excellence in architectural metals
TRANSCRIPT
1
excellence in architectural metals
2
SAF is a processor, distributor and custom finisher of aluminum. We provide high quality finished and fabricated aluminum architectural products to the commercial construction industry. Through proven technical expertise and manufacturing flexibility, we maintain a consultative relationship with our customers, listening to their needs and concerns and providing the best result.
We are committed to a quality product and believe that the path to great business practices is through mutually beneficial, cooperative relationships with customers, employees and suppliers. As we produce products that meet or exceed industry standards, we strive for a level of customer satisfaction second to none.
Another value we strongly believe in is caring for natural resources. In addition to company resources, we believe that long lasting, high value products conserve the earth’s resources since such products will not have to be replaced.
SAF complies with all federal, state and local environmental regulations.
A Tradition of Success
Southern Aluminum Finishing Company (SAF) is among the nation’s leading
sources of aluminum finishing products and services. For over half a century,
subcontractors, architects, design and building contractors, owners and other
manufacturers have relied on SAF’s materials expertise in: custom fabrication,
coils, powder coatings, custom anodizing, paint finishes, pre-finished aluminum
sheet, architectural extrusions and architectural roofing products.
Owned and operated by the same family since 1946, SAF is the only service
center in the country with modernized anodizing and painting facilities, a full-
time fabrication center, in addition to a complete stock of sheet and extrusions.
As a result, SAF is able to provide our customers with proven expertise, first-rate
service and accountability – all under one roof.
In 2006, SAF celebrated its 60th anniversary – a significant milestone that we are
proud of. As we have done from the start, we strive to provide the highest quality
products, services and innovative solutions to our customers, as well as to provide
value to them each and every day. We thank you for your business and are proud
to be your supplier of aluminum fabrications and finishes.
Southern Aluminum Finishing Company
Southern Aluminum Finishing
John F. Kennedy, Jr., Library, installation by Madison Heights Glass Company, Ferndale, MI
3
Custom FabricationSAF is unique because our project management expertise brings together production
operations that are normally managed by several different firms. We offer project
management responsibility for metal, CAD, fabrication and finishing services, all under
one roof. When you do business with SAF, you will be assigned a project manager who
will work with SAF’s CAD services department and skilled metal craftsmen to bring your
project to a quick, reliable and profitable conclusion.
We buy coil and extrusion directly from primary aluminum mills, cut-to-length, form and
finish as needed for your individual project. We maintain an enormous stock of aluminum,
a full range of metal working equipment and can custom-finish aluminum products to order
with a quick turnaround time to meet your project goals. This provides our customers with
an unprecedented level of control and flexibility.
Our quick, reliable production processes are designed to meet the needs of the building
products market. We are a metal service center for the commercial construction market.
Our breadth of services and strategic focus on reliable delivery provide our customers
with an unprecedented level of control and flexibility with their building projects.
Give us a design challenge and our fabrication and finishing experts will create a solution.
SAF’s complete inventory, fabricating, anodizing and finishing facilities offer customers
unparalleled benefits in speed, quality and enduring aesthetics. Simply provide us with
drawings or sketches and we will respond with a complete written proposal and schematic
representation of our products for your building, typically in less than one business day.
800.241.7429 | www.saf.com
Capabilities• Shearing• Brake Forming (up to 20’ length)• CNC Punching and Notching • Rolling• Sawing (including complex miter cuts)• Welding (MIG, TIG, spot, stud and steel)• Drilling and Counter-sinking• CNC Routing and Cutting
Services• Anodizing • Painting (computerized custom color matching for KYNAR® and HYLAR® coatings)• Powder Coating (matching RAL colors) • In-House Design (shop and fabrication drawings)
Fabrication
“Hager Companies has enjoyed a long
lasting relationship with Southern
Aluminum Finishing for our anodizing
and painting needs. They provide us with
all of the essential components of an
effective value proposition: cost, quality,
and true customer service. The associates
of SAF are the true measure of our
relationship. Their commitment to service,
professionalism, and diligence has played
a large part in making Hager successful.” – Philip Mauter, Vice President of Oxford Operations, Hager Companies
Major Product Groups• Wall Panel Systems• Column Covers (exterior and interior)• Sunscreens, Canopies and Grilles• Ornamental Trim and Miscellaneous Architectural Fabrication (brake metal)• Non-Architectural Metal Fabrication• Designer Series Gutter and Cornice Systems (please see our website at http://www.saf.com/persys)
Materials Used• Aluminum, Aluminum Composite • Stainless Steel, Galvanized Steel• Copper Alloys
Hoover Public Safety Center, installation by G&S Glass and Supply, Pelham, AL
The Spire Building, installation by Glass Systems, Lithonia, GA
4
Southern Aluminum Finishing Company
• Angles-Equal Legs• Angles-Unequal Legs• Channels• Round Aluminum Pipe and Tube• Extruded Round Solid Rod• Extruded Schedule 40 Pipe• Hat Section• Rectangular Bar• Rectangular Tubing• Square Bar• Square Tubing• Tees• Threshold• Special Tube Profiles• Window Sill• Zees
A Sampling of Available Extruded Shapes
Aluminum ExtrusionWe inventory over 175 extruded shapes, available
for next-day shipment in a wide variety of anodized
finishes. Painted finishes are also available.
For your convenience, SAF offers a free, printer-
friendly poster, which serves as a guide to help clients
find the variety of aluminum extrusions and partial
sheet that we stock. SAF’s cut-to-length service applies
to any item on this poster. You may request additional
copies of this poster for your use, as well as additional
copies of our catalog, all at no charge. For more
information, please visit www.saf.com/poster.html
Aluminum SheetSAF wholesales anodized, pre-painted or mill finish
aluminum flat sheet. We are a master distributor of
5005 Anodized Quality sheet, with distributors of
coil and sheet throughout North America. We offer
an unequalled breadth of different thickness and
widths of 5005 in stock. We can apply custom spray
coatings in a few weeks as easily as we can distribute
pre-finished items for next-day shipment. SAF offers
the most advanced facility in the world for batch
anodizing. Our 100,000 square feet of aluminum
preparation and processing areas are equipped to
handle individual piece sizes up to 30” x 60” x 28”.Lawson State Community College, installation by G&S Glass and Supply, Pelham, AL
Below: Hargray Building, U.S.C. Beaufort, installation by Hill Construction Corp., Charleston, SC
5
AnodizingSAF has been finishing aluminum for the construction industry for 60 years. We estimate
that we have processed over two billion square feet of aluminum used on thousands of projects
worldwide. This unequaled experience in finishing aluminum allows us the unique position
of being able to give you an objective selection of the most suitable finish for your application.
Specify with Ease For many, specifying aluminum finishes is a difficult task. SAFINISH Designation System
simplifies the specifying process, while maintaining a quality of finish suitable for commercial
properties. For detailed information about recommended applications of SAFINISH coatings,
please see www.saf.com.
Specify for Reputation At SAF, we design our finishes to last and we stand behind our products. Aluminum finishing
is typically less than 1% of a project’s cost, but can be 100% of its appearance.
Specify AAMA 611 – Class I batch anodized aluminum for maximum life expectancy. Class I
is up to five times more corrosion resistant than typical distribution grade anodizing. AAMA
611 anodizing ensures enduring beauty. Your reputation depends on anodizing and maximum
durability. SAF anodizing consistently exceeds industry specifications.
For larger projects, color is controlled with microprocessor-based spectrocolorimeters for
guaranteed minimum color variation. SAF can provide panels from primary mill certified
coils of 5005 alloy for ultimate color quality and consistency. SAF Sales Engineers should be
consulted early in the project design to ensure the needed stock can and will come from a
single lot to ensure color uniformity.
“SAF did a nice job for us on the Kingstowne
Towne Center Project in Alexandria, VA. The
quality of the materials and workmanship
was excellent, as was their service from
estimating and project management through
production and shipping. We look forward to
working with SAF soon!”
– H. Michael Duffy, P.E., Galaxy Glass & Aluminum, Inc.
800.241.7429 | www.saf.com
6
Coil AnodizingThe advantages of coil anodizing stem from the careful use of automation and low labor
costs. In one continuous operation, aluminum coils are pretreated, anodized and sealed
to ASTM technical standards.
• 0.005 - .080 Gauge, up to 49” Coil Widths
• Satin matte, Embossed, Perforated Finishes
• Color Anodizing – Fade – resistant Dyes
• Up to 66” O.D., 10,000 lbs. Coil Weight
• Slitting
• Cut-to-length
• ASTM, ANSI, AAMA Testing Capability
• Application and Technical Specialists (including Chemical Engineers, P.E.’s)
Custom Painting/Power CoatingSAF has been a major Kynar 500® and Hylar 5000® PVDF coatings applicator for nearly forty
years. Custom matches, in addition to our 56 standard colors, are easy. Our paint facility is
designed for flexibility, offering quick turn around and mixed-color options.
All PVDF coatings are formulated to meet stringent AAMA 2605 standards. Their resistance
to chalking, UV deterioration, weathering and chemical breakdown are unsurpassed by any
other organic coating.
Kynar 500 is a registered trademark of Arkema, Inc.
Hylar 5000 is a registered trademark of Solvay Solexis, Inc.
Southern Aluminum Finishing Company
“This small office building remodel job we worked on required a lot of unusual fabrication details. We chose SAF to fabricate the composite aluminum panels because of their great customer service, competitive pricing, and attention to detail. We’ve been extremely satisfied with SAF, as their representatives carefully address every detail of any size job to make sure they are ‘just right’ before they ship an order.”
– Danny Knox, Owner and Vice President, George Knox Glass Co.
Candlelake Medical Building, installation by George Knox Glass Company, Oklahoma City, OK
Oak Hills High School, metal components manufactured by John W. McDougall Co., Nashville, TN
7
Perimeter Systems: Innovative Aluminum ArchitectureCornice Products (Designer Series)Designed to compliment our commercial gutter systems or to be used as an architectural
feature, you will find these innovative cornice trims to be beautiful, durable and cost
effective. Their unique interchangeable design allows you to customize your cornice or
you may select one of our many pre-designed cornices.
Commercial Gutter Systems (Designer Series)Our pre-engineered gutter products have been installed on universities, schools, financial
institutions, churches and stately homes throughout the United States since 1990. Designed
to withstand heavy snow and ice conditions, these commercial gutters feature four sculptured
fascia profiles, a concealed gutter liner, heavy duty support brackets and straps.
Commercial Gutter Systems (Industrial Series)Since their introduction in 1980, these rugged pre-engineered gutters have upheld an
unblemished record for performance and durability. Their extra large capacity makes them
ideal for use on shopping malls, strip centers, military installations and manufacturing
facilities.
Architectural Coping and Gravel Stop ProductsOur “Press-Loc Series” of copings and gravel stops have long been popular with both
architects and contractors due to their simple yet “high performance” design. Designed to
accommodate virtually all roofing membranes, these products carry some of the highest
Factory Mutual ratings available in the industry.
Perimeter Systems, a division of Southern Aluminum Finishing Company, Inc., designs and supplies both a Designer Series Gutter and Cornice Systems for the commercial and residential construction markets.
We all win with a cleaner environment. SAF is committed to the environment for the long term. Our award winning work in reducing air emissions, wastewater, hazardous waste, solid waste and energy usage means dramatically cleaner operations as well as reduced operating costs. Our customers reap the savings.
For more details log onto:www.saf.com/news.html
About Us
800.241.7429 | www.saf.com
8
Southern Aluminum Finishing – Architectural Aluminum Finishes and Flat Sheet Anodized Coatings, PVDF Painted Coatings, Powder CoatingsPaint and Anodized Finishes, Architectural Aluminum1581 Huber Street, N.W.Atlanta, GA 30318Telephone 404-355-1560Fax 404-350-0581Toll-free 1-800-241-7429
SAF Coil Anodizing Division – Architectural and Industrial Clear and Dyed FinishesCoil Anodizing, Slitting, Toll Coating1417 Poplar LaneNashville, TN 37210Telephone 615-259-2800FAX 615-259-4211Toll-free 1-800-241-7429
SAF Metal Fabrication Innovative Metal Architecture8370 E. Highway 78Villa Rica, GA 30180Telephone 770-942-1207FAX 877-949-4759Toll-free 1-800-241-7429
SAF Perimeter Systems Division – Innovative Aluminum ArchitectureArchitectural Cornice Work, Coping, Gravel Stops, Industrial Gutters143 Charlotte AvenueSuite 104Sanford, NC 27330Telephone 919-775-7353FAX 919-775-5652Toll-free 1-800-334-9823
MemberAluminum Anodizers CouncilNational Glass Association