faculty of technology b. tech. petroleum engineering engg.pdf · faculty of technology b. tech....
TRANSCRIPT
1
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – III(R 2013)
PE6311 Fluid Mechanics Laboratory
Requirements for a batch of 30 students
Sl. No.
Description of Equipment
Quantity Required (R)
Quantity available
(A)
Deficiency
%
1. Viscometer 1
2. Venturi meter 1
3. Orifice meter 1
4. Rotameter 1
5. Weir 1
6. Open drum with orifice 1
7. Pipes and fittings 1
8. Helical and spiral coils 1
9. Centrifugal pump 1
10. Packed column 1
11. Fluidized bed 1
2
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – III(R 2013)
CH6368 Heat Transfer Laboratory
Requirements for a batch of 30 students
Sl. No.
Description of Equipment
Quantity Required (R)
Quantity available
(A)
Deficiency
%
1. Cooling Tower 1
2. Tray Dryer 1
3. Open Pan Evaporator 1
4. Boiler 1
5. Packed Bed 1
6. Double Pipe Heat Exchanger 1
7. Bare and Finned Tube Heat Exchanger
1
8. Condenser 1
9. Helical Coil 1
10. Agitated Vessel 1
3
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – IV(R 2013)
PE6411 Petroleum Testing Laboratory
Requirements for a batch of 30 students
Sl. No.
Description of Equipment
Quantity
Required (R)
Quantity available
(A)
Deficiency
%
1. Conradson Apparatus 2
2. Karl –Fisher 2
3. Dr. Test Apparatus 2
4. Bomb Calorimeter 2
5. API Distillation Apparatus 2
6. Junkers Gas Calorimeter 2
7. Abbey Refractometer 2
8. Mercaptain as sulphur Estimation Apparatus 2
4
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – IV(R 2013)
CH6613 Mass Transfer Laboratory
Requirements for a batch of 30 students
Sl.No.
Description of Equipment
Quantity Required (R)
Quantity available
(A)
Deficiency
%
1. Simple distillation setup 2
2. Steam distillation setup 2
3. Packed column 2
4. Liquid-liquid extractor 2
5. Vacuum Dryer 2
6. Tray dryer 2
7. Rotary dryer 2
8. Ion exchange column 2
9. Rotating disc contactor 2
10. Cooling tower 2
11. Absorption column 2
5
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – V (R 2013)
PE6511 GEOLOGY LABORATORY
Requirements for a batch of 30 students
Sl.No.
Description of Equipment
Quantity Required (R)
Quantity available
(A)
Deficiency
%
1. Sieve Shakers 1
2. Sieves set 1
3. Petrological Microscopes 1
4. Hot Oven 1
5. 1000 ml and 50 ml beakers As per Requirement
6
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – V(R 2013)
PE6512 DRILLING FLUIDS AND CEMENTING TECHNIQUES LABORATORY
Requirements for a batch of 30 students
Sl.No.
Description of Equipment
Quantity Required (R)
Quantity Available
(A)
Deficiency
%
1. Mud balance Sieve Shakers 1
2. Picnometer and F.G.T meter 1
3. Filter press, low pressure – Low temperature and high temperature filters
1
4. pH meter 1
5. Test cell meters 1
6. Compact Curing chamber 1
7. Thickening time tester 1
7
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – VI (R 2013)
PE6612 PROCESS CONTROL AND INSTRUMENTATION LABORATORY Requirements for a batch of 30 students
Sl. No.
Description of Equipment
Quantity Required (R)
Quantity available
(A)
Deficiency
%
1.
U tube manometer with controller
1
2.
Interacting Tank
1
3.
Non Interacting Tank
1
4.
Open loop pressure control system with pressure Tuner
1
5.
Closed loop control system
1
6.
Different types of Control valve (equal on –off linear)
1
7.
Closed loop thermal control system with Temperature Tuner
1
8
Proportional Controller
1
9
Closed loop flow control system with Flow Transmitter
1
10
Closed loop level control system with Level Transmitter
1
11
Cascade control system
1
12
Mercury Thermometer system
1
8
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – VII (R 2013)
PE6711 OIL FIELD EQUIPMENT DESIGN DRAWING Requirements for a batch of 30 students
Sl.No.
Description of Equipment
Quantity Required
(R)
Quantity available
(A)
Deficiency
%
1. Intel Dual Core computer or better hardware with suitable graphics facility 30 Nos
2. Licensed software for Drafting and Modeling
30 Licenses
3. Laser Printer or Plotter to print / Plot drawings
2 Nos
9
Faculty of Technology
B. Tech. Petroleum Engineering
SEMESTER – VII (R 2013)
PE6712 PETROLEUM EQUIPMENT DESIGN DRAWING Requirements for a batch of 30 students
Sl.No.
Description of Equipment Quantity
Required (R)
Quantity available
(A)
Deficiency
%
1. Vacuum pump with trap 1
2. Rotary film evaporator 1
3. Heat exchange 1
4. Distillation set 1
5. Thin layer Chromatographic set complete with Glass plate, Developer, Tank and UV fluorescent light
1