excel turret mill etm 2vs · etm 2vs 1-199-200 excel turret mill l versatile machine for drilling -...
TRANSCRIPT
82 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
ETM 2VS 1-199-200
Excel Turret Mill
l Versatile Machine for drilling - milling & boring operations. l Heavy duty & sturdy machine made with a generous size meehanite casting. l Rated for continuous use & long life expectancy. l Made to accurate engineering tolerances by highly skilled engineers during manufacture.l 3 HP Motor allows larger cuts to be taken during production runs. l R8 spindle allows a large selection of standard tooling to be used.l Automatic stop to up/down feed at the end of the preset travel. l Angular positioning to left/right through worm & gear for ease. l Reversible switch allows the spindle to run clockwise & anti-clockwise. l Centralised one shot lubrication ensures lubrication to all parts that are otherwise inaccessible. l DRO allows you to work in either imperial or metric calibrations. l Hardened slide ways give the machine a much longer production life. l Quill feed at 3 rates of Feed give you the option to select the correct feed to quill to suit your individual production requirements. l Servo type variable & rapid feeds are available for both longitudinal & cross feeds.l Electrically Interlocked spindle guard conforms to the latest CE regulations & health & safety standards.l 3 Axis DRO
Features 2VS & 3VS
Integrated switch panel& DRO
Milling headpivoting ± 45°
Depth stopadjustable
X axis servo type table feed .Continously variable & rapid traverse.
Large base tray
Y and Z axis servo type table feed. Continously variable & rapid traverse.
8382 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
ETM 2VS 1-199-200
Included as standard:l Power Feed to Quill – 3 Ratesl Servo Type Longitudinal, Cross & Vertical Feed & Rapidl One Shot Lubricationl Coolant Systeml Electrically Interlocked Spindle Guardl Low Volt Machine Light.
Optional Tooling/Accessories:
Optional Attachments:HMA-R8 Hori. Mill Att. R8 2VS/3VS 1-200-908RAA-R8 Right Angle Att. R8 2VS/3VS 1-200-909PD150 Power Draw Bar 2VS/3VS 1-200-986
ETM 3VS 1-199-300
See pages 102 - 128
Electrical Connection 400V. 3ph.50HZTable Size LxW (mm) 1246 x 230 1370 x 254 Table Slot Size 16mm / 3Table Travel (Long) (mm) 790 (690) 900 (800)Saddle Travel (Cross) (mm) 310 (270) 380 (340)
Knee Travel (Vertical) (mm) 390 350Quill Travel (mm) 127 Ram Travel (mm) 312 470Spindle Motor 2.2 kW (3hp)Spindle Taper R8Quill Power Feeds (3) 0.04, 0.08, 0.15 mm/rev Spindle Speeds (Rpm) 65 - 4500Spindle to Table (mm) 0 - 405 Spindle to Column (mm) 90 - 450 100 - 455Head Tilts L/R ± 90°Head Tilts F/B ± 45°
Dims (LxWxH) cm 220 x 160 x 200 255 x 220 x 224Weight Kg 1160 1420
Specification ETM 2VS ETM 3VS
Excel Turret Mill
Integrated switch panel& DRO
Milling head pivoting ± 45°
Depth stopadjustable
X axis servo type table feed .Continously variable & rapid traverse.
Large base tray
Z axis Motorised up and down
Y axis servo type table feed. Continously variable & rapid traverse.
Power Feed & DRO reduces travels(X by 100mm)(Y by 40mm)
84 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
ETM 4VS 1-199-400 Excel Turet Mill
l Versatile Machine for drilling - milling & boring operations. l Heavy duty & sturdy machine made with a generous size meehanite casting. l Rated for continuous use & long life expectancy. l Made to accurate engineering tolerances by highly skilled engineers during manufacture.l 3 HP Motor allows larger cuts to be taken during production runs. l R8 spindle allows a large selection of standard tooling to be used.l Automatic stop to up/down feed at the end of the preset travel. l Angular positioning to left/right through worm & gear for ease. l Reversible switch allows the spindle to run clockwise & anti-clockwise. l Centralised one shot lubrication ensures lubrication to all parts that are otherwise inaccessible. l DRO allows you to work in either imperial or metric calibrations. l Hardened slide ways give the machine a much longer production life. l Quill feed at 3 rates of Feed give you the option to select the correct feed to quill to suit your individual production requirements. l Servo type variable & rapid feeds are available for both longitudinal & cross feeds.l Electrically Interlocked spindle guard conforms to the latest CE regulations & health & safety standards.l 3 Axis DRO
Features 4VS & 5VS
Integrated switch panel& DRO
Milling headpivoting ± 45°
Depth stopadjustable
X axis servo type table feed .Continously vari-able & rapid traverse.
Large base tray
.
Z axis Motorised up and down
Y axis servo type table feed. Continously variable & rapid traverse
8584 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Excel Turet Mill ETM 5VS 1-199-500
Optional Tooling/Accessories:
Optional Attachments:HMA-ISO 40 Hor. Mill. Att. 4VS/5VS 1-200-940RAA-ISO 40 Right Angle Att. 4VS/5VS 1-200-941PD 200 Power Draw Bar 4VS/5VS 1-200-987
l Power Feed to Quill-3 ratel Servo Type Feed & Rapid for Longitudinal & Cross.l Motorised Up & Down Movement l One Shot Lubrication l Coolant Systeml Electrically Interlocked Spindle Guardl Large Size Base Trayl Low Volt Machine Lightl 3 Axis DRO
Included as standard:Electrical Connection 400V. 3ph.50HZTable Size LxW (mm) 1370 x 254 1500 x 305Table Slot Size (mm) 16mm / 3Table Travel (Long) (mm) 920 (820) 1000 (900)Saddle Travel (Cross) (mm) 410 (370) 360 (320)
Knee Travel (Vertical) (mm) 400 380Quill Travel (mm) 127Ram Travel (mm) 470 500Spindle Motor 3.75 kW (5 Hp)Spindle Taper ISO 40Quill Power Feeds (3) 0.04, 0.08, 0.15 mm/rev Spindle Speeds (Rpm) 65 - 3750Spindle to Table (mm) 0 - 400 0 - 350Spindle to Column (mm) 110 - 455 130 - 760Head Tilts L/R ± 90°Head Tilts F/B ± 45°
Dims (LxWxH) cm 255 x 220 x 224 260 x 220 x 230Weight Kg 1590 1700
Specification ETM 4VS ETM 5VS
Excel Turet Mill
See pages 102 - 128
Integrated switch panel& DRO
Milling headpivoting ± 45°
Depth stopadjustable
X axis servo type table feed .Continously variable & rapid traverse.
Large base tray
Y axis servo type table feed. Continously variable & rapid traverse.
Z axis Motorised up and down
Power Feed & DRO reduces travels(X by 100mm)(Y by 40mm)
86 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Opti Turret Mill
MF 2V 0333-6030 MF 4V 0333-6050
l Heavy, solid design using premium cast meehanite l Excellent concentricity thanks to tapered roller bearings, better than 0.01mm measured in the spindle sleeve l Automatic spindle sleeve feed l Right and left hand rotation for thread tapping l X and Z axis with adjustable dovetail guide l Coolant System
Features MF 2V :l Y axis with adjustable dovetail guide
MF 4V :l Y axis with flat guide l Large Y axis stroke of 400 mml Motorised table height adjustment with rapid motion (Z axis).
Optional Attachments:
Power Draw Bar 0335-2394
l Power Feed to Quill-3 ratel Servo Type Feed & Rapid for Longitudinal l Up & down Motorised for MF4Vl One Shot Lubrication l Coolant System
Included as standard:
Optional Tooling/Accessories:
l Electrically Interlocked Spindle Guardl Large Size Base Trayl Low Volt Machine Lightl 3 Axis DROl Frequency inverter Siemens
See pages 102 - 128
Electrical Connection 400V. 3ph. 50 HZTotal Connected Load 2.2 kW 4 kW Spindle Drive Motor 1.5 kW 3.0 kW Coolant Pump 100 WDrilling Capacity in Steel Ø 24 mm Ø 32 mmContinous Drilling in Steel Ø 20 mm Ø 28 mm
Face Mill Capacity Ø 76 mm Ø 100 mmEnd Mill Capacity Ø 18 mm Ø 20 mmSpindle Sleeve Travel 127 mm Spindle Taper ISO 40 Din 2080Spindle to Column 213 - 533 mm 200 - 680 mmSpindle Speeds RPM 10 - 5,100 9 - 6,750Gears 6 speed electronic control 8 speed electronic control Head Swivel ± 45° Automatic Spindle Feeds 3 steps 0.04 - 0.15mm/revSpindle to Table 57 - 463 mm 40 - 446 mm
Table Size LxW 1,244 x 230 mm 1,370 x 254 mmCross Table Max Load 230 Kg 275 KgTable T-Slots (size/amount/spacing) 16mm / 3 / 63 X axis Travel (Manual/Automatic) Man. 800 mm /Auto. 730 mm Man. 930 mm / Auto. 850 mmY axis Travel (Manual) Manual 305 mm Manual 400 mm Z axis Travel Manual 406 mm Manual 406 mm/Auto 350 mmDims LxWxH (cm) 140 x 145 x 215 150 x 145 x 220 Weight Kgs 950 1150
Specification MF 2V MF 4V
NEW
8786 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT
Opti Turret Mill Variable Speed with Siemens Sinamics G110 M Frequency inverter
Opti Control Panel Integrated switch panelIntegrated digital position display DPA 21 with speed display
Drilling/milling head Pivoting ± 45°Throat 215 - 533 mm - MF 2V 200 - 680 mm - MF 4V
Optional Power Draw Bar
Drilling depth stop Adjustable with millimetre scaleCan be read off on front
Frequency inverter Sie-mens Sinamics G110 M Quality made in EU
X axis Motorised table feedContinuously variable speed controlRapid traverseRight & left handed rotation