7/27/2019 Extraction of Essential Oil - Low Pressure

1/2

Best tool for the extraction of essential oil and hydrolat

Fuelsaving!Watersaving!Timesaving!

The electrical low-pressuresteam stillstill

consumes 220V (options of 3000W, 5000W

and 8000W) electricity to generate steam

with heated pressure, and the steam is

conveyed to the bottom of distillation still.

The distillation stillstill adopts twolayers of steam for re-use and extraction

of approximately 1.2 L per degree of

electricity consumption.

The coolant is made with 304# softsteel with the density absolutely free from

the erosion of essential oil.

This product has been insured against Product Liability at NTD 10 millions.

80l

7/27/2019 Extraction of Essential Oil - Low Pressure

2/2

Cooling bucket

Extraction outlet

Energy conservation cover

Level needle

Pressure gauge

Temperature meter

Water inlet

Oil/Waterseparator

Sieve

Pre-set sieve rack

Steam inlet

220V5000W

220V3000W

56cm

83cm

40cm

The coolant is in W shape embedded

with 0.1 m/m resilient steel. The coolingspeed is similar to steel and aluminum.

Illustration of cooling:

1. Steam indicates

insucient cooling.

2.White smoke indicates

burnt material.3. Normal air intake

The coolant and stillrequire no clip andrubber, yet permanentseal withoutmalfuctioning isensured.

Gas release valve(Water addition valve)

Product bucket

(Not provided)

Soft water only

Best tool for the extraction of essential oil and hydrolat

80l

Example 1 Dry Lemongrass32 kg of fresh Lemongrass (approximately 160 L

in volume) under the sun over mid-day Weightreduced to 16 kg after exposure to sunlight (

approximately 80 L in volume)

Time ElectricalpowerElectricity

consumption Remark

150minutes 8000 w 17

Extractant starts to fow

Essential oil Hydrolat

82 cc 20 L

An average of 2.5 cc (essential oil) extracted per 1

kg of raw material.

Example 3 Fresh Tea tree14.5 kg of fresh branches and leaves from the

Australian Lemongrass tea tree

Time ElectricalpowerElectricity

consumption Remark

150minutes 8000 w 17

Extractant starts to fow

Essential oil Hydrolat

160 cc 20 L

An average of 11.1 cc (essential oil) extracted per 1

kg of raw material.

Example 2 Fresh Lemongrass16 kg of fresh Lemongrass (approximately 80 L in

volume)

Time ElectricalpowerElectricity

consumption Remark

150minutes 8000 w 17

Extractant starts to fow

Essential oil Hydrolat

71 cc 20 L

An average of 4.4 cc (essential oil) extracted per 1

kg of raw material.