ext. psu specification for approval€¦ · 1.更新新的ip logo ... i.t.e power supply model no....

Ideal Power LtdIdeal Power, Ideal House, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, EX32 7NZ, England, UK Tel: +44 (0) 845 260 3400 Email: [email protected] Web: www.idealpower.co.uk

Ideal Power Ltd Product Specification Document

111296-0801

(A4)

HK-AJ-120A200-CP HKSC-111296

VENDOR APPROVED SIGNATURES

DATE:

CUSTOMER APPROVED SIGNATURES

PART NO:

SPECIFICATION FOR APPROVAL

DESIGNED NO:

MODEL NO:

DESCRIPTION:

CUSTOMER:

REV:

2014.02.09繪圖員

何寶玲

經理

2014.02.09田青松歐陽建瓊

工程師2014.02.09

FEB.09th.2014

I.T.E POWER SUPPLY

Web: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401

Ideal Power, 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZ

Description Ext. PSU

Model Number 25HK-AJ-120A200-CP

Revision A4

Notes -


SAFETY APPROVAL:ENGINEER APPROVAL:

ELECTRICAL STRUCTURAL

MODEL NO REV

PART NO

REMARKSDESCRIPTION

SPECIFICATION CHANGE HISTORY

QR-工-26A

REV DATE

CUSTOMER

HK-AJ-120A200-CPHKSC-111296

(A4)

汪韋變更：將Plug頭改為音叉帶溝.11.08.22A1

胡鵬歐陽建瓊張偉松

馮丹A2 13.10.211.更新新的IP logo（Update the new logo ）.2.更新FCC Logo (Update new FCC logo)3.將 C-TICK 改為 RCM, (Label change C-Tick to RCM)

Add the PSE logo on the label and information under Point 15.0 SAFETY

1.在白盒上蓋加印客戶P/N 和 RoHSP/N: 25HK-AJ-120A200-CP-SA & also the RoHS label)

2.銘板增加PSE安規,承認書第15項增加PSE安規信息13.10.23A3 馮丹

何寶玲14.02.09

變更:1.更新EMC標準和加法文警告標語. (update EMC standard and French warning words) 2.新銘板上的安規logo. (Update the safety logo on the label)

A4

Page 2 of 12


11. PROTECTION10. INSULATION RESISTANCE9. DIELECTRIC STRENGTH (Hi-Pot) TEST

14. RELIABILITY AND QUALITY CONTROL15. SAFETY16. OVERALL DRAWING

19. MARKING18. PACKING

12. ENVIRONMENTAL CONDITIONS13. EMI/ EMC

1. INTRODUCTION2. INPUT REQUIREMENTS

5. LINE REGULATION6.HOLD UP TIME7.TURN ON TIME8.TEMPERATURE COEFFICIENT

3. OUTPUT REQUIREMENTS4. EFFICIENCY

DESCRIPTION : I.T.E POWER SUPPLY

MODEL NO. :PART NO. :

CONTENTS

2014.02.09REV: (A4)

PAGE NO. :ISSUED DATE:

17. USE SPECIFICATION

1 OF 11HKSC-111296

HK-AJ-120A200-CP

20. TEST REPORT

Ideal Power, 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZWeb: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401Page 3 of 12


2.2 Input Frequency Range: 47 Hz to 63 Hz 2.1 Input Voltage Range: 100(-10%)VAC to 240(+10%)VAC

This document specifies a switching power supply with a output of +12V, and electronic process. The switching power supply will provide power for technology equipments including electrical business equipment.The adaptor meets the requirement of lead free and RoHS.

PAGE NO. :

REV: (A4)ISSUED DATE:

3.3 Output Load Range: 2.0A

2.4 Input In-rush Current: 50A Max

2.5 Input Current: 0.8A Max

3.2 Output Regulation:

3.1 Output Voltage:3.0 OUTPUT REQUIREMENTS

+12V

11.4-12.6V

2.0 INPUT REQUIREMENTS

PART NO. :MODEL NO. :


1.0 INTRODUCTION

2014.02.092 OF 11HK-AJ-120A200-CP

HKSC-111296

2.3 Input Power Consumption at no-load : 0.3W Max

82.22%≧

3.4 Output Ripple & Noise: 200mV Max @20MHz bandwidth with

7.0 TURN ON TIME: 2S Max at 110VAC full load.

10UF/50V capacitance and 104/50V ceramic capacitor.

4.0 EFFICIENCY: @ average of 25/50/75/100% loads 115/230VAC input

6.0 HOLD UP TIME: 10ms Min at 110VAC full load.

5.0 LINE REGULATION: 2% maximum

Ideal Power, 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZWeb: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401

Page 4 of 12


overload shall provide automatic recovery for the output voltage.

11.2.2 Short Circuit Protection: Auto Recovery.

11.2 Output Protection

11.2.1 Output Current:

The switching power supply has a 2 Amps inner current fuse to protect itself.

9.2 Finished product withstands AC 3.0KV, for 2 second, 4mA Max primary to

9.1 Finished product withstands AC 3.0KV, for 2 second, 4mA Max primary to

PAGE NO. :

REV: (A4)ISSUED DATE:

secondary.

11.1 Input Protection

11.0 PROTECTION

10.0 INSULATION RESISTANCE

9.0 DIELECTRIC STRENGTH (Hi-Pot) TEST

Primary to secondary: 50M OHM to 500VDC.

8.0 TEMPERATURE COEFFICIENT: 0.05%/°C

MODEL NO. :PART NO. :DESCRIPTION : I.T.E POWER SUPPLY

2014.02.09

case.

3 OF 11HK-AJ-120A200-CP

HKSC-111296

Overload conditions shall decrease the output voltage Removal of an

output


Page 5 of 12


The burn-in test will be performed at least 2 hours at 40 centigrade degrees

When the operation is compling with this specification, the switching power supply s MTBF will be 50,000 hours at 25 centigrade degrees.

The switching power supply can withstand the following environmental conditions:

ISSUED DATE:REV: (A4)

PAGE NO. :

14.1 Burn-in

under full load condition.

14.2 MTBF

15.0 SAFETY

13.0 EMI / EMC

Relative Humidity: 10% ~ 95%

Relative Humidity: 10%~95%

12.1 Storage Temperature:-20℃ ~ +70 ℃

12.2 Operation

14.0 RELIABILITY AND QUALITY CONTROL

Temperature:0°C~40°C

12.0 ENVIRONMENTAL CONDITIONS

DESCRIPTION : I.T.E POWER SUPPLYPART NO. : MODEL NO. :

2014.02.094 OF 11HK-AJ-120A200-CP

HKSC-111296

The switching power supply has approved by the following standards:

The switching power supply has approved by the following safety standards:

IEC61000-4-6. IEC61000-4-8. IEC61000-4-11.)

(1)EN55022(EN61000-3-2. EN61000-3-3) (2)EN55024(IEC61000-4-2. IEC61000-4-3. IEC61000-4-4. IEC61000-4-5.

FCC PART 15B

AS/NZS 60950-1:2003 +A1+A2+A3. EN60950-1: 2006+A11+A1+A12

UL60950-1 2nd Edition ,2007-03-27 CSA C22.2 NO.60950-1-07,2nd Edition.2007-03

BS EN60950-1: 2006

AS/NZS 55022/55024


J55022(H22)

Page 6 of 12


35-J不加強筋

UNIT: mm


16. OVERALL DRAWING


REV: (A4)2014.02.09

PAGE NO. : ISSUED DATE:

5 OF 11HK-AJ-120A200-CP

HKSC-111296

36.0±146.0±1

88.5±1

1800±30

30±1

0

AW

G#18

SPT-1

12±0.5

Safety Marking

鐵粉芯

27.0

0

30.6

0

14.50

加強筋

音叉帶溝

Ø5.5±0.1

Ø2.1±0.1


Page 7 of 12


REV: (A4)


DESCRIPTION : I.T.E POWER SUPPLYPART NO. :MODEL NO. :

2014.02.096 OF 11HK-AJ-120A200-CP

HKSC-111296

UK

HK-03

2.5A 250V~EN 60320-1

HON-KWANG

46.0±1 36.0±1

88.5±1

UNIT: mm


Page 8 of 12




REV: (A4)2014.02.09


17. USE SPECIFICATION

7 OF 11

WARNING!

HK-AJ-120A200-CP

HKSC-111296

Please don't insert article alone at the wall.


Page 9 of 12


2014.02.09REV: (A4)

18.1 Inner Box

UNIT: mm


MODEL NO. :

18. PACKING

PART NO. :PAGE NO. :ISSUED DATE:

8 OF 11HK-AJ-120A200-CP

HKSC-111296

NOTICE:Its probably different from the white box of the sample and the figure dimension. The white box is used to pack during product.注意:樣品使用的小白盒尺寸可能與此圖面尺寸不同,此圖面尺寸是用于生產時的包裝.

Length: 110

Height: 60Width: 85


Label: 1

Label: 2

RoHS24

6

Material:A卡400磅(0.53t)White

印刷于此

Open Side

Height

Length

Width

Label: 2Label: 1

P/N:25HK-AJ-120A200-CP-SA 24

6

Page 10 of 12


18.2 Carton

UNIT: mm


MODEL NO. :

18. PACKING

PART NO. : PAGE NO. :ISSUED DATE:REV: (A4)

2014.02.099 OF 11HK-AJ-120A200-CP

HKSC-111296

200V~240V

100V~240V

100V~120V

Q'TY: 60PCS

G.W.:

N.W.:

MODEL:

100V~120V

200V~240V

100V~240V

(Transverse Plane)

340

310

350


Page 11 of 12


19. MARKING

UNIT: mm



PAGE NO. :

REV: (A4)ISSUED DATE: 2014.02.09

10 OF 11HK-AJ-120A200-CP

HKSC-111296

made in China by Hon-kwang

month

M M Y Y C

year


200# CPC 合成紙+上光 NAME-PLATE:WHITE CHARACTERS BLACK BACKGROUND.

輸入事業者

100V 50/60Hz 0.8A 50VA出力: 12V 2.0A

JET

入力: E

SP

LPS

60YM E202402

I.T.E POWER SUPPLY

INPUTOUTPUT

MODEL: 100-240V 50/60Hz 0.8A: 12V 2.0A

: HK-AJ-120A200-CP

MADE IN CHINA MMYYC

31.8+0.0-0.2

BS EN 60950-1TUVRheinland Group

2.5

2.5

19.8+0.0-0.2

R2.0

ID 0000019930

Sicherheitgeprufte

TUVRheinlandR

www.tuv.com

ĽINTÉRIEUR SEULEMENTATTENTION POUR UTILISATION À

Page 12 of 12

ext. psu specification for approval€¦ · 1.更新新的ip logo ... i.t.e power supply model no....

Documents