extrusion, anodising and powder coat ......10.0mm flex ht-046f 3.00m 60 12.5mm flex ht-048f 3.00m 60...

QUALITY FLOORING TRANSITIONS

2/75 Zenith Road, Dandenong, Victoria 3175, Australia.Telephone: +61 3 9793 2244 Facsimile: +61 3 9793 4488Email: [email protected]

(D = Drilled / C = Countersunk / S = Screws) Page 1

All aluminium sections are extruded to AS 1866-1997, anodized to GB 5237.2:2008 or powder coated to GB 5237.5:2008.

Mean Critical Radiant Flux (MCRF) tested to AS 9239.1.2003

BCA C1.10 2012, Table 2 lists the maximum CRF for Floor Covering Materials in different building types, (with and without a E1.5 sprinklers) and in Fire-Isolated Exists and Fire Control Rooms. BBS aluminium sections show CRF of 12.9kW/m2. BBS Luminous Contrasting Strips show a CRF of 8kW/m2.

Both measures meet the standard in all building types.

Smoke Development Rate (MSDR) tested to AS 9239.1.2003

BCA C1.10 2012, 3 (b) determines a maximum SDR of 750%-minutes in buildings not protected by a E1.5 sprinkler system. BBS aluminium sections show a CRF of 12.9kW/m2. BBS Luminous Contrasting Strips show a MSDR of 410%-minutes. Both measures meet the standard in all building types.

Refer to BCA C1.10 2012 for detailed requirements.

Mobility and Access Standards for stairnosings and transition strips in a continuous accessible path of travel are governed by AS 1428.1:2009, Design for Access and Mobility and its amendments.

The Disabilities (Access to Premise-Buildings) Standards Act of 2010 references AS 1428.1:2009 and names the types of buildings persons and actions to which the Standards apply. Refer to these standards for detailed requirements.

AS 4586:2013, Slip Resistance Classification of New Pedestrian Surface Materials governs slip ratings for pedestrian surfaces.

SA HB 198:2014 defines the tests for Floorcovering Materials:

· Wet Pendulum Test (App. A) in most locations (P0-P5).

· Oil-Wet Inclining Platform (App. D) for oil contaminated areas (R9-R13).

The minimum classifications deemed-to-satisfy building applications in the National Construction Code are:

APPLICATION DRY CONDITIONS WET CONDITIONSRamp steeper than 1:14 P4 or R11 P5 or R12

Ramp steeper than 1:20 but not steeper than 1:14 P3 or R10 P4 or R11

Tread or landing surface P3 or R10 P4 or R11

Nosing or landing edge strip P3 P4

The minimum Wet Pendulum or Oil-Wet Inclining Platform classifications for applications where the National Construction Code does not require Slip Resistance are considered to be:

WET OIL-WET INCLIN-LOCATION PENDULUM ING PLATFORM

External Pavements and RampsExternal ramps including sloping driveways, footpaths etc. steeper than 1:14 P5 R12

External ramps including sloping driveways, footpaths etc., under 1:14 P4 R11

External sales areas, carparks, colonnades, walkways, pedestrian crossings P4 R11

External balconies, verandas, carports, driveways, courtyards and roof decks P4 R11

Undercover car parks P3 R10

Hotels, Offices, Public Buildings, Schools and KindergartensEntries to hotels, offices, public buildings, schools, kindergartens, common areas of public buildings, internal lift lobbies:

WET OIL-WET INCLIN-LOCATION PENDULUM ING PLATFORMWet Area P3 R10

Transitional Area P2 R9

Dry Area P1 R9

Toilet Facilities in offices, hotels and shopping centres P3 R10

Hotel apartment bathrooms, ensuites and toilets P2 A

Hotel apartment kitchens and laundries P2 R9

Supermarkets and Shopping CentresFast food outlets, buffet food servery areas, food courts etc. P3 R10

Shop and supermarket fresh fruit and vegetable areas P3 R10

Shop entry areas with external entrances P3 R10

Supermarket aisles (except fresh fruit areas) P1 R9

Other separate shops inside shopping centres - wet P3 R10

Other separate shops inside shopping centres - dry P1 R9

Loading docks, Commercial Kitchens, Cold Stores, Serving areasLoading docks undercover and commercial kitchens P5 R12

Serving areas behind bars in public hotels and clubs, cold stores and freezers P4 R11

Swimming pools and Sporting FacilitiesSwimming pool ramps and stairs leading to water P5 C

Swimming pool surrounds and communal shower rooms P4 B

Communal changing rooms P3 A

Undercover concourse areas of sports stadiums P3 R10

Hospitals and Aged Care FacilitiesBathrooms and ensuites in hospitals and aged care facilities P3 B

Wards and corridors in hospital and aged care facilities P2 R9

Refer to AS 4586:2014 and its amendments for detailed requirements.

EXTRUSION, ANODISING AND POWDER COAT STANDARDS

DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE

ACCESS AND MOBILITY STANDARDS

SLIP RATINGS




CARPET TILE TRIMS

ALUMINIUM TILE ANGLES ALUMINIUM SKIRTINGS

4.1mm

40.63mm

8mm

0.8m

m0.

8mm

8mm

3.6mm

21.5mm

9.3mm

7.8m

m

28.1mm

26.3mm

8.3mm

2mm

7.8m

m2m

m

27m

m

6mm

9.2m

m

84mm

55mm65mm

45mm

15mm

5mm

Carpet Tile Straight RampCOLOUR CODE LENGTH LM/CTNMill Finish HT-388 3.66m 36.6

Carpet Tile to Vinyl EdgeCOLOUR CODE LENGTH LM/CTNMill Finish HT-386 3.66m 36.6

Carpet Tile Vertical FinishCOLOUR CODE LENGTH LM/CTNMill Finish HT-387 3.66m 36.6

Commercial Carpet Tile NosingCOLOUR CODE LENGTH LM/CTNMill Finish HT-226S 3.66m 36.6

Carpet Tile EdgeCOLOUR CODE LENGTH LM/CTNMill Finish HT-385 3.66m 36.6

5mm Reducing StripCOLOUR CODE LENGTH LM/CTNMill Finish HT-104 3.66m 36.6

WIDTH COLOUR CODE LENGTH LM/CTN100mm Mat Silver HT-100S 4.00m 40150mm Mat Silver HT-150S 3.60m 36

100mm

150mm

SIZE TYPE CODE LENGTH LM/CTN4.5mm Straight HT-040 3.00m 606.0mm Straight HT-042 3.00m 608.0mm Straight HT-044 3.00m 6010.0mm Straight HT-046 3.00m 6012.5mm Straight HT-048 3.00m 606.0mm Flex HT-042F 3.00m 608.0mm Flex HT-044F 3.00m 6010.0mm Flex HT-046F 3.00m 6012.5mm Flex HT-048F 3.00m 60

21 mm

Vari

ou

s




34 mm

4 mm

8 m

m

29 mm

4 mm8

mm

14 m

m

Multi-Base (Pinned)TYPE CODE LENGTH LM/CTNStraight HT-908 3.31m 66.2Straight HT-908S 0.83m 66.2Contour HT-908C 3.31m 66.2

Multi-Trim (Pinless)TYPE CODE LENGTH LM/CTNStraight HT-108 3.31m 66.2Straight HT-108S 0.83m 66.2Contour HT-108C 3.31m 66.2

Multi-Purpose ExtensionCOLOUR CODE LENGTH LM/CTNMill Finish HT-109 3.31m 33.1

COVERSTRIPS MULTI-PURPOSE

30 mm

30mm Ripple TrimCOLOUR CODE LENGTH LM/CTNMill Finish HT-156 3.31m 33BT Gold HT-156G 3.31m 33BT Bronze HT-156B 3.31m 33BT Pewter HT-156P 3.31m 33

33 mm

33mm Ripple BarCOLOUR CODE LENGTH LM/CTNMill Finish HT-400 3.31m 33BT Gold HT-400G 3.31m 33BT Bronze HT-400B 3.31m 33BT Pewter HT-400P 3.31m 33

32 mm

32mm Hammered CoverCOLOUR CODE LENGTH LM/CTNMill Finish HT-651 3.31m 33BT Gold HT-651G 3.31m 33BT Bronze HT-651B 3.31m 33BT Pewter HT-651P 3.31m 33

38 mm

38mm Commercial CoverCOLOUR CODE LENGTH LM/CTNMill Finish HT-800 3.66m 36.6

50 mm

4mm

50mm Heavy Duty Cover Strip (D/C/S)COLOUR CODE LENGTH LM/CTNMat Silver HT-106S 3.66m 36.6




38 mm

19 mm

32 mm

21 mm

48 mm

28 mm

43 mm

28 mm

40 mm

26 mm

40 mm

26 mm

35m

m

65mm

30mm

Carpet GripperCOLOUR CODE LENGTH LM/CTNMill Finish HT-723 2.50m 50

Low Profile GripperCOLOUR CODE LENGTH LM/CTNMill Finish HT-722 2.50m 50

NAPLOKS

ALUMINIUM GRIPPERS

Domestic Naplok (Pinned)COLOUR CODE LENGTH LM/CTNMill Finish HT-803 3.31m 33.1BT Gold HT-803G 3.31m 33.1BT Bronze HT-803B 3.31m 33.1BT Pewter HT-803P 3.31m 33.1

Domestic Naplok (Pinless)COLOUR CODE LENGTH LM/CTNMill Finish HT-150 3.31m 33.1

Commercial Naplok (Pinned)COLOUR CODE LENGTH LM/CTNMill Finish HT-201 3.66m 36.6BT Gold HT-201G 3.66m 36.6

Commercial Naplok (Pinless)COLOUR CODE LENGTH LM/CTNMill Finish HT-111 3.66m 36.6

Solid Brass Naplok (Pinned)MATERIAL CODE LENGTH LM/CTNBrass HT-113 3.66m 18.3

Solid Brass Naplok (Pinless)MATERIAL CODE LENGTH LM/CTNBrass HT-112 3.66m 18.3




3.0m

m(–

.0/+

.4m

m)

SIZE COLOUR CODE LENGTH LM/CTN2.0mm Mill Finish HT-103 3.66m 36.63.0mm Mill Finish HT-101 3.66m 36.63.0mm Brass HT-012 3.66m 36.65.0mm Mill Finish HT-104 3.66m 36.6

FINISH CODE LENGTH LM/CTN5mm x 130mm x 1200mm HMR-MDF RE-05/130 1.20m 128mm x 120mm x 1200mm HMR-MDF RE-08/120 1.20m 1212mm x 145mm x 1200mm HMR-MDF RE-12/145 1.20m 1212mm x 168mm x 1200mm HMR-MDF RE-12/168 1.20m 1212mm x 240mm x 1200mm HMR-MDF RE-12/240 1.20m 12

COLOUR CODE QTY8mm x 120mm Corner HMR-MDF RE-08/120CR 20 Units

31 mm

29 m

m

21 m

m

50 mm

35m

m

65mm

Hammered NosingCOLOUR CODE LENGTH LM/CTNMill Finish HT-917 3.31m 33.1BT Gold HT-917G 3.31m 33.1BT Bronze HT-917B 3.31m 33.1BT Pewter HT-917P 3.31m 33.1

Sawtooth Bull NosingCOLOUR CODE LENGTH LM/CTNMill Finish HT-505 3.66m 36.6BT Gold HT-505G 3.66m 36.6Brass HT-506 3.66m 18.3

Heavy Duty Step Nosing (D/C)COLOUR CODE LENGTH LM/CTNMill Finish HT-920 3.66m 36.6

EXPANSION COVERS RAMP EDGE™

ORDINARY STAIR NOSINGS

REDUCERS AND RAMPS

Construction Joint CoverSIZE COLOUR CODE LENGTH LM/CTN100mm Mill Finish HT-105 3.66m 36.6

Expansion Set (D/C/S)SIZE COLOUR CODE LENGTH LM/CTN3.0mm Brass HT-120 3.66m 18.33.0mm Mat Silver HT-125S 3.66m 18.3

Control Joint Ramp (D/C)SIZE COLOUR CODE LENGTH LM/CTN86mm Mat Silver HT-930S 3.66m 36.6

Control Joint 2mm Edge (D/C)SIZE COLOUR CODE LENGTH LM/CTN72mm Mat Silver HT-950S 3.66m 36.6

Slip Resistance P3

AS 1428.1:2009 compliant Threshold Ramps

Slip Resistance P1

Slip Resistance P4

Slip Resistance P4

Slip Resistance P3 & R10 (with BBS LCS)MCRF = 8kW/m2 (with BBS LCS)

MSDR = 410%-minutes (with BBS LCS)

Slip Resistance P3 & R10 (with BBS LCS)MCRF = 8kW/m2 (with BBS LCS)

MSDR = 410%-minutes (with BBS LCS)




56.3mm

30m

m

2mm

2mm

50mm

30m

m

2mm

2mm

26mm50mm

88mm

28m

m

72.5mm

50mm

61.36mm

25m

m

2.4m

m1.

6mm

50mm

30m

m

50mm66.2mm

36m

m

8mm

70mm

Square Tile Nosing (D/C)COLOUR CODE LENGTH LM/CTNMat Silver HT-220S 3.66m 36.6

Square Double Tile Nosing (D/C)COLOUR CODE LENGTH LM/CTNMat Silver HT-221S 3.66m 36.6

Bull Nose Tapered Nosing (D/C)COLOUR CODE LENGTH LM/CTNMat Silver HT-222S 3.66m 36.6

Bull Nose Tile Nosing (D/C)COLOUR CODE LENGTH LM/CTNMat Silver HT-223S 3.66m 36.6

Square Tapered Nosing (D/C)COLOUR CODE LENGTH LM/CTNMat Silver HT-225S 3.66m 36.6

Over Carpet NosingCOLOUR CODE LENGTH LM/CTNMat Silver HT-229S 3.66m 36.6

50mm TPE InsertCOLOUR CODE LENGTH LM/CTNBlack HT-50B 37m 74Grey HT-50G 37m 74Safety Yellow HT-50SY 37m 74

26mm TPE InsertCOLOUR CODE LENGTH LM/CTNBlack HT-26B 37m 148Grey HT-26G 37m 148Safety Yellow HT-26SY 37m 148

GREYBLACK SAFETY YELLOW

VINYL INSERT STAIR NOSINGS

LUMINOUS CONTRASTING STRIPS

When installed with a BBS TPE luminous contrasting strip – Slip Resistance P4 – MCRF = 8kW/m2 and MSDR = 410 percent-minutes

FLOATING FLOOR ENDS




22.5mm

7.5m

m

12.5mm

5.1m

m

19.5mm

8.1m

m

10.5

mm

29.5mm

19.5mm

29.5mm

12.5

mm

10.1

mm

19.5mm

29.5mm

17.5

mm

15.1

mm

19.5mm

29.5mm

17.2

mm

19.6

5mm

19.5mm

20.5

mm

18.1

mm

29.5mm

19.5mm

9.2m

m

8.0

mm

5mm EndCOLOUR CODE LENGTH LM/CTNMat Bronze HT-306B 3.30m 33Mat Silver HT-306S 3.30m 33

17mm EndCOLOUR CODE LENGTH LM/CTNMat Bronze HT-309B 3.30m 33



16mm / 8mm Angle EndCOLOUR CODE LENGTH LM/CTNMat Bronze HT-323B 3.30m 33Mat Silvefr HT-323S 3.30m 33








37.4mm

4.2m

m

40mm

12m

m

26.4mm

10m

m

16.5mm

37.4mm

8.1mm

8.1

mm

24.0

mm

8mm Ezi-Clip™ StairCOLOUR CODE LENGTH LM/CTNMat Bronze HT-315B 3.30m 33Mat Silver HT-315S 3.30m 33



25mm

7.5m

m

30mm

5.1m

m

5mmCOLOUR CODE LENGTH LM/CTNMat Bronze HT-308B 3.30m 33Mat Silver HT-308S 3.30m 33

EZI-CLIP™ SYSTEM FLOATING FLOOR STAIRS

5mm RAMP AND EXPANSION

CoverCOLOUR CODE LENGTH LM/CTNMat Bronze HT-362B 3.30m 33Mat Silver HT-362S 3.30m 33Mill Finish HT-360 3.30m 33Black ABS HT-361 3.30m 33

RampCOLOUR CODE LENGTH LM/CTNMat Bronze HT-364B 3.30m 33Mat Silver HT-364S 3.30m 33Mill Finish HT-360 3.30m 33Black ABS HT-361 3.30m 33

EndCOLOUR CODE LENGTH LM/CTNMat Bronze HT-366B 3.30m 33Mat Silver HT-366S 3.30m 33Mill Finish HT-360 3.30m 33Black ABS HT-361 3.30m 33

46.5mm

8mm

18.63mm12.5mm

5mm RampCOLOUR CODE LENGTH LM/CTNMat Bronze HT-307B 3.30m 33Mat Silver HT-307S 3.30m 33

IMAGETO COME

Slip Resistance P4AS 1428.1:2009, design compliant

Slip Resistance P4AS 1428.1:2009, design compliant

5 m

m5

mm

5 m

m

extrusion, anodising and powder coat ......10.0mm flex ht-046f 3.00m 60 12.5mm flex ht-048f 3.00m 60...

Documents