exceptional workplaces - kcprofessional.com.au · g29 gloves order code:98111 ... colour coded cuff...
TRANSCRIPT
Together we can createExceptional workplaces
Product Catalogue 2015
Hand Protection Product Selector
www.kcprofessional.com.au
< Contents
PAGE 46
A comprehensive range of gloves providing the most appropriate hand protection to meet your needs.
Selecting the right gloveTo increase productivity and cost-effectiveness, workers must be able to work efficiently, comfortably and safely, protecting their hands against a broad spectrum of possible hazards.
Use the glove selector in order to determine the right glove for the right task.
The selector is a guide only. It is the responsibility of the employer to make sure the glove is suitable for its intended use. We suggest that you always check the latest version of KIMBERLY-CLARK PROFESSIONAL* product literature to get more information about the products or visit : www.kcprofessional.com
= Food Contact Approved
Level 3Level 4
G10 NitrileRange
G60Gloves
G60Sleeves
G80 Nitrile
Gauntlet
G80 Nitrile
G40 Polyurethene
Coated
G40 Latex
Coated
G40 Nitrile
Protection against cuts?
Full immersion?
Gloves SleevesTasks requiring
thermal protection?Level 5
PU CoatedLevel 5
Level 3PU Coated
Level 2(with thumbhole)
Level 3Dotted Palm
Level 2(without thumbhole)
Tasks requiring excellent abrasion
resistance?
NO
YES
YES
YES
YES NO
NO
NO
NO
YES
Protection against chemicals?
Mechanical protection?
YES
Flocklined
Splash only?
G20 Blue
Nitrile +
Gloves
KLEENGUARD* G10 Flex Blue Nitrile Gloves
General purpose gloves approved for food handling - HACCP accredited, PPE Classification: Category I
0.05mm thickness to guarantee dexterity and maximum touch sensitivity. Nitrile formulation combines resistance properties of nitrile and elasticity of latex
KLEENGUARD* G10 Arctic Blue Nitrile Gloves
General purpose gloves for a wide range of cleaning & handling tasks - HACCP accredited, PPE Classification: Category I
0.06mm thickness providing exceptional touch sensitivity ideal for intricate assembly work
KLEENGUARD* G20 Blue Nitrile + Gloves
General purpose gloves to protect hands against chemical splashes - PPE Classification: Category III
EN: 420
Exceptional tactile sensitivity, textured finger tips and beaded cuff for protection
KLEENGUARD* G10 Flex Blue Nitrile Gloves100 ambidexterous gloves box,10 boxes, 1000 gloves/case.
• Small Order Code 38519• Medium Order Code 38520• Large Order Code 38521• XLarge Order Code 38522
www.kcprofessional.com.au
< Contents
PAGE 47
KLEENGUARD* G10 Arctic Blue Nitrile Gloves200 ambidexterous gloves box,10 boxes, 2000 gloves/case.• Small Order Code 90096• Medium Order Code 90097• Large Order Code 90098
180 ambidexterous gloves box,10 boxes, 1800 gloves/case.• XLarge Order Code 90099
KLEENGUARD* G20 Blue Nitrile + Gloves100 ambidexterous gloves box,10 boxes, 1000 gloves/case.• Small Order Code 38707• Medium Order Code 38708• Large Order Code 38709
90 ambidexterous gloves box,10 boxes, 900 gloves/case.• XLarge Order Code 38710
PRODUCT TECHNICAL INFORMATION >
CHEMICAL PERMEATION CHART >
Dispensers
KCP Glove DispenserSingle, clear acrylicCompatible with: All G10, G20 gloves ORDER CODE:98111
KCP Glove DispenserDouble, clear acrylicCompatible with: All G10, G20 gloves ORDER CODE:98112
KCP Glove DispenserTriple, clear acrylicCompatible with: All G10, G20 gloves ORDER CODE:98113
Gloves
www.kcprofessional.com.au
< Contents
PAGE 48
JACKSON SAFETY* G35 Nylon Gloves12 pairs/bag,10 bags, 120 pairs/case.
• Small Order Code 38717• Medium Order Code 38718• Large Order Code 38719• XLarge Order Code 38720
JACKSON SAFETY* G35 Nylon GlovesProcess Protection Gloves
100% nylon, low lint & silicone free gloves to protect against process contamination
Seamless liner and shell to minimise irritation and provide breathability
G35 PRODUCT TECHNICAL INFORMATION >
Dispensers
KCP Glove DispenserSingle, clear acrylicCompatible with: G29 gloves ORDER CODE:98111
KCP Glove DispenserDouble, clear acrylicCompatible with: G29 gloves ORDER CODE:98112
KCP Glove DispenserTriple, clear acrylicCompatible with: G29 gloves ORDER CODE:98113
JACKSON SAFETY* G29 Solvent Protection Gloves
General purpose gloves to protect hands against chemical splashes - PPE Classification: Category III EN: 374
Exceptional tactile sensitivity, textured finger tips and beaded cuff for protection
JACKSON SAFETY* G29 Solvent Protection Gloves50 ambidexterous gloves box,10 boxes, 500 gloves/case.
• Small Order Code 49823• Medium Order Code 49824• Large Order Code 49825• XLarge Order Code 49826• XXLarge Order Code 49827
G29 PRODUCT TECHNICAL INFORMATION >
Gloves
JACKSON SAFETY* G40 Latex Coated Gloves12 pairs/bag,5 bags, 60 pairs/case.
• Size 7 Order Code 97270• Size 8 Order Code 97271• Size 9 Order Code 97272• Size 10 Order Code 97273• Size 11 Order Code 97274
www.kcprofessional.com.au
< Contents
PAGE 49
JACKSON SAFETY* G40 Gloves - Protect hands against mechanical hazards to get the job done safely.
All gloves have excellent abrasion and tear resistance, seamless knit liner to minimise irritation from seams
G40 Latex Coated GlovesSuitable for heat handling with EN 407 level 2 protection from latex coating - PPE Classification: Category II, EN388: 2142
G40 Foam Nitrile Coated GlovesGood wet grip (permeable) and excellent dry grip from foam nitrile coating - PPE Classification: Category II, EN388: 4131
G40 Smooth Nitrile Coated GlovesExcellent oil repellency with adequate working grip from smooth nitrile coating - PPE Classification: Category II, EN388: 3131
G40 Grey PU Coated GlovesPolyurethane coating on palm provides good working grip in oily conditions - PPE Classification: Category II, EN388: 3131
7
COLOUR CODED CUFF SIZE GUIDE:
Size:
Colour:
8 9 10 11
JACKSON SAFETY* G40 Foam Nitrile Coated Gloves12 pairs/bag,5 bags, 60 pairs/case.
• Size 7 Order Code 40225• Size 8 Order Code 40226• Size 9 Order Code 40227• Size 10 Order Code 40228• Size 11 Order Code 40229
JACKSON SAFETY* G40 Smooth Nitrile Coated Gloves12 pairs/bag,5 bags, 60 pairs/case.
• Size 7 Order Code 13833• Size 8 Order Code 13834• Size 9 Order Code 13835• Size 10 Order Code 13836• Size 11 Order Code 40152
JACKSON SAFETY* G40 Grey PU Coated Gloves12 pairs/bag,5 bags, 60 pairs/case.
• Size 7 Order Code 38726• Size 8 Order Code 38727• Size 9 Order Code 38728• Size 10 Order Code 38729• Size 11 Order Code 38730
PRODUCT TECHNICAL INFORMATION >
Gloves
JACKSON SAFETY* G60 Level 3 PU Coated Cut Resistant Gloves12 pairs/case.
• Size 7 Order Code 13823• Size 8 Order Code 13824• Size 9 Order Code 13825• Size 10 Order Code 13826• Size 11 Order Code 13827
www.kcprofessional.com.au
< Contents
PAGE 50
JACKSON SAFETY* G60 Gloves - A range of cost effective, durable gloves suitable for processes where there is cutting or laceration risk to workers hands.
Polyurethane coating for good working grip in dry and oily conditions
G60 Level 3 PU Coated Cut Resistant GlovesLevel 3 Cut Resistance, Level 4 Abrasion Resistance, PPE Classification: Category II, EN388: 4342
G60 Level 3 Knuckle Coated Cut Resistant GlovesLevel 3 Cut Resistance, Level 4 Abrasion Resistance, PPE Classification: Category II, EN388: 4342
G60 Level 5 Cut Resistant GlovesLevel 5 Cut Resistance, Level 4 Abrasion Resistance, PPE Classification: Category II, EN388: 4542
7
COLOUR CODED CUFF SIZE GUIDE:
Size:
Colour:
8 9 10 11
JACKSON SAFETY* G60 Level 3 Knuckle Coated Cut Resistant Gloves12 pairs/case.
• Size 7 Order Code 38731• Size 8 Order Code 38732• Size 9 Order Code 38733• Size 10 Order Code 38734• Size 11 Order Code 38735
JACKSON SAFETY* G60 Level 5 Cut Resistant Gloves12 pairs/case.
• Size 7 Order Code 38721• Size 8 Order Code 38722• Size 9 Order Code 38723• Size 10 Order Code 38724• Size 11 Order Code 38725
PRODUCT TECHNICAL INFORMATION >
Gloves/Sleeves
JACKSON SAFETY* G60 Level 2 Cut Resistant Sleeves460mm long, yellow,12 sleeves/bag,5 bags, 60sleeves/case.Order Code 90070
www.kcprofessional.com.au
< Contents
PAGE 51
JACKSON SAFETY* G60 Sleeves - Arm protection for processes where there is cutting or laceration risk to workers arms.
G60 Level 2 Cut Resistant Sleeves
Level 2 Cut Resistance - PPE Classification: Category II, EN388: 1521 (X24X - thumbloop)
Fully adjustable fit to different sizes for superior comfort
High breathability as material transfers heat away
G60 Level 5 Cut Resistant Sleeves
Level 5 Cut Resistance - PPE Classification: Category II, EN388: X24X
Fully adjustable fit to different sizes for superior comfort
High breathability as material transfers heat away
JACKSON SAFETY* G60 Level 2 Cut Resistant Sleeves460mm long, yellow,with thumbloop,12 sleeves/bag,5 bags, 60 sleeves/case.Order Code 90071
JACKSON SAFETY* G60 Level 5 Cut Resistant Sleeves460mm long, grey12 sleeves/bag,2 bags, 24 sleeves/case.Order Code 90075
PRODUCT TECHNICAL INFORMATION >
Gloves
www.kcprofessional.com.au
< Contents
PAGE 52
JACKSON SAFETY* G80 Gloves - Protect hands against chemical or mechanical hazards to get the job done safely.
Use with: oils, grease, acids, caustics and solvents
Textured palm and fingertips for grip
Flock liner wicks sweat away for easier donning and doffing
G80 Nitrile Chemical Resistant Gloves
PPE Classification: Category III, EN388: 4101, EN 374-3: AJK
Offering excellent chemical resistance and durability. High abrasion resistance
G80 Nitrile Chemical Resistant Gauntlets
PPE Classification: Category III, EN388: 4101, EN 374-3: AJK
Unlined to prevent lint contamination
460mm long to protect wrist and lower forearm G80 Neoprene Latex Chemical Resistant Gloves
PPE Classification: Category III, EN388: 2010, EN 374-3: AKL
Neoprene over Latex formulation to maximise protection and enhance flexibility and elasticity
JACKSON SAFETY* G80 Nitrile Chemical Resistant Gloves12 pairs/bag,5 bags, 60 pairs/case.
• Size 8 Order Code 94446• Size 9 Order Code 94447• Size 10 Order Code 94448• Size 11 Order Code 94449
JACKSON SAFETY* G80 Nitrile Chemical Resistant Gauntlets12 pairs/bag,1 bag, 12 pairs/case.
• Size 8 Order Code 25622• Size 9 Order Code 25623• Size 10 Order Code 25624• Size 11 Order Code 25625
JACKSON SAFETY* G80 Neoprene Latex Chemical Resistant Gloves12 pairs/bag,5 bags, 60 pairs/case.
• Size 7 Order Code 38741• Size 8 Order Code 38742• Size 9 Order Code 38743• Size 10 Order Code 38744
PRODUCT TECHNICAL INFORMATION >
CHEMICAL PERMEATION CHART >
Eyewear
www.kcprofessional.com.au
< Contents
PAGE 53
JACKSON SAFETY* Eyewear V10 ElementClear lens, 12 pairs/box.Order Code 25642
JACKSON SAFETY* Eyewear V20 PurityClear anti-fog lens, 12 pairs/box.Order Code 25654
JACKSON SAFETY* Eyewear V30 Nemesis 12 pairs/box,Clear lens (indoor)Order Code 20378Smoked mirror lens (outdoor)Order Code 20380
JACKSON SAFETY* Eyewear V40 Hellraiser12 pairs/box,Clear anti-fog lens (indoor)Order Code 28615Smoked lens (outdoor)Order Code 25714
PRODUCT TECHNICAL INFORMATION >
HellraiserV40
NemesisV30
PurityV20
ElementV10JACKSON SAFETY* Eyewear
Lens Description
Mirrored Lens – Reflects and reduces amount of light and heat that passes through the lens when working outdoors
Smoke Lens – For outdoor use when bright sunlight and glare cause eye strain and fatigue
Clear Lens – The highest optical clarity – allows maximum visible light transmission. Ideal for indoor applications
ALL EYEWEAR FEATURES:AS/NZS 1337 certified protective eyewear with 99.9% UVA/UVB protection to enhance worker comfort and safety
V10 Element:Economical, frameless wraparound eyewear with universal nose bridge
V20 Purity: Lightweight, wraparound eyewear with padded temples and clear anti-fog lense
V30 Nemesis: Lightweight, wraparound design with flexible nylon frame. Soft touch temples for long term comfort while wearing - choice of indoor clear or outdoor mirror lense
V40 Hellriaser:Lightweight, flexible eyewear with sunglass design- choice of clear anti-fog or smoked outdoor lense
Protective Clothing Product Selector
www.kcprofessional.com.au
< Contents
PAGE 40
A comprehensive range of apparel products providing the most appropriate personal protection to meet your needs.
Selecting the right apparel To increase productivity and cost-effectiveness, workers must be able to work comfortably and safely, being protected against a broad spectrum of possible hazards. Use the apparel selector in order to determine the right garment for the right task.
The selector is a guide only. It is the responsibility of the employer to make sure the apparel is suitable for its intended use. We suggest that you always check the latest version of KIMBERLY-CLARK PROFESSIONAL* product literature to get more information about the products.
A71 A20/A30/A40A
YES
YES
NO
LIQUIDS PARTICLES
SPLASH
WATER-BASED SOLVENT-BASED
<40%
JET <1 MICRON> 1 MICRON
YES
SPRAY
>40%
A40
YES
Protection from splash, spray or jet?
Full body protection?
Protection from potential hazardous substance?
Protection from liquids or particles?
Anti-static or low-lint requirement?
Particle >1 or<1 micron?
Anti-static or low lint requirement?
Water-based or solvent-based
chemical?
>40% or <40%chemical
concentration?
A71 A71 A71 A71 A40
Disposable Coveralls
KLEENGUARD* A20 Coveralls
Breathable Particle and Water-based liquid spray protection coveralls Suitable for protection against dusts, particulate matter and provides good repellency against light spray of water-based liquids
KLEENGUARD* A20 Coveralls feature three layers of polypropylene for protection whilst allowing air to circulate, increasing the body’s ability to cool down through the evaporation of perspiration.
Contoured hood with full length body zipper, elasticated cuffs, ankles and waist for better comfort and protection
Meets the requirements of EU StandardCE 0120 for a garment offering Type 6 &Type 5 protectionlevel of repellency against light sprays of water based liquids
KLEENGUARD* A20 Coveralls Orange, individually packed, 20 coveralls/case.
Medium Order Code 6411
Large Order Code 6412
XLarge Order Code 6413
XXLarge Order Code 6414
XXXLarge Order Code 6415
www.kcprofessional.com.au
KLEENGUARD* A20 Coveralls Blue, individually packed, 20 coveralls/case.
Small Order Code 6430
Medium Order Code 6431
Large Order Code 6432
XLarge Order Code 6433
XXLarge Order Code 6434
XXXLarge Order Code 6435
< Contents
PAGE 41
KLEENGUARD* Overalls SIZE GUIDE
SMALL Fits chest 96-104cm height up to 170cm
MEDIUM Fits chest 104-112cm height up to 176cm
LARGE Fits chest 112-120cmheight up to 182cm
XLARGE Fits chest 120-128cm height up to 188cm
XXLARGE Fits chest 128-136cm height up to 194cm
XXXLARGE Fits chest 136-144cm height up to 200cm
High performance SMS fabric
Outer layers – cloth-like, yet strong and abrasion-resistant spunbond polypropylene.
Middle layer – anintricate web of microfibres that filters out many water-based liquids and dry particulates.
KLEENGUARD* A20 Coveralls White, individually packed, 20 coveralls/case.
Medium Order Code 6421
Large Order Code 6422
XLarge Order Code 6423
XXLarge Order Code 6424
XXXLarge Order Code 6425
Disposable Coveralls
KLEENGUARD* A20+ Coveralls
Breathable Particle and Light Splash Protection Coverall Lightweight disposable coverall allowing breathability - designed for comfort to help wearer move more freely
Added thumbloops to prevent sleeve from riding up
An anti-static coverall that protects the wearer against hazards like dust, fibres and liquid splash
Single-use protective coverall certified as Complex Design (category 3) equipment offering protection to levels of Type 5/6 (2) coveralls
To provide high strength seams with barrier properties serged seams are used with triple overlock stitching.
Specially designed body, hood and waist for comfort and safety
Silicone free for critical areas
www.kcprofessional.com.au
KLEENGUARD* A20+ Coveralls White, individually packed, 25 coveralls/case.
Small Order Code 95150
Medium Order Code 95160
Large Order Code 95170
XLarge Order Code 95180
XXLarge Order Code 95190
XXXLarge Order Code 95200
< Contents
PAGE 42
KLEENGUARD* Overalls SIZE GUIDE
SMALL Fits chest 96-104cm height up to 170cm
MEDIUM Fits chest 104-112cm height up to 176cm
LARGE Fits chest 112-120cmheight up to 182cm
XLARGE Fits chest 120-128cm height up to 188cm
XXLARGE Fits chest 128-136cm height up to 194cm
XXXLARGE Fits chest 136-144cm height up to 200cm
PRODUCT TECHNICAL INFORMATION >
High performance SMS fabric
Outer layers – cloth-like, yet strong and abrasion-resistant spunbond polypropylene.
Middle layer – an intricate web of microfibres that filters out many water-based liquids and dry particulates.
CE0120
Certified EU Standard CE 0120 for a garment offering Type 6 & Type 5 protection
Breathable Coveralls
KLEENGUARD* A30 Coveralls
Particle and water-based liquid spray protection coverall with grey stretchable panels
Suitable for protection against dusts, particulate matter and provides good repellency againstlight spray of water-based liquids
KLEENGUARD* A30 Coveralls combinewearer comfort with required levels ofprotection.
Breathable SMS fabric is fittedwith strategically placed grey stretchablepanels designed to improve comfort,increase ease of movement and assist indriving compliance.
Elasticated hood, waist, cuffs and ankles with full length body zipper for better comfort and protection gives added comfort while working.
KLEENGUARD* A30 Coveralls White, individually packed, 25 coveralls/case.
Small Order Code 96141
Medium Order Code 96142
Large Order Code 96143
XLarge Order Code 96144
XXLarge Order Code 96145
XXXLarge Order Code 96146
www.kcprofessional.com.au
< Contents
PAGE 43
KLEENGUARD* Overalls SIZE GUIDE
SMALL Fits chest 96-104cm height up to 170cm
MEDIUM Fits chest 104-112cm height up to 176cm
LARGE Fits chest 112-120cmheight up to 182cm
XLARGE Fits chest 120-128cm height up to 188cm
XXLARGE Fits chest 128-136cm height up to 194cm
XXXLARGE Fits chest 136-144cm height up to 200cm
High performance SMS fabric
Outer layers – cloth-like, yet strong and abrasion-resistant spunbond polypropylene.
Middle layer – an intricate web of microfibres that filters out many water-based liquids and dry particulates.
Protective Coveralls
KLEENGUARD* A40 Coveralls
Water-based & Chemical Liquid and particle protection coverall
Suitable for general protection against dusts, particulate matter, radioactive particles
Provides protection against liquid aerosols, spray and light chemical splashes
Film laminate technology provide a barrier against a wide range of chemicals and hazardous particles
Particle protection holds out > 99% of fibres greater than 1 micron
Hood designed for respirator use and freedom of movement
Low lint, anti-static and silicone free
Compressed packaging provides auto-dispensing system and reduces storage space
Meets the requirements of EU Standard CE 0120 for a garment offering Type 6 & Type 5 protection
KLEENGUARD* A40 Coveralls White, individually packed.25 coveralls/case,
Small Order Code 99790
Medium Order Code 99791
Large Order Code 99792
XLarge Order Code 99793
XXLarge Order Code 99794
XXXLarge Order Code 99795
www.kcprofessional.com.au
< Contents
PAGE 44
PRODUCT TECHNICAL INFORMATION >
KLEENGUARD* Overalls SIZE GUIDE
SMALL Fits chest 96-104cm height up to 170cm
MEDIUM Fits chest 104-112cm height up to 176cm
LARGE Fits chest 112-120cmheight up to 182cm
XLARGE Fits chest 120-128cm height up to 188cm
XXLARGE Fits chest 128-136cm height up to 194cm
XXXLARGE Fits chest 136-144cm height up to 200cm
CE0120
Certified EU Standard CE 0120 for a garment offering Type 6 & Type 5 protection
Protective Coveralls
KLEENGUARD* A71 Chemical Permeation and Liquid Jet Protection Coveralls
Suitable for handling of aqueous chemicals, low pressure industrial cleaning and maintenance
Film laminate technology with sewn and taped seams provides a barrier against a wide range of chemicals, sprays and hazardous particles
Storm flap height and hood designed for better comfort and safety
Highly visible for improved worker safety
Elasticated hood, cuffs and waist designed for better comfort and safety
EN 14126 certified for protection against infective agents
Low-lint, anti-static and silicone free
PPE Classification CAT III, Type 3,4 & 5 certified
KLEENGUARD* A71 Coveralls Yellow, individually packed.10 coveralls/case,
Medium Order Code 96760
Large Order Code 96770
XLarge Order Code 96780
XXLarge Order Code 96790
XXXLarge Order Code 96800
www.kcprofessional.com.au
< Contents
PAGE 45
PRODUCT TECHNICAL INFORMATION >
KLEENGUARD* Overalls SIZE GUIDE
SMALL Fits chest 96-104cm height up to 170cm
MEDIUM Fits chest 104-112cm height up to 176cm
LARGE Fits chest 112-120cmheight up to 182cm
XLARGE Fits chest 120-128cm height up to 188cm
XXLARGE Fits chest 128-136cm height up to 194cm
XXXLARGE Fits chest 136-144cm height up to 200cm
CE0120
Certified EU Standard CE 0120 for a garment offering Type 3, 4 & 5 protection
Wiper Selection Guide
02 - Dispensing Systems
Which of our dispensing do you require for your task? • Would high capacity, a mobile system or hygienic single sheet dispensing be best in your environment? • Which size of wiping sheet would be most effective but not wasteful?• Do you need a special system to reduce product damage or prevent wipers becoming contaminated?
www.kcprofessional.com.au PAGE 20
< Contents
03 - Operating EffiencyWhat operational proceduresl do you need to consider?• Are you concerned about using less and throwing less away?• Is better wiping performance as important to you as the cost to the environment? • Are you wiping hazardous substances?
01 - Wiper PerformanceWhat wiper characteristics do you require to complete your task? • Highly absorbent, faster and more effective?• Strong and tear resistant? • Resistant to solvents? • Low lint? • Coloured for task segregation?• Disposable or reusable products?
When deciding what is most important with the task at hand, consider the following 3 areas:
RE-USABLE
6
5
4
3
LIMITED USE
2
1
SPECIALITIES
10
1WYPALL* L10 WipersFor light everyday wiping tasks
ABSORBTION STRENGTH ROUGH SURFACES
OIL & GREASE
SOLVENTS LIQUID SPILLAGE
DUST & GRIME
DELICATE SURFACES
PRODUCT SOLUTION
GO TO
WYPALL* Microfibre Cleaning Cloths Made for cleaning professionals
WYPALL* L20 WipersFor light everyday wiping tasks
WYPALL* L30 WipersSingle-use wiper for light duty tasks
WYPALL* X50 WipersVersatile & economic for light-duty tasks
WYPALL* X60 WipersVersatile & durable for general wiping tasks
WYPALL* X70 WipersFast absorbing wipers for medium duty tasks
WYPALL* X80 WipersStrong, bulky wipers, for tough wiping tasks
Single Use Wipers
WYPALL* L10 Roll Control CentrefeedTissue Wipers
For light everyday wiping tasks
A technically advanced Centrefeed Wiping system that cuts wiping consumption by up to 30% versus traditional centrefeed
Single sheet dispensing control use
HACCP certified and suitable for touching food contact surfaces
WYPALL* L10 Centrefeed Tissue Wipers
Low cost hygienic hand drying alternative or single use wipe ensures no cross-contamination
Lockable plastic dispenser discourages pilferage & waste
HACCP certified and suitable for touching food contact surfaces
Dispensers
ROLL CONTROLCENTREFEED DISPENSERCompatible with:94125, 94126Grey ABS plastic, lockableORDER CODE: 99989
www.kcprofessional.com.au
WYPALL* L10 Roll ControlCentrefeed WiperWhite, 790 wipers/roll,4 rolls/case,18cm x 38cm/300mORDER CODE: 94125
WYPALL* L10 Roll ControlCentrefeed WiperBlue, 790 wipers/roll,4 rolls/case,18cm x 38cm/300mORDER CODE: 94126
WYPALL* L10 Regular DutyCentrefeed WipersWhite, 1 roll/1 ply,4 rolls/case,18cm x 300m rollORDER CODE: 94121
WYPALL* L10 Heavy DutyCentrefeed WipersWhite, 1 roll/1 ply,4 rolls/case,20cm x 300m rollORDER CODE: 94120
WYPALL* L10 Heavy DutyCentrefeed Wipers,perforatedWhite, 1 roll/1 ply,4 rolls/case,20cm x 300m rollORDER CODE: 94122
ROLL CONTROLCENTREFEED DISPENSERCompatible with:94125, 94126White ABS plastic, lockableORDER CODE: 99337
CENTREFEED DISPENSERCompatible with:94120, 94121, 94122Smoke grey ABS plastic,lockableORDER CODE: 4940
< Contents
PAGE 21
< Contents
Solvent Resistance Absorption Capacity Wet Strength Absorption Rate
Single Use Wipers
WYPALL* L20 Centrefeed Tissue Wipers
For light everyday wiping tasks
Low cost hygienic hand drying alternative or single use wipe ensures no cross-contamination
Lockable plastic dispenser discourages pilferage & waste
HACCP certified and suitable for touching food contact surfaces
WYPALL* L30 Embossed Tissue Wipers
Single-use wiper for light duty tasks
Strong, absorbent single-use wiper for lighter duty maintenance tasks and cleaning
Ideal for single-use applications, enclosed wipers remain clean prior to use
Single sheet dispensing may reduce over use
HACCP certified and suitable for touching food contact surfaces
Dispensers
www.kcprofessional.com.au
WYPALL* L20 Heavy DutyCentrefeed Wipers,perforatedWhite, 1 roll/2 ply,4 rolls/case,20cm x 165m rollORDER CODE: 94124
WYPALL* L30Embossed WipersBlue, 200 wipers/3 ply,200 wipers/case,42cm x 39cmORDER CODE: 94185
WYPALL* L30Embossed WipersBlue, 75 sheets/3 ply,10 packs/case,42cm x 24cmORDER CODE: 94186
CENTREFEED DISPENSERCompatible with: 94124Smoke grey ABS plastic,lockableORDER CODE: 4940
SINGLE SHEETWIPER DISPENSERCompatible with: 94186Light grey ABSplastic, lockableORDER CODE: 92170
< Contents
PAGE 22
Solvent Resistance Absorption Capacity Wet Strength Absorption Rate
Solvent Resistance Absorption Capacity Wet Strength Absorption Rate
Reinforced Wipers
WYPALL* X50 Reinforced Wipers
Versatile and economic for light-duty tasks
Combines versatile performance with economical design
Scrim reinforcing for strength whether wet or dry
Available as unperforated roll
Ideal replacement for waste rag or tea towels
HACCP certified and suitable for touching food contact surfaces. Ideal for food preparation
Dispensers
www.kcprofessional.com.au
WYPALL* X50Single Sheet WipersBlue, 250 wipers/case,32.5cm x 49cmORDER CODE: 4199
WYPALL* X50Single Sheet WipersWhite, 400 wipers/case,34.5cm x 49cmORDER CODE: 4201
WYPALL* X50Single Sheet WipersWhite, 250 wipers/case,32.5cm x 24cmORDER CODE: 4202
WYPALL* X50POP-UP WipersWhite, 160 wipers/box,4 boxes/case, 24cm x 42cmORDER CODE: 4204
WYPALL* X50Single Sheet WipersWhite, 75 wipers/pack,8 packs/case, 24cm x 42cmORDER CODE: 4208
WYPALL* X50Single Sheet WipersBlue, 75 wipers/pack,8 packs/case, 24cm x 42cmORDER CODE: 4209
SINGLE SHEETWIPER DISPENSERCompatible with:4208, 4209Light grey ABS plastic,lockableORDER CODE: 92170
WALL MOUNTEDDISPENSERCompatible with: 4204Steel, wall mountedbracketORDER CODE: 4906
SINGLE SHEETWIPER DISPENSERCompatible with:4199, 4201, 4202Smoke acrylic, wallor bench mountingORDER CODE: 4927
< Contents
PAGE 23
Solvent Resistance Absorption Capacity Wet Strength Absorption Rate
Reinforced Roll Wipers
WYPALL* X50 Reinforced Wipers
Versatile and economic for light-duty tasks
Combines versatile performance with economical design
Scrim reinforcing for strength whether wet or dry
Available as unperforated roll
Ideal replacement for waste rag or tea towels
HACCP certified and suitable for touching food contact surfaces. Ideal for food preparation
Dispensers
www.kcprofessional.com.au
WYPALL* X50Large Roll WipersBlue, 70m roll,3 rolls/case,49cm x 70mORDER CODE: 4193
WYPALL* X50Small Roll WipersBlue, 70m roll,4 rolls/case,24.5cm x 70mORDER CODE: 4194
WYPALL* X50Large Roll WipersWhite, 70m roll,3 rolls/case,49cm x 70mORDER CODE: 4197
WYPALL* X50Small Roll WipersWhite, 70m roll,4 rolls/case,24.5cm x 70mORDER CODE: 4198
SMALL ROLLDISPENSERCompatible with:4194, 4198White enamel,wall mountedORDER CODE: 4915
LARGE ROLLDISPENSERCompatible with:4193, 4197White enamel,wall mountedORDER CODE: 4917
< Contents
PAGE 24
Solvent Resistance Absorption Capacity Wet Strength Absorption Rate
Multipurpose Cloth Wipers
WYPALL* X60Multipurpose Cloth Wipers
Versatile and durable for general wiping tasks
Can be used for delicate part cleaning, soaking up light spills, reaching difficult surface areas and hand wiping
Strong enough to scrub off adhesive, remove oil and debris
Suitable for applying lubricants, precision cleaning, glass cleaning and wiping
94222, 94223 & 94224 HACCP certified and suitable for touching food contact surfaces
Dispensers
www.kcprofessional.com.au
WYPALL* X60POP-UP WipersWhite, 130 wipers/box,10 boxes/case,23cm x 42.5cmORDER CODE: 94222
WYPALL* X60Small Roll WipersBlue, 80 wipers/roll,6 rolls/case,24.5cm x 42cmORDER CODE: 94223
WYPALL* X60Single Sheet WipersWhite, 100 wipers/pack,8 packs/case,28cm x 35cmORDER CODE: 94224
QUARTER FOLDWIPER DISPENSERCompatible with: 94224Clear PET, wall mountedORDER CODE: 4908
SMALL ROLLDISPENSERCompatible with: 94223White enamel,wall mountedORDER CODE: 4915
WALL MOUNTEDDISPENSERCompatible with: 4204Steel, wall mountedbracketORDER CODE: 4906
< Contents
PAGE 25
WYPALL* X60 Pop-up Poly WipersWhite, 23cm x 42.5cm115 wipers/bag, 12 bags/case.CODE: 94333
SINGLE SHEETWIPER DISPENSERCompatible with: 94333Light grey ABS plastic,lockableORDER CODE: 92170
Solvent Resistance Absorption Capacity Wet Strength Absorption Rate
Regular Duty Cloth Wipers
WYPALL* X70Regular Duty Cloth Wipers
Fast absorbing for medium-duty tasks
Quickly wipes away grease, oil and solvents
Stays soft and durable wet or dry - just rinse out and reuse, cutting waste
The ideal replacement for waste rag - keeps tools and machinery clean
HACCP certified and suitable for touching food contact surfaces
Dispensers
www.kcprofessional.com.au
WYPALL* X70 SingleSheet WipersWhite,300 wipers/case,35cm x 42cmORDER CODE: 94171
WYPALL* X70 SingleSheet WipersWhite,160 wipers/case,31.5cm x 42.5cmORDER CODE: 94174
WYPALL* X70Centrefeed RollWhite, 220 wipers/roll,4 rolls/ case,22.5cm x 38cmORDER CODE: 94178
BRAG BOXDISPENSERCompatible with: 94174Steel, wall mountedORDER CODE: 4920
CENTREFEEDDISPENSERCompatible with: 94178Smoke grey ABSplastic, lockableORDER CODE: 4940
< Contents
PAGE 26
Solvent Resistance Absorption Capacity Wet Strength Absorption Rate
Heavy Duty Cloth Wipers
WYPALL* X80Heavy Duty Cloth Wipers
Strong, bulky wipers for tough mainteneance and wiping tasks
Highly absorbent - especially of oil, can be used with solvents
Tear reisistant and strong enough to clean the roughest surfaces without falling apart
The ideal replacement for waste rag - keeps tools and machinery clean
HACCP certified and suitable for touching food contact surfaces
Dispensers
www.kcprofessional.com.au
WYPALL* X80 WipersPerforated Jumbo RollBlue, 475 wipers/roll,1 roll/case,31.7cm x 34cmORDER CODE: 41043
WYPALL* X80 WipersPerforated Jumbo RollWhite, 540 wipers/roll,1 roll/case,31cm x 34.5cmORDER CODE: 94173
WYPALL* X80 WipersSingle SheetWhite, 150 wipers,150 wipers/case,31.5cm x 42.5cmORDER CODE: 94176
BRAG BOXDISPENSERCompatible with: 94176Steel, wall mountedORDER CODE: 4920
JUMBO ROLLDISPENSERCompatible with:41043, 94173Steel, mobile trolleyORDER CODE: 4905
JUMBO ROLLDISPENSERCompatible with:41043, 94173Steel, wall mountedORDER CODE: 4951
< Contents
PAGE 27
Solvent Resistance Absorption Capacity Wet Strength Absorption Rate
Colour Coded Roll Wipers
WYPALL* Regular Duty Cloth Wipers
General purpose wipers suitable fora wide range of cleaning tasks
Colour coding for task segregation,reduces risk of cross-contamination
HACCP certified and suitable for touching food contact surfaces
Dispensers
www.kcprofessional.com.au
WYPALL* WipersGreen, 106 wipers/roll,6 rolls/case,34cm x 45mORDER CODE: 94142
WYPALL* WipersYellow, 106 wipers/roll,6 rolls/case,34cm x 45mORDER CODE: 94148
WYPALL* WipersBlue, 106 wipers/roll,6 rolls/case,34cm x 45mORDER CODE: 94152
ROLL WIPERDISPENSERCompatible with:94142, 94148, 94152, 9416234cm wide, steel,wall mountingORDER CODE: 4926
WHITE ENAMELDISPENSERCompatible with:94142, 94148, 94152, 9416238cm wide, white enamel,lockableORDER CODE: 4929
WYPALL* WipersRed, 106 wipers/roll,6 rolls/case,34cm x 45mORDER CODE: 94162
< Contents
PAGE 28
COLOUR-CODED CLEANING TASKS:
Red for toilets and washrooms
Blue for general cleaning
Green for kitchen & food preparation
Yellow for infectious & isolation areas
White for operating theatres
Colour Coded Wipers
WYPALL* Regular Duty Cloth Wipers
General purpose wipers suitable fora wide range of cleaning tasks
Colour coding for task segregation,reduces risk of cross-contamination
HACCP certified and suitable for touching food contact surfaces
www.kcprofessional.com.au
WYPALL* WipersRed, 20 wipers/pack,12 packs/case,60cm x 30cmORDER CODE: 94143
WYPALL* WipersYellow, 20 wipers/pack,12 packs/case,60cm x 30cmORDER CODE: 94144
WYPALL* WipersWhite, 100 wipers/box,6 boxes/case,32.5cm x 32cmORDER CODE: 94145
WYPALL* WipersWhite, 20 wipers/pack,12 packs/case,60cm x 30cmORDER CODE: 94146
WYPALL* WipersGreen, 20 wipers/pack,12 packs/case,60cm x 30cmORDER CODE: 94147
WYPALL* WipersBlue, 20 wipers/pack,12 packs/case,60cm x 30cmORDER CODE: 94151
< Contents
PAGE 29
COLOUR-CODED CLEANING TASKS:
Red for toilets and washrooms
Blue for general cleaning
Green for kitchen & food preparation
Yellow for infectious & isolation areas
White for operating theatres
Colour Coded Heavy Duty Wipers
WYPALL* Heavy Duty Cloth Wipers
Heavy duty wipers suitable fordemanding cleaning tasks
Colour coding for task segregation,reduces risk of cross-contamination
HACCP certified and suitable for touching food contact surfaces
Dispensers
www.kcprofessional.com.au
WYPALL* WipersBlue, 107 wipers/roll,4 rolls/case,30cm x 46mORDER CODE: 94159
WYPALL* WipersGreen, 107 wipers/roll,4 rolls/case,30cm x 46mORDER CODE: 94161
WYPALL* WipersBlue, 20 wipers/pack,12 packs/case,60cm x 40cmORDER CODE: 94153
ROLL WIPERDISPENSERCompatible with:94159, 9416130cm wide, steel,wall mountingORDER CODE: 4928
WYPALL* WipersGreen, 20 wipers/pack,12 packs/case,60cm x 40cmORDER CODE: 94164
< Contents
PAGE 30
COLOUR-CODED CLEANING TASKS:
Red for toilets and washrooms
Blue for general cleaning
Green for kitchen & food preparation
Yellow for infectious & isolation areas
White for operating theatres
Cleaning Wipers
www.kcprofessional.com.au
< Contents
PAGE 31
WYPALL* Cleaning Wipers
Pre-saturated, portable and ready to use anytime, anywhere
Ideal for manufacturing, engineering, maintenance, transport and service industries
Quickly and easily removes oil, grease and grime from hands, tools and machinery, without gels, rags, soap or water
Special formulation of natural and essential ingredients help reduce skin dryness
Design of fabric cleans quickly, effectively and economically
WYPALL* Cleaning Wipers BucketGreen, 90 wipes/bucket,6 buckets/case,27cm x 27cmORDER CODE: 7775
WYPALL* Cleaning Wipers RefillGreen, 75 wipes/pack,6 packs/case,27cm x 27cmORDER CODE: 7776
2
Textured surface and advanced cleaning agent efficiently break down and dissolve stubborn dirt and grime
Absorbent layer soaks up and holds the dirt preventing it returning to the hands
Smooth surface cleans off any remaining dirt whilst leaving the skin coated with moisturisers
PAGE 32
Microfibre Cloths
WYPALL* Microfibre Cloths
Created for cleaning professionals
Can be washed up to 300 times creating a cost effective choice for busy professionals
The cloth lifts and traps dirt from surfaces for fast and efficient cleaning
No need for cleaning chemicals - reduce annual cleaning cost
Available in 4 different colours for task segregation, helping minimise cross contamination
Green cloth has smooth texture for glass and mirror cleaning
MICROBAN® Antimicrobial product protection inhibits growth of stain and odour causing bacteria on the cloth
®Registered trademark of MICROBAN PRODUCTS COMPANY
www.kcprofessional.com.au
WYPALL*Microfibre ClothsYellow, 6 cloths/pack,4 packs/case,40cm x 40cmORDER CODE: 83610
WYPALL*Microfibre ClothsBlue, 6 cloths/pack,4 packs/case,40cm x 40cmORDER CODE: 83620
WYPALL*Microfibre ClothsGreen, 6 cloths/pack,4 packs/case,40cm x 40cmOrder Code 83630
WYPALL*Microfibre ClothsRed, 6 cloths/pack,4 packs/case,40cm x 40cmOrder Code 83980
< Contents
Specialty Wipers
KIMTECH* KIMTEX* Wipers
Critical task wipers for manufacturing environments
KIMTECH* wipers are ideal for tasks where precision and reliability are essential
100% polypropylene wiper which is treated with a surfactant for superior absorbency
Low lint & ideal for cleaning and prep of surfaces and parts
KIMTECH* EPIC* Wipers
Ideal for use with grease and oils
100% polypropylene wiper which canabsorb up to 4 times its own weight in oil
Dispenser
www.kcprofessional.com.au
KIMTECH* KIMTEX*Pop-Up WipersBlue, 40 wipers/box,4 boxes/case, 42cm x 34.5cmORDER CODE: 4130
KIMTECH* EPIC*Brag Box WipersBlue, 250 wipers/case,42cm x 34.5cmORDER CODE: 4155
KIMTECH* EPIC*Brag Box WipersWhite, 150 wipers/case,42cm x 34.5cmORDER CODE: 4157
BRAG BOXDISPENSERCompatible with: 4155, 4157Steel, wall mountedORDER CODE: 4920
< Contents
PAGE 33
Specialty Wipers
www.kcprofessional.com.au
< Contents
PAGE 34
Kimberly-Clark Oil Absorbents KCP Oil Absorbents selectively absorb oil-based liquids, but do not absorb water and chemicals. Can be used to control leaks, drips and spills of liquids such as lubricating oil, hydraulic fluids, gear oil, fuels and grease.
Kimberly-Clark Oil Absorbent Pads suited to hand wiping small spills, for placing under predictable leaks or as a work mat while servicing. Kimberly-Clark Oil Absorbent Socks are ideal barricades for keeping areas clean and dry from spills, for preventing larger spills from spreading and can be shaped to fit tight or uneven spaces.
Kimberly-Clark Oil Absorbent Sock350gsm, 7.62cm x 120cm,absorbent capacity 5.1kg per sock12 rolls/caseORDER CODE: 94202
Kimberly-Clark Oil Absorbent Pad300gsm, 40 x 50cm,Absorbent capacity 720g per pad, 100 pads/case.ORDER CODE: 94200
Surface Preparation Wipers
KIMTECH* Surface Preparation Wipers
Providing precision and reliability in controlled and critical cleaning tasks
Exceptionally clean wipers that contain no binders, chemical residue, or contaminants that can result in surface damage or rework
Low linting performance helps minimise the occurrence of defects and cross contamination from particulate matter
Choose From:Surface Preparation Wipers:A wiper suitable for all surface and component cleaning applications. High absorbency completing jobs faster and tackles aggressive solvents without falling apartSealant Wipers:Non-woven open structure, ideal for wiping sealant from tools and brushes. Microfibre Wipers:Cost-efficient, washable high quality polyester/polyamide wipers ideal for detailing and polishing surfaces
www.kcprofessional.com.au
KIMTECH* SurfacePreparation WipersWhite, 200 sheets/box,4 boxes/case, 30.5cm x 30.5cmORDER CODE: 7580
KIMTECH*Sealant WipersWhite, 500 sheets/box,1 box/case, 40cm x 50cmORDER CODE: 7642
KIMTECH* SurfacePreparation Microfibre ClothBlue, 25 cloths/box,1 box/case, 40cm x 40cmORDER CODE: 7589
< Contents
PAGE 35
< Contents
Surface Prep:
Sealant Wipers:
Microfibre Wipers:
Task Subtask Challenge/needs A2 P2 P3 C3 C4
Surface prep (before painting)
Pre-cleaning (degreasing) Solvent wipe
Paint stripping (chemical or mechanical) paint stripping
Solvent wash (can be either spray or wipe application of solvent)
Solvent application for washing
Drying
gniyrDesnir retaW
Surface prepSolvent cleaning
Lint-free drying
Sealing Surface prep (pre-cleaning) Solvent wipe
Sealant applicationExcess sealant removal (fresh or semi-cured sealant)
Maintenance (non-critical parts on engine, avionics, fuel systems, etc.)
epiw tnevloSgninaelC
gniyrd eerf-tniLgniyrD
Maintenance (critical parts on engine, avionics, fuel systems, etc.)
epiw tnevloSgninaelC
gniyrd eerf-tniLgniyrD
gniyrd eerf-tniLepiw laniF
Products
AVIATION WIPERS
)sehcni( L x W eziSgnigakcaPlairetaMnoitpircseD.oN edoC
Aviation Abrasive Surface Wipers
28648 KIMTECH* A2 Aviation Abrasive Surface Wiper Polyamide/Polyester 6 rolls/60 sheets/roll 12” x 12.5”
Aviation Surface Preparation Wipers
28643 KIMTECH* P2 Aviation Surface Preparation Wiper Polyester/Cellulose 4 boxes/200 sheets/box 12” x 12”
28647 KIMTECH* P3 Aviation Surface Preparation Wiper Rayon/Polyester 8 boxes/50 sheets/box 12” x 23”
Aviation Cleaning Wipes
28645 KIMTECH* C3 Aviation Cleaning Wiper Cellulose/polypropylene 6 rolls/60 sheets/roll 12” x 12.5”
28642 KIMTECH* C4 Aviation Cleaning Wiper Cellulose/polypropylene 1 roll/540 sheets/roll 12.2” x 13.5”
28646 KIMTECH* W Aviation Wet Wiper System 4 buckets 8.6” x 9.25”
Dispenser for Wet Wiper System for use with A2 & C3
Choose Your Product2
What Is Your Task?1
www.kcprofessional.com.au PAGE 36
< ContentsAviation Wiper Guide
All wipers are qualified and listed on PRI-QPL-AMS3819 and meet the requirements of AMS 3819C and BMS IS-SF aviation specifications.
Aviation Wipers
Aviation Wipers
KIMTECH* Aviation Wipers
Delivering leading-edge expert solutions,engineered for the precision standards ofaviation tasks
www.kcprofessional.com.au
KIMTECH* Aviation P3Surface Preparation Wipers50 wipers/box, 8 boxes/case,30 x 58.4 cmORDER CODE: 28647
KIMTECH* Aviation P2Surface Preparation Wipers200 wipers/box, 4 boxes/case,30.4 x 30.4 cmORDER CODE: 28643
KIMTECH* Aviation Wet Wiper System Bucket Dispenser4 buckets/caseCompatible with 28648, 28645ORDER CODE: 28646
KIMTECH* Aviation C3Cleaning Wipers60 wipers/roll, 6 rolls/case,30.4 x 31.7 cmORDER CODE: 28645
KIMTECH* Aviation C4Cleaning Wipers540 wipers/roll, 1 rolls/case,34.3 x 30.9 cmORDER CODE: 28642
< Contents
PAGE 37
KIMTECH* Aviation A2Abrasive Surface Wipers60 wipers/roll, 6 rolls/case,31.8 x 30.5 cmORDER CODE: 28648
Abrasive Surface WipersThe most durable aviation wipe in our offering specifically designed for abrasive surfaces
A
Surface Preparation WipersLeading-edge material for optimum linting and expendables control. The ultimate in aviation precision wiping performance
P
Cleaning WipersAn easy-to-implement lean cleaning solution that addresses wasre reduction and productivity improvement around general wiping needs
C
Wet Wiper SystemMore controlled dispensing and application of solvents for reduced waste and better overall performance versus traditional bucket/decanter systems and disposable pre-saturated options
W
A
P
P
C
C
W
Dispenser
Sanitising Wipers
KIMTECH* Wipers for the WETTASK* System
Refillable Wiping System for Industrial Applications
A portable dispensing system of dry wipersthat can be pre-moistened with a solution or chemical of your choice
Ready to use system that can save time and effort
Provides flexibility of using preferred solvents or chemicals
May reduce solvent consumption & limit chemical/solvent exposure
Wipers are compatible with many chemicals, solvents and sanitisers
www.kcprofessional.com.au
KIMTECH* WETTASK*WipersWhite, 60 sheets/roll,6 rolls/case,30.5cm x 31.8cmORDER CODE: 06001
KIMTECH* WETTASK*WipersWhite, 90 sheets/roll,6 rolls /case,30.5cm x 31.8cmORDER CODE: 06411
KIMTECH* WETTASK*WipersWhite, 35 sheets/roll,12 rolls/case,30.5cm x 31.8cmORDER CODE: 77320
Dispensers
KIMTECH* Wipers forthe WETTASK* SystemSpare BucketCompatible with:06001, 064115 buckets/caseORDER CODE: 77321
KIMTECH* Wipers forthe WETTASK* SystemSpare CanisterCompatible with:773206 canisters/caseORDER CODE: 77322
< Contents
PAGE 38
Scientific Wipers
KIMTECH SCIENCE* WIPERS
Range of wipers and products specifically designed for laboratory environments
Choose from:
Delicate Task Wipers - low linting and soft on
surfaces
Microfibre Wipers - streak free for cleaning
lenses
Bench Top Protectors - slip resistant
polyethylene
www.kcprofessional.com.au
KIMTECH SCIENCE* KIMWIPES* Delicate Task Wipers 280 sheets/box,30 boxes/case,21cm x 11cmORDER CODE: 34120
KIMTECH SCIENCE* KIMWIPES* Delicate Task Wipers 196 wipers/box,15 boxes/case,30cm x 30cmORDER CODE: 34133
KIMTECH SCIENCE*Large Microfibre WipersWhite, 20 wipers/carton,10 cartons/case,17.8cm x 17.8cmORDER CODE: 75540
KIMTECH SCIENCE*Bench Top ProtectorWhite/Green,152.4m/roll, 2 rolls/case,45.7cm x 76m/rollORDER CODE: 75450
< Contents
PAGE 39
AIRFLEX Fibres
AIRFLEX® TECHNOLOGY EXPLAINED… Conventional hand towels have compressed packed fibres which cause water to sit on top of the towel. This slows absorbency and can result in increased towel usage. Kimberly-Clark’s unique AIRFLEX® technology creates absorbency cells in every towel which drink up water fast. This dries your hands more quickly and helps reduce towel usage.
www.kcprofessional.com.au
AIRFLEX® TOWEL BENEFITS
AIRFLEX® paper towels absorb water up to 20 times faster than conventional paper towels for more effective drying. Cutting cost in use and reducing consumption.
Up to 50 per cent stronger when wet, so they dispense more easily and don’t break up in user’s hands, improving hygiene and washroom performance.
Softer and whiter, with a more luxurious texture, AIRFLEX® paper towels require fewer resources to manufacture and are suitable for recycling.
All AIRFLEX® towels are from independently audited sources incl. Greenpeace approved FSC, which guarantee sustainable forestry management.
TECHNICAL SPECIFICATIONSAppearance: White or blue cellulosic (paper) tissueIngredients:Cellulose fibre (CAS 9007-34-6) > 98%Organic Resins < 0.5%Inorganic Salts TraceBlue pigment (code 6668 only) < 2%Properties:Melting Point (deg C) N/AFlash Point (deg C) N/ASolubility in Water (g/L) N/ANot classified as hazardous according to the criteria of NOHSC
< Contents
PAGE 55
FSC Accreditation
www.kcprofessional.com.au
Kimberly-Clark Professional* appreciates the need for independent certification and statutory obligations. As manufacturers of the world’s leading tissue brand, we also feel we should exceed these expectations and develop partnerships, projects and practises that benefit our essential world. This is why we chose to pursue FSC accreditation.
About the FSC
The Forestry Stewardship Council (FSC) is internationally recognised as the world’s most rigorous environmental and social standard for responsible forest management. It is endorsed by WWF and Greenpeace as the gold standard of forestry management certification.
• The FSC is an independent, non-government, non-profit organisation andsince its beginning the FSC has certifiedover 130 million hectares of forests inover 80 countries.
• FSC certification is internationallyrecognised as the world’s most rigorousenvironmental and social standard forresponsible forest management.
• With FSC certification you can beassured that fibre is sourced fromresponsibly managed forests, is notcontributing to illegal logging or
destruction of high conservation value forests and that endangered wildlife habitats are not being negatively affected.
• It also gives assurance that the rights ofworkers and indigenous communitiesare respected.
KCP’s commitment to FSC
In 2011, Kimberly-Clark Corporation decreed that by 2015, 100% of its wood fibre will come from certified suppliers. As of July 2012, Kimberly-Clark Proferssional is pleased to announce that all its Australian manufactured tissue and paper towel products are now FSC certified*.
Responsible procurement, including the ethical sourcing of materials such as forest fibre, is a key focus area for Kimberly-Clark and is increasingly important to their customers.
learn more online >
The mark ofresponsible forestry
< Contents
PAGE 56
Gloves
www.kcprofessional.com.au
< Contents
PAGE 79
< BACK TO G10 G20 PAGE
G20 Blue Nitrile + Gloves
G10 Flex Blue Nitrile Gloves
G10 Arctic Blue Nitrile Gloves
Physical Properties
Length (mm)
220
230
240
250
Size
S
M
L
XL
• Seamless knit shell - Minimises finger irritation due to seam interference
• Nylon liner - Provides breathability and comfort • Low lint - Minimises process contamination
where lint could pose rework issues• Silicone Free on product contact area -
Minimises rework from silicone contamination• Double bagged - To avoid contamination
Ideal for:Automotive and aerospace segment tasks requiring low linting and silicone free features to avoid reworking. Also ideal wherever product and process protection is required.
G35 Nylon Gloves
< BACK TO G35 PAGE
Length (mm)
230 minimum
230 minimum
230 minimum
230 minimum
Palm Width (mm)
80
95
110
120
Size
S
M
L
XL
(mm)
0.05
0.06
0.04
Glove Tickness - minimum
Palm
Finger
Cuff
After Aging
14 Min
450 Min
Before Aging
15 Min
500 Min
Property
Tensile Strength (MPA)
Elongation (%)
• 0.06mm thickness provides exceptional touch sensitivity, ideal for intricate assembly work
• Latex Free - Reduces potential for Type 1 glove-associated reactions
• Textured fingertips - Good tactile sensitivity and improved grip• Powder free - Minimises drying effect of powder on skin• Beaded cuff - Added strength and ease of donning• Ambidextrous - Reduces time - improves efficiency. Excellent
cost-in use.• CE Marked - Category 1 - Sign of quality and protection• HACCP certified - Suitable for food handling
As measured by ASTM D412, Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension.Aged according to ASTM D573, Standard Test Method for Rubber – Deterioration in an Air Oven.
As measured by ASTM D6319, Standard Practice for Nitrile – Measurement of Dimensions* Product does not meet length requirements for EN 420
Ideal for:General handling, janitorial, contract cleaners, and catering. Small parts handling, electronics/precision assembly, other manufacturing and public service sector areas, food handling, general cleaning.
Length*
(mm)
240
240
240
Plalm Width (mm)
85
95
106
110
Size
S
M
L
XL
(mm)
0.08
0.05
0.04
Glove Tickness - minimum
Palm
Finger
Cuff
After Aging
14 Min
300 Min
Before Aging
14 Min
400 Min
Property
Tensile Strength (MPA)
Elongation (%)
• Latex Free - Reduces potential for Type 1 glove-associated reactions
• Textured fingertips - Good tactile sensitivity and improved grip• Powder free - Minimises drying effect of powder on skin• Beaded cuff - Added strength and ease of donning• Ambidextrous - Reduces time - improves efficiency. Excellent
cost-in use.• CE Marked - Category 1 - Sign of quality and protection• Independently accredited - Suitable for food handling• Regulation Standard - EN 420
Ideal for:Automotive, warehousing, engineering, cleaning, food processing and catering environments
* Average
Physical Properties
Measure
240mm (min)
0.12mm
Level 2 (EN374-2:2003)
Glove Properties
Length
Thickness
Resistance to Penetration
Test Results
Level 6
Level 6
Level 3
Chemical
Formaldehyde (37%)
Sodium Hydroxide (40%)
Isopropanol (70%)
Test Method
EN374-3:2003
EN374-3:2003
EN374-3:2003
0120
EN 374-2:2003
EN 407:2004
EN 374-3:2003
EN 388:2003
abcd
?
EN 374-2:2003
EN 407-2:2003
EN 374-2:2003
EN 407:2004
EN 374-3:2003
EN 388:2003
abcd
?
EN 374-2:2003
EN 407-2:2003
Level 2
• PPE Category III, providing protection against a wide range of chemical splashes
• Latex Free - Reduces potential for Type 1 glove-associated reactions
• Textured fingertips - Good dexterity, tactile sensitivity and improved grip
• Powder free - Minimises drying effect of powder on skin• Beaded cuff - Added strength and ease of donning• Ambidextrous - Reduces time - improves efficiency. Excellent
cost-in use.• CE Marked - Category 3 - Chemical splash protection• Regulation Standard - EN 420
Ideal for:Chemical splashes, painting, contract cleaners, agriculture, food processing, automotive, aviation, metal manufacturing, emergency services and public authorities.
Gloves
www.kcprofessional.com.au
< Contents
PAGE 80
< BACK TO PAGE
G40 Smooth Nitrile Gloves
G40 Latex Coated Gloves
G40 PU Coated Gloves
G40 Foam Nitrile Gloves• Seamless knit liner - Minimises finger irritation due to
seam interference• Nylon liner - Provides breathability and comfort • Nylon liner/Nitrile coating - Excellent Abrasion and
Tear Resistance EN 388: 4131• Foam Nitrile coating - Good wet grip (permeable) and
excellent dry grip. • Dark coating/liner - Hides dirt for longer wear
protection dry areas.
Ideal for: Wiring operations, light assembly (especially where oil is present), small parts handling (using tools and instruments), shipping & receiving, finishing and inspection areas.
Physical Properties
Length (mm) +/-10
220
230
240
250
260
Size
7
8
9
10
11
Palm Width (mm) +/-10
93
98
103
106
110
Mechanical Properties
Units
8000 Cycles
1.2 Index
50N
20N
Test Results
Level 4
Level 1
Level 3
Level 1
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
Resistance
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Physical Properties
Length (mm) +/-10
220
230
240
250
260
Size
7
8
9
10
11
Palm Width (mm) +/-10
93
98
103
106
110
• Seamless knit liner - Minimises finger irritation due to seam interference
• Nylon liner - Provides breathability and comfort • Nylon liner/Nitrile coating - Good abrasion and tear
resistance EN 388: 3131• Smooth Nitrile coating (palm) - Provides adequate
wet grip, and excellent oil repellency. Good mechanical protection in dry areas with good dry grip
• Dark coating/liner - Hides dirt for longer wear • Hand specific for better ergonomics
Ideal for: Mechanical, manufacturing and construction environments. Assembly and general handling,
Mechanical Properties
Resistance
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Units
2000 Cycles
1.2 Index
50N
20N
Test Results
Level 3
Level 1
Level 3
Level 1
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
• Seamless knit liner - Minimizes finger irritation due to seam interference.
• Nylon liner - Provides breathability and comfort • Nylon liner/PU coating - High level of tear and abrasion
resistance provide durability for longer wear: EN 388: 3131.• PU coating - Palm coated, Good dry and wet grip in slightly
oily conditions. Minimizes hand fatigue. Less longevity than nitrile.
• Grey coating/liner - Visibility for FOD Compliance. Color coding for separate tasks
• Excellent dexterity for handling small components Ideal for: Handling and assembly of electronic components, packaging, inspection, precision assembly, using delicate tools and sensitive instruments.
Physical Properties
Length (mm) +/-10
220
230
240
250
265
Size
7
8
9
10
11
Palm Width (mm) +/-10
93
98
103
106
110
Mechanical Properties
Resistance
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Units
2000 Cycles
1.2 Index
50N
20N
Test Results
Level 3
Level 1
Level 3
Level 1
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
Physical Properties
Length (mm) +/-10
230
240
250
260
270
Size
7
8
9
10
11
Palm Width (mm) +/-10
85
90
95
100
105
• Seamless knit liner - Minimises finger irritation due to seam interference
• EN 407 contact heat level 2 - Provides intermittent heat contact protection up to 250oC
• Crinkled latex coated palm and fingers - Good grip minimises hand fatigue
• Polyester liner/latex coating - Highest level of tear resistance for improved durability and EN 388: 2142
• Silicone free - Does not leave a residue after contact with unfinished metal components
• Black liner - Hides dirt for longer wear
Ideal for:General maintenance, shipping & receiving, assembly, concrete & brick handling, lumber handling, heat resistant tasks, heavy duty handling
Mechanical Properties
Properties
Abrasion Resistance (palm)
Cut Resistance (index)
Tear Resistance
Puncture Resistance
Heat Contact
Dexterity
Units
500
2.5
75N
20N
250C>15 secs
5mm (pin size)
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
EN407:2004
EN420:2003
Test Results
Level X
Level 1
Level 4
Level 2
Level 2
Level X
Gloves
www.kcprofessional.com.au
< Contents
PAGE 81
< BACK TO PAGE
G60 Level 3 PU Coated Cut Resistant Gloves
• Provides good protection against cuts and gashes • Durable Material Construction - Level 4 abrasion
resistance providing excellent durability. High breathability as material transmits heat away. High levels of comfort.
• Polyurethane Coating - with good dexterity• Level 3 Cut Resistance - resulting in reduced cuts
EN 388:4342• Conforms to EN420 Minimum cuff length providing
protection to the wrist area• Latex free
Physical Properties
Length (mm) +/-10
230
240
250
260
270
Size
7
8
9
10
11
Palm Width (mm) +/-10
90
95
100
105
110
Mechanical Properties
Resistance
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Units
8000 Cycles
5 Index
75N
60N
Test Results
Level 4
Level 3
Level 4
Level 2
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
Ideal for:Small part stamping, ceramic industry, durable goods (handling dry metal), materials handling (metal assemblies with sharp edges), general assembly (handling tools, air guns and small parts), wiring, forming, machining and bending of small parts.
G60 Level 3 Knuckle Coated Cut Resistant Gloves
• Provides good protection against cuts and gashes with back of the hand protection
• Durable Material Construction - Level 4 abrasion resistance providing excellent durability. High breathability as material transmits heat away. High levels of comfort.
• Polyurethane Coating - with good dexterity• Level 3 Cut Resistance - resulting in reduced cuts EN 388:4342• Conforms to EN420 Minimum cuff length providing
protection to the wrist area• Latex free
Physical Properties
Length (mm) +/-10
240
250
260
270
280
Size
7
8
9
10
11
Palm Width (mm) +/-10
95
100
105
110
112
Mechanical Properties
Resistance
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Units
8000 Cycles
5 Index
75N
60N
Test Results
Level 4
Level 3
Level 4
Level 2
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
Ideal for:Small part stamping, ceramic industry, durable goods (handling dry metal), materials handling (metal assemblies with sharp edges), general assembly (handling tools, air guns and small parts), wiring, forming, machining and bending of small parts.
G60 Level 5 Cut Resistant Gloves
• Provides high levels of protection against cuts and gashes • Durable Material Construction - Level 4 abrasion
resistance providing excellent durability. High breathability as material transmits heat away. High levels of comfort.
• Polyurethane Coating - with excellent dexterity• Level 5 Cut Resistance - resulting in reduced cuts
EN 388:4542• Conforms to EN420 Minimum cuff length providing
protection to the wrist area• Latex free• Grey Colour - for FOD compliance
Physical Properties
Length (mm) +/-10
240
250
260
270
280
Size
7
8
9
10
11
Palm Width (mm) +/-10
95
100
105
110
115
Mechanical Properties
Resistance
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Units
8000 Cycles
30 Index
75N
60N
Test Results
Level 4
Level 5
Level 4
Level 2
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
Ideal for:Pulp mills, newsprint, packaging and industrial converting paper, corrugated cardboard, coated paper, plywood and paperboard, metal fabrication, heavy material handling, sheet metal, glass handling, food processing.
Gloves
www.kcprofessional.com.au
< Contents
PAGE 82
< BACK TO G60 PAGE
G60 Cut Resistant Sleeves
G29 Solvent protection Gloves
< BACK TO G29 PAGE
• Blended Construction - providing intermittent heat protection up to 100oC; EN407 Level 1
• Level 2 Cut Resistance (EN388: x24x) - resulting in reduced nuisance injuries
• Cotton Liner - stops irritation and provide improved comfort with or without thumbloops
Mechanical Properties - Level 5
Resistance
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Units
100 Cycles
20 Index
25N
20N
Test Results
Level 1
Level 5
Level 2
Level 1
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
Mechanical Properties - Level 2
Resistance
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Units
-
2.5 Index
75N
-
Test Results
N/A
Level 2
Level 4
N/A
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
Level 2 Sleeves
• Durable Material Construction - High breathability as material transmits heat away. High levels of comfort and durability.
• Level 5 Cut Resistance - resulting in reduced cuts EN 388:1521
• Fully adjustable - to fit different size arms and keep sleeve in place. Connect with gloves to protect wrist area.
Level 5 Sleeve
Ideal for:Metal fabrication, glass handling, automotive assembly and all other applications where workers are tasked in the handling and assembly of sharp, glass or metal objects.
Physical Properties
Measure
295mm (min)
0.23mm
Level 2 (EN388:2003)
Glove Properties
Length
Thickness
Resistance to Abrasion
Chemical Protection
Test Results
Class 1
Class 1
Class 6
Class 1
Class 1
Class 6
Class 4
Class 3
Chemical
Methanol
n-Heptane
Sodium Hydroxide (40%)
Sulphuric Acid (96%)
Diestone DLS
Frekote
Isopropyl Alcohol (99%)
Skydrol
Test Method
EN374-3:2003
EN374-3:2003
EN374-3:2003
EN374-3:2003
EN374-3:2003
EN374-3:2003
EN374-3:2003
EN374-3:2003
• Silicone Free - Does not leave a residue after contact with unfinished metal components
• Textured fingertips - Provides excellence tactile sensitivity and dexterity• Powder free - Minimises drying effect of powder on skin• Beaded cuff - Added strength and ease of donning• Ambidextrous - Reduces time - improves efficiency. • HACCP Certified - Suitable for food handling• CE Marked - Category III - Chemical splash protection• Regulation Standard - EN 420
Ideal for:Handling of chemicals without immersive contact, cleaning, painting, car assembly, avaition servicing and food processing etc.
Gloves
www.kcprofessional.com.au
< Contents
PAGE 83
< BACK TO PAGE
G80 Neoprene Latex Chemical Resistant Gloves
Test Method
EN388:2003
EN388:2003
EN388:2003
EN388:2003
Test Results
Level 2
Level 0
Level 1
Level 0
Mechanical Properties
Abrasion Resistance
Blade Cut Resistance
Tear Resistance
Puncture Resistance
Property
A – Methanol (99.90%)
K – Sodium Hydroxide (40%)
L – Sulphuric Acid (96%)
Test Method
EN374-3:2003
EN374-3:2003
EN374-3:2003
Test Results
Level 2
Level 6
Level 2
Measure
305mm (minimum)
0,70mm (27.5 mil)
Level 2 (EN374-2:2003)
Property
Glove Length
Glove Thickness
Resistance to Penetration
• 2 Layer Neoprene/Latex - Neoprene over latex formulation to maximise protection and enhance flexibility and elasticity• Extra glove length and thickness - protects hand and forearm from solvents, acids, oils, fuels, grease and caustics• Straight cuff with flock liner - wicks sweat away from the hand for improved comfort and easier donning/doffing• Textured palm & fingertips - enhances wet/dry grip• Abrasion resistance rating - good degree of resistance to wear and tear. EN 388:2010 (ACTP)• Compliant with AQL 1.5 for pinholes - Provides improved chemical barrier• Hand specific for better ergonomics & reduced hand fatigue• Palm strengthened by special dip for extra protection
Ideal for:Aircraft assembly, automotive manufacturing, chemical plants, pesticide manufacturing and plant maintenance. Janitorial tasks, agriculture. Provides protection against oxidizing acids, bases,alcohols, oils, fats and solvents.
G80 Nitrile Chemical Resistant Gloves
• PPE Category 3 Protection with Level 4 Abrasive resistance - providing chemical resistance and durability
• Hand Specific - reducing hand fatigue• 4 sizes (8 – 11) - ensures good fit for secure handling• 21 mil thickness at fingertips - for high strength and excellent protection• Flock liner - wicks sweat away from the hand for improved comfort and easier donning/doffing• Textured palm and fingertips - enhances wet/dry grip• AQL 0.65 - provides better protection, more productivity & efficiency
Physical Properties
Test Method
EN388:2003 (Levels 1-4)
EN388:2003 (Levels 1-5)
EN388:2003 (Levels 1-4)
EN388:2003 (Levels 1-4)
Test Results
Level 4 - 8000 cycles
Level 1 - 1.2 (index)
Level 0
Level 1 - 20N
Mechanical Properties
Abrasion Resistance (palm)
Cut Resistance (index)
Tear Resistance
Puncture Resistance
Chemical Permeation
A – Methanol (CAS 67-56-1)
J – n-Heptane (CAS 142-85-5)
K – Sodium Hydroxide (CAS 1310-73-2)
Test Method
EN374-3:2003 (Levels 0-6)
EN374-3:2003 (Levels 0-6)
EN374-3:2003 (Levels 0-6)
Test Results
Level 3
Level 6
Level 6
Size
8
9
10
11
Length
330 mm
330 mm
330 mm
330 mm
Palm Width
110 mm
122 mm
134 mm
139 mm
Ideal for:Chemical processing, oil refining, petrochemicals, food processing, aerospace & automotive degreasing, automotive assembly & painting, machining operations using cutting oil and coolants, metal fabrication, graphic arts, printing cleanup, furniture manufacturing, electronics. Provides protection against oils, greases, acids, caustics, and solvents.
G80 Nitrile Chemical Resistant Gauntlets• 460 mm cuff - protects wrist and lower forearm allowing full immersion • PPE Category 3 Protection with Level 4 Abrasive resistance - provides excellent durability• Hand Specific - reducing hand fatigue• 4 sizes (8 – 11) - ensures good fit for secure handling• 21 mil thickness at fingertips - for high strength for excellent protection• Unlined - reducing the risk of lint contamination• Textured palm and fingertips - enhances wet/dry grip• AQL 0.65 - provides better protection, improved productivity and efficiency
Physical Properties
Test Method
EN388:2003 (Levels 1-4)
EN388:2003 (Levels 1-5)
EN388:2003 (Levels 1-4)
EN388:2003 (Levels 1-4)
Test Results
Level 4 - 8000 cycles
Level 1 - 1.2 (index)
Level 0
Level 1 - 20N
Mechanical Properties
Abrasion Resistance (palm)
Cut Resistance (index)
Tear Resistance
Puncture Resistance
Size
8
9
10
11
Length
460 mm
460 mm
460 mm
460 mm
Palm Width
218mm
232mm
260mm
288mm
Ideal for:Chemical processing, oil refining, petrochemicals, food processing, aerospace & automotive degreasing, automotive assembly & painting, machining operations using cutting oil and coolants, metal fabrication, graphic arts, printing cleanup, furniture manufacturing, electronics. Provides protection against oils, greases, acids, caustics, and solvents.
Chemical Permeation
A – Methanol (CAS 67-56-1)
J – n-Heptane (CAS 142-85-5)
K – Sodium Hydroxide (CAS 1310-73-2)
Test Method
EN374-3:2003 (Levels 0-6)
EN374-3:2003 (Levels 0-6)
EN374-3:2003 (Levels 0-6)
Test Results
Level 2
Level 6
Level 6
Eyewear
www.kcprofessional.com.au
< Contents
PAGE 84
< BACK TO PAGE
Physical Properties
Description
ANSI Z87.1+: 2010
9.5
Impact resistant
No
No
Polycarbonate lens and temple; Dielectric
Frameless
Ratcheted
Industrial manufacturing, outdoor environments, impact, splash, grinding/chipping, shaving/sanding
Metal Manufacturing - Transportation – Aviation & Automotive - Energy - Oil &Gas / Utilities - General Industrial Usage - Semi Conductor - Food Processing - Scientific
99.9% UVA/UVB/UVC protection
Store in a cool, clean and dry space away from direct sunlight.
V10 - Element
• Lightweight and economical
• Universal nose bridge for comfort
• Completely Dielectric
• Clear lens provides the highest optical clarity, allows maximum visible light transmission. Ideal for indoor applications
Properties
Standards
Base Curve
Protection
Arc Flash Rated
IRUV Rated
Materials
Frame Type
Temples
Uses
Segment
UV
Storage
Physical Properties
Description
ANSI Z87.1+: 2010 - EN 166: 2001
CSA Z94.3:2007 - AS/NZS 1337.1:2010
10.25
Impact resistant
No
No
Polycarbonate lens & frame, TPR temple; Dielectric
Framed
Ratcheted
Industrial manufacturing, outdoor environments, impact, splash, grinding/chipping, shaving/sanding
Metal Manufacturing - Transportation – Aviation & Automotive - Energy - Oil &Gas / Utilities - General Industrial Usage - Semi Conductor - Food Processing - Scientific
99.9% UVA/UVB/UVC protection
Store in a cool, clean and dry space away from direct sunlight.
V20 - Purity
• The new look in lightweight, protective eye wear
• Wrap-around lens for better eye protection
• Comfortable, padded temples
• Clear, anti-fog lens provides the highest optical clarity, allows maximum visible light transmission. Ideal for indoor applications
Properties
Standards
Base Curve
Protection
Arc Flash Rated
IRUV Rated
Materials
Frame Type
Temples
Uses
Segment
UV
Storage
V30 - A40Next page >
Eyewear
www.kcprofessional.com.au
< Contents
PAGE 85
< BACK TO PAGE
Physical Properties
Description
ANSI Z87.1+: 2010
EN 166:2001
AS/NZS 1337.1:2010
8
Impact resistant
No
No
Polycarbonate lens, nylon frame, nylon & PPEE temple
Framed
Ratcheted
Industrial manufacturing, outdoor environments, impact, splash, grinding/chipping, shaving/sanding
Metal Manufacturing - Transportation – Aviation & Automotive - Energy - Oil &Gas / Utilities - General Industrial Usage - Semi Conductor - Food Processing - Scientific
99.9% UVA/UVB/UVC protection
Store in a cool, clean and dry space away from direct sunlight.
A40 - Hellraiser
• Streamlined, sunglass styling
• 99.9% UVA/UVB protection
• Lightweight, flexible design
• Clear lens provides the highest optical clarity, allows maximum visible light transmission for indoor use
• Smoked lens for outdoor use where bright sunlight and glare can cause eye strain and fatigue
Properties
Standards
Base Curve
Protection
Arc Flash Rated
IRUV Rated
Materials
Frame Type
Temples
Uses
Segment
UV
Storage
Physical Properties
Description
NSI Z87.1: 2010 CSA Z94.3:2007 EN 166:2001AS/NZS 1337.1:2010
8
Impact resistant
No
No
Polycarbonate lens, nylon frame & temple; empilon nosepiece
Framed
Ratcheted
Industrial manufacturing, outdoor environments, impact, splash, grinding/chipping, shaving/sanding
Metal Manufacturing - Transportation – Aviation & Automotive - Energy - Oil &Gas / Utilities - General Industrial Usage - Semi Conductor - Food Processing - Scientific
99.9% UVA/UVB/UVC protection
Store in a cool, clean and dry space away from direct sunlight.
V30 - Nemesis
• Sleek, sporty style
• Soft touch temples for added comfort
• Every pair includes a neck cord
• Clear lens provides the highest optical clarity, allows maximum visible light transmission for indoor use
• Smoked mirror lens reflects and reduces amount of heat and light when working outdoors
Properties
Standards
Base Curve
Protection
Arc Flash Rated
IRUV Rated
Materials
Frame Type
Temples
Uses
Segment
UV
Storage
Chemical Permeation Chart
www.kcprofessional.com.au
< Contents
PAGE 86
< BACK TO G80 PAGE
Analysis has been carried out under laboratory conditions and should only be considered as a guide for use. Chemical performance quoted may not be representative of workplace duration of protection due to the other factors that may affect performance (abrasion, temperature, degradation etc.).
This information is not intended to replace a hazard analysis and risk assessment by a safety professional or professional judgment in the selection of Personal Protective Equipment (PPE). It is the responsibility of the user to assess the type of hazards and risks associated with exposure and then decide on the appropriate PPE for each circumstance.
The data in this guide is correct as at the date of print. The data is subject to change as additional knowledge and experience is gained. To view any supplements or updates please visit www.kcprofessional.com
When tested for chemical permeation, product performance is classified in terms of breakthrough time
Measured breakthrough time (min)
Permeation performance level
> 10 1> 30 2> 60 3> 120 4> 240 5> 480 6
JACKSON SAFETY* JACKSON SAFETY* KLEENGUARD* G80 Gauntlet G80 Gloves G20 Gloves
Test Chemical CAS number Permeation CE Rating Permeation CE Rating Permeation CE Rating break through (EN374-3:2003) break through (EN374-3:2003) break through (EN374-3:2003) time (min) time (min) time (min)
1,1,1-trichloroethane 71-56-6 >30 2 1,1,2,2, tetrachloroethane 79-34-5 >30 2 Acetic acid, glacial 64-19-7 >120 4 >60 3 0Acetic acid, 10% 64-19-7 >480 6Acetic acid, 25% 64-19-7 >480 6 0Acetone 67-64-1 0 0 0Acetonitrile, 5% 75-05-8 >60 3Acetonitrile 75-05-8 0 >10 1 Ammonium hydroxide, 20% 1336-21-6 >240 5 0Butanol 71-36-3 > 480 6 > 480 6 0Butyl acetate 123-86-4 >30 2 >30 2 Butyl cellosolve 111-76-2 >480 6 > 480 6 Carbon disulphide 75-15-0 >10 1 >10 1 Chlorine (gas), 100% 7782-50-5 > 480 6 Citric Acid Monohydrate, 30% 5949-29-1 >120 4Cyclohexane, 99.9% 110-82-7 >480 6 > 480 6 >10 1Cyclohexanol 108-93-0 >480 6 > 480 6 Cyclohexanone 108-94-1 >60 3 Diacetone alcohol 123-42-2 >120 4 Dibutyl phthalate 83-74-2 >480 6 Dichloromethane 75-09-2 0 0 Diethyleamine 109-89-7 >10 1 Diethylene glycol 111-46-6 > 480 6 Di-isobutyl ketone >240 5 Dimethyl acetamide 127-19-5 >30 2 >10 1 Dimethyl formamide 68-12-2 0Dimethyl sulphoxide >30 2 >10 1Ethanol, absolute 64-17-5 >480 6 0Ethanol, 95% 64-17-5 >240 5 0Ethanol, 70% 64-17-5 >10 1Ethidium Bromide, 1% 1239-45-8 >480 6Ethyl acetate 141-78-6 >10 1 >10 1 Ethyl ether 60-29-7 >10 1 >30 2 Ethyl glycol,100% 107-21-1 > 480 6 Ethyl glycol Ether 110-80-5 >240 5 Ethyl lactate 687-48-8 >480 6 Ethylene glycol 107-21-1 >480 6 Formaldehyde, 37% 50-00-0 > 480 6 >480 6Gasoline, white >480 6 Glutaraldehyde, 50% 111-30-8 >480 6Heptane, 99% 142-82-5 >480 6 > 480 6 Hexane 110-54-3 >480 6 > 480 6 0Hydrazene monohydrate 7803-57-8 > 480 6 Hydrazene monohydrate, 55% 7803-57-8 >480 6Hydrazine 60% 302-01-2 >480 6 Hydrochloric acid, 5% 7647-01-0 >480 6Hydrochloric acid, 32% 7647-01-0 >120 4Hydrochloric acid, 37% 7647-01-0 > 480 6 >30 2Hydrochloric acid 7647-01-0 >480 6 Hydrofluoric acid, 40% 7664-39-3 >120 4 Hydrogen peroxide, 30% 7722-84-1 > 480 6 >10 1Iron (III) Chloride, 40% 7705-08-0 >480 6Isopropanol, 99.5% 67-63-0 >480 6 > 480 6 >10 1Kerosene 8008-20-6 > 480 6 >10 1Lactic acid 85% 598-82-3 >480 6 > 480 6 Lauric acid 36% in ethanol 143-07-7 >120 4 Maleic acid, saturated 110-16-7 >480 6 Methanol 67-56-1 >30 2 >60 3 01 - methoxy - 2 - propanol, 55% 107-98-2 >60 3Methyl ethyl ketone 78-93-3 >10 1 0 Methyl methacrylate, 99% 80-62-6 >10 1 Methyl propyl ketone 107-87-9 >10 1 >10 1 Methyl tert-butyl ether, 99% 1634-04-4 >240 5 Mineral Oil 8012-95-1 >60 3Mineral Spirits 64475-85-0 0Monoethanolamine 141-43-5 >480 6 Muriatic acid 7647-01-0 >480 6 Naptha solvent >240 5 Nitric acid, 40% 7697-37-2 >480 6 > 480 6 Nitric acid, 50% 7697-37-2 >10 1Octyl alcohol 111-87-5 >480 6 > 480 6 ortho-Phosphoric acid 7664-38-2 >480 6 Perchloric acid 7601-90-3 >480 6 > 480 6 Petroleum ether 8032-32-4 > 480 6 Petrol unleaded > 480 6 Potassium hydroxide, 50% 1310-58-3 >480 6 > 480 6 Propanol 67-63-0 >480 6 Propyl acetate 109-60-4 >60 3 >10 1 Pyridine 110-86-1 >10 1 Sodium hydroxide, 40% 1310-73-2 > 480 6 >480 6Sodium hydroxide, 50% 1310-73-2 >480 6 >480 6Sodium hypochlorite, 13% 7681-52-9 >480 6 > 480 6 >480 6Sodium silicate 6834-92-0 >480 6 Sulphuric acid, 50% 7664-93-9 >480 6 >480 6Sulphuric acid, 96% 7664-93-9 >120 4 >120 4 0Tetrachloroethylene, 100% 127-18-4 >240 5 Tetrahydrofuran, 100% 109-99-9 0 Thinner >10 1 Tributyl - phosphate 126-73-8 >10 1Toluene 108-88-3 >30 2 >10 1 Triethanolamine 102-71-6 >480 6 Turpentine 8006-64-2 >480 6 > 480 6 0White spirit 64742-48-9 >480 6 White spirit 68551-17-7 >480 6 White spirit 8052-40-13 >480 6 > 480 6 Xylene (mixture of isomers) 1330-20-7 >60 3 >30 2
< BACK TO G20 PAGE
PASS
Average 10.9%
PASS
EN ISO 17941-4 (modified)
EN ISO 13982-2
EN1149-5:2008
Resistance to penetration by liquids (spray test)
Determination of resistance of suits to penetration by aerosols and fine particles
Surface Resistivity
Whole Garment Tests
Class 2 of 6Class 5 of 6 VisualClass 1 / 2* of 6Class 2 of 6Class 3 / Class 3Class 3 / Class 3PASSClass 3
EN 530 Mth 2ISO 7854 Mth BISO 9073-4EN 863EN ISO 6530 (10% NaOH)/(30%H2SO4)EN ISO 6530 (10% NaOH)/(30%H2SO4)EN 1146EN ISO 13935-2
Abrasion resistanceFlex cracking resistanceTrapezoidal tear resistancePuncture resistance Repellence to liquids Resistance to penetration by liquids Resistance to ignition Seam strength
Class(2) or ResultTest MethodFabric Tests
Property
Product Performance Data - A20+
(Tests performed with taping at wrists, ankles and hood)
(1) Provides no protection against radioactive radiation(2) As specified in European Standards documents Type 6 EN 13034:2005 and Type 5 to EN ISO 13982-1:2004
Protective Coveralls
www.kcprofessional.com.au
< Contents
PAGE 87
Fabric Tests
Abrasion resistance
Flex cracking resistance
Trapezoidal tear resistance
Puncture resistance
Tensile strength
Resistance to liquids
Resistance to penetration
Resistance to ignition
Seam strength
Surface resistivity
Class(3) or result
6
4
2
2
1
3/3
3/3
PASS
3
< 5 x 1010 ohm
Product Performance Data - A40
Whole Garment Tests
Resistance to penetration by liquids (mist test)
Determination of resistance of suits to penetration by aerosols and fine particles
Radioactive dust
EN 468 (modified)
pr ISO 13982-2
EN 1073-2:2002
PASS
Average TotalInward Leakage 5.09%
1
(Tests performed with taping at wrists, ankles and hood) (1) Full chemical test data: http://www.kcprofessional.co.uk/resources/chemical-protection-guide (2) Provides no protection against radioactive radiation
Chemical
Acetic Acid
Acetone
Acetophenone
Ethanol
Formaldehyde
Formic Acid
Heptane
Hydrochloric Acid
Nitric Acid
Sodium Hydroxide
Sulphuric Acid
Concentration
40%
100%
100%
95%
37%
40%
100%
37%
40%
48%
35%
Penetration
3
3
3
3
3
3
3
3
3
3
3
Chemical Permeation Data(3) - A40
Repellency
3
1
3
2
3
3
0
2
3
2
3
CAS No
64-19-7
67-64-1
98-86-2
64-17-5
50-00-0
64-18-6
142-82-5
7647-01-0
7697-37-2
1310-73-2
7664-93-9
In ISO 6530:2005 a measured quantity of the test chemical is applied to the fabric in the form of a fine stream or jet. The amount of chemical which penetrates and is repelled by the fabric is measured. The 3 classifications for penetration and repellency are defined in EN 14325:2004(3) Additional chemicals tested according to ISO 6530:2005
Test Method
EN 530 Mth 2
ISO 7854 Mth B
ISO 9073-4
EN 863
EN ISO 13934-1
EN 368 (10% NaOH/30%H2SO
4)
EN 368 (10% NaOH/30%H2SO
4)
EN 13274-4 Mth 3
EN ISO 13935-2
EN1149-1
Penetration
< 10%
< 5%
< 1%
Repellency
> 80%
> 90%
>95%
Class
1
2
3
EN ISO 13982-1:2004Type 5-B
Particle protection
EN 1073-2:2002Radioactive dust
contamination protection
A20
A70
A80
A45
A40
A50
A10
A 71
EN 1149-1:1995Antistatic
EN 13034:2005Type 6
Limited splash protection
Penetration test data available on Product Technical Bulletin - available from [email protected]
< BACK TO PAGE
< BACK TO PAGE
Protective Coveralls
www.kcprofessional.com.au
< Contents
PAGE 88
< BACK TO PAGE
Fabric Tests
Abrasion resistance
Flex cracking resistance
Trapezoidal tear resistance
Puncture resistance
Tensile strength
Resistance to permeation
Seam strength
Surface resistivity
– inside surface
Infective agents
Test Method
EN 530 Mth 2
ISO 7854 Mth B
ISO 9073-4
EN 863
EN ISO 13934-1
EN 374:3 (10% NaOH)
EN 374:3 (30% H2SO
4)
EN ISO 13935-2
EN 1149-1:1995
EN 14126:2003 (A)
Class(3) or result
6
2
2
2
1
6
6
3
< 5 x 1010 ohm
PASS
Product Performance Data - A71
Whole Garment Tests
Resistance to penetration by liquids (Jet test)
Determination of resistance of suits to penetration by aerosols and fine particles
Radioactive dust
EN ISO 17491-3
EN ISO 13982-2
EN 1073-2:2002
PASS
Average TotalInward Leakage 4.13%
1
(Tests performed with taping at wrists, ankles and hood) (1) Full chemical test data: http://www.kcprofessional.co.uk/resources/chemical-protection-guide (2) Provides no protection against radioactive radiation(3) As specified in European Standards documents EN 13034:2005 and EN ISO 13982-1:2004
EN 14605:2005Type 4-B
Spray tight clothing
EN 14605:2005Type 3-B
Liquid tight clothing
EN ISO 13982-1:2004Type 5-B
Particle protection
EN 1073-2:2002Radioactive dust
contamination protection
EN 14126:2003Infective agents
protection
A20
A70
A80
A45
A40
A50
A10
A 71A 71
CE0120 EN 1149-1:1995Antistatic
Chemical
Ammonium Hydroxide 1336-21-6
Ammonium Nitrate 6484-52-2
Ammonium sulphate solution 7783-20-2
Ethanol 64-17-5
Formic Acid 64-18-6
Hydrochloric acid 7647-01-0
Hydrofluoric Acid 7664-39-3
Hydrogen Peroxide 7722-84-1
Nitric Acid 7697-37-2
Nitrobenzene 98-95-3
Phosphoric Acid 7664-38-2
Sodium Hydroxide 1310-73-2
Sodium Hypochlorite 7681-52-9
Sulphuric Acid 7664-93-9
Concentration
10%
100%
35%
100%
50%
37%
40%
30%
70%
100%
5%
50%
10%
96%
Class
6
6
6
6
6
5
6
6
6
6
6
6
6
6
Chemical Permeation Data - A71
Result
>480
>480
>480
>480
>480
385
>480
>480
>480
>480
>480
>480
>480
>480
CAS No
Permeation data has been produced by independent accredited laboratories using the latest test method (currently EN ISO 6529:2001 Mth 2).Breakthrough time is the time taken for the tested chemical to reach a permeation rate of 1ug/cm2.min and 0.1ug/cm2.min at 20oC and environmental pressure.Permeation test data available on Product Technical Bulletin - available from [email protected]
Guaranteed Support
Guaranteed support
We are proud of our after sales service. Our network of distributors and sales representatives are on hand when you need them, the answer to any query you may have is just a phone call away.
Australia 1800 647 994 or email: [email protected]
www.kcprofessional.com.au
Our “no quibble” performance guarantee, covering all Kimberly-Clark Professional Products and dispensers, assures you of trouble-free performance by our recommended systems. The quality and consistency of our products allows us to offer a money back or replacement of stock guarantee for any performance troubles with our products. This guarantee only relates to performance, not defects or defective products (for which our customers are entitled to their remedies under the non-excludable consumer guarantees of theAustralian Consumer Law or New Zealand Consumer Guarantees Act).
Guarantee of Satisfaction
< Contents
PAGE 54
www.kcprofessional.com.au
< Contents
PAGE 89
KCP You Tube Channel < Contents
Community & Environment
Airflex* Demonstrations
Aquarius* Demonstrations
Products & Services
Industries
Healthy Workplace Project
The Efficient Workplace
- online video resources
Kimberly-Clark Professional has a wide range of useful video resources from product demonstrations, servicing guides, product profiles and our latest environmental policies. Click on the play links below to view the relevant content and see how they can help.
www.kcprofessional.com.au
Kimberly-Clark Australia Pty. LimitedA.B.N. 65 000 032 33352 Alfred Street Milsons Point NSW 2061Telephone AU 1800 647 994Email [email protected]
On the Website you can:• Check out the site for regular product news updates.• Find PDFs of brochures and technical bulletins.• Find information on our environmental practices.• Find other information such as dispenser specifications and diagrams.
SALES OFFICES
Sydney Melbourne BrisbaneTelephone (02) 9889 8871 Telephone (03) 9550 8055 Telephone (07) 3213 1155Facsimile (02) 9889 8891 Facsimile (03) 9550 8099 Facsimile (07) 3213 1188
Adelaide Perth AucklandTelephone (08) 8352 0505 Telephone (08) 9352 2020 Telephone (09) 250 2500Facsimile (08) 8352 0500 Facsimile (08) 9353 4783 Facsimile (09) 250 2511
CUSTOMER ORDER CENTRE CUSTOMER CARE – HELPLINE52 Alfred Street 1800 647 994 Nothing herein contained shall exclude, restrictMilsons Point NSW 2061 New Zealand 0800 447 814 or modify our liability under the Trade PracticesTelephone 1800 810 077 Email [email protected] Act 1974 or any other legislation of a State or TerritoryFacsimile 1800 812 255 www.kcprofessional.com of the Commonwealth of Australia or New Zealand.
® Registered Trademark / *Trademark Kimberly-Clark Worldwide, Inc. © KCWW
< Contents