extruded brackets - for 3 slots post-assembly insertion easy … · 2019. 7. 8. · 60 cbm5-10 6...
TRANSCRIPT
-5432 -5442
Extruded Brackets - For 3 SlotsFor 5 Series (Slot Width 6mm) Aluminum Extrusions
Type M Material S Surface TreatmentNBLTT5 A6063S-T5
Clear AnodizeEHBLTT5 A6N01SS-T5
5 Series6 60
QThick Brackets
QFeatures: Extrusions with 3 slots (HFS5-2060, etc.) can be connected with one bracket.
Ø4.2
6-Ø5.5
54
20
720
7
12 2535
12
25
35
5
NBLTT5HBLTT5
E�Both sides and screw holes of NBLTT5 is not anodized.
M Material: A6N01SS-T5 S Surface Treatment: Clear Anodize
Part Number
Mass (g)
Applicable Screw, T Nut Allowable Load (N)
Unit Price Volume Discount Rate
Screw Quantity T Nut Quantity 1~99 pc(s). 100~200NBLTT5
60 CBM5-10 6 HNTT5-5 6 1960HBLTT5
Ø4.2
12-Ø5.5
3012
5750
12
30
57
7
720
2054
5 20
HBLTTW5QThick Brackets
QFeatures: Brackets for 3-slot extrusions with 6 mounting holes on one side can connect extrusions more securely.
Part Number
Mass (g)
Applicable Screw, T Nut Allowable Load (N)
Unit Price Volume Discount Rate
Screw Quantity T Nut Quantity 1~99 pc(s). 100~200HBLUT5 119 CBM5-14 6 HNTT5-5 6 1960
Part NumberHBLTT5
Part Number
Mass (g)
Applicable Screw, T Nut Allowable Load (N)
Unit Price Volume Discount Rate
Screw Quantity T Nut Quantity 1~99 pc(s). 100~200HBLTTW5 96 CBM5-10 12 HNTT5-5 12 2940
Part Number - (C, SET, SST, SEU, SSU, SEP, SSP, SEC)
HBLTT5 - SET
Alterations Code Spec. Applicable Bracket
Mounting Hole
Alteration for Cover
C
Adds taps on a bracket for cover mounting. (M5 on Both Sides, Depth 15mm)(Mounting Screw HCBM on P.754)
HBLTT5
HBLUT5
HBLTTW5
EIncluded Screw is not RoHS compliant when -SET, -SEU or -SEP are specified.
Alterations Code Spec. Applicable Bracket
Applicable Screws and
Nuts Set
SETSST
(Stainless Steel)SEU
Pre-Assembly Insertion Spring Nuts
SSUPre-Assembly
Insertion Spring Nuts Stainless SteelSEP
Post-Assembly Insertion Spring NutsSSP
Post-Assembly Insertion Spring Nuts
Stainless SteelSECScrews with
Captured Washer and Nuts
Applicable screws and nuts for f ixing the brackets on extrusions come in a set. (Adds to the bracket price.)
NBLTT5
HBLTT5
HBLUT5
HBLTTW5( )
( )
( )( )
( )
(Ex.) When HBLTT5 is specified:Code Screw NutSET CBM5-10 HNTT5-5SST SCB5-10 HNTTBS5-5SEU CBM5-10 HNTU5-5SSU SCB5-10 SHNTU5-5SEP CBM5-10 HNTP5-5SSP SCB5-10 SHNTP5-5SEC HCBST5-12 HNTT5-5E�When specifying other than
HBLTT5, check for the applicable screws and nuts.
2020
7
7
54
9
5141
12
12
41
51
6-Ø5.5
Ø4.2
HBLUT5QUltra Thick Brackets
QFeatures: Numbers of screws are the same as those of HBLTT5. Extrusions can be connected more securely.
Post-Assembly Insertion Easy BracketsFor 5 Series (Slot Width 6mm) Aluminum Extrusions
Holes are tapped on a bracket for cover mounting.
For aluminum extrusions with 2 slots, brackets can be mounted on both sides.
5 Series6 20 • 25 • 40
QFeatures: 2 aluminum extrusions can be easily connected with only 1 tightening screw. Brackets can be mounted on the extrusion slots after assembly.
Q Post-Assembly Insertion Easy Brackets
1Joint Plate
1.61.6(4.1)25
12
2512
(14)
Ø6 2-Ø6
30
3020
20
(10.1)
2Joint Brackets
21728
728
21
17.5M5
6.7
M5
6.710
17.58
4
4
3Hex Socket Head Cap Screw
58
Ø8.5
M5
4
E Overtightening may cause deformation of joint plates. (Reference Tightening Torque 5.5N • m)
HABL5
Part Number
HABL5
Components M Material S Surface Treatment1Joint Plate SPCC
Trivalent Chromate2Joint Brackets S45C Equivalent3Hex Socket Head Cap Screw SCM435
Part Number Mass (g)
Included Screw Allowable Load (N)
Unit Price Volume Discount Rate
Type Screw Quantity 1~99 pc(s). 100~200
HABL5 30Hex Socket Head
Cap ScrewM5x8
1 250
Q Connection MethodStep Front View Side View Sketch Drawing
Place 2 aluminum extrusions and adjust the frame positions.
1
Fit the joint bracket 2 in the slot of the aluminum extrusions.
2
Cover the joint bracket 2 on the joint plate 1.
3
4
E Overtightening may cause deformation of joint plates.
3�Tighten a hex socket head cap screw to fix the plate. (Reference Tightening Torque 5.5N • m)
DeliveryDays to Ship
M Material: A6N01SS-T5 S Surface Treatment: Anodize