exercise2 a pin joint and a roller support-static 1-2
DESCRIPTION
number 2 pin joint truss hypothesisTRANSCRIPT
Eutectic Metal
Simulation of exercise2 A pin joint and a roller supportDate: November-17-14Designer: Mahfuzul HaqueStudy name: Static 1Analysis type: Static
Table of ContentsDescription...............................................1Assumptions.............................................2Model Information.....................................2Study Properties.......................................3Units.........................................................4Material Properties...................................4Loads and Fixtures...................................5Connector Definitions...............................6Contact Information..................................6Mesh Information......................................7Sensor Details..........................................7Resultant Forces.......................................8Beams......................................................8Study Results............................................9Conclusion..............................................11
DescriptionNo Data
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 1
Eutectic Metal Mahfuzul Haque17/11/2014
Assumptions
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 2
Eutectic Metal Mahfuzul Haque17/11/2014
Model Information
Study PropertiesStudy name Static 1Analysis type StaticMesh type Beam MeshSolver type FFEPlusInplane Effect: OffSoft Spring: OffInertial Relief: OffIncompatible bonding options AutomaticLarge displacement OffCompute free body forces OnResult folder SolidWorks document (C:\Users\Mahfuzul
Haque\Documents\Truss)
UnitsUnit system: SI (MKS)Length/Displacement mmTemperature KelvinAngular velocity Rad/secPressure/Stress N/m^2
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 3
Eutectic Metal Mahfuzul Haque17/11/2014
Material PropertiesModel Reference Properties Components
Name: 6061 AlloyModel type: Linear Elastic
IsotropicDefault failure
criterion:Max von Mises Stress
Yield strength: 5.51485e+007 N/m^2
Tensile strength: 1.24084e+008 N/m^2
Elastic modulus: 6.9e+010 N/m^2Poisson's ratio: 0.33
Mass density: 2700 kg/m^3Shear modulus: 2.6e+010 N/m^2
Thermal expansion
coefficient:
2.4e-005 /Kelvin
SolidBody 1(Boss-Extrude1)(Part1),SolidBody 2(Boss-Extrude3)(Part1),SolidBody 3(Boss-Extrude2)(Part1)
Curve Data:N/A
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 4
Eutectic Metal Mahfuzul Haque17/11/2014
Loads and FixturesFixture name Fixture Image Fixture Details
Immovable-1
Entities: 1 Joint(s)Type: Immovable (No
translation)
Reference Geometry-1
Entities: 2 Joint(s)Reference: Front Plane
Type: Use reference geometryTranslation: ---, ---, 0
Rotation: ---, ---, ---Units: m, rad
Reference Geometry-2
Entities: 1 Joint(s)Reference: Face< 1 >
Type: Use reference geometryTranslation: 0, 0, ---
Rotation: ---, 0, 0Units: mm, rad
Load name Load Image Load Details
Force-1
Entities: 1 plane(s), 1 Joint(s)Reference: Front Plane
Type: Apply forceValues: ---, -700, --- lbf
Moments: ---, ---, --- lbf.in
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 5
Eutectic Metal Mahfuzul Haque17/11/2014
Load name Load Image Load Details
Force-2
Entities: 1 Beam (s)Reference: Face< 1 >
Type: Apply forceValues: ---, 7.5, --- lbf
Moments: ---, ---, --- lbf.in
Connector DefinitionsNo Data
Contact Information
Contact Contact Image Contact Properties
Global Contact
Type: BondedComponents: 1
component(s)Options: Compatible
mesh
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 6
Eutectic Metal Mahfuzul Haque17/11/2014
Mesh InformationMesh type Beam Mesh
Mesh Information - DetailsTotal Nodes 253Total Elements 249Time to complete mesh(hh;mm;ss): 00:00:01Computer name: MAH_HAWK
Sensor DetailsNo Data
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 7
Eutectic Metal Mahfuzul Haque17/11/2014
Resultant ForcesReaction ForcesSelection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -1201.02 4715.12 9.42966e-007 4865.67
Reaction MomentsSelection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 2.54841e-005 -3.90463e-005 -2.03127e-006 4.6671e-005
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 8
Eutectic Metal Mahfuzul Haque17/11/2014
BeamsBeam Forces
Beam Name
Joints Axial(N) Shear1(
N)Shear2(
N)Moment1(N
.m)Moment2(N
.m)Torque(N.
m)Beam-1(Boss-Extrude
1)
1 -265.531 2758.72 9.92334e-005 5.25982e-007 0.00669579 2.43165e-
0152 265.531 -2758.72 -9.92844e-
005 1.9725e-005 -2523.47 -3.25131e-014
Beam-2(Boss-Extrude
3)
1-
2.40803e-005
-2443.28 3.87741e-005 4.6062e-005 -0.00652415 -3.04052e-
006
2 0.00122295 442.374 -3.45204e-
005 6.78412e-005 2199.74 3.06715e-006
Beam-3(Boss-Extrude
2)
1 -265.531 -353.901-
0.000114672
-1.92806e-005 2523.48 3.12736e-014
2 265.532 353.901 0.000118405 -7.7299e-005 -2199.75 -2.05892e-
008
Beam StressesBeam Name
Joints
Axial(N/m^2)
Bending Dir1(N/m^2)
Bending Dir2(N/m^2)
Torsional (N/m^2)
Worst Case(N/m^2
)Beam-1(Boss-
Extrude1)
1 -365844 0.228248 -1452.81 8.59316e-010 367297
2 -365844 -8.55958 -5.47527e+008
-1.14897e-008 5.47893e+008
Beam-2(Boss-
Extrude3)
1 -0.0331773 19.9884 1415.57 -1.07442 1435.592 -1.68496 -29.4395 4.77286e+008 1.08383 4.77286e+008
Beam-3(Boss-
Extrude2)
1 -365844 -8.36676 -5.47528e+008
1.10511e-008 5.47894e+008
2 -365845 33.5436 -4.77286e+008 -0.00727556 4.77652e+008
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 9
Eutectic Metal Mahfuzul Haque17/11/2014
Study Results
Name Type Min MaxStress1 SX: X Normal Stress -53.0613 psi
Element: 1820.0047254 psiElement: 169
exercise2 A pin joint and a roller support-Static 1-Stress-Stress1
Name Type Min MaxDisplacement1 URES: Resultant Displacement 0 mm
Node: 69512.387 mmNode: 193
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 10
Eutectic Metal Mahfuzul Haque17/11/2014
Name Type Min Max
exercise2 A pin joint and a roller support-Static 1-Displacement-Displacement1
Name TypeShear-Moment Plot1 Shear Force in Dir1
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 11
Eutectic Metal Mahfuzul Haque17/11/2014
Name Type
exercise2 A pin joint and a roller support-Static 1-Shear-Moment Plot-Shear-Moment Plot1
Conclusion
Analyzed with SolidWorks SimulationSimulation of exercise2 A pin joint and a roller
support 12