extreme contrast photo effect

7/27/2019 Extreme Contrast Photo Effect

1/14

Extreme Contrast Photo Effect

Step 1: Duplicate The Background LayerThe first thing were going to do is duplicate our Background layer. We can see in the Layers palette that we only have one

layer at the moment, which is the Background layer, and it contains our original image:

Photoshops Layers palette showing the original image on the Background layer.

Were going to duplicate it, and for that, we can use the keyboard shortcut Ctrl+J (Win) / Command+J (Mac). We now have a

copy of the layer above the Background layer which Photoshop has named Layer 1:

The Layers palette now shows the duplicate of the Background layer, named Layer 1, above the

original.

Step 2: Desaturate The New LayerWere going to quickly remove the colors from our new layer to create a black and white version of the image. To do that, use

the keyboard shortcut Shift+Ctrl+U (Win) / Shift+Command+U (Mac). The image will now appear in black and white in the

Document Window:
http://www.photoshopessentials.com/photo-effects/extreme-contrast/http://www.photoshopessentials.com/photo-effects/extreme-contrast/http://www.photoshopessentials.com/photo-effects/extreme-contrast/http://www.photoshopessentials.com/photo-effects/extreme-contrast/


2/14

After desaturating Layer 1, the image appears black and white.

Step 3: Duplicate The Desaturated LayerWith Layer 1 selected in the Layers palette, pressCtrl+J (Win) / Command+J(Mac) to duplicate it, so well now have two

black and white layers in the Layers palette:

We now have three layers in the Layers palette.

Step 4:Change The Blend Mode Of The New Layer To ScreenAnd Lower The Opacity To 50%With Layer 1 copy selected, go up to thelayer blend modeoptions in the top left of the Layers palette. Were going to change

the blend mode of this layer from Normal to Screen so that the image appears lighter. To do that, click on the down-pointing

arrow to the right of the word Normal and selectScreen from the list:


3/14

Change the blend mode of the top layer from Normal to Screen to lighten it. Once youve changed the blend mode, move over to theOpacity option in the top right of the Layers palette and lower the

opacity of the layer to 50% to reduce the brightness:

Lower the opacity of the layer to 50% after changing its blend mode to reduce the brightness.

Heres my image after changing the blend mode to Screen and lowering the opacity:


4/14

The image after changing the blend mode and lowering the opacity.

Step 5: Duplicate The Original Background Layer And Move ItTo The Top Of The Layers PaletteClick back on the original Background layer (the bottom layer) in the Layers palette to select it. Then press Ctrl+J(Win)

/ Command+J (Mac) to create another copy of it, which will appear directly above it. This time, Photoshop has named the new

layer Background copy:

Click on the Background layer to select it, then press Ctrl+J (Win) / Command+J (Mac) to make

another copy of it.


5/14

Currently, the new Background copy layer is below the two black and white layers, but we need it to be above them. Moving

the layer is easy. Just use the keyboard shortcut Shift+Ctrl+] / Shift+Command+] to quickly jump the layer to the top of the

layer stack:

With the Background copy layer selected, press Shift+Ctrl+] (Win) / Shift+Command+] (Mac) to

jump the layer to the top of the Layers palette.

Step 6:Change The Layers Blend Mode To Either "Overlay" Or"Color Burn"With the "Background copy" layer still selected at the top of the Layers palette, go back to the layer blend mode options and

change its blend mode to eitherOverlay orColor Burn. Depending on the image youre using, one of these two blend modes

will make the image look either too bright or too dark, so use the one that looks best. Im using Overlay for my image, since

Color Burn makes it too dark:


6/14

Change the blend mode of the Background copy layer to either Overlay or Color Burn depending

on your image.

You may find, after changing the blend mode, that the color in your image is now too strong, so lower the opacity of the layer a

little to reduce some of the color saturation if needed. Im going to lower mine to about 75%:

Change the blend mode of the Background copy layer to either Overlay or Color Burn depending

on your image.

Again, it will depend on your image and what you think looks best.

Heres my image at this point:

The image after changing the blend mode to Overlay and lowering the opacity to 75%.


7/14

With the Background copy layer still selected, pressShift+Ctrl+Alt+E (Win) / Shift+Command+Option+E (Mac) to merge all

the layers onto a brand new layer at the top of the Layers palette, which Photoshop has named Layer 2:

Merge all the layers onto a new layer at the top of the Layers palette.

Step 8: Add Noise To The Merged LayerWith the merged layer selected, go up to the Filter menu at the top of the screen, select Noise, and then selectAdd Noise. This

brings up Photoshops Add Noise filter dialog box:

Go to Filter > Noise > Add Noise to bring up the Add Noise dialog box.


8/14

When the dialog box appears, enter an Amount value of somewhere between 2-5% depending on the resolution of your image.

Im using a low resolution image for this tutorial, so Ive set mine to 2%. If youre using a higher resolution image, which you

probably are, set it closer to 5%. Set the Distribution option to Gaussian, and make sure the Monochromatic option at the

bottom is checked so we dont end up with color noise. Click OK to apply the noise and exit out of the dialog box.

Heres my image after applying noise:

The image after applying noise.

Step 9: Sharpen The Image To Enhance The NoiseNormally when working on images in Photoshop, we do everything we can to reduce or remove noise, but for this effect, we

want to enhance it, and we can do that by sharpening the image. Go up to the Filter menu once again, this time

choose Sharpen and then choose Smart Sharpen. This brings up the Smart Sharpen dialog box:


9/14

Go to Filter > Sharpen > Smart Sharpen to sharpen the image and enhance the noise.

When the dialog box appears, enter an Amount value of somewhere around 55-60%, a Radius value of1 pixel, set

the Remove option to Lens Blur, and finally, make sure More Accurate is checked at the bottom. Then click OK to exit out of the

dialog box and apply the sharpening.

If youre using a version of Photoshop prior to CS2, you can use the Unsharp Mask filter instead by going up to theFilter

menu, choosing Sharpen, and then choosing Unsharp Mask. Enter an Amount value of around 150%, a Radius value of1

pixel and a Threshold value of0.

Heres my image after applying the sharpening using Smart Sharpen:

The image after sharpening and enhancing the noise.


10/14

Step 10:Add A Curves Adjustment Layer And Set Its BlendMode To MultiplyThe main effect is finished at this point, but were just going to darken the edges a bit to enhance it even further. Click on

the New Adjustment Layer icon at the bottom of the Layers palette:

With Layer 2 selected at the top of the Layers palette, click the New Adjustment Layer icon at the

bottom.

Then select Curves from the list:

Select Curves from the list of Photoshops Adjustment Layers.

When the Curves dialog box appears, simply click OK to exit out of it. We dont need to make any changes. All we need is the

Curves adjustment layer itself in the Layers palette, which were going to use to darken the image. To do that, go up to the

blend mode options at the top of the Layers palette once again and change the blend mode for the Curves layer from Normal

to Multiply:


11/14

Change the blend mode of the Curves adjustment layer to Multiply.

As soon as you change the blend mode, your image will appear darker:

Changing the blend mode of the Curves layer to Multiply causes the image to darken.

Step 11: Drag Out A Large Oval Selection Inside The ImageGrab the Elliptical Marquee toolfrom the Tools palette (its hiding behind the Rectangular Marquee tool by default) and drag out

a large oval selection inside the document, making it so large that the edges extend out past the left and right of the image:


12/14

Use the Elliptical Marquee tool to drag out a large oval selection, extending it out beyond the left and

right sides of the image.

Step 12: Fill The Selection With Black On The CurveAdjustments Layer MaskWith the Curves adjustment layer still selected, press D on your keyboard to reset your Foreground and Background colors.

Normally this would result in your Foreground color being black and your Background color being white, but because the layer

maskon the Curves adjustment layer is currently selected (you can see that it has a highlight border around it to indicate that

its selected), we get the exact opposite. White becomes your Foreground color and black becomes your Background color

whenever you reset your colors with a layer mask selected.

So with black as your Background color and the Curves adjustment layer selected in the Layers palette, use the keyboard

shortcut Ctrl+Backspace (Win) / Command+Delete(Mac) to fill the selection with black. Youre not covering the image itself with

black. Instead, youre filling the area on the Curve adjustments layer mask with bla ck, which will cause the Curves adjustment

to be hidden inside the area you selected, allowing the original lighter version of the image below it to show through. Only the

corners of the image remain darker:


13/14

After filling the selection with black on the Curve adjustments layer mask, only the corner edges

remain darker.

Step 13:Soften The Edges With The Gaussian Blur FilterAll thats left to do now is to soften the transition between the lighter image in the centerand the darker edges in the corners,

and we can do that with the Gaussian Blur filter. Go up to theFilter menu, choose Blur, and then choose Gaussian Blur to

bring up the Gaussian Blur dialog box:

Go to Filter > Blur > Gaussian Blur to bring up Photoshops Gaussian Blur filter.

As I mentioned, Im using a low resolution image for this tutorial, so for me, aRadius value of about 50 pixels blurs the edges

out nicely. If youre using a high resolution image, youll probably want to use a setting of150 pixels or higher. The idea is simply


14/14

to blur out the edges so they transition nicely from darker in the corners to lighter as you move towards the center of the image.

Keep an eye on the image itself to see a preview of the blurring effect as youre dragging the slider bar at the bottom.

When youre happy with the blur amount, click OK to exit out of the Gaussian Blur dialog box, and youre done!

Here once again is my original image:

The original image.

And here is the finished extreme contrast effect:

The final result.

And there we have it!

extreme contrast photo effect

Documents