.8750 }

136. },

137. {

138. "index" : 2,


0.0600 },


0.7500 }

141. },

142. {

143. "index" : 3,


0.0600 },


0.6250 }

146. },

147. {

148. "index" : 4,


0.0600 },


0.5000 }

151. },

152. {

153. "index" : 5,


0.0600 },


0.3750 }

156. },

157. {

158. "index" : 6,


0.0600 },


0.2500 }

161. },

162. {

163. "index" : 7,


0.0600 },


0.1250 }

166. },

167. {

168. "index" : 8,


0.0714 },


0.1200 }

171. },

172. {

173. "index" : 9,


0.1429 },


0.1200 }

176. },

177. {

178. "index" : 10,


0.2143 },


0.1200 }

181. },

182. {

183. "index" : 11,


0.2857 },


0.1200 }

186. },

187. {

188. "index" : 12,


0.3571 },


0.1200 }

191. },

192. {

193. "index" : 13,


0.4286 },


0.1200 }

196. },

197. {

198. "index" : 14,


0.5000 },


0.1200 }

201. },

202. {

203. "index" : 15,


0.5714 },


0.1200 }

206. },

207. {

208. "index" : 16,


0.6429 },


0.1200 }

211. },

212. {

213. "index" : 17,


0.7143 },


0.1200 }

216. },

217. {

218. "index" : 18,


0.7857 },


0.1200 }

221. },

222. {

223. "index" : 19,


0.8571 },


0.1200 }

226. },

227. {

228. "index" : 20,


0.9286 },


0.1200 }

231. },

232. {

233. "index" : 21,


1.0000 },


0.1200 }

236. },

237. {

238. "index" : 22,


1.0000 },


0.1250 }

241. },

242. {

243. "index" : 23,


1.0000 },


0.2500 }

246. },

247. {

248. "index" : 24,


1.0000 },


0.3750 }

251. },

252. {

253. "index" : 25,


1.0000 },


0.5000 }

256. },

257. {

258. "index" : 26,


1.0000 },


0.6250 }

261. },

262. {

263. "index" : 27,


1.0000 },


0.7500 }

266. },

267. {

268. "index" : 28,


1.0000 },


0.8750 }

271. },

272. {

273. "index" : 29,


1.0000 },


1.0000 }

276. },

277. {

278. "index" : 30,


1.0000 },


1.0000 }

281. },

282. {

283. "index" : 31,


0.9286 },


1.0000 }

286. },

287. {

288. "index" : 32,


0.8571 },


1.0000 }

291. },

292. {

293. "index" : 33,


0.7857 },


1.0000 }

296. },

297. {

298. "index" : 34,


0.7143 },


1.0000 }

301. },

302. {

303. "index" : 35,


0.6429 },


1.0000 }

306. },

307. {

308. "index" : 36,


0.5714 },


1.0000 }

311. },

312. {

313. "index" : 37,


0.5000 },


1.0000 }

316. },

317. {

318. "index" : 38,


0.4286 },


1.0000 }

321. },

322. {

323. "index" : 39,


0.3571 },


1.0000 }

326. },

327. {

328. "index" : 40,


0.2857 },


1.0000 }

331. },

332. {

333. "index" : 41,


0.2143 },


1.0000 }

336. },

337. {

338. "index" : 42,


0.1429 },


1.0000 }

341. },

342. {

343. "index" : 43,


0.0714 },


1.0000 }

346. },

347. {

348. "index" : 44,


0.7647 },


1.0000 }

351. },

352. {

353. "index" : 45,


0.7059 },


1.0000 }

356. },

357. {

358. "index" : 46,


0.6471 },


1.0000 }

361. },

362. {

363. "index" : 47,


0.5882 },


1.0000 }

366. }

367. ],

368.

369. /// The black border configuration, contains the following

items:

370. /// * enable : true if the detector should be activated

371. /// * threshold : Value below which a pixel is regarded as

black (value between 0.0 and 1.0)

372. "blackborderdetector" :

373. {

374. "enable" : true,

375. "threshold" : 0.20

376. },

377.

378. /// The configuration of the effect engine, contains the

following items:

379. /// * paths : An array with absolute location(s) of

directories with effects

380. /// * bootsequence : The effect selected as 'boot sequence'

381. "effects" :

382. {

383. "paths" :

384. [

385. "/opt/hyperion/effects"

386. ]

387. },

388.

389. "bootsequence" :

390. {

391. "effect" : "Rainbow swirl fast",

392. "duration_ms" : 3000

393. },

394.

395. /// The configuration for the frame-grabber, contains the

following items:

396. /// * width : The width of the grabbed frames [pixels]

397. /// * height : The height of the grabbed frames

[pixels]

398. /// * frequency_Hz : The frequency of the frame grab [Hz]

399. // "framegrabber" :

400. // {

401. // "width" : 64,

402. // "height" : 64,

403. // "frequency_Hz" : 10.0

404. // },

405.

406. /// The configuration of the XBMC connection used to enable and

disable the frame-grabber. Contains the following fields:

407. /// * xbmcAddress : The IP address of the XBMC-host

408. /// * xbmcTcpPort : The TCP-port of the XBMC-server

409. /// * grabVideo : Flag indicating that the frame-

grabber is on(true) during video playback

410. /// * grabPictures : Flag indicating that the frame-

grabber is on(true) during picture show

411. /// * grabAudio : Flag indicating that the frame-

grabber is on(true) during audio playback

412. /// * grabMenu : Flag indicating that the frame-

grabber is on(true) in the XBMC menu

413. /// * grabScreensaver : Flag indicating that the frame-

grabber is on(true) when XBMC is on screensaver

414. /// * enable3DDetection : Flag indicating that the frame-

grabber should switch to a 3D compatible modus if a 3D video is playing

415. "xbmcVideoChecker" :

416. {

417. "xbmcAddress" : "127.0.0.1",

418. "xbmcTcpPort" : 9090,

419. "grabVideo" : true,

420. "grabPictures" : true,

421. "grabAudio" : true,

422. "grabMenu" : false,

423. "grabScreensaver" : true,

424. "enable3DDetection" : true

425. },

426.

427. /// The configuration of the Json server which enables the json

remote interface

428. /// * port : Port at which the json server is started

429. "jsonServer" :

430. {

431. "port" : 19444

432. },

433.

434. /// The configuration of the Proto server which enables the

protobuffer remote interface

435. /// * port : Port at which the protobuffer server is started

436. "protoServer" :

437. {

438. "port" : 19445

439. },

440.

441. /// The configuration of the boblight server which enables the

boblight remote interface

442. /// * port : Port at which the boblight server is started

443. // "boblightServer" :

444. // {

445. // "port" : 19333

446. // },

447.

448.

449. /// Configuration for the embedded V4L2 grabber

450. /// * device : V4L2 Device to use

[default="/dev/video0"]

451. /// * input : V4L2 input to use [default=0]

452. /// * standard : Video standard (no-change/PAL/NTSC)

[default="no-change"]

453. /// * width : V4L2 width to set [default=-1]

454. /// * height : V4L2 height to set [default=-1]

455. /// * frameDecimation : Frame decimation factor

[default=2]

456. /// * sizeDecimation : Size decimation factor

[default=8]

457. /// * priority : Hyperion priority channel

[default=800]

458. /// * mode : 3D mode to use 2D/3DSBS/3DTAB

(note: no autodetection) [default="2D"]

459. /// * cropLeft : Cropping from the left

[default=0]

460. /// * cropRight : Cropping from the right

[default=0]

461. /// * cropTop : Cropping from the top [default=0]

462. /// * cropBottom : Cropping from the bottom

[default=0]

463. /// * redSignalThreshold : Signal threshold for the red

channel between 0.0 and 1.0 [default=0.0]

464. /// * greenSignalThreshold : Signal threshold for the green

channel between 0.0 and 1.0 [default=0.0]......

465. /// * blueSignalThreshold : Signal threshold for the blue

channel between 0.0 and 1.0 [default=0.0]

466. "grabber-v4l2" :

467. {

468. "device" : "/dev/video0",

469. "input" : 0,

470. "standard" : "no-change",

471. "width" : 1,

472. "height" : 1,

473. "frameDecimation" : 2,

474. "sizeDecimation" : 4,

475. "priority" : 800,

476. "mode" : "2D",

477. "cropLeft" : 10,

478. "cropRight" : 8,

479. "cropTop" : 12,

480. "cropBottom" : 19,

481. "redSignalThreshold" : 0.2,

482. "greenSignalThreshold" : 0.2,

483. "blueSignalThreshold" : 0.2

484. },

485.

486.

487. "endOfJson" : "endOfJson"

488. }

/ EvilBoris' Hyperion Config file

{

/// Device configuration contains the following fields:

/// * 'name' : The user friendly name of the device (only used for display purposes)

/// * 'type' : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',

/// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')

/// * 'output' : The output specification depends on selected device. This can for example be the

/// device specifier, device serial number, or the output file name

/// * 'rate' : The baudrate of the output to the device

/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).

"device" :

{

"name" : "MyPi",

"type" : "lightberry",

"output" : "/dev/spidev0.0",

"rate" : 1000000,

"colorOrder" : "rgb"

},

/// Color manipulation configuration used to tune the output colors to specific surroundings.

/// The configuration contains a list of color-transforms. Each transform contains the

/// following fields:

/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies

/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following

/// tuning parameters:

/// - 'saturationGain' The gain adjustement of the saturation

/// - 'valueGain' The gain adjustement of the value

/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the

/// following tuning parameters for each channel:

/// - 'threshold' The minimum required input value for the channel to be on

/// (else zero)

/// - 'gamma' The gamma-curve correction factor

/// - 'blacklevel' The lowest possible value (when the channel is black)

/// - 'whitelevel' The highest possible value (when the channel is white)

///

/// Next to the list with color transforms there is also a smoothing option.

/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning

/// parameters:

/// - 'type' The type of smoothing algorithm ('linear' or 'none')

/// - 'time_ms' The time constant for smoothing algorithm in milliseconds

/// - 'updateFrequency' The update frequency of the leds in Hz

"color" :

{

"transform" :

[

{

"id" : "default",

"leds" : "0-43",

"hsv" :

{

"saturationGain" : 1.2200,

"valueGain" : 0.8200

},

"red" :

{

"threshold" : 0.1900,

"gamma" : 2.2000,

"blacklevel" : 0.0000,

"whitelevel" : 1.0000

},

"green" :

{


"gamma" : 2.2000,



},

"blue" :

{


"gamma" : 2.9000,



}

},

{

"id" : "off",

"leds" : "44-47",

"hsv" :

{

"saturationGain" : 5.0000,

"valueGain" : 0.0000

},

"red" :

{


"gamma" : 1.0000,



},

"green" :

{


"gamma" : 1.0000,



},

"blue" :

{


"gamma" : 1.0000,



}

}

],

"smoothing" :

{

"type" : "linear",

"time_ms" : 90,

"updateFrequency" : 30.0000

}

},

/// The configuration for each individual led. This contains the specification of the area

/// averaged of an input image for each led to determine its color. Each item in the list

/// contains the following fields:

/// * index: The index of the led. This determines its location in the string of leds; zero

/// being the first led.

/// * hscan: The fractional part of the image along the horizontal used for the averaging

/// (minimum and maximum inclusive)

/// * vscan: The fractional part of the image along the vertical used for the averaging

/// (minimum and maximum inclusive)

"leds" :

[

{

"index" : 0,

"hscan" : { "minimum" : 0.0000, "maximum" : 0.0600 },

"vscan" : { "minimum" : 0.8750, "maximum" : 1.0000 }

},

{

"index" : 1,



},

{

"index" : 2,



},

{

"index" : 3,



},

{

"index" : 4,



},

{

"index" : 5,



},

{

"index" : 6,



},

{

"index" : 7,



},

{

"index" : 8,



},

{

"index" : 9,



},

{

"index" : 10,



},

{

"index" : 11,



},

{

"index" : 12,



},

{

"index" : 13,



},

{

"index" : 14,



},

{

"index" : 15,



},

{

"index" : 16,



},

{

"index" : 17,



},

{

"index" : 18,



},

{

"index" : 19,



},

{

"index" : 20,



},

{

"index" : 21,



},

{

"index" : 22,



},

{

"index" : 23,



},

{

"index" : 24,



},

{

"index" : 25,



},

{

"index" : 26,



},

{

"index" : 27,



},

{

"index" : 28,



},

{

"index" : 29,



},

{

"index" : 30,



},

{

"index" : 31,



},

{

"index" : 32,



},

{

"index" : 33,



},

{

"index" : 34,



},

{

"index" : 35,



},

{

"index" : 36,



},

{

"index" : 37,



},

{

"index" : 38,



},

{

"index" : 39,



},

{

"index" : 40,



},

{

"index" : 41,



},

{

"index" : 42,



},

{

"index" : 43,



},

{

"index" : 44,



},

{

"index" : 45,



},

{

"index" : 46,



},

{

"index" : 47,



}

],

/// The black border configuration, contains the following items:

/// * enable : true if the detector should be activated

/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)

"blackborderdetector" :

{

"enable" : true,

"threshold" : 0.20

},

/// The configuration of the effect engine, contains the following items:

/// * paths : An array with absolute location(s) of directories with effects

/// * bootsequence : The effect selected as 'boot sequence'

"effects" :

{

"paths" :

[

"/opt/hyperion/effects"

]

},

"bootsequence" :

{

"effect" : "Rainbow swirl fast",

"duration_ms" : 3000

},

/// The configuration for the frame-grabber, contains the following items:

/// * width : The width of the grabbed frames [pixels]

/// * height : The height of the grabbed frames [pixels]

/// * frequency_Hz : The frequency of the frame grab [Hz]

// "framegrabber" :

// {

// "width" : 64,

// "height" : 64,

// "frequency_Hz" : 10.0

// },

/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:

/// * xbmcAddress : The IP address of the XBMC-host

/// * xbmcTcpPort : The TCP-port of the XBMC-server

/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback

/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show

/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback

/// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu

/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver

/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing

"xbmcVideoChecker" :

{

"xbmcAddress" : "127.0.0.1",

"xbmcTcpPort" : 9090,

"grabVideo" : true,

"grabPictures" : true,

"grabAudio" : true,

"grabMenu" : false,

"grabScreensaver" : true,

"enable3DDetection" : true

},

/// The configuration of the Json server which enables the json remote interface

/// * port : Port at which the json server is started

"jsonServer" :

{

"port" : 19444

},

/// The configuration of the Proto server which enables the protobuffer remote interface

/// * port : Port at which the protobuffer server is started

"protoServer" :

{

"port" : 19445

},

/// The configuration of the boblight server which enables the boblight remote interface

/// * port : Port at which the boblight server is started

// "boblightServer" :

// {

// "port" : 19333

// },

/// Configuration for the embedded V4L2 grabber

/// * device : V4L2 Device to use [default="/dev/video0"]

/// * input : V4L2 input to use [default=0]

/// * standard : Video standard (no-change/PAL/NTSC) [default="no-change"]

/// * width : V4L2 width to set [default=-1]

/// * height : V4L2 height to set [default=-1]

/// * frameDecimation : Frame decimation factor [default=2]

/// * sizeDecimation : Size decimation factor [default=8]

/// * priority : Hyperion priority channel [default=800]

/// * mode : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"]

/// * cropLeft : Cropping from the left [default=0]

/// * cropRight : Cropping from the right [default=0]

/// * cropTop : Cropping from the top [default=0]

/// * cropBottom : Cropping from the bottom [default=0]

/// * redSignalThreshold : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0]

/// * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0]......

/// * blueSignalThreshold : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0]

"grabber-v4l2" :

{

"device" : "/dev/video0",

"input" : 0,

"standard" : "no-change",

"width" : 1,

"height" : 1,

"frameDecimation" : 2,

"sizeDecimation" : 4,

"priority" : 800,

"mode" : "2D",

"cropLeft" : 10,

"cropRight" : 8,

"cropTop" : 12,

"cropBottom" : 19,

"redSignalThreshold" : 0.2,

"greenSignalThreshold" : 0.2,

"blueSignalThreshold" : 0.2

},

"endOfJson" : "endOfJson"

}

evil boris

Documents