Product Photos:

Silver

Pink

Black

Blue Violet

Extreme

Stainless

Steel Travel

Mug

(Vacuum

Insulated) -

16 oz. Stainless Steel Travel Mugs

from Contigo®

The Extreme Mug is the

ultimate on-the-go coffee

companion. The

Extreme Stainless Steel

Travel Mug is perfect

for a road warrior's

Monday morning

commute, or the outdoor

enthusiast's latest

adventure. The stylishly

rugged features aren't

just for good looks

though - they combine

into a travel mug that

really can go anywhere,

anytime.

The Extreme Travel

Mug is a double-wall

stainless steel mug with

vacuum insulation,

ensuring that your hot

coffee or other hot or

cold beverages stay that

way for hours.

Benefits:

Patented pull-tab

lid makes this

travel mug 100%

leak-proof.

Vacuum-

insulated

technology means

that this stainless

steel mug keeps

beverages hot for

4 hours, and cold

for 12 hours.

Patented

carabiner clip on

the handle allows

you to take this

travel mug

wherever you go.

Attach it to a bag

strap for hands-

free portability.

Textured grips

make

the Extreme

Mug easy to

carry and hold.

Will hold up to

16 oz. of your

favorite beverage

and fits most

standard car

cupholders.

Constructed with

a double wall and

stainless steel inside and out for

maximum

performance.

Does not contain

rubber or latex.

Made from

100% FDA-

approved

materials.

Volume: 16 oz.

Dimensions: 5" at

widest point, including

handle, x 8.1"H x 2.9"

diameter at base

AUTOSEAL® Aria Stainless Steel Travel Mug

WARNING:

Careful. The beverage you are about to enjoy is very hot. For best results always

use caution.

Always press the AUTOSEAL® button when the tumbler is in the upright position

prior to lifting it to drink. This will release any built-up pressure. Release button to

seal mug.

Keep out of reach of children when filled with hot liquids.

Prior to drinking, check to ensure the lid is properly threaded to body and screwed

down 100%. Button should be depressed to release pressure each time the lid is

screwed on.

If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before

sealing with the lid.

Coffee brewed below boiling temperatures can be poured directly from coffee

makers into the mug without waiting for liquid to cool down.

Avoid accidental depressing of button by sliding the button down to lock, exposing

the red "locked" area above the button.

Do not overfill. Fill liquids to just below the threading in the body.

Do not microwave and do not freeze.

Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh

chemicals.

USAGE RECOMMENDATIONS:

Suitable for hot and cold beverages.

To screw the lid on easily and safely place lid on top of mug. Apply slight

downward pressure and rotate counter-clockwise until you hear a click and lid falls

into place. Proceed to rotate lid clockwise to tighten down.

The AUTOSEAL® lid that came with your new purchase is designed to only fit your

new Contigo® mug. Not for use with other products.

AUTOSEAL® lid is designed to help prevent spills from accidental tipping.

Following your purchase, wash all parts with hot soapy water before use. Rinse

thoroughly and dry. Always store with lid removed to allow parts to dry

completely. Travel mug and lid are top-rack dishwasher safe.

LID CLEANING TIPS:

Always rinse the lid immediately after each use. Store with lid removed to allow

parts to dry completely.

Rinse drink spout and lid vent immediately after use, prior to putting into the

dishwasher:

1. Turn lid so the underside is facing up and fill lid with hot soapy

water.

2. Tilt the lid back and forth first towards the drink spout and then

towards the button while pressing the button to allow the soapy water to rinse

through both the drink spout and the vent hole.

3. Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:

To clean the top of the lid:

1. Use a non-abrasive sponge or brush head/swab to clean the drink

spout in the open and closed position.

2. Rinse while pressing the button to allow the soapy water to rinse

through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy

water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a

cotton swab can be used to clean the inside of the

AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with

hot soapy water. Run brush head or swab along the

following areas to ensure complete cleaning:

1. Underneath and along both sides of the center plastic piece of the

lid. Reference "A" and "C" below.

2. Along both the inner and outer walls of the threading. Reference "B"

below.

3. The underside of the spout. Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse

through the drink spout.

Click to view General Care & Use Instructions (all products)

AUTOSEAL® Bella Double Wall Insulated Mug

WARNING:

Careful. The beverage you are about to enjoy is very hot. For best results always use

caution.

Always press the AUTOSEAL® button when the tumbler is in the upright position prior

to lifting it to drink. This will release any built-up pressure. Release button to seal

mug.

Keep out of reach of children when filled with hot liquids.

Prior to drinking, check to ensure the lid is properly threaded to body and screwed

down 100%. Button should be depressed to release pressure each time the lid is

screwed on.

If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before

sealing with the lid.

Coffee brewed below boiling temperatures can be poured directly from coffee makers

into the mug without waiting for liquid to cool down.

Avoid accidental depressing of button by keeping button free and clear of other objects.

Do not overfill. Fill liquids to just below the threading in the body.

Do not microwave and do not freeze.

Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh

chemicals.

USAGE RECOMMENDATIONS:

Suitable for hot and cold beverages.

To screw the lid on easily and safely place lid on top of mug. Apply slight downward

pressure and rotate counter-clockwise until you hear a click and lid falls into

place. Proceed to rotate lid clockwise to tighten down.

The AUTOSEAL® lid that came with your new purchase is designed to only fit your

new Contigo® mug. Not for use with other products.

AUTOSEAL® lid is designed to help prevent spills from accidental tipping.

Following your purchase, wash all parts with hot soapy water before use. Rinse

thoroughly and dry. Always store with lid removed to allow parts to dry completely.

Travel mug and lid are top-rack dishwasher safe.

LID CLEANING TIPS:

Always rinse the lid immediately after each use. Store with lid removed to allow

parts to dry completely.

Rinse drink spout and lid vent immediately after use, prior to putting into the

dishwasher:

1. Turn lid so the underside is facing up and fill lid with hot soapy water.

2. Tilt the lid back and forth first towards the drink spout and then towards

the button while pressing the button to allow the soapy water to rinse

through both the drink spout and the vent hole.

3. Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:

To clean the top of the lid:

1. Use a non-abrasive sponge or brush head/swab to clean the drink spout

in the open and closed position.

2. Rinse while pressing the button to allow the soapy water to rinse

through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy

water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a

cotton swab can be used to clean the inside of the

AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with

hot soapy water. Run brush head or swab along the

following areas to ensure complete cleaning:

1. Underneath and along both sides of the center plastic piece of the

lid. Reference "A" and "C" below.

2. Along both the inner and outer walls of the threading. Reference "B"

below.

3. The underside of the spout. Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through

the drink spout.

Click to view General Care & Use Instructions (all products)

AUTOSEAL® Elite Stainless Steel Travel Mug (sold only at QVC)

WARNING:

Careful. The beverage you are about to enjoy is very hot. For best results always use

caution.

Always press the AUTOSEAL® button when the tumbler is in the upright position prior

to lifting it to drink. This will release any built-up pressure. Release button to seal

mug.

Keep out of reach of children when filled with hot liquids.

Prior to drinking, check to ensure the lid is properly threaded to body and screwed

down 100%. Button should be depressed to release pressure each time the lid is

screwed on.

If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before

sealing with the lid.

Coffee brewed below boiling temperatures can be poured directly from coffee makers

into the mug without waiting for liquid to cool down.

Avoid accidental depressing of button by keeping button free and clear of other objects.

Do not overfill. Fill liquids to just below the threading in the body.

Do not microwave and do not freeze.

Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh

chemicals.

USAGE RECOMMENDATIONS:

Suitable for hot and cold beverages.

To screw the lid on easily and safely place lid on top of mug. Apply slight downward

pressure and rotate counter-clockwise until you hear a click and lid falls into

place. Proceed to rotate lid clockwise to tighten down.

The AUTOSEAL® lid that came with your new purchase is designed to only fit your

new Contigo® mug. Not for use with other products.

AUTOSEAL® lid is designed to help prevent spills from accidental tipping.

Following your purchase, wash all parts with hot soapy water before use. Rinse

thoroughly and dry. Always store with lid removed to allow parts to dry completely.

Lid is top-rack dishwasher safe.

Hand wash mug body.

LID CLEANING TIPS:

Always rinse the lid immediately after each use. Store with lid removed to allow

parts to dry completely.

Rinse drink spout and lid vent immediately after use, prior to putting into the

dishwasher:

1. Turn lid so the underside is facing up and fill lid with hot soapy water.

2. Tilt the lid back and forth first towards the drink spout and then towards

the button while pressing the button to allow the soapy water to rinse

through both the drink spout and the vent hole.

3. Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:

To clean the top of the lid:

1. Use a non-abrasive sponge or brush head/swab to clean the drink spout

in the open and closed position.

2. Rinse while pressing the button to allow the soapy water to rinse

through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy

water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a

cotton swab can be used to clean the inside of the

AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with

hot soapy water. Run brush head or swab along the

following areas to ensure complete cleaning:

1. Underneath and along both sides of the center plastic piece of the

lid. Reference "A" and "C" below.

2. Along both the inner and outer walls of the threading. Reference "B"

below.

3. The underside of the spout. Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through

the drink spout.

Click to view General Care & Use Instructions (all products)

AUTOSEAL® Elle Double Wall Insulated Mug

WARNING:

Careful. The beverage you are about to enjoy is very hot. For best results always use

caution.

Always press the AUTOSEAL® button when the tumbler is in the upright position prior

to lifting it to drink. This will release any built-up pressure. Release button to seal

mug.

Keep out of reach of children when filled with hot liquids.

Prior to drinking, check to ensure the lid is properly threaded to body and screwed

down 100%. Button should be depressed to release pressure each time the lid is

screwed on.

If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before

sealing with the lid.

Coffee brewed below boiling temperatures can be poured directly from coffee makers

into the mug without waiting for liquid to cool down.

Avoid accidental depressing of button by keeping button free and clear of other objects.

Do not overfill. Fill liquids to just below the threading in the body.

Do not microwave and do not freeze.

Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh

chemicals.

USAGE RECOMMENDATIONS:

Suitable for hot and cold beverages.

To screw the lid on easily and safely place lid on top of mug. Apply slight downward

pressure and rotate counter-clockwise until you hear a click and lid falls into

place. Proceed to rotate lid clockwise to tighten down.

The AUTOSEAL® lid that came with your new purchase is designed to only fit your

new Contigo® mug. Not for use with other products.

AUTOSEAL® lid is designed to help prevent spills from accidental tipping.

Following your purchase, wash all parts with hot soapy water before use. Rinse

thoroughly and dry. Always store with lid removed to allow parts to dry completely.

Lid is top-rack dishwasher safe.

Hand wash travel mug body.

LID CLEANING TIPS:

Always rinse the lid immediately after each use. Store with lid removed to allow

parts to dry completely.

Rinse drink spout and lid vent immediately after use, prior to putting into the

dishwasher:

1. Turn lid so the underside is facing up and fill lid with hot soapy water.

2. Tilt the lid back and forth first towards the drink spout and then towards

the button while pressing the button to allow the soapy water to rinse

through both the drink spout and the vent hole.

3. Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:

To clean the top of the lid:

1. Use a non-abrasive sponge or brush head/swab to clean the drink spout

in the open and closed position.

2. Rinse while pressing the button to allow the soapy water to rinse

through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy

water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a

cotton swab can be used to clean the inside of the

AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with

hot soapy water. Run brush head or swab along the

following areas to ensure complete cleaning:

1. Underneath and along both sides of the center plastic piece of the

lid. Reference "A" and "C" below.

2. Along both the inner and outer walls of the threading. Reference "B"

below.

3. The underside of the spout. Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through

the drink spout.

Click to view General Care & Use Instructions (all products)

AUTOSEAL® Sport Stainless Steel Travel Mug

WARNING:

Careful. The beverage you are about to enjoy is very hot. For best results always use

caution.

Always press the AUTOSEAL® button when the tumbler is in the upright position prior

to lifting it to drink. This will release any built-up pressure. Release button to seal

mug.

Keep out of reach of children when filled with hot liquids.

Prior to drinking, check to ensure the lid is properly threaded to body and screwed

down 100%. Button should be depressed to release pressure each time the lid is

screwed on.

If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before

sealing with the lid.

Coffee brewed below boiling temperatures can be poured directly from coffee makers

into the mug without waiting for liquid to cool down.

Avoid accidental depressing of button by keeping button free and clear of other objects.

Do not overfill. Fill liquids to just below the threading in the body.

Do not microwave and do not freeze.

Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh

chemicals.

USAGE RECOMMENDATIONS:

Suitable for hot and cold beverages.

To screw the lid on easily and safely place lid on top of mug. Apply slight downward

pressure and rotate counter-clockwise until you hear a click and lid falls into

place. Proceed to rotate lid clockwise to tighten down.

The AUTOSEAL® lid that came with your new purchase is designed to only fit your

new Contigo® mug. Not for use with other products.

AUTOSEAL® lid is designed to help prevent spills from accidental tipping.

Following your purchase, wash all parts with hot soapy water before use. Rinse

thoroughly and dry. Always store with lid removed to allow parts to dry completely.

Travel mug and lid are top-rack dishwasher safe.

LID CLEANING TIPS:

Always rinse the lid immediately after each use. Store with lid removed to allow

parts to dry completely.

Rinse drink spout and lid vent immediately after use, prior to putting into the

dishwasher:

1. Turn lid so the underside is facing up and fill lid with hot soapy water.

2. Tilt the lid back and forth first towards the drink spout and then towards

the button while pressing the button to allow the soapy water to rinse

through both the drink spout and the vent hole.

3. Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:

To clean the top of the lid:

1. Use a non-abrasive sponge or brush head/swab to clean the drink spout

in the open and closed position.

2. Rinse while pressing the button to allow the soapy water to rinse

through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy

water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a

cotton swab can be used to clean the inside of the

AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with

hot soapy water. Run brush head or swab along the

following areas to ensure complete cleaning:

1. Underneath and along both sides of the center plastic piece of the

lid. Reference "A" and "C" below.

2. Along both the inner and outer walls of the threading. Reference "B"

below.

3. The underside of the spout. Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through

the drink spout.

Click to view General Care & Use Instructions (all products)

AUTOSEAL® West Loop Stainless Steel Travel Mug - 16 oz.

WARNING:

Careful. The beverage you are about to enjoy is very hot. For best results always use

caution.

Always press the AUTOSEAL® button when the tumbler is in the upright position prior

to lifting it to drink. This will release any built-up pressure. Release button to seal

mug.

Keep out of reach of children when filled with hot liquids.

Prior to drinking, check to ensure the lid is properly threaded to body and screwed

down 100%. Button should be depressed to release pressure each time the lid is

screwed on.

If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before

sealing with the lid.

Coffee brewed below boiling temperatures can be poured directly from coffee makers

into the mug without waiting for liquid to cool down.

Avoid accidental depressing of button by keeping button free and clear of other objects.

Do not overfill. Fill liquids to just below the threading in the body.

Do not microwave and do not freeze.

Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh

chemicals.

USAGE RECOMMENDATIONS:

Suitable for hot and cold beverages.

To screw the lid on easily and safely place lid on top of mug. Apply slight downward

pressure and rotate counter-clockwise until you hear a click and lid falls into

place. Proceed to rotate lid clockwise to tighten down.

The AUTOSEAL® lid that came with your new purchase is designed to only fit your

new Contigo® mug. Not for use with other products.

AUTOSEAL® lid is designed to help prevent spills from accidental tipping.

Following your purchase, wash all parts with hot soapy water before use. Rinse

thoroughly and dry. Always store with lid removed to allow parts to dry completely.

All lids are top-rack dishwasher safe.

If you have purchased a mug that has a brushed stainless steel body (not

colored/painted body), the body is top-rack dishwasher safe.

If you have purchased a mug that has a COLORED/PAINTED body, it is

recommended that the body be hand washed.

LID CLEANING TIPS:

Always rinse the lid immediately after each use. Store with lid removed to allow

parts to dry completely.

Rinse drink spout and lid vent immediately after use, prior to putting into the

dishwasher:

1. Turn lid so the underside is facing up and fill lid with hot soapy water.

2. Tilt the lid back and forth first towards the drink spout and then towards

the button while pressing the button to allow the soapy water to rinse

through both the drink spout and the vent hole.

3. Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:

To clean the top of the lid:

1. Use a non-abrasive sponge or brush head/swab to clean the drink spout

in the open and closed position.

2. Rinse while pressing the button to allow the soapy water to rinse

through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy

water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a

cotton swab can be used to clean the inside of the

AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with

hot soapy water. Run brush head or swab along the

following areas to ensure complete cleaning:

1. Underneath and along both sides of the center plastic piece of the

lid. Reference "A" and "C" below.

2. Along both the inner and outer walls of the threading. Reference "B"

below.

3. The underside of the spout. Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through

the drink spout.

Click to view General Care & Use Instructions (all products)

AUTOSEAL® West Loop Stainless Steel Travel Mug - 20 oz.

WARNING:

Careful. The beverage you are about to enjoy is very hot. For best results always use

caution.

Always press the AUTOSEAL® button when the tumbler is in the upright position prior

to lifting it to drink. This will release any built-up pressure. Release button to seal

mug.

Keep out of reach of children when filled with hot liquids.

Prior to drinking, check to ensure the lid is properly threaded to body and screwed

down 100%. Button should be depressed to release pressure each time the lid is

screwed on.

If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before

sealing with the lid.

Coffee brewed below boiling temperatures can be poured directly from coffee makers

into the mug without waiting for liquid to cool down.

Avoid accidental depressing of button by keeping button free and clear of other objects.

Do not overfill. Fill liquids to just below the threading in the body.

Do not microwave and do not freeze.

Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh

chemicals.

USAGE RECOMMENDATIONS:

Suitable for hot and cold beverages.

To screw the lid on easily and safely place lid on top of mug. Apply slight downward

pressure and rotate counter-clockwise until you hear a click and lid falls into

place. Proceed to rotate lid clockwise to tighten down.

The AUTOSEAL® lid that came with your new purchase is designed to only fit your

new Contigo® mug. Not for use with other products.

AUTOSEAL® lid is designed to help prevent spills from accidental tipping.

Following your purchase, wash all parts with hot soapy water before use. Rinse

thoroughly and dry. Always store with lid removed to allow parts to dry completely.

Lid is top-rack dishwasher safe.

Hand wash mug body.

LID CLEANING TIPS:

Always rinse the lid immediately after each use. Store with lid removed to allow

parts to dry completely.

Rinse drink spout and lid vent immediately after use, prior to putting into the

dishwasher:

1. Turn lid so the underside is facing up and fill lid with hot soapy water.

2. Tilt the lid back and forth first towards the drink spout and then towards

the button while pressing the button to allow the soapy water to rinse

through both the drink spout and the vent hole.

3. Repeat 1 and 2 a few times for best results.

Additional Cleaning Tips:

To clean the top of the lid:

1. Use a non-abrasive sponge or brush head/swab to clean the drink spout

in the open and closed position.

2. Rinse while pressing the button to allow the soapy water to rinse

through the drink spout.

Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy

water.

If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a

cotton swab can be used to clean the inside of the

AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with

hot soapy water. Run brush head or swab along the

following areas to ensure complete cleaning:

1. Underneath and along both sides of the center plastic piece of the

lid. Reference "A" and "C" below.

2. Along both the inner and outer walls of the threading. Reference "B"

below.

3. The underside of the spout. Reference "D" below.

Rinse repeatedly while pressing the button to allow the soapy water to rinse through

the drink spout.

Click to view General Care & Use Instructions (all products)

Extreme Stainless Steel Travel Mug

Careful. The beverage you are about to enjoy is very hot. For best results always use

caution.

The sealing lid is only designed to fit your Contigo® mug. Not for use with other

products.

Sealing lid is designed to help prevent spills from accidental tipping.

Product can be used for both hot and cold liquids.

Hand wash all parts with hot soapy water before use. Clean with lid in the open

position. Rinse thoroughly and dry. Always store with lid removed.

The lid closure tab should be in the open position when securing lid onto mug or when

removing lid. Prior to drinking check to ensure the lid is secured tightly.

Lid can be positioned for right- or left-handed drinkers.

Lid is top-rack dishwasher safe. Body of the mug is hand wash only.

Not recommended for carbonated beverages.

CAUTION:

Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh

chemicals.

Do not microwave and do not freeze.

Do not overfill. Fill liquids to just below the lid threading. Hot liquids can burn user.

Do not fill with boiling liquids. Liquid temperatures should be 90 degrees C or less to

avoid burning.

Keep out of reach of children when filled with hot liquids.