fabrication and characterization of zinc oxide ...714612/cover01.pdf · muhammad yousuf soomro...
TRANSCRIPT
Fabrication and characterization of Zinc Oxidenanostructures for Piezoelectric, Mechanical and
Electrical applications
Muhammad Yousuf Soomro
Linköping Studies in Science and TechnologyDissertations No. 1599
Linköping Studies in Science and Technology No. 1599, 2014Department of Science and Technology
Linköpings universitet60174 Norrköping, Linköping
www.liu.se
Muham
mad Yousuf Soom
ro Fabrication and Characterization of Zinc Oxide nanostructures for Piezoelectric, M
echanical and Electrical applications 2014
Back Cover
Muhammad Yousuf Soomro received his M.Sc. degree in 2004 in physics from University of Sindh, Jamshoro, Pakistan. He started in June 2010 as Ph.D student in Physical Electronics and Nanotechnology division at department of science and technology (ITN), Norrköping, Linköping University, Sweden under the supervision of Prof. Magnus Willander. His research interest concern with piezoelectric, mechanical and electrical characterization and applications of ZnO nanowires/nanorods and nanotubes. He is also involved in the fabrication of polymer based light emitting diodes.