exam 350-029 preparation questions

7
Exam 350-029 study material Made available by Aonetesting.com Free 350-029 Exam Preparation Questions Exam 350-029 : CCIE Service Provider Written For Latest 350-029 Exam Questions and study guides- visit- http://www.aonetesting.com/350-029.html

Upload: mitchell-johnson

Post on 23-Mar-2016

212 views

Category:

Documents


0 download

DESCRIPTION

Aonetesting the leading source in certification preparation services, all certification guaranteed study material, question and answers, practice exams and many more at one place. This is a brand which fulfills all the requirements of certification preparation of exams. By Aonetesting 350-029 training kits get 100% results in any certification exams.

TRANSCRIPT

Page 1: Exam 350-029 Preparation Questions

Exam 350-029 study material

Made available by Aonetesting.com

Free 350-029 Exam Preparation Questions

Exam 350-029: CCIE Service Provider Written

For Latest 350-029 Exam Questions and study guides- visit- http://www.aonetesting.com/350-029.html

Page 2: Exam 350-029 Preparation Questions

Question:1 Select the 3 best answers describing operation and configuration of Frame-Relay Inverse ARP. A. Dynamic address mapping uses Frame Relay Inverse ARP to request the next-hop protocol address for a specific

connection on its known DLCI. B. Responses to Inverse ARP requests are entered in an address-to-DLCI mapping table on the router or access server

which is used to supply the next-hop protoco address or the DLCI for outgoing traffic C. Inverse ARP is enabled by default for all protocols enabled on the physical interface. D. Inverse ARP is configured using the following command under the Interface configuration ‘frame-relay map dlci

(dlci number) protocol protocol-address’. E. Inverse ARP in Frame-Relay is synonymous of ARP in Ethernet.

Answer: A, B, C Question:2 Select the three valid LMI extension A. Multicasting B. Global addressing C. Forward-explicit congestion notification (FECN) D. Virtual circuit status messages. E. Backward-explicit congestion notification (BECN)

Answer: A, B, D Question:3 Which two statements regarding the IS-IS DIS election process are true? (Choose Two.) A. A priority of 0 will prevent a router from becoming a DIS. B. If the DIS becomes unavailable the backup DIS is promoted to DIS. C. Adding a router with a higher priority than the current DIS will result in the new router becoming DIS. D. Separate L1 and L2 election processes are held on a broadcast network. E. L1 routers on a broadcast network only establish adjacencies with the DIS. F. If there is a tie based on priority, the router whose attached interface has the lowest MAC address becomes the DIS.

Answer: C, D Question:4 With VPLS, which protocol is used for label exchange and PW signaling A. MP-BGP B. LDP C. Directed LDP D. MTP E. BGP F. IGP

Answer: C Question:5 RFC 3270 describes Differentiated Services (Diff-Serv) over Multi-Protocol Label Switching (MPLS) networks. Which model alters Differentiated Services (Diff-Serv) code points set in different Differentiated Services (Diff-Serv) domain? A. Uniform model B. Pipe Model C. Short Pipe D. None of the above will alter Differentiated Services (Diff-Serv) code points set in different Differentiated Services

(Diff-Serv) domain Answer: A Question:6 What is jitter? A. The total end-to-end delay B. The variations of delay. C. The delay caused by placing the bits on the wire. D. The time it takes for the bits to transit the physical media.

Answer: B Question:7

For Latest 350-029 Exam Questions and study guides- visit- http://www.aonetesting.com/350-029.html

Page 3: Exam 350-029 Preparation Questions

R3 and R4 are Route-Reflectors and there is an l-BGP session between them, there is NO I-BGP session between R1 and R2. For an External Route from CE-2 in R2 to reach R1 which two statements are true?

A. R1, R3 and R4 establish full mesh I-BGP sessions, R2, R3 and R4 establish full mesh l-BGP sessions. B. R1 acts as a Route-Reflector client to R3, R2 acts as a Route-Reflector client to R4 C. R1 acts as a Route-Reflector client to R4, R4 acts as a Route-Reflector client to R4, R2 acts as a Route-Reflector

client to R3. D. CE-2 establishes multi-hop E-BGP sessions with R3 and R4.

Answer: B, C Question:8 Which lOS features are used to avoid Routing loops when dynamic Routing protocols are used between PE and CE in MPLS-VPN networks? A. Site Of Origin SOO. B. SHAM links with OSPF C. BGP cost community D. BGP feature allow-as in E. RPF Reverse Path forwarding. F. Access-list Control in Distance Vector protocol like RIP and EIORP

Answer: A, F Question:9 What is used to provide read access to QoS configuration and statistics information on Cisco platforms that support Modular QoS CLI (MQC)? A. Cisco NBAP Discovery B. Cisco Auto QoS C. Cisco Class-Based QoS MIS. D. Cisco SDM QoS Wizard E. CDP

Answer: C Question:10 Which two statements are correct? A. A VC type 5 tunnels an Ethernet port over MPLS. B. A VC type 4 transports a VLAN over MPLS. C. A VC type 5 transports a VLAN over MPLS. D. A VC type 4 tunnels an Ethernet port over MPLS.

Answer: A, B Question:11 Which descriptions of Netflow is correct?

For Latest 350-029 Exam Questions and study guides- visit- http://www.aonetesting.com/350-029.html

Page 4: Exam 350-029 Preparation Questions

A. By default, Netflow records bidirectional IP traffic flow. B. Netflow answers questions regarding IP traffic: who what where, when, and how C. Netflow accounts for both transit traffic and traffic destined for the router. D. Netflow returns the sub interface information in the flow records.

Answer: B, C, D Question:12 In the context of GMPLS, LMP stands for; A. Loop Management Protocol B. Label Management Protocol C. Load Management Protocol D. Link Management Protocol E. None of above Answer: D Question:13 The lPv6 address FE80::656: 78FF:FE9A: BCDE is what type of address? A. Multicast B. Link-local C. Site-local D. None of the above Answer: B Question:14 What statement is true? A. Link Control Protocol(LCP) is used for basic PPP link setup and operation B. Link Control Protocol(LCP) is used for denying PPP connections to unauthorized devices. C. Link Control Protocol(LCP) for PPP is synonymous to ARP for Ethernet. D. None of the above.

Answer: A Question:15 Typical ADSL broadband Internet access requires a username and password to be entered on end-user PC connected to the ADSL modem in order for the end user to gain access to the Internet. if a Cisco ADSL router is used instead of an ADSL modem, what functionality is required on the Cisco ADSL router so the end-user connected to the Cisco ADSL router can access the Internet without entering a username and password? A. PPPoA B. Route Bridge Encapsulation(RBE) C. PPPoE client D. Integrated Routing and Bridging(IRB) E. AAA

Answer: C Question:16 What is the importance of using Virtual Output Queues on ingress Line Cards in a high-end router? A. Prevents head-of-line blocking B. Uses less memory C. Increases forwarding performance D. Simplifies configuration Answer: A Question:17 Packed Cell Relay encapsulation with AToM includes which or the following? A. Tunnel label B. VC-label C. 5-byte ATM header D. Payload E. 4 byte ATM header F. Support for 30 packed cells.

Answer: A, B, D, E Question:18 Which BGP Community option is used to prevent the advertisement of the BGP prefix to any other BGP peer? A. additive

For Latest 350-029 Exam Questions and study guides- visit- http://www.aonetesting.com/350-029.html

Page 5: Exam 350-029 Preparation Questions

B. none C. no-export D. no-advertise E. local-as

Answer: D Question:19 Which of the following descriptions about IP spoofing is correct? A. IP source address is forged B. IP destination address is forged C. IP TCP source port is forged D. IP TCP destination port is forged E. None of above

Answer: A Question:20 Which two statements best describe Ether channel? A. Ether Channel technology helps aggregate traffic grouping multiple, full-duplex point-to-point links together B. Ether Channel technology is based on the 802.1 IEEE stand C. Ether Channel can aggregate up to 800 Mbps,8 Gbps, or Gbps of aggregate bandwidth for a Fast Ether Channel,

Gigabit Ether Channel, or 10 Gigabit Ether Channel connection respectively. D. Ether Channel is defined for Rapid Spanning Tree for faster convergence.

Answer: A, C

For Latest 350-029 Exam Questions and study guides- visit- http://www.aonetesting.com/350-029.html

Page 6: Exam 350-029 Preparation Questions

For complete Exam 350-029 Training kits and Self-Paced Study Material

Visit:http://www.aonetesting.com/350-029.html

http://www.aonetesting.com

For Latest 350-029 Exam Questions and study guides- visit- http://www.aonetesting.com/350-029.html