examview - cadd 2 midterm study guide 70 q · cadd 2 midterm exam_study guide_70 questions multiple...
TRANSCRIPT
Name: ________________________ Class: ___________________ Date: __________ ID: A
1
CADD 2 Midterm Exam_STUDY GUIDE_70 questions
Multiple Choice
Identify the choice that best completes the statement or answers the question.
____ 1. Producing computer generated drawings is called
a. CAD c. CIM
b. CAM d. GPS
____ 2.
The AutoCAD command to draw rounded corners is:
a. Ortho c. Array
b. Fillet d. Chamfer
____ 3.
The AutoCAD command to make single and multiple copies is:
a. Copy c. Mirror
b. Array d. Grid
____ 4.
The AutoCAD command to draw half an object and duplicate the other half is:
a. Copy c. Mirror
b. Array d. Grid
____ 5.
The AutoCAD command to edit the length of objects is:
a. Array c. Chamfer
b. Trim d. Ortho
____ 6.
The AutoCAD command to create arrangements of objects is:
a. Array c. Chamfer
b. Trim d. Ortho
____ 7.
The AutoCAD command to constrain points to be only horizontal or vertical is:
a. Array c. Chamfer
b. Trim d. Ortho
____ 8.
The AutoCAD command to remove portions of lines, circles and arcs is:
a. Array c. Chamfer
b. Break d. Ortho
____ 9.
The AutoCAD shortcut command to OFFSET an object is:
a. O c. P
b. Z d. T
____ 10.
The AutoCAD shortcut command to MOVE an object is:
a. A c. F
b. M d. Q
Name: ________________________ ID: A
2
____ 11.
The AutoCAD shortcut command to draw a LINE is:
a. E c. G
b. H d. L
____ 12.
The AutoCAD shortcut command to ZOOM is:
a. O c. P
b. Z d. T
____ 13. What is the diameter of a R 1 1/2 circle?
a. 1/4 c. 3
b. 3/4 d. 3 1/4
____ 14. Shapes mirrored about the center line are:
a. Symmetrical c. Similar
b. Matching d. Uniform
____ 15.
Which measurement in Figure D1003.03.02 is 1 1/4?
a. A c. C
b. B d. D
____ 16.
Which measurement in Figure D1003.03.02 is 1 3/4?
a. A c. C
b. B d. D
Name: ________________________ ID: A
3
____ 17.
Figure D1003.03.01
Identify the HIDDEN line in Figure D1003.03.01
a. A c. C
b. B d. D
____ 18.
Figure D1003.03.01
Identify the CENTER LINE line in Figure D1003.03.01
a. A c. C
b. B d. D
____ 19. In order to create a Hatch object in a drawing, it MUST:
a. be on its own Layer. c. be Annotative
b. be Associative d. be within a closed boundary
____ 20. Attic space used as living space is found in a:
a. One-story house c. One and one-half story house
b. Two-story house d. Ranch style house
____ 21. What is the minimum size for a front door?
a. 3’4” c. 2’-6”
b. 3’-0” d. 2’-0”
____ 22. What is the number of bedrooms in a typical residence?
a. 2 c. 4
b. 3 d. 5
____ 23. What exterior style features a gambrel roof?
a. Dutch Colonial c. French Colonial
b. Cape Ann d. Georgian
Name: ________________________ ID: A
4
____ 24.
The arrow on the tool palette above is used to create a
a.w ceiling c. door
b. stair d. window
____ 25.
The arrow on the tool palette above is used to create a
a.w ceiling c. door
b. stair d. window
Name: ________________________ ID: A
5
____ 26.
The arrow with a box at the end of it on the tool palette above is used to create a
a.w wall c. stair
b. roof d. railing
____ 27.
The arrow on the tool palette above is used to create a
a.w wall c. door
b. roof d. window
Name: ________________________ ID: A
6
____ 28.
The properties palette above is used to make changes for the _______ on the floor plan.
a. windows c. stairs
b. doors d. chimney
____ 29.
The shading display selected is set for
a. Realistic c. Wireframe
b. Conceptual d. Isometric
____ 30. When applying wall tool properties to linework you should
a. Highlight the wall tool c. Erase layout geometry
b. Select all the polylines you created d. All of the above
____ 31. A circle with an ‘x’ will appear indicating a fault error on walls that
a. Overlap c. All of the above
b. Different direction d. None of the above
Name: ________________________ ID: A
7
____ 32. To add fixtures and furnishing in AutoCAD Architecture
a. Launch the Design Center c. Press CTRL 9
b. Launch the Tool Palette d. Press CTRL 10
____ 33. If the preview shown in the Design Center does not appear as a 3D object
a. Select it, it will change in your
drawing
c. Double click and it will change to 3D
b. Do not select it, it is a 2D object d. None of the above
____ 34.
When you select a wall, blue grips appear. The blue arrow indicates
a. The Interior side of the wall c. The Corner of the wall
b. The Exterior side of the wall d. None of the above
____ 35.
The plan and elevation above is a
a. Swinging door c. Pocket door
b. Bi-fold door d. Overhead door
____ 36.
The plan and elevation above is a
a. Swinging door c. Pocket door
b. Bi-fold door d. Overhead door
Name: ________________________ ID: A
8
____ 37.
The plan and elevation above is a
a. Swinging window c. Double Hung windowb. Casement window d. Sliding window
____ 38.
The plan and elevation above is a
a. Swinging window c. Double Hung windowb. Casement window d. Sliding window
____ 39.
In the _________________ split-level home design, the house looks like a ranch from the front and a
two-story from the back. a. back-to-front c. side-by-side
b. front-to-back d. reversed
____ 40.
One-and-one-half-story homes generally have ___________ to provide additional light and
ventilation.a. skylights c. picture windows
b. glass sliding doors d. dormers
____ 41.
An analysis should be made of ____________ to determine if a house plan is as functional as it
could be.a. walking paths c. traffic movement
b. air circulation d. traffic circulation
Name: ________________________ ID: A
9
____ 42.
The most popular kitchen design is the ______________ kitchena. L-shaped c. straight- line
b. corridor d. U-shaped
____ 43.
The _________________ kitchen design is located along two adjacent walls.a. L-shaped c. straight- line
b. corridor d. U-shaped
____ 44.
An interior door should open into the bedrooma. True b. False
____ 45.
The largest bedroom is usually considered to be the ________________ bedroom.a. boys c. master
b. girls
____ 46.
A residential structure may be divided into ___________ basic areasa. three c. five
b. four d. six
____ 47.
A _____________ receptacle should be used in the bathrooma. shielded c. waterproof
b. grounded d. ground fault circuit interrupter
____ 48.
The usual height of an interior door is ______________________.a. 6’-2” c. 6’-6”
b. 6’-4” d. 6’-8”
____ 49.
In wheelchair-accessible homes, the entry door should have a clearing space of _____________
around it.a. 24” c. 30”
b. 26” d. 34”
Name: ________________________ ID: A
10
____ 50.
The reason that a ranch design is generally more expensive to build than a two-story home of the
same size is that _____________.a. it requires more roof area and more
foundation length
c. permits cost more to build a ranch home
b. it requires more windows and doors d. all of the above
____ 51.
One disadvantage of a two-story house is that ___________________a. it is more costly to heat because of the
height.
c. general exterior maintenance is usually
more difficult and costly.
b. it has little resale value d. none of the above
____ 52.
A current trend in architectural design that combines traditional and contemporary influences into
designs for truly modern structures is called _____________ architecture.a. postmodern c. modern
b. revival d. art deco
____ 53.
The basic roof style of the Cape Ann style is a _____________ roof.a. gambrel c. mansard
b. gable d. hip
____ 54.
The Cape Cod is one of the earliest and best known of the traditional ________ styles.a. Southern c. Eastern
b. Colonial d. European
____ 55.
The ________ style house gets its name from the shape of coffee, tea, cracker and salt boxes found
in colonial stores.a. Cape Ann c. Garrison
b. Gambrel d. Salt Box
Name: ________________________ ID: A
11
____ 56.
Fig 2012.108A
The architectural style shown in Fig 2012.108A is a. Cape Ann c. Garrison
b. Salt Box d. Gambrel
____ 57.
Fig 2012.108B
The architectural style shown in Fig 2012.108B is a. Cape Ann c. Southern Colonial
b. Ranch d. Gambrel
Name: ________________________ ID: A
12
____ 58.
Fig 2012.108C
The living room shown in Fig 2012.108C is considered part of this area in the house.a. Living Area c. Sleeping Area
b. Service Area d. None of the above
Name: ________________________ ID: A
13
____ 59.
Fig 2012.108D
The living room shown in Fig 2012.108D is considered part of this area in the house.a. Sleeping Area c. Living Area
b. Service Area d. None of the above
____ 60.
Fig 2012.108E
The kitchen style shown in Fig 2012.108E is ______________________________.a. U-Shaped c. Corridor
b. Island d. Peninsula
Name: ________________________ ID: A
14
____ 61.
Fig 2012.108F
The kitchen style shown in Fig 2012.108F is ______________________________.a. U-Shaped c. Corridor
b. Island d. Peninsula
____ 62.
Fig 2012.108G
The kitchen style shown in Fig 2012.108G is ______________________________.a. U-Shaped c. Corridor
b. Island d. Peninsula
____ 63.
Fig 2012.108HThe kitchen style shown in Fig 2012.108H is ______________________________.a. U-Shaped c. Corridor
b. Island d. Peninsula
Name: ________________________ ID: A
15
____ 64.
Fig 2012.108I
The kitchen style shown in Fig 2012.108I is ______________________________.a. L-Shaped c. Corridor
b. Island d. Peninsula
____ 65.
The garage is considered part of this area in the house.a. Sleeping Area c. Living Area
b. Service Area d. None of the above
____ 66.
The bathroom located closest to the bedroom is considered part of this area in the house.a. Sleeping Area c. Living Area
b. Service Area d. None of the above
____ 67.
Two popular home styles developed over _______ years ago are the Cape Cod and Cape Ann.a. 1000 c. 400
b. 600 d. 200
____ 68.
A primary feature of the Cape Ann home style was its _______________.a. large windows c. central chimney
b. double entry doors d. metal roofing
____ 69.
The _________ home style is basically a long, low, one-story house that originated in the
southwestern part of the United States.a. contemporary c. ranch
b. split-level d. Cape Cod
Name: ________________________ ID: A
16
____ 70.
_________ are not considered under the term “public accomodation” by the ADA.a. Multifamily housing structures c. Religious organizations
b. Private clubs d. All of the above
ID: A
1
CADD 2 Midterm Exam_STUDY GUIDE_70 questions
Answer Section
MULTIPLE CHOICE
1. ANS: A PTS: 1
2. ANS: B PTS: 1
3. ANS: A PTS: 1
4. ANS: C PTS: 1
5. ANS: B PTS: 1
6. ANS: A PTS: 1
7. ANS: D PTS: 1
8. ANS: B PTS: 1
9. ANS: A PTS: 1
10. ANS: B PTS: 1
11. ANS: D PTS: 1
12. ANS: B PTS: 1
13. ANS: C PTS: 1
14. ANS: A PTS: 1
15. ANS: A PTS: 1
16. ANS: C PTS: 1
17. ANS: C PTS: 1
18. ANS: D PTS: 1
19. ANS: D PTS: 1
20. ANS: C PTS: 1
21. ANS: B PTS: 1
22. ANS: B PTS: 1
23. ANS: B PTS: 1
24. ANS: D PTS: 1
25. ANS: C PTS: 1
26. ANS: C PTS: 1
27. ANS: B PTS: 1
28. ANS: B PTS: 1
29. ANS: A PTS: 1
30. ANS: D PTS: 1
31. ANS: C PTS: 1
32. ANS: A PTS: 1
33. ANS: B PTS: 1
34. ANS: B PTS: 1
35. ANS: B PTS: 1
36. ANS: D PTS: 1
37. ANS: C PTS: 1
38. ANS: D PTS: 1
39. ANS: B PTS: 1
ID: A
2
40. ANS: D PTS: 1
41. ANS: D PTS: 1
42. ANS: D PTS: 1
43. ANS: A PTS: 1
44. ANS: A PTS: 1
45. ANS: C PTS: 1
46. ANS: A PTS: 1
47. ANS: D PTS: 1
48. ANS: D PTS: 1
49. ANS: D PTS: 1
50. ANS: A PTS: 1
51. ANS: C PTS: 1
52. ANS: A PTS: 1
53. ANS: A PTS: 1
54. ANS: B PTS: 1
55. ANS: D PTS: 1
56. ANS: B PTS: 1
57. ANS: C PTS: 1
58. ANS: A PTS: 1
59. ANS: C PTS: 1
60. ANS: B PTS: 1
61. ANS: A PTS: 1
62. ANS: C PTS: 1
63. ANS: D PTS: 1
64. ANS: A PTS: 1
65. ANS: B PTS: 1
66. ANS: A PTS: 1
67. ANS: D PTS: 1
68. ANS: C PTS: 1
69. ANS: C PTS: 1
70. ANS: D PTS: 1