exam 640-816 preparation questions

Exam 640-816 study material

Made available by Aonetesting.com

Free 640-816 Exam Preparation Questions

Exam 640-816: Interconnecting Cisco Networking Devices Part 2

For Latest 640-816 Exam Questions and study guides- visit- http://www.aonetesting.com/640-816.html

http://www.aonetesting.com/640-816.html



Question:1 All hosts in the same subnet with 172.16.5.118/26 must be denied Telnet access to hosts outside the LAN. To complete the bracketed command. [access-list list-number deny tcp 172.16.5.address 0.0.0.mask any eq port Assigns each appropriate option to its proper placeholder.

123

4.63 5.64 6.80 7.128 8.255

I.list-number II.address III.mask IV.port

A. I-6;II-4;III-2;IV-3 B. I-7;II-5;III-4;IV-3 C. I-6;II-5;III-4;IV-3 D. I-7;II-4;III-5;IV-3

Answer: B

Question:2 For the following protocols, which one offers a method of sharing VLAN configuration information between switches?

A. VTP B. VLSM C. STP D. ISL

Answer: A

Question:3 Company Widgets is redesigning the network that connects its three locations, The administrator gave the networking team 192.168.186.0 to use for addressing the entire network. After subnetting the address, the team is ready to assign the addresses. The administrator plans to configure ip subnet-zero and use RIP v2 as the routing protocol. As a member of the networking team, you must address the network and at the same time conserve unused addresses for future growth. With those goals in mind, assign the correct host addresses for the router interface. One of the routers is partially configured. Not all of the host addresses are necessary.


I. 192.168.186.173/26 II. 192.168.186.129/30 III. 192.168.186.128/30

IV. 192.168.186.152/28 V. 192.168.186.143/29

VI. 192.168.186.3/25 A. 1-VI;2-II;3-I;4-IV B. 1-V;2-II;3-II;4-IV C. 1-VI;2-I;3-II;4-V D. 1-VI;2-I;3-III;4-IV

Answer: A

Question:4 On the basis of the exhibit presented. What does the 128 indicate in the router output O 192.168.12.240/30 [110/128] via 192.168.12.233,00:35:36, Serial 0?

A. OSPF cost B. OSPF administrative distance


C. OSPF priority D. OSPF hop count

Answer: A

Question:5 In order to establish a secure terminal connection to a remote network device, which protocol will you use?

A. WEP B. SSH C. SNMPv1 D. SNMPv2

Answer: B

Question:6 You are a network administrator for Company . You have configured both of the following switches. When testing the network, you find that users on COPMANY -SWA can not connect with users in the same VLAN on COPMANY -SWB. How to solve this problem?

A. Ensure that the ports connecting the two switches are configured to trunk. B. Ensure that the two switches are connected with the same interface number. C. Ensure that COPMANY -SWA and COPMANY -SWB are connected with a straight-through cable. D. Ensure that the IP address of COPMANY -SWA is on the same network as the IP address of COPMANY -SWB.

Answer: A

Question:7 An extended access list needs to be applied to a Company router. What three pieces of information can be used in an extended access list to filter traffic? (Choose three)

A. protocol B. source switch port number C. TCP or UDP port numbers D. source IP address and destination IP address


Answer: A, C, D

Question:8 Which one of the following statements is the media access method that Gigabit Ethernet uses?

A. CSMA/CD B. CSMA/CA C. token passing D. point-to-point

Answer: A

Question:9 You are an administrator for Company . You cannot add VLAN 50 to a switch. When troubleshooting the problem, you view the output of the show vtp status command, which is displayed in the graphic. To add VLAN 50 to the database, what commands should be used on this switch? (Choose two.)

A. COPMANY -Switch(vlan)# vlan 50 B. COPMANY -Switch(vlan)# vtp server C. COPMANY -Switch(config)# vlan 50 name Tech D. COPMANY -Switch(config-if)# switchport access vlan 50

Answer: A, B

Question:10 The exhibit below displays the topology and partial router configurations. The network is completely operational and all routing tables are converged. Which route will appear in the output of the show ip route command issued on the COPMANY -Branch router?


A. S* 0.0.0.0/0 [1/0] via 192.168.10.82 B. C 192.168.12.0/24 is directly connected, FastEthernet0/0 C. R 172.16.11.4/30 [120/1] via 192.168.10.82, 00:00:22, Serial0/0 D. R 192.168.10.80/30 [120/0] via 192.168.10.81, 00:00:22, Serial0/0

Answer: A

Question:11 Examine the following router commands, which one could be used for verifying the type of cable connected to interface serial 0/0?

A. show ip interface serial 0/0 B. show controllers serial 0/0 C. show running-config D. show interfaces serial 0/0

Answer: B

Question:12 As it is shown in the exhibit. A new VLAN on Switch Company 1 has been created and host COPMANY C and host COPMANY D have been added. And switch interfaces FastEthernet0/13 has been properly configured through FastEthernet0/24 to be members of the new VLAN. After the configuration completed, however, host COPMANY A could communicate with host COPMANY B, but it could not communicate with host COPMANY C or host COPMANY D. To resolve this problem, which commands should be used?


A. Company 1# vlan database Company 1(vlan)# vtp v2-mode Company 1(vlan)# vtp domain cisco Company 1(vlan)# vtp server B. Company 2(config)# router rip Company 2(config-router)# network 192.168.1.0 Company 2(config-router)# network 192.168.2.0 Company 2(config-router)# network 192.168.3.0 C. Company 1(config)# interface fastethernet 0/1 Company 1(config-if)# switchport mode trunk Company 1(config-if)# switchport trunk encapsulation isl D. Company 2(config)# interface fastethernet 0/1.3 Company 2(config-if)# encapsulation dot1q 3 Company 2(config-if)# ip address 192.168.3.1 255.255.255.0

Answer: D

Question:13 Open Shortest Path First (OSPF) is a routing protocol developed for Internet Protocol (IP) networks by the Interior Gateway Protocol (IGP) working group of the Internet Engineering Task Force (IETF). What is the default administrative distance of the OSPF routing protocol?

A. 120 B. 100 C. 110 D. 90

Answer: C

Question:14 You work as a network technician for Company , and you wants to ensure that only a single Company server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and you are about to bring the server online. What can you do to ensure that only the MAC address of the Company server is allowed by switch port Fa0/1? (Choose two.)

A. Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors. B. Configure port Fa0/1 to accept connections only from the static IP address of the Company server. C. Configure the MAC address of the server as a static entry associated with port Fa0/1. D. Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the Company server.


Answer: C, D

Question:15 Look at the following exhibit. To connect the autonomous systems, which routing protocol should be used?

A. RIP B. BGP C. OSPF D. EIGRP

Answer: B

Question:16 You work as a network technician for Company Ltd. Study the topology displayed in the exhibit carefully. If all the links are operating at the same bandwidth,which ports will be STP designated ports? (Choose three.)


A. COPMANY -Switch-C - Fa0/1 B. COPMANY -Switch-A - Fa0/1 C. COPMANY -Switch-B - Fa0/0 D. COPMANY -Switch-B - Fa0/1

Answer: B, C, D

Question:17 Enhanced Interior Gateway Routing Protocol - (EIGRP) is a Cisco proprietary routing protocol loosely based on their original IGRP. A router has EIGRP configured as the only routing protocol. How does EIGRP respond if there is no feasible successor route to a destination network and the successor route fails?

A. It places the route in holddown until LSA updates inform it of a new route to the network. B. It immediately sends its entire routing table to its neighbors. C. EIGRP sends a Hello packet to the DR to inform it of the route failure. D. It sends queries out to neighbors until a new successor route is found.

Answer: D

Question:18 The following is the graphic and routing table for router COPMANY -R1. Based on the output of the COPMANY -R1# show ip route command and the information displayed in the graphic, which of the following is a potential routing problem?

A. the use of summarization for discontinuous networks B. the use of VLSM with a routing protocol that does not support it C. the use of CIDR with a routing protocol that does not support it


D. the use of the ip route 0.0.0.0 0.0.0.0 command with a routing protocol that does not support it

Answer: A

Question:19 In the Company network, three routers are connected together as shown elow: IP Addresses and routing for the network are configured as shown above. The Company network administrator issued the "show ip eigrp neighbors" command from router Company 1 and receives the output shown. Based on all the information shown above, which following statement is true?

A. The no auto-summary command configured on the routers prevents Company 1 and Company 2 from forming a neighbor relationship.

B. Routing is not completely configured on Company 3. C. The IP addresses are not configured properly on the Company 1 and Company 3 interfaces D. It is normal for router Company 1 to show one active neighbor at a time to prevent routing loops.

Answer: B

Question:20 You are a network administrator for Company Ltd. Study the exhibit carefully. Switch port FastEthernet 0/24 on COPMANY -ALSwitch1 will be used for creating an IEEE 802.1Q-compliant trunk to another switch. On the basis of the output presented, why the trunk does not form, even if the proper cabling has been attached?


A. The no shutdown command has not been entered for the port. B. The correct encapsulation type has not been configured. C. The port is currently configured for access mode. D. An IP address must be configured for the port.

Answer: C


For complete Exam 640-816 Training kits and Self-Paced Study Material

Visit:http://www.aonetesting.com/640-816.html

http://www.aonetesting.com


http://www.aonetesting.com/



exam 640-816 preparation questions

Documents

ip address of copmany

destination ip address

mask iv

source ip address

b question

network administrator

accesslist listnumber

snmpv2 answer