February 2016 Newsletter

Enchanting ,Creative, and Functional Vessels

Contents

President’s Letter ............................................... 2

Club Officers and Mentors ................................. 2

Members Gallery ............................................... 3

A Range of Examples for Turned Wooden Goblets ............................................................... 5

January Demonstration ...................................... 6

Simple 3-Wheel Steady ...................................... 7

Empty Bowls — last call! .................................... 8

Annual Membership Renewal ........................... 9

Ask Dale — stave bowls ..................................... 9

Ask Dale — all about platters .......................... 10

AAW Annual Convention ................................. 12

Wood Turning Sources .................................... 15

Supporters of North Valley Woodturners ....... 15

New/Returning Members ................................ 16

February 2016

`

Return to Page 1 Page 2 of 16

0BPresident’s Letter I was happy to see the good turn-out for our January meeting. We were fortunate that we had a brief break in the rain that evening. Hopefully all of you appreciate the new format we have initiated for our demonstrations. Our intent is to be able to expand the variety of the projects we present and increase your interest. By selecting published projects and providing a copy of the project article prior to the demonstration you will be prepared with questions and comments that will spur discussion. We are into February as I type this letter. We made it through Groundhog Day (did anyone see his shadow) and Valentine’s Day will be upon us before our next meeting. Did you turn something for your sweetheart? If your sweetheart is like mine she/he looks over your shoulder when you’re turning to see what the next turning will be that she/he will want to claim. At our February meeting we will complete the viewing of the Glenn Lucas Video that we began at the November meeting. For those of you that missed the November meeting you will want to attend. We will re-run a short portion of that which we viewed in November so that you can view the main portion of the presentation. Our February meeting will be your last opportunity to bring any bowls that you would like to contribute to the “Empty Bowls” fund-raiser for the Torres Shelter in Chico. The Torres Shelter serves as a transition facility for less fortunate members of our community.

Well, that’s all for now. See you at the meeting. Keep on turning, Lynn

1BClub Officers and Mentors

President: Lynn Shoger * 1874 Andrew Place Paradise, CA 95969 Email: Lynn Shoger@attn.net Phone: 530-876-1419

Vice President: Paul Atkins *

1729 Diamond Avenue Chico, CA 95928 Email: larenpeedee@yahoo.com Phone: 530-570-3298

Secretary: William (Bud) Dilbeck * 9445 Dwyer Court Durham, CA 95938 Email: fish4bud@pacbell.net Phone: 530-345-5006

Treasurer: Gerald (Jerry) Letson 357 Skyline Boulevard Oroville, CA 95966 Email: Jerr-carr@sbcglobal.net Phone: 530-589-2981

At-Large: Kirk Berger * 9 Lindo Park Drive Chico, CA 95926 Email: krberger71@comcast.net

Phone: 530-895-3959 * Denotes Mentors **********************************************

February 2016

`

Return to Page 1 Page 3 of 16

2BMembers Gallery

Turnings by Harvey Holland

Lidded Bowl - Maple Burl and Claro walnut

Cherry bowl

Spalted maple bowl

Myryle bowl

more turnings by Harvey Holland

Walnut bowls

Rattle

Turnings by George Morris

Wine Glasses

Ornament

February 2016

`

Return to Page 1 Page 4 of 16

Turnings by Rick Fowler

“ Wine Goblets

Goblet with Captive Rings

Turning by Gary Nielsen

Walnut platter with carved top

Turnings by Paul Atkins

Miniature Goblet

Charred Wood Bowl

The blank for this piece came out of Paul’s

backyard fire pit

February 2016

`

Return to Page 1 Page 5 of 16

3BA Range of Examples for Turned Wooden Goblets

There is a long tradition for the shape and form of goblets. Contemporary wood turners are, however, sometimes moving in new and unusual directions.

February 2016

`

Return to Page 1 Page 6 of 16

4BJanuary Demonstration Our January demonstration was provided by Lynn Shoger. As you will recall from the January newsletter, the demonstration showed the turning of a “Wineglass” Goblet. Directions for turning this project were taken from the Woodturning Design magazine, which is no longer in publication, and were included in the January newsletter.

We will not include a description of the demonstration here since you have received the article on the project. However, we are including some additional information related to the project. A profile sketch of the project goblet was included with the demonstration. That sketch was provided was forwarded in a separate e-mail sent earlier. We also discussed the use of the

“steady rest”, or “steady”, which supports the goblet during hollowing of the bowl of the goblet. The “steady” used in the demonstration was a commercially available devise manufactured by Oneway Corporation. We also mentioned that a shop-made “steady” could be constructed by members. There are several types of “steadys” that have been developed by a number of people. A quick search of the internet turned up three such designs. Internet links for those designs includes: http://ravenview.com/blog/2010/04/22how-to-make-a-spindle-steady-rest/ and http://www.novawoodturnersguild.com/docs/steadyrest.pdf/ http://www.scrollsaws.com/WoodLathe/woodlathestring.htm http://hants-woodturners-hwa.co.uk/try-yourself/3-wheeled-steady-rest/ and http://www.hdv.net/Making%20a%20Steady%20Rest.htm

An example of a more complex “steady” is shown here. Complete instructions for constructing this “steady” may be found on either of the first two links listed above.

February 2016

`

Return to Page 1 Page 7 of 16

There were a number of good examples of “wineglass” goblets entered in the Members Gallery at the meeting. One of our members has come forward with an example similar to the design found in the third two links referenced above. He used his version of the “steady” to turn his project goblet. The “steady” that this member made used wood supports rather than the metal for the rollers and the base. Complete instructions are found on the next page

5BSimple 3-Wheel Steady These instructions for constructing your own Steady rest were downloaded from the Woodturning Online website. This is the steady rest referred to on the previous page and the one that one of our members built. Making a Steady Rest. Designer: Herman de Vries I like things simple, and this couldn’t be simpler. Drill holes through a piece of 1½” square steel tubing and weld in ¾” threaded rod. Make absolutely sure that the threaded rods are parallel to each other and perpendicular to the square steel tubing. Drill a hole in the exact center of the steel tubing for the bolt that will clamp it to the lathe. For my lathe, I use a ½” bolt through a piece of ½ steel under the ways to clamp the steady rest to the ways. The ½” steel under the ways is self-centering, so the steady rest is automatically centered on the ways.

The wheels are used roller blade wheels I picked up for free at a shop that repairs skates. They were worn down and out-of-round, but the bearings were fine. It just took a couple of seconds on my belt sander to turn them perfectly round. (Stick a bolt through the bearing, start your belt sander and hold the wheel on the bias against the sanding belt. Use a coarse belt). Route a channel wide enough for the wheels in the center of a couple of pieces of oak, plus a little room for a washer on each side of the wheel’s bearings. Drill holes laterally through the oak pieces for the bolt to hold the wheels in place. Drill 7/8” holes into the oak crosspieces to fit the threaded rods. The holes are drilled oversized so the oak does not bind on the rods. Eight washers and eight ¾” nuts and you are finished.

This is one solid mother of a rig. Clamped to the bed I can’t even budge it. It has the added advantage of being infinitely adjustable and there is no limit to the pressure you can bear on the contact of the wheels with the workpiece. It’s quiet and smooth.

February 2016

`

Return to Page 1 Page 8 of 16

A steady can come in many sizes and designs. What they have in common is that they make work easier and safer. One size definitely does not fit all purposes or individuals. You can use different size materials. I have one of ½” rod for small work, but for the big stuff I do I need this one.

6BEmpty Bowls — last call! It is time for us to complete turning wooden bowls that can be donated to the Empty Bowl program here in Chico. The part of the program we participate in is the annual dinner fundraiser for the Torres Shelter in Chico. This year the fundraising dinner will be held on February 25th, 2016. So, it is not too late for us to continue turning bowls to contribute. This is your last meeting to deliver your bowls. Last year our club donated over three dozen bowls to this fundraising program. It would be great if

we could double our contribution for this coming year. Bowls do not need to be fancy. Simple straight-forward bowls are as appreciated as any. Our participation in last year was such a success that rather than distribute our wooden bowls as a part of the entry contribution they were placed in a special Silent Auction which raised additional money. This was a real benefit for the program. You do not need to wait until just before the event to make your contribution. You can make your donation of one, two, or whatever number of bowls at regular meeting or by special arrangement by calling Lynn Shoger at 530-876-1419. Thanks in advance for your participation in this worthy cause.

This year’s fundraiser will be held at Chico High School located at 901 The Esplanade on February 25th. There will be two seatings (one at 5 pm and a second at 6 pm) for a dinner consisting of soups made by local chefs. The cost for the dinner is $12 per person purchased in advance by e-mailing michelle@chicoshelter.org.

February 2016

`

Return to Page 1 Page 9 of 16

7BAnnual Membership Renewal

It’s that again, time to renew your membership for the coming year. Thank-you for your participation in the North Valley Woodturners. Our club would not be what it is today without your participation. Our membership dues will continue to remain the same at $35 per year and need to be paid by the first of the year. We have had an interesting and exciting past year and are looking forward to continued new things for the year ahead. Please make payment of your dues by cash or check to Gerald (Jerry) Letson, in person or by mail.

The North Valley Woodturners (NVWT) is an affiliated chapter of the American Association of Woodturners. We are a non-profit organization dedicated to providing education, information, and an organization for individuals interested in woodturning. Whatever your skills, if you want to take them skills to the next level, the North Valley Woodturners is a local club for you. Check our website www.northvalleyturners.org for meeting times and location and come join our members at a meeting! Membership Benefits

Monthly meetings and other activities including summer picnic and holiday party

Demonstrations by local members

Monthly Members Gallery participation

Monthly newsletter

Individual mentoring by experienced members

Wants and Disposal announcements in the monthly newsletter

Participation in public demonstrations

8BAsk Dale — stave bowls

“Ask Dale” presents questions submitted by readers of the magazine Woodturning Design to Dale Nish, noted woodturner, educator, author and founder of the Utah Woodturning Symposium. Dale Nish would respond to these questions in a column that he wrote for Woodturning Design. When the magazine was contacted for permission for us to re-publish these questions and answers they agreed provided they were credited as the source. Please note that Woodturning Design has ceased to exist. It must be noted that Dale Nish passed away suddenly at the end of May 2013 and these questions with his responses are a lasting legacy. Question (from Issue 17): I am very interested in learning to turn stave bowls. I construct the bowls with twelve sides cut at a 15° angle. In an article published in a woodworking magazine they recommend using a scraper to turn the inner surfaces of the bowl. I tried this technique, and although it was successful, it was very difficult to control the scraper until the inside of the bowl was smooth. In another article I read on turning stave bowls, the recommended technique for turning the inner surface was to cut a rabbet using a parting tool and then finish-turning the inside with a box scraper. My question is, what is the proper technique for turning the inside of a stave bowl? (Staved bowl construction is very similar to segmented bowl construction, the difference is the vertical orientation of the stave grain versus the horizontal orientation of the segmented grain.) Answer: Turning the inside of a stave bowl is not too difficult. However, the level of difficulty depends on several things. The first is the depth of the bowl, because the deeper the bowl, the more difficult it will be to turn. For beginners, a maximum depth would likely be around 6”. The deeper bowl will be more likely to have chatter marks due to vibration of the wood and make a clean cut more difficult. At the same time, the cutting tool will need to extend further over the tool rest, also resulting in chatter because of tool vibration. The wall thickness of the bowl is also a considersation. The material selected for most work should be at least ¾” to 1” in thickness, sound, and free from defects. Thin wood is more difficult to turn and may even result in the work coming apart during the turning process. Another consideration is

February 2016

`

Return to Page 1 Page 10 of 16

the diameter of the piece. I would suggest a diameter no larger than 8”, at least in the beginning. Perhaps 6” would be a better limit, because smaller work will turn with less vibration and it will be easier to produce a satisfactory surface. It is very important that the joinery be precise and all joints fit tight and secure. Use high-quality glue, such as Franklin Titebond, and work with precision and accuracy. Let the glued-up piece set at least overnight before beginning the turning process. The bowl can be turned safely and accurately using several different methods, depending on tools available and the experience and confidence of the turner. As the bowl is staved, the vertical surfaces will be flat grained with no end grain to deal with othe than the top of the bowl. For the beginner, I would suggest a heavy ½” scraper, with a thickness of at least 3/8”. The tool should be sharp with a burr edge and held in a trailing position. To hold the scraper in a trailing position, adjust the tool rest close to the work so the tool will have less overhang. Raise the tool rest to the height necessary to position the scraper blade at the center of the bowl, and have the handle above center, possibly an inch or so. This position allows the burr edge to cut efficiently, and raising the handle will pull the cutting edge away from the surface, preventing or reducing problems with “catches”. A 6”-diameter piece should be turned at around 1,000 RPM. This should reduce the vibration due to the uneven interior of the bowl. If necessary, the speed could be increased to about 1,500 RPM. Higher speeds will allow a cleaner cut and reduce tool chatter. Once the inside is turned with a ½” scraper, the interior will have a series of small ridges or shallow coves due to the shape of the narrow scraper. At this point, a heavy scraper, 1-1/4” to 1-1/2” wide by 3/8” thick, would do a good job of smoothing the interior. Freshly sharpened and used with a light cut, the scraper will produce a finish which would need very little sanding. A more experienced turner who is skilled with the bowl gouge, could make bevel-rubbing cuts from the top inside to the bottom corner with the gouge edge, producing a smooth cut which would require little sanding. However, the bottom inside corner would need to be finished with a sharp scraper which would work on the inside radius.

9BAsk Dale — all about platters “Ask Dale” presents questions submitted by readers of the magazine Woodturning Design to Dale Nish, noted woodturner, educator, author and founder of the Utah Woodturning Symposium. Dale Nish would respond to these questions in a column that he wrote for Woodturning Design. When the magazine was contacted for permission for us to re-publish these questions and answers they agreed provided they were credited as the source. Please note that Woodturning Design has ceased to exist. It must be noted that Dale Nish passed away suddenly at the end of May 2013 and these questions with his responses are a lasting legacy. Question (from issue 18): I am a new turner, and have been turning for about two years. I’ve been turning mostly bowls along with some miniatures on my mini lathe. Now I’ve become interested in turning some plates and platters. I own quite a selection of books by many authors. Unfortunately, I have not been able to find any literature on this subject. It appears that the topic just simply isn’t covered in any detail. I am interested in learning about holding fixtures, specifically methods of holding the front and reverse sides of the plate/platters. Could you point me in the right direction and possibly provide some helpful hints on the subject? Answer: Platters are a very useful woodturning project. They are typically turned from wood 1-1/2” to 2” thick and usually 12” to 16” in diameter. Typical uses are for serving crackers, cookies, etc. The following instructions are for use with a screw center faceplate, but a regular faceplate screwed to the top of the platter would work just as well. Step 1: (a) Drill a hole 1/4” dia. 3/4” deep for a platter 1-3/4” to 2” thick. (b) Install the screw center faceplate onto the lathe, and screw the platter onto the screw. (c) For a 12” to 14” platter, set the lathe speed at around 500 rpm. Step 2: (a) True up the edge of the platter. (b) Face off the bottom. (c) Layout the dovetail recess which will receive the chuck jaws in the

February 2016

`

Return to Page 1 Page 11 of 16

expansion mode. The recess is 3-1/2” to 4” in diameter and ¼” deep. (d) Remove the waste wood from the dovetail recess with a small gouge. (e) Clean up the corners and cut a 5° dovetail angle. Step 3: (a) Turn a foot ring around the recess area. The diameter of the foot ring should be about half the diameter of the platter. (b) Turn the platter to rough shape. (c) True up both sides of the outside rim. (d) Complete the outside shape. (e) Design the rim so that it feels comfortable in your hand. (f) Sand and finish the outside of the platter, including the recess. Step 4: (a) Remove the platter from the faceplate. (b) Install the expanding chuck on the lathe. (c) Fit the platter to the expanding chuck. (d) Move the tailstock with the revolving center into the support position. Step 5: (a) Turn the inside of the platter with a 1/2” bowl gouge. (b) Turn a gentle pleasing curve from the rim to the bottom. (c) Measure carefully for depth. Leave 1/4” or more wood above the dovetail recess. Step 6: (a) Sand and finish the inside of the platter.

Sanding: I prefer the Velcro sanding system. The 2” pads work well on the outside of the platter, due to tighter curves. The 3” pads work best on the inside, making it easier to keep large areas flat and smooth. I suggest a sanding sequence of 80, 100, 150, 220, and 320 grits. Finishing: I prefer finishing the platter with a full wet coat of lacquer sanding sealer, brushed on. Let the full wet coat stay on the wood for a minute or two, then wipe dry with a clean cloth, rag, or paper towels (I prefer the Viva brand). When the wet lacquer has been removed, turn on the lathe and spin the platter against a clean cloth, rag, or paper towel until all the lacquer has been removed from the surface and the surface feels dry. The platter is now ready for a coat of Danish oil. I prefer Waterlox, which seems to give a satin sheen finish with only two or three coats. Apply the Waterlox, let it set for three to five minutes, then wipe dry. Let the platter dry for 24 hours before applying another coat, repeating the procedure.

February 2016

`

Return to Page 1 Page 12 of 16

10BAAW Annual Convention

2016 Symposium - Atlanta

AAW's 30th Annual Int'l Symposium in Atlanta, Georgia

June 9-12, 2016

Registration EARLY-BIRD PRICING EFFECTIVE THROUGH MAY 1, 2016

Full Symposium

Individual and/or Spouse

Members: $325,

Non-Members: $360

Spouse/Partner: $185

Optional Ticketed Event:

Celebration Dinner, Saturday,

June 11, 6-7:30pm ~ Members:

$49, Non-members: $59

Students

$99 Ages 19-25,

Student ID required

Optional Ticketed Event:

Celebration Dinner,

Saturday, June 11, 6-

7:30pm ~ Members: $49,

Non-members: $59

Single Days

Individuals

Members: $225 per day,

Non-members: $275

Optional Ticketed Event:

Celebration Dinner,

Saturday, June 11, 6-7:30pm

~ Members: $49, Non-

members: $59

Juried Member Exhibit,

Turning 30

The title theme for the 2016 AAW member exhibition is Turning 30, in celebration of our 30th anniversary. For three decades, the AAW annual exhibitions have encouraged members to present their finest work. Sometimes that means new and innovative ideas and techniques, sometimes presenting perfected techniques and classic forms. This is a proud tradition, and we are excited to bring that spirit forward into our fourth decade.

February 2016

`

Return to Page 1 Page 13 of 16

AAW's 30th Annual Meeting: Youth Involvement

Ages 10 to 18 are eligible to register for free hands-on instruction.

Youth registrations must be submitted by May 1, 2016. Late registrations will be done on site. Space is limited and each registered

youth must be accompanied by an adult who is registered for the symposium. Students will make a variety of projects. Plus, some lucky young turners will even win a complete turning package, including a lathe, tools, and face shield, thanks to our Youth Room sponsors noted to the right.

AAW's 30th Annual Meeting: Public Events

Exhibitions Discover the art and craft of woodturning. Celebrate contemporary sculptural and functional works in wood.

Instant Gallery The AAW Symposium’s Instant Gallery is the largest display of turned-wood objects under one roof! The open member show features more than 1,000 art works and crafts in wood by woodturners who attending the symposium. Many of the works are for sale.

Benefit Auctions Live/Online and Silent Add to your collection. Join in the excitement of online and live bidding or the quieter pace of silent bidding of museum quality work. Auction proceeds support the AAW’s grant, outreach and educational programs.

Woodturning Trade Show Open to the public. Observe ongoing woodturning demonstrations. Survey state-of-the-art woodturning products, supplies, and more up close and in action.

Admission:

Registered symposium attendees: Free General public and non-registered symposium guests: $10

Charitable Initiatives Return to the Community: Buy a handcrafted woodturned bowl (or other turned item) for only $25 to raise money a local charity through the AAW’s Empty Bowls project. See the display of wooden boxes made by AAW members for children coping with serious illness through the nonprofit Beads of Courage program.

February 2016

`

Return to Page 1 Page 14 of 16

AAW's 30th Annual Meeting:

Demonstrations and Workshops

Something to See and

Something to Do

2 Bowls 2 Ways Abstracted Figure: Multi-Axis Adding Pizzazz with Texturing Tools Addition/Subtraction for Vessels An Inside Peek at Hollow Turning Barrel Form Baseball Bat Sfirri Style: Multi-Axis Beyond the Wooden Pen Box with Flowing Curves Christmas Ornament Cone Shaped Trinket Box Connecting Polymer Clay to the Pen World Contemporary Ladle Creating Unique Patinas Crock Rim Style Bowl Cutting the Best Bowl Blanks Deep Hollowing Designing and Turning Laminated Wood Embellish Your World! Exploring Ornamental Turning Chuck Flat Box Footed Vessel Functional Furniture from Cardboard Gilding Vessels Hand Painted Egg Ornaments With Finial Hand-Cut Barley Twist Hollow Turning How Dry and Finish Turn Roughed Out Bowls How to Turn a Trembleur How to Use an Eccentric Chuck Inner Rim Vessel Inspiration and Embellishment Making Lids More Interesting Mastering the Universal Cutting Frame

Multi-Axis Turning Need Some Relief? Open Segmented Turning Orbital Arc, The Beginning Pagoda Box Quick Little Boxes with a Skew Rain Drop Box Relief Carving and Texturing Roped Bowl Sand Carving Sculptural Stringed Instruments Segmented Bowl Construction Segmented Designs and All-Ons Segmented Feature Ring Design Sphering Around Spindle Turning Basics Spindle Turning with Routed Flutes Surface Design Tall 4-Piece Table Lamp TBD Texture Boxes The Aesthetics and Properties of Wood The Art of Turning Natural Edge Nested Sets The Slicing Angle Thinking Outside Of The Box Tree Ornament Tri-Pod Turned Mirrors-Big And Small Turning a Corrugated Cardboard Bowl Turning Outside the Box Turning with your Mind Using Hook Tools for Endgrain Hollowing Walking Cane with Off Set Handle Wooden Jewelry

February 2016

`

Return to Page 1 Page 15 of 16

11BWood Turning Sources

Many of you have asked about sources for wood turning lathes, accessories, supplies, etc. The following list not complete, however, this list will get you started and includes sources familiar to many other wood turners. Please forward any additions you would like to share for this list. Craft Supplies USA, “The Woodturners Catalog”, www.woodturnerscatalog.com

Offers a full range of wood turning lathes, accessories, tools, finishing supplies, turning kits, and instructional books and videos.

Hartville Tools www.hartvilletool.com/

Offers a full range of woodworking power equipment, hand tools, lathes, accessories, carving tools, and finishing supplies.

Klingspor’s Woodworking Shop, www.woodworkingshop.com

Offers a full range of woodworking power equipment, hand tools, lathes, accessories, carving tools, and finishing supplies. Noted for their abrasives.

Packard Woodworks Inc., www.packardwoodworks.com

Offers a full range of woodworking power equipment, hand tools, lathes, accessories, carving tools, finishing supplies, woodcraft kits, and instructional books and videos.

Penn State Industries Woodturning, www.pennstateind.com

Offers lathes, accessories, tools, equipment and turning kits. Noted for their supplies for pen turners.

Rockler Woodworking and Hardware, www.rockler.com

Offers a full range of woodworking

power equipment, hand tools, lathes, accessories, carving tools, finishing supplies, and woodcraft kits.

Treeline The Woodcraft Specialists, www.treeline.usa.com

Offers a full line of carving equipment, tools, and instructional books and videos. Focus is on the wood carver and wood turners adding embellishment to turnings.

Wood Carvers Supply, Inc., www.woodcarverssupply.com

Offers a full line of carving equipment, and tools. Focus is on the wood carver and wood turners adding embellishment to turnings.

Woodcraft Helping You Make Wood Work, www.woodcraft.com

Offers a full range of woodworking power equipment, hand tools, lathes, accessories, carving tools, finishing supplies, woodcraft kits, and instructional books and videos. Focus is on the general woodworker.

Rob Wallace’s Woodturning Links, www.public.iastate.edu/~rwallace/WTlinks.html

This website contains links to nearly 400 websites focused on woodturning. Enough to keep you up for several nights.

12BSupporters of North Valley Woodturners

We are beginning to attract the support of retailers that offer woodturning supplies and equipment. Hartville Tool, is offering a 10% discount on purchases when you identify yourself as a member of the North Valley Woodturners. Packard Woodworks Inc. is offering a 10% discount on purchases when you identify yourself as a member of the North Valley Woodturners.

February 2016

`

Return to Page 1 Page 16 of 16

13BNew/Returning Members The North Valley Woodturners is a growing woodturning club, now in our third year, located in the north valley of California. The North Valley Woodturners has been accepted as an affiliate of the American Association of Woodturners, the national association of woodturners. With access to the resources of the national organization we are able to extend the many benefits and resources which are available from that organization to our members. The North Valley Woodturners membership includes woodturners with a wide range of interests and abilities.

Our membership includes woodturners that are just beginning to explore their interest in woodturning as well as woodturners with many years of experience. In addition to monthly programs that address a wide range of topics in woodturning the club has developed a mentoring program to provide instruction and assistance to the beginning turner. If you are not a member and you wish to join the North Valley Woodturners club, Please complete the following membership information form and return it along with your annual dues at the next meeting. You may also mail the completed information form along with dues payment of $35 to the attention of: Gerald Letson, Treasurer, 357 Skyline Boulevard, Oroville, CA 95966.

Membership Information Name:________________________________________________________ Date:______________ (Last) (First) (M.I.)

Address:__________________________________________ City: _________________State:_____ Phone:_____________________ Cell:______________________ E-mail:_____________________ Woodturning Interests: _____________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ Skill Level: Never Turned:_____ Beginner:______ Intermediate:______ Advanced:________ Comments:______________________________________________________________________

________________________________________________________________________________ Submit this Application to the Club Treasurer along with dues of $35.00 at next meeting, or, mail to Gerald Letson, Treasurer, 357 Skyline Boulevard, Oroville, CA 95966