eye protection markings - arco › 103 › content › downloads › ... · eye protection markings...
TRANSCRIPT
Eye Protection MarkingsThe diagram below explains the technical details and manufacturer’s marks on Safety Eyewear according to EN166.
Lens markingScale number of filters (optional) 2-1
2
Manufacturer’s ID code
Optical class 1
Symbol of optical classOptical class 1 = best class
Continuous use 1Intermittent use 2
FMechanical strength (optional)
Symbol of mechanical strength
SIncreased robustness (12 m/s)
F
Medium energy impact (120 m/s) B
High energy impact (190 m/s) A
Manufacturer’s ID code
Number of EN standard 166
Symbol of field(s) of use 34
Liquids (goggle/visor) 3
Large dust particles (goggle) 4
Gas and fine dust particles (goggle)
5
Short circuit electric arc (visor) 8
Molten metalsand hot solids (goggle/visor)
9
Frame marking
T Temperature(-5ºC to +55ºC)
9 Symbol of non-adherence of molten metal and resistance to penetration of hot solids (optional)
K Resistance to surface damage (anti-scratch)
N Resistance to misting and fogging
CE CE mark of conformity
B Symbol of resistance to high speed particles (optional)
F low energy impact (45 m/s) (spectacle/goggle/visor)
B mediumenergy impact(120 m/s) (goggle/visor)
CE CE mark of conformity
0196 Certified body number
Liquid andDust
Gas TightAnti-fogAnti-scratch MoltenMetal
Side ArmAdjustment
99%BridgeMovement
Side ArmExtending
100%ExtremeTemperature
KEY
Low energy impact (45 m/s)
Field(s) of use (optional)
Basic use no symbol
T extreme temperature (-5°C/+55°C)
For advice on specific solutions and prescription eye wear, call your local branch.
A high energyimpact (190 m/s) (visor)