,federal,aviation'admjnistration .1r l'ctrttfuteshot peening mil s 13165c, ams-2430, use the...

UNITED STATES OF AMERICA

DE:PARTMENT OF TRAN'SPORTATION ,FEDERAL,AVIATION'ADMJNISTRATION

.1r_"l'Ctrttfute f~ OQTR977Y

:T~~~.~~ ATI AVIATIONSERVICES, LLC

,~~~~

12401'TAFT'AVENUE CL~VELAND,OHIO44108

~~dd~~·~·mad~ auddJ,~~dJ, :Y~~.~

~kdJ,.~~a?V~~, ~a

~~~.. a?V~ REPAIR STATION

auddJ,~~•• LIMITED LANDING GEAR

LIMITED SPECIALIZED SERVICES ,LIMITED· AIRFRAME

LIMITED NON-DESTRUCTIVE TESTING, ( 08/11/2005)

:Tk~,~·~~.~~

:dad~m #-d INDEFINITELY ~?~,~de,'~

~tde'~

MARCH 23, 2001

REISSUED AUGUST 11, 2005 J. GtfJ~~trttfitatt:~ not:1tfauftraIJ~ AND ANY 'MAJOR CHANGE,')f THE BASIC FACILmES, OR IN THE LOCATION THEREOF, SHALL'BE IMMEDIATELY REPORTED TO THE APPROPRIATE REGIONAL O~CE OF THE FEDERAL AVIATION ADMINISTRATION

Any alteration of this certificate is punishable by aJim! ofnot exceeding $1,000, or imprisonment not exceeding 3 yearsl:·ijr· bath

FAA Form 8000-4 (1-67) SUPERSEDES FAA FORM 390. AFSElectronic FormsSystem - v2.2

U.s. Department· of Transportation Federal Aviation Operations Specifications Administration

001 Issuance and Applicability

002 Definitions and Abbreviations

003 Ratings and Limitations

004 S~~m~ry of Special Authorizations and Limitations : .

007 Designated Persons

449 Antidrug and Alcohol Misuse Prevention Program ;

Table of Contents

Part A

HQCONTROL DATE

01/31/2012

01112/2012

01/30/2004

09/23/1998

12/19/2006 .

07/17/2009

EFFECTIVE DATE

01/23/2015

10/01/2012

09/02/2015

01/23/2015

06/27/20.1 I

01/23/2015

AMENDMENT NUMBER

10

5

35

7

8

4

ATI Aviation Services LLC Part A-I \ Certificate No.: OQTR977Y PrintDate: 9/212015

'I

u.s. Department of Transportation Federal Aviation Operations SpecificationsAdministration

Tableof'Contents

PartD

HQ CONTROL EFFECTIVE AMENDMENT DATE DATE NUMBER.

100Work to be Performed at a Place Other Than the RepairStationFixed Loealion(s) 1111,6/2004 06/1912012 2

Part D...l Certifi~ate No,: OQ~77YAn Aviation 'Services LLC' PrintDate~4/7/2014

U.S. Department. of Transportation Federal Aviation

Operations Specifications Administration

A001 • Issuance and Applieabnity\ HQ Control: 01/31/2012 HQ Revision: 05d

a. These operationsspecifications are issuedto AT!. AviationServices LLC, a Repair Station located in the United States,pursuant to 14 CPR. Part 145,§.145.53. Therepairstationcertificate holdershall conductoperations in accordance with 14CFRPart 145 and theseoperations specifications.

The certificate holder's address:

FixedLocation: Mailing Address: 12401 Taft 12401 Taft Cleveland, Ohio44108 Cleveland, Ohio44108

b. .The holderof these operations specifications is the holderof certificate number OQTR977Y and shall hereafterbe referredto as the "certificate holder".

c. . These operations specificationsare issued as part of this repair stationcertificate and are in effect as of the date approval is effective, Thiscertificate and theseoperations specifications shal.] remain in effectuntil the certificate for a repair stationthat is locatedin the UnitedStatesis surrendered, suspended, or revoked.

d. The repairstation specifiedon these operations specifications and locatedwithinthe United States performs maintenance and/or an alterationof aircraftand/oraeronautical productsto be installedon aircraftunder the terms andconditions of the U.S.JEC SafetyAgreement, Annex2, Maintenance, between the FAA and the BC.

e. The certificate holderis authorized to'use only the businessnamewhichappears on the certificateto conduct the 'operations described in subparagraph a.

Delegated authorities: None

AT! AviationServicesLLC AOO!..l Certificate No.: OQTR977Y Arndt. No: 10

u.s. Department of Transportation Federal Aviation


ADOt • Issuance and ApplicabUtty , HQ CODtrot: 01/31/2012

HQ Revision: OSd

a.. These operationsspecifications are issuedto ATI AviationServicesLLC, a RepairStation located in the UnitedStates,pursuant to 14CFRPart l45,§ 145.53. Therepairstationcertificate holdershall conductoperations in accordance with 14CFRPart 145and theseoperations ,. specifications.

The certificateholder's address:

FixedLocation: Mailing Address: 12401 Taft 12401 Taft Cleveland,Ohio 44108 Cleveland, Ohio44108

b. The holderof these operationsspecitlcations is the holderof certificate numberOQTR977Y and shall hereafterbe referred to as the "certificate holder".

c. These operationsspecifications areissuedas part of this repair stationcertificateand are in effect as of the date approvalis effective. This certificate and theseoperations specifications shall remain in effectuntil the certificate for a repairstationthat is locatedin the UnitedStatesis surrendered, suspended, or revoked.

d. The repairstation specified on these.operations specifications and locatedwithinthe United Statesperformsmaintenance and/oran alterationof aircraftand/oraeronautical productsto be installedon aircraftunder the terms andconditions of theU.S./EC SafetyAgreement, Annex2, Maintenance, between the FAA and the BC.

e. The certificateholderis authorized to'use only the businessnamewhichappears on the certificateto conductthe operations described in subparagraph a.

Delegated authorities: None

AT! AviationServicesLLC AOOl·l Certificate No.: OQTR977Y Arndt. No: 10

U.S. Department of Transportation Federal Aviation OperationsSpecifications Administration

I. Issued by the Federal AviationAdministration. 2. These Operations Specifications are approved by direction of the Administrator.

Digitally signedby ArnoldWolfe, Principal Maintenance Inspector (GL25) [1] EFFECTIVE DATE: 112312015, [2] AMENDMENT #: 10 DATE: 2015.01.23 07:39:04 -06:00

3.I hereby accept and receive the Operations Specificationsin this paragraph.

. . . 0/,·23-2.016

Ai-'Sh-,-T....imothy, Di ctor o;:;;ty Date ~

An Aviation Services LLC AOOI·2 CertificateNo.: OQTR977Y Arndt.No: 10

U.S.Department of Transportation Federal Aviation

Operations SpecificationsAdministration

A002 . Definitions and Abbreviations HQ Control: 01/12/2012

. HQ Revision: OSb . .

Unless otherwise defined in theseoperetions specifications,all words,phrases, definitions,and. - abbreviations haveidentical meanings to those usedin 14CPRand49 U.S.C., ascitedin Public Law

)03...272, as amended. Additionally, the definitions listed belowareapplicable to operations conducted in accordance.withtbes~ operations specificetions..

RASA

Certificate Holder

CFR

Class rating:-,

EASA .

EASA Accounta~le Manager

ExeDlptlon

FAA Accountable Manager

Geographic Authorization

TheBilateral Aviation Safety Agreement (BASA) is an executive. agreement concluded between the United States andaforeign country forthe purpose of promoting aviation.safety; alsoknown as an Agreement for thePromotion of Aviation Safety. .

.In these operations specifications,' theterm"certificate holder" means .thehold~ of the repair station certificate described in these operations .speciflcatjons in Part A paragraph. AOOI andany of its officers, employees, or agents used in theconduct of operations under this certificate.

Codeof Federal Regulations

·As usedwithrespectto thecertification, ratings, privileges, and IimitaQ,OD ofaircraft within a category having sjmilar operating characteristics.

Europ~an Aviation Safety Agency

- Themanager wbobas corporate authority for ensuringthat all maintenaaee required by thecustomer canbefinanced andcarriedout to the.standard required by th~ EASA full...member Authority. .

An- authorization thatpermits an alternate means of compliance witha specific CPR. Theexemption mustmeettheprocedural requirements of 14 Cp:a Part 11.

·A· person designated by thecertificated repairstation whois responsible for andhasauthority overall-repair station operations that areconducted under 14CPRPart 145,including ensuring that the repairstation's personnel follow. the regqlationsand serving.as the primary contact.with the FAA.

. Ap approval provided to a repairstation located outside the United States to perfonilmaintenance support undercontract for a U.S. air carrier(or an operator of U.S.- registered aircraft under 14 CFR Part 129)at a location otherthan therepair station facility. A geographic authorization is issued by the FAA. to respond to a U.S. air. , carriers or Part 129 foreign operator's needfor maintenance at a stationwhere the frequency and scopeof thatmaintenance does not

ATI Aviation Services LLC A002..l Certificate No.: OQTR977Y

U.S.Department of TranspOrtation Federal 'Aviation


LImited Rating

Limited Ratings Specialized Services

Line Maintenanee

MAG

.Maintenanee

uszsc Aviation Safety Agre~Dlent, Annex 2, Maintenance

MIP

MOE

Preventive Maintenance

.QCM

Repair Station located in tbe United States

Repair Station located outside the United States

RS:M;

warrant permanently staffing'andequipping the stationfor its acc~plishment. .

A r~iDg issuedto repairstations for theperformance ofmaintenance onparticular makes andmodels.ofairframes, powerplants, propellers, radios, iusuuments, accessories, and/or parts.

Rating issued for a special maintenance function whenthe function is performed in accordance' withaspecification approved by the Administrator.

Any unscheduled maintenance resulting fromunforeseen events, or scheduled checks where certainservicing and/or inspections do not require specialised training, equipment, or facilities.

TheMaintenance Annex Guidance (MAG) defines theprocessthat theFM andEASA undertake in the inspection, findings of compliance certification, andmonitoring of repair statioDS, as wellas theirj~int cooperation inquality··'assurance andstandardization activities' in support of the Agreement, Annex2, Maintenance.:

The inspection, overhaul, repair, preservation, andreplacement of parts,but excludes preventive maintenance.

Annex2 covers the reciprocal acceptance of findings of compliance, approyals, documentation and technical assistance regarding approvals and the moni~ng ofrepair stations/maintenance organizations.

Maititenance Implementation Procedures (MIP) are procedures for implementing the provisions of a BASA that ~pply to maint~nance.

A maintenance organization exposition (MOE) pertains to EA,SA member countries ~at use allMOEin placeof a Repair Station Manual (RSM) anda Quality Control Manual (QCM).

As definedin .J4CFRpart 1 and part 43 appendix ~ subparagraph (c). .

QualityControl Manual

A certificated repairstation locatedin the UnitedStates. . . .

A certificated repairstation located outside of theUnitedStates.

Repair: Station Manual

. Certificate No.: OQTR977YATI Aviation Services·LLC· A002-2



1. Issuedby theFederal AviatiOJ;l Administration. , 2. TheseOperations Specifications are approved by directionoftbe Administrator.''',, . D,i,gitallYsignedb,Y DavidG, Lindsey, Principal Maintenance Inspector,(GL2S)

[1]EFFECTIVE DATE: 1~/1/2012, [2] AMENDMENT #: 5 , . DATE: 2012.10.01 08:32:06 -05:00I)

I,,-a...zo/~

DateFurillo, Nichol

3. I hereby accept andreceive theOperations_Specifications in thisparagraph.

Certificate No.:OQTR977YATIAviation Services LLC A002-3

U.S. Department of Transportation Federal Aviation Operations Specifications Administration

A003 . Ratings and Limitations HQ Control: 01/30/2004 HQ Revision: 010

The Certificate Holder is authorized the following Ratings and/orLimitations:

Class Ratings None authorized

Limited Ratin2s

Ratio2 Manufacturer Make/Model Limitations Landing Gear From the accepted From the accepted Limited to inspection, repair and Components Capability List, as Capability List, 'as overhaul in accordance with

amended. amended. manufactures approved data or other FAA approved data.

Airframe Boeing 727 PIN 65-41332-1 Toggle Limited to inspection, repair and 727PIN6541333-1 Toggle overhaul in accordance with MD-83PIN 5935848.;.1 manufactures approved data or other FixedSide Link FAA approved data. MD-83PIN 5935848-50 I . FixedSide Link 737 PIN 65C27409-26

Nondestructive Magnetic Particle ASTM-E-1444, MILSTO In accordance with American Society Inspection, Testing, Inspection . 1907, Messier-Dowty for Testing and Materials (ASTM) and Processing PCS-3100 & 32-09-01 SpecificationE-I444, MILSTD 19070r

section 42 other FAA approved data.

Liquid Penetrant ASTM-E-1417, MILSTO In accordance with American Society Inspection 1907,Messier-Dowry for Testing and Materials (ASTM)

PCS-3002 & 32-09-01 SpecificationE-1417, MILSrD 19070r section 38 other FAA approved data.

Nital Etch AMS2649, PCS-3600. In accordance with Aerospace Material Specification 2649, Boeing SOPM20-10-02, Messier-Dowty3209-01- section.43and PCS-3600 or other FAA approved data.

Limited Ratings - Specialized Services

Rating Specifications Limitations Shot Peening MIL S 13165C, AMS-2430, Use the methods, techniques, and practices prescribed

Messier-Dowty PCS-2300 & 32 in the current manufacturers maintenance manual or 09-01 section 16 Instructions for Continued Airworthiness, or other

methods, techniques, and practices acceptable to the Administrator. .

NickelSulfamate MIL-STD-868, AMS2424, Use the methods, techniques, and practices prescribed Plating Messier-Dowty PCS...2120& 32 in the current manufacturers maintenance manual or

09-01 section 5 Instructions for Continued Airworthiness, or other

ATI AviationServicesLLC A003-1 Certificate No.: OQTR977Y Arndt. No: 35

U.S. Department of Transportation Federal Aviat ion OperationsSpecifications Admin istration

Rating

Cadmium Plating (Low Embrittlement)

Stylus Cadmium Plate

Chromium Plating

Alodine 1200S

Specifications

MIL-STD-870, AMS QQ-P-416, AMS 2401, Messier-Dowty PCS2 100 and PCS-2101 & 32-09-01 section 3

MIL STD 865, AMS 2451

MIL-STD-1501, AMS QQ-C-320, AMS 2460 , AMS 2406, MessierDowty PCS-2110 & 32-09-01 section 2

MIL-DTL-5441, MIL DTL 81706

Limitations methods, techniques, and practices acceptable to the Adm inistrator.

Use the methods, techniques, and practices prescribed in the current manufacturers maintenance manual or Instructions for Continued Airworthiness, or other methods, techniques, and practices acceptable to the Administrator.

Use the methods, techn iques, and practices prescribed in the current manufacturers maintenance manual or ' Instructions for Continued Airworthiness, or other methods, techniques, and practices acceptable to the Administrator.

Use the methods, techniques, and practices prescribed .in the current manufacturers maintenance manual or Instructions for Continued Airworthiness, or other methods, techniques, and practices acc eptable to the Administrator. .

Use the methods, techniques, and practices prescribed in the current manufacturers maintenance manual or Instructions for Continued Airworthiness, or other methods, techniques, and practices acceptable to the Adm inistrator.

1.The CertificateHolder applies for the Operationsin this paragraph. 2. These Operations Specifications.are approvedby direction of the Administrator.

Digitally signed by ArnoldWolfe, Principal Maintenance Inspector (GL25) (I] EFFECTIVE DATE : 9/212015, (2] AMENDMENT #: 35 DATE: 2015 .09.0206:16:05 -05:00

3: I hereby accept and receive the Operations Specifications in this paragraph.

f~::tl/()iag ()q-O~ -;)..,0/5 Date

AII Aviation Services LLC A003-2 CertificateNo.: OQTR977Y Arndt. No: 35

U.S.·Department of Transportation Federal Aviation

OperationsSpecifications Administration

A004 • Summary of Special Authorizations and Limitations HQ Control: 09/23/1998

HQ Revision: 010

a. The certificate holder,in accordance with the reference paragraphs, is authorized to:

Reference

\ Paragraphs

Conductoperations choosingto have an antidrugatl:d alcoholmisuseprevention A449 program.

Conductoperations choosing to haveanantidrugand alcoholmisuseprevention A449 program.

pe:ro~ work,~xcluding ~ntinuous operations, at 'additional locations otherthan DIOO at Its primary FJXed Location.

b. The eertifleate bolder is not authorized and shallnot:

Reference Paragraphs

Use Exemptions. A005

Use an approv~d elecf:t"0nic recordkeeping system, electronic/digital signature, A025 and/or electronic media. Perform maintenance with ~AA ratingswhere the scope ofwork is authorized A060 by a BASAIMIP. Pe~o~ work, including.continuoUs operations, at additional locations other than AIOI at Itspnmary fixed location. Perform maintenance in accordancewith foreign repair station geographic B050authorizations. Perform line maintenance for cert, holders conducting operationsunder Parts 121 and 135 and for foreign carriers/persons operatingU.S. registered aircraft in D107 commoncarriageunder Part 129,apart from DIDO whichauthorizes that work away from station.

ATI AviationServices LLC A004-1 CertificateN0.:· OQTR977Y Arndt.No: 7

U.S. Department of Transportation Federal Aviation


I . Issued by the Federal Aviation Administration. 2. These Operations Specifications are approved by direction of the Administrator.

Digitally signed by Arnold Wolfe, Principal Maintenance Irspector (GL25) [I] EFFECTIVE DATE ; 1/23/2015, [2] AMENDMENT#: 7 DATE: 2015.01.23 07:37:41-06:00

3. I herebyaccept and receive the Operations Specifications in this paragraph.

Ol-23 ~,t()IS~aMl nthv, D ej Date

Certificate No.: OQTR977Y ATI AviationServicesLLC A004-2 Arndt. No: 7

U.s. Department of transportation Federal Aviation Operations SpecificationsAdministration

A007 • Designated PerS'ODS HQ Control: 12/19/200' HQ Revision: 030

a.The personnel listedin the following tablearedesignated to officially apply for andreceive operations specificanons forthe certificate holder indicated below,

Table 1 - Designated Persons to Apply for and Receive Authorizations Title NlDle Parts Authorized

FAA Accountable Managerf 145 IV.P..of Engineering, Operations Furlllo, Nicholas AJ)

Chief Inspector I Director ofQuality Aisb,·Timothy A,D.

b. Thefollowing personnel listedin Table2 are designated by the certificate holderto receive Information forOperators (INFO)messages for the certificate holder as indicated below,A.receipt for the information by an operator or person is not requited. »: ,

tai:sh..ati@ roadf~et.com . ' ALL

1. Issuedbythe FederalAviation Administration. 2. Supportinfmnation reference: . . 3. These Operanons Specifications areapproved bydirection of the Adininistrator.

• 201.1.06.2708:13:17 CentralDaylightTime Location:WebOPSS

, Digifatlysignedby DavidG Lindsey, , Principal Maintenance Inspector (GUS)

4. DateApproval is effective: 06/27/2011 Amendment Number: S 5. I hereby acceptand receivetheOperations Specifications in this paragraph. .

Furi1101 Nicholas, V.P.of Engineering~ Operations

""'\

Date: 06127/20II

PrintDate:6/27/2011 AO07...1 Certific~te No.:OQTR,977Y ATI Aviation Services LLC



A449 . Antidrug' and Aleohol Misuse Prevention Program HQ Control: 07/17/2009

HQ Revision: OOa

a. The Part 145 repairstationcertificate holderhas electedto implement an Antidrug and Alcohol MisusePrevention Program, becausethe certificate holderperforms safety-sensitive functions for a 14 CFR Part 121, and 135certificate holderand/orfor a 14 CPRPart 91 operator conducting operations under Section91.147.

b. The certificate holdercertifies that. it will comply with the requirements of 14 CFRPart 120 and 49 CFR Part 40 for its Antidrug and Alcohol Misuse Prevention Program.

c. Antidrug and Alcohol MisusePrevention Program records are maintained and availablefor inspection by the FAA9s Drug Abatement Compliance and Enforcement Inspectors at the location listed in Table 1 below:

Table 1 Location & Telephone of Antidrug and Alcohol-Misuse

Prevention Program Records:

Telephone Number: A1216-268-4888 Address: 12401 Taft Ave. Address: N/A

City: Cleveland State: OH

Zipeode: 44108

d. Limitations and Provisions.

(1) Antidrug and Alcohol Misuse Prevention Program inspections and enforcement activity willbe conducted by the DrugAbatement Division. Questions regarding these programs shouldbe directedto the DrugAbatement Division.

(2) The certificate holder is.responsible for updating this operations specification whenany of the following changes occur: (a) Location or phonenumberwherethe Antidrug andAlcohol Misuse Prevention

Program Recordsare kept. . (b) If the certificate holder's numberof safety-sensitive employees goes to 50 and

above, or fallsbelow50safety..sensitive employees. (3) The certificate holderwith 50 or more employees performing a safety-sensitive

function on January 1 ofthe calendar yearmust submitanannual reportto theDrug Abatement Division of the FAA.

(4) Thecertificate holderwith fewer than 50 employees performing a safety-sensitive function on January 1 of ~y calendar year must submitan annualreportupon request of the Administrator, as'specified in the regulations.

The certificate holderhas 50 or more safety-sensitive employees.

ATI Aviation Services LLC A449-1 Certificate No.: OQTR977Y Amdt.No:4

U.S. Department of Transportation Federal Aviation


1. Issuedby theFederalAviation Administration. 2. These Operations Specifications are approved by direction of the Administrator.

Digitally signed by Arnold Wolfe, Principal Maintenance Inspector (GL25) (1] EFFECTIVE DATE: '1/2312015, (2) AMENDMENT#: 4 DATE: 2015.01.23 07:3~:09 -06:00

3. I hereby acceptandreceive the Operations Specifications in thisparagraph.

or· 23-201S.-1~ ard . \

Date

Certificate No.: OQTR977Y AT! AviationServicesLLC A449-2 Arndt. No: 4

u.s. Department of Transportation Federal Aviation Operations SpecificationsAdministration

DI00 • Work to be Performed at a'Place .Other Than the Repair HQ Control: 11/16/2004 Station Fixed Location!s} HQ Revision: 050

a. The certificate holdermay perform workat a placeother than itsFixed Location (as listedin paragraph AOOl, and peragraphA101 if issued, of theseoperations specifications) provided it . has the facilities,material, equipment and technical personnelto perform the work authorized in the following table.

Table 1

Work Authorized Repair Stations Manual Qualty Control Manual References References

Asautherized in A03 ATIQCM7.24 ATI QCM·7.24

b. The certificate boldermay notperfonn continuous operation at a facilityotherthan the station'sFixedLocation listedin paragraph A001, andparagraph AIOl ifissued.

c. Litie Stations. Privileges of a line station, as set forthby the EASAcertificate and scopeof workandlocatedwithinthe country wherethemain facility is domiciled are listedin Table 1 are authorized ..

d. Workmaybe due to a specialcircumstance or on a recurringbasis. Ifon a recurringbasis,the repairstationmust haveprocedures in.itsmanual.

PrintDate;6/19/2012 D100-1 Certificate N04: OQTR977Y ATI Aviation ServicesLl.C

u.s. Department of Transportation Federal Aviation . Operations SpecificationsAdministration

1. Issued by theFederal Aviation Administration. 2. Support' infotmarion reference: 3. TheseOperations Specifications are approved bydirection of theAclministr~or.

• 2012.06.:19 10;45;41Central DaylighC. Time Location; WebOPSS :OigitaUy signed by David G Llndsey, Prineipnl Maintenance Inspector (GL25)

4. DateApproval is effective:· 06/19/2012 Amendment Nwnber: 2 5. I hereby accept an~ receive the Operations Specifications in this paragraph.

Aish, Timothy, Director ofQuality

Date: 0611912012~!kl

DI00-2 Certificate No.:OQTR.977YPrintDate:611912012 ATIAviation Services LLC

ATI Aviation Services, LLC. 1/3 Certificate Number: OQTR977Y

Capability List

Manufacturer: Boeing - Landing Gear Only Make/Model: 707P/N: AliI 727 PIN: AliI 737 PlN: AliI 747 PIN: AliI 757 PIN: AliI 767 PIN: AliI

777 P!N:293W3153-11 161W1211-11293W3703-3 747 non-landing gear part no.is: 65B02083-101 65B02083-14 767 non-landing gear part no/s: 113T1210-11113T1341-31113T1341-41113T1228-21 113T1216-3/-4

Limitations: Limited to inspection, repair and overhaul in accordance with manufactures approved data or other FAAapproved data.

Manufacturer: Douglas- Landing Gear Only Make/Model: OC-8 PIN: AliI OC-9 PIN: AliI MO-80 P!N:AIII OC-10 PIN: AliI MO;.11 PIN: All limitations: limited to inspection, repair and overhaul in accordance with manufactures

approved data or other FAAapproved data.

Manufacturer: Lockheed - Landing-Gear Only Make/Model:L-1011 PIN: All Limitations: Limited to Inspection, repair and overhaul in accordance with manufactures

approved data or other FAA approved data.

Manufacturer: Beechjet - Landing Gear Only Make/Model: B200 PIN: All Limitations: Limited to inspection, repair and overhaul in accordance with manufactures


Make/Model: HB400 PIN: 46010-15146105-27146120-271128-820031-91128-820023-91128810037-3/-4145229-5146033-9146035-31/-33146115-511128-820024-21/-23146020145033-71 128-820044-6031128-810035-1/-21128-820025-1 Limitations: Limited to inspection, repair and overhaul in accordance with manufactures


Manufacturer: Saab - Landing Gear Only Make/Model: 340 PIN: 13023811302301130220112940811292201127380112731011273081

127304/123994/123738/123732/1235201 123410/1234001122310/123300/7227151-6211 12403~ 123864/12386~123308f1252381 125239 Limitations: Limited to inspection, repair and overhaul in accordance with manufactures

approved data or other FAAapproved data.

ATI Aviation Services, LLC. 2/3 Certificate Number: OQTR977Y

Capability List: Continued

Manufacturer: Airbus - Landing Gear Only Make/Model: A320 PIN: 201160302, 201371302, D65236,321-420~103,059473-1, 321420203-~ D59422-1~ 11419363~ 11419361~ 11419364L201590900, 11419360L282841-3, 1FA1401228, 321-420-103-6, 321-420-203-6, 1211175-231, 200877682, D56800-1, D57251-1, D57261,D6207~056804,D56788-3

Limitations: Limited to inspection, repair and overhaul in accordance with manufactures approved data or other FAA approved data.

Manufacturer: British Aerospace - Landing Gear Only Make/Model: HP-137 Jetstream PIN: 100A703028/29, 101A703041 Limitations: Limited to inspection, repair and overhaul in accordance with manufactures


Manufacturer: Triumph Group - Landing Gear Only Make/Model: Triumph PIN: 1FA1401228, 1FA1401243 Limitations: Limited to inspection, repair and overhaul in accordance with manufactures


Manufacturer: Embraer - Landing Gear Only Make/Model: ERJ 145 PIN: 2309-2006, 2309-3040-001, 2309-2040-001, 2309-2032-001,

2309-2056-001, 2309-3032-003, 2309-3032-005, 2309-3515-001, 2309-3710-001, 2309-2014, 2309~3006, 2309-2055-003 Limitations: Limited to inspection, repair and overhaul in accordance with manufactures


Manufacturer: Messier-Dowty - Landing Gear Only Make/Model: CRJ PIN: 16122-1, 17014~3, 17050-1, 16129-1, 16164-1,17207-1 Limitations: Limited to inspection, repair and overhaul in accordance with manufactures


ATI Aviation Services, LLC. 3/3

Capability List: Continued

Manufacturer: ATR - Landing Gear Only Make/Model: ATR-600 PIN: D64441,.D60999-1, D61000, D60980-1 Make/Model: ATR-42/500 PIN: 17041-3 Make/Model: ATR-72 PIN: D63768, D63817, D63820


Manufacturer: Bombardier - Landing Gear Only

Make/Model: Global Express PIN: GW318-·1001-3/-4{LH/RH MLG Assy.), 21410-103 (MLG Trailing Arm), GW312-2001-7 (MLG Side Brace Assy.), 22500-105 (NLG Drag Brace Assy), GW311- 1100-17 (NLG Assy.), 1286-0101 (NLG Main Fitting), GM147-0151-1, GM147-0152-2, 21410-105


Make/Model: Lear 60 PIN: 266-0807-507 Limitations: Limited to inspection, repair and overhaul in accordance with manufactures


Make/Model: Challenger 600 PIN: 600-10237-5, 200-809694, 6329-3, 200811308

Make/Model: Challenger 604 PIN: 200811218 Limitations: Limited to inspection,repair and overhaul in accordance w1th manufactures


Manufacturer: Gulfstream Aerospace Landing Gear Only

Make/Model: Gulfstream Commander 690 PIN: ED12443, ED12530, ED10145 Limitations: Limited to inspection, repair and overhaul in accordance with manufactures approved data or other FAA approved data.

1) These Operations Specifications are reviewed and approved by the ATIAviation

Services, LLC., Accountable Manager and Director of Quality.

2) I hereby accept this Capability List:

~

r of Quality Date: 3..;8-16

,federal,aviation'admjnistration .1r l'ctrttfuteshot peening mil s 13165c, ams-2430, use the...

Documents