featuring: gator wrap...then overlapped creating a cross-link and fused bond between the rubber and...

GATOR WRAP Infi-Shield® External Gator Wrap

Infi-Shield®Gator Wrap Specification Each manhole, catch basin or pipe joint shall be sealed with an external rubber sleeve similar to the Infi-Shield Gator Wrap as manufactured by Sealing Systems Inc (763-478-2057). The seal shall be made of a Stretchable, Self-Shrinking, Intra-Curing Halogenated based rubber with a minimum thickness of 30 mils. The back side of each unit shall be coated with a cross-linked re-enforced butyl adhesive. The butyl adhesive shall be non-hardening sealant with a minimum thickness of 30 mils. The seal shall be designed to stretch around the joint and then overlapped creating a cross-link and fused bond between the rubber and butyl adhesive. Gator Wrap forms a continuous rubber seal on a manhole joint which prevents water and soil from infiltrating through the manhole, catch basin or concrete pipe joint. INFI-SHIELD Gator Wrap® is available in 6” and 9” widths and comes in a 50 foot roll or in a user-friendly kit which has six sixteen foot rolls. Gator Wrap® is also available in a 12” width by 50 foot roll.

9350 County Road 19 Loretto, MN 55357 763-478-2057 800-478-2054 Fax 763-478-8868 www.infi-shield.com

Infi-Shield® Gator Wrap prevents infiltration by providing a water-tight seal

around any manhole, catch basin or concrete pipe joint. Gator Wrap resists harsh

soil conditions and also provides a root barrier for any crack or joint.

Infi-Shield® Gator Wrap installs easily with no special tools and can be

immediately backfilled. EPDM Rubber Specifications

Material Meets: ASTM C877 Type III and C923

Sealing Systems, Inc.

Physical Properties

ASTM Test Method

Test Results

Hardness D2240 64 Tensile, PSI D412 1488 PSI Elongation % D412 478 % Compression Set D395

1sa F @22 hrs 25.1%

Low Temperature D746 Pass/no cracks

Tear Resistance D624 155 lbf/in Heat Aging D573 672 hrs @ 240° F Pass

Tensile Strength minimum, PSI (MPa) > 100 PSI

Pass

Water Absorbtion D471 70 hrs @ 212° F

Volume Swell 5.5% Mass Change 3.7%

Elongation % minimum 300% at break Pass

Ozone Resistance D518 Pass/no cracks

Aging and Storage 300% elongation applied (10 Years)

Pass

UV Resistance No visible signs of crack-ing

Pass

Disclaimer: This technical data information and recommendations offered are based on independent lab test results, and findings we believe to be reliable and complete.

Sealing Systems is dedicated to maintain a leadership role

and erosion in manholes, catch basins and pipe joints.We desire to provide our customers with the highest quality

9350 County Rd. 19 • Loretto, MN 55357 • 763-478-2057

Toll Free • (800) 478-2054 • Fax (763) 478-8868 • www.ssisealingsystems.com

Featuring:

SEALING SYSTEMS, INC.

Mission Statement

External Chimney Seal Internal Chimney Seal

3263_1012

in specialty products designed to prevent inflow/infiltration

and most advanced systems for both rehabilitation andnew construction across the global market.

GATOR WRAPInfi-Shield® External Gator Wrap

Infi-Shield®Gator Wrap SpecificationEach manhole, catch basin or pipe joint shall be sealedwith an external rubber sleeve similar to the Infi-ShieldGator Wrap as manufactured by Sealing Systems Inc (763-478-2057). The seal shall be made of a Stretchable, Self-Shrinking, Intra-Curing Halogenated based rubberwith a minimum thickness of 30 mils. The back side ofeach unit shall be coated with a cross-linked re-enforced butyl adhesive. The butyl adhesive shall be non-hardening sealant with a minimum thickness of 30 mils. The seal shall be designed to stretch around the joint and then overlapped creating a cross-link and fused bondbetween the rubber and butyl adhesive. Gator Wrap forms a continuous rubber seal on a manhole joint which prevents water and soil from infiltrating through the manhole, catch basin or concrete pipe joint.

INFI-SHIELD Gator Wrap® is available in 6” and 9” widths and comes in a 50 foot roll or in a user-friendly kit which has six sixteen foot rolls. Gator Wrap® is also available in a 12” width by 50 foot roll.


Infi-Shield® Gator Wrap prevents infiltration by providing a water-tight seal

around any manhole, catch basin or concrete pipe joint. Gator Wrap resists harsh

soil conditions and also provides a root barrier for any crack or joint.

Infi-Shield® Gator Wrap installs easily with no special tools and can be

immediately backfilled. EPDM Rubber Specifications

Material Meets: ASTM C877 Type IIIand C923


Physical Properties

ASTM Test Method

Test Results

Hardness D2240 64 Tensile, PSI D412 1488 PSIElongation % D412 478 %Compression Set D395

1sa F @22 hrs25.1%

Low Temperature D746 Pass/nocracks

Tear Resistance D624 155 lbf/inHeat Aging D573 672 hrs @ 240° F Pass

Tensile Strength minimum, PSI (MPa) > 100 PSI

Pass

Water Absorbtion D471 70 hrs @ 212° F

Volume Swell 5.5% Mass Change3.7%

Elongation % minimum 300% at break Pass

Ozone Resistance D518 Pass/nocracks

Aging and Storage 300% elongationapplied (10 Years)

Pass

UV Resistance No visible signs of crack-ing

Pass

Disclaimer: This technical data information and recommendations offered are basedon independent lab test results, and findings we believe to be reliable and complete.


Infi-Shield®Gator Wrap SpecificationEach manhole, catch basin or pipe joint shall be sealed

with an external rubber sleeve similar to the Infi-Shield

Gator Wrap as manufactured by Sealing Systems Inc

(763-478-2057). The seal shall be made of a Stretchable,

Self-Shrinking, Intra-Curing Halogenated based rubber

with a minimum thickness of 30 mils. The back side of

each unit shall be coated with a cross-linked re-enforced

butyl adhesive. The butyl adhesive shall be non-

hardening sealant with a minimum thickness of 30 mils.

The seal shall be designed to stretch around the joint and

then overlapped creating a cross-link and fused bond

between the rubber and butyl adhesive. Gator Wrap

forms a continuous rubber seal on a manhole joint which

prevents water and soil from infiltrating through the

manhole, catch basin or concrete pipe joint.

INFI-SHIELD Gator Wrap® is available in 6” and 9”

widths and comes in a 50 foot roll or in a user-friendly kit

which has six sixteen foot rolls. Gator Wrap® is also

available in a 12” width by 50 foot roll.


Infi-Shield® Gator Wrap prevents

infiltration by providing a water-tight seal

around any manhole, catch basin or

concrete pipe joint. Gator Wrap resists

harsh soil conditions and also provides a

root barrier for any crack or joint.

Infi-Shield® Gator Wrap installs easily

with no special tools and can be

immediately backfilled.

EPDM Rubber Specifications


Physical

Properties

ASTM Test

Method

Typical

ValueSheer Strength D816 15 lb. PSI

min

Tensile, PSI D412 50 PSI

Elongation % D412 500 %

Penetration D217 40/120 MM

Low Temperature D746 Minus 49º F

flexibility

Heat Aging D573 7 days @ 90

degrees C

Tensile Strength minimum, PSI (MPa)

> 100 PSI

Pass

Fusion 5/64” (0.2) max Pass

Elongation % minimum 300% at

break

Pass

Ozone Resistance no visible signs of

cracking

Pass

Aging and Storage 300% elongation

applied (10 Years)

Pass

UV Resistance No visible signs of

cracking

Pass

Material Meets ASTM C923 and C877– Mastic meets ASTM C990 Disclaimer: This technical data information and recommendations offered are based

on test results, and findings we believe to be reliable and complete.





Featuring:


Mission Statement


3263_1012







Featuring:


Mission Statement


3263_1012



GATOR WRAPInfi-Shield® External Gator Wrap

Infi-Shield®Gator Wrap SpecificationEach manhole, catch basin or pipe joint shall be sealed































Physical

Properties

ASTM Test

Method

Typical

ValueSheer Strength D816 15 lb. PSI

min





flexibility


degrees C


> 100 PSI

Pass



break

Pass


cracking

Pass


applied (10 Years)

Pass


cracking

Pass







Featuring:


Mission Statement


3263_1012







Featuring:


Mission Statement


3263_1012



GATOR WRAP INSTALLATION INSTRUCTIONS

Sealing Systems, Inc. 9350 County Road 19 Loretto, MN 55357 763-478-2057 800-478-2054 Fax 763-478-8868 www.infi-shield.com

1. Expose the area that is to be sealed. Clean the entire area around the joint with a wire brush and whisk broom. Remove any sharp protruding edges around the joint with an abrasive tool. When finished cleaning, the entire area must be dry and free of any dirt.

2. Remove the first foot of paper backing from the mastic. Center and place the Gator Wrap® around the joint. Continue to remove paper backing as you apply the Gator Wrap to the entire structure.

3. Seal the overlapping area with a 6” overlap. Be sure not to stretch material at the overlap area.

4. Cut excess material using a utility knife. Using a rubber mallet or hand held roller, firmly flatten the Gator Wrap® 360 degrees around joint.

1 2

4 3





Featuring:


Mission Statement


3263_1012




Infi-Shield®Gator Wrap Specification Each manhole, catch basin or pipe joint shall be sealed































Physical

Properties

ASTM Test

Method

Typical

Value

Sheer Strength D816 15 lb. PSI

min





flexibility


degrees C


> 100 PSI

Pass



break

Pass


cracking

Pass


applied (10 Years)

Pass


cracking

Pass







Featuring:


Mission Statement


3263_1012







Featuring:


Mission Statement


3263_1012




Infi-Shield®Gator Wrap Specification Each manhole, catch basin or pipe joint shall be sealed































Physical

Properties

ASTM Test

Method

Typical

Value

Sheer Strength D816 15 lb. PSI

min





flexibility


degrees C


> 100 PSI

Pass



break

Pass


cracking

Pass


applied (10 Years)

Pass


cracking

Pass







Featuring:


Mission Statement


3263_1012







Featuring:


Mission Statement


3263_1012



featuring: gator wrap...then overlapped creating a cross-link and fused bond between the rubber and...

Documents