fenixen masterbatches

polimeri.bg 1

Продуктовата гама фениксен включва в състава си мастербачи, филери (CaCO3) и добавки.

Тези продукти са разработвани повече от 5 години в заводите и лабораториите на Мегапорт феникс Пластик и Полимери България в градовете софия, Велико Търново и Търговище. натрупаният опит през този период ни дава основание да вярваме, че тези продукти могат да са добър помощник във вашето производство. имаме възможност да тестваме и произвеждаме мастербачи по мостра на клиента или според спецификация на клиента, с гарантирано качество на крайния продукт.

Fenixen product portfolio by incorporating masterbatches, fillers (CaCO3) and additives. These products have been developed for over

5 years in factories and laboratories Megaport Fenixen Plastic and Polymers Bulgaria in Sofia, Veliko Tarnovo and Targovishte. The experience gained during this period gives us reason to believe that these products can be a good assistant in your production.We are capable of testing and producing masterbatches using customer’s sample or according to customer’s specification, with guaranteed quality of the final product.

polimeri.bg 2

Всички фолиа в този каталог са с дебелина 50 микрона и съдържание от 95% LDPe и 5% от съответния продукт. изключение правят артикулите от група фениксен филер, там рецептата е отразена на съответната страница.

All films in this catalog are 50 microns and content of 95% LDPe and 5% of the product. exceptions are items from Fenixen FiLLer, there recipe is reflected on the page.

polimeri.bg

съдържание /COnTenT

Бели мастербачи .................................................................................................... 4 White masterbatches

черни мастербачи ................................................................................................. 9 BLACk masterbatches

цВеТни мастербачи ............................................................................................. 18 COLOr masterbatches

филер (CaCO3) ...................................................................................................... 28

FiLLer (CaCO3)

доБаВки ................................................................................................................ 37 аDDiTiVe

polimeri.bg 4

фениксен Бяло включва в състава си до 70% титаниев диоксид. В зависимост от процентното съотношение на белия мастербач се влага от 1% до 5% за постигане на желаната белота. основното предназначение е за тънки изделия от LDPe, HDPe и PP. носителят е LLDPe. Бялата гама във фениксен серията покрива пълните нужди за екструдиране на фолио и леене под налягане, бластване и ротационно леене. фениксен Бяло предлага артикули с до 70% основен пигмент.

WHiTe Fenixen by incorporating up to 70% titanium dioxide. Depending on the percentage of the pigment in the white masterbatch must be applied from 1% to 5% to achive the desired brightness in the final product. The main application is to thin products LDPe, HDPe, PP. The carrier is LLDPe. White range in Fenixen series covers the full needs for film extrusion and injection molding, blow molding and rotational molding. WHiTe Fenixen offers products with up to 70%, the main pigment.

polimeri.bg 5

Properties Specifications Range MethodPackaging & Storage

Food Approval

ApplicationsThe product is recommended

for use in the following applications*:

FW140

Carrier ResinLLDPE

(MFI 3 gr/10 min)Dispertions at

200 mesh (bar)< 6,0 OEE-8.2.4-01-08

The product comes in

regular pellet form and packed in

25 kg bags. The bags must be stored

indoors for a maximum of 12 month and in dry environ-ment of

approximate-ly 25ºC.

Fenixen FW140 is food

approved in conform.

This masterbatch offers a

convenient way to incorporate TiO

2

in thermoplastic, without dust con-tamination. It has prefect dispersion

and optimized flow properties,

resulting to maximum hiding power and easy processing. The product packag-ing specification

is 25 kg (with tolerance

limit of +/-100gr).

Blow Moulding: +

PigmentTitanium Dioxide

(40% TiO2)

Total Inorganic Content (%)

39.00 ± 2.28 OEE-8.2.4-01-06 Film/Sheet: +

Pigment Types Rutile Coated Volatile Content (%) <0.20 OEE-8.2.4-01-07 Injection Moulding: +Undertone Milky Bulk Density (gr/cm3) 1.110-1.210 ASTM D1895 Tapes: o

Other Additives No Pellet Visual Inspection Yes Thin Films: +

FW150

Carrier ResinLLDPE


200 mesh (bar)< 5,0 OEE-8.2.4-01-08



Blow Moulding: +


(50% TiO2)


49.00 ± 2.25 OEE-8.2.4-01-06 Film/Sheet: +



FW150

Carrier ResinLLDPE


200 mesh (bar)< 2,0 OEE-8.2.4-01-08



Blow Moulding: +


(70% TiO2)


70.00 ± 2.10 OEE-8.2.4-01-06 Film/Sheet: +



Notes:The above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.

* Legend: +: Recomended, o: Can be used x: Not Recomended

polimeri.bg 6

FW 140

Пигмент TiO2

Pigment Titanium Dioxide

Носител LLDPe

Carrier resin

Съдържание 40%

Pigment content

Приложение: FW 140 притежава префектна дисперсия и оптимизирани свойства на течливост, в резултат на максимална покривност и лесен за обработка.

Application: FW 140 has a perfect dispersion and optimized flow properties, resulting in a maximum coverage and easy processing.

polimeri.bg 7

FW 150

Пигмент TiO2



Carrier resin


Pigment content



polimeri.bg 8

FW 170

Пигмент TiO2



Carrier resin


Pigment content



polimeri.bg 9

фениксен е разработила стандартна гама от черни мастербачи, базирани на универсални

полимери. фениксен черно включва в състава си CaCo3, който придава висок коефициент

на UV защита и го прави безопасен при контакт с храна. освен стандартен набор от черни мастербачи, ние предлагаме и персонализирани - според нуждите на клиента.

Fenixen has developed a standard range of black masterbatches based on universal polymers. Fenixen BLACk by incorporating CaCo3,

which gives a high degree of UV protection and makes it safe for food contact. Besides the standard range of black masterbatches, we also offer custom - according to customer needs.

polimeri.bg 10


Food Approval



FB1325A

Carrier ResinLLDPE

(MFI 3gr/10min)Dispertions at

200 mesh (bar)< 5,0 OEE-8.2.4-01-08


regular pellet form and packed in 25 kg

bags. The bags must be stored

indoors for a maximum of 12 month and in dry

environment of ap-

proximately 25ºC.

Fenixen FB1325A is not food approved.


convenient way to incorporate

Carbon Black in thermoplastic,

without dust con-tamination. It has prefect dispersion



is 25 kg (with tolerance limit of

+/-100 gr).

Blow Moulding: +

PigmentCarbon Black (25% CaCo

3)

Bulk Density (%) 0.640 - 0.690 ASTM D1895 Film/Sheet: +

Pigment TypesRCF (particle size

26-29nm)Volatile Content (%) <0.20 OEE-8.2.4-01-07

Injection Moulding: +Tapes: o


FB1325B

Carrier ResinLLDPE

(MFI 3gr/10min)Dispertions at 200mesh

(bar) < 5,0 OEE-8.2.4-01-08

Fenixen FB1325B is not food approved.

Blow Moulding: +


3)






FB1325C

Carrier Resin LLDPE

(MFI 3gr/10min)Dispertions at 200mesh

(bar) < 5,0 OEE-8.2.4-01-08

Fenixen FB1325C is not food approved.

Blow Moulding: +


3)








polimeri.bg 11


Food Approval



FB1340A

Carrier ResinLLDPE


200 mesh (bar)< 5,0 OEE-8.2.4-01-08


regular pellet form and packed in 25 kg

bags. The bags must be stored


environment of ap-

proximately 25ºC

Fenixen FB1340A is not food approved.


convenient way to incorporate

Carbon Black in thermoplastic,

without dust con-tamination. It has prefect dispersion



is 25 kg (with tolerance limit of

+/-100 gr).

Blow Moulding: +


3)


Pigment TypesHAF (particle size

27-30nm)Volatile Content (%) 65+/-1.95 OEE-8.2.4-01-07



FB1325B

Carrier ResinLLDPE


200 mesh (bar)< 5,0 OEE-8.2.4-01-08

Fenixen FB1340B is not food approved.

Blow Moulding: +


3)






FB1325C

Carrier ResinLLDPE


200 mesh (bar)< 5,0 OEE-8.2.4-01-08

Fenixen FB1340C is not food approved.

Blow Moulding: +


3)








polimeri.bg 12

FB 1325 A

Пигмент CaCO3

Pigment Carbon Black


Carrier resin


Pigment content

Приложение: FB 1325 A включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства

на течливост, в резултат на максимална покривност и лесен за обработка.

Application: FB 1325 A comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,

resulting in a maximum coverage and easy processing.

polimeri.bg 13

FB 1325 B



Носител reLLDPe

Carrier resin


Pigment content

Приложение: FB 1325 B включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства


Application: FB 1325 B comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,


polimeri.bg 14

FB 1325 C

Приложение: FB 1325 C включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства


Application: FB 1325 C comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,




Носител color reLLDPe

Carrier resin


Pigment content

polimeri.bg 15

FB 1340 A




Carrier resin


Pigment content

Приложение: FB 1340 A включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства


Application: FB 1340 A comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,


polimeri.bg 16

FB 1340 B

Приложение: FB 1340 B включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства


Application: FB 1340 B comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,





Carrier resin


Pigment content

polimeri.bg 17

FB 1340 C

Приложение: FB 1340 C включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства


Application: FB 1340 C comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,




Носител color reLLDPe

Carrier resin


Pigment content

polimeri.bg 18

With the active color database and accurate color matching spectrophotometer Fenixen is recognized by its clients when it comes to product safety and stricter regulatory requirements. Fenixen ensure that any ingredient which may lead to the formation of free radicals or modify the odor or taste of the finished product is eliminated from the ingredients in the production of color masterbatches.

с активена цветова база данни и точно цветово съответствие със спектрофотометър фениксен е признат от своите клиенти, когато става въпрос за безопасност на продуктите и строги регулаторни изисквания. фениксен гарантира, че всяка съставка, която може да доведе до образуване на свободни радикали или до промяна на мириса или вкуса на крайния продукт се елиминира от съставките при производството на цветни мастербачи.

polimeri.bg 19

Carrier resin Pigment Pigment content MFI (Melt Flow Index) gr/10 min Humidity

FR 115 N red LLDPE 15% T 190°C 2,16 kg 1,1 gr/10 min 0,15

FG 110 N green LLDPE 10% T 190°C 2,16 kg 1,05 gr/10 min 0,16

FBU 3 blue reLLDPE 10% T 190°C 2,16 kg 0,73 gr/10 min 0,17

FB 110 N blue LLDPE 10% T 190°C 2,16 kg 0,8 gr/10 min 0,15

FBU 120 N blue LLDPE 20% T 190°C 2,16 kg 0,02 gr/10 min 0,16

FY 115 N yellow LLDPE 15% T 190°C 2,16 kg 1,3 gr/10 min 0,17

FO 110 N orange LLDPE 15% T 190°C 2,16 kg 1,53 gr/10 min 0,18

polimeri.bg 20

Properties Value Unit Method Packaging & Storage Food Approval Applications

FBU3

Carrier Resin LLDPE - -The product comes in regular

cylindrical pellet form and packed into 25 kg. PE bags (50 bags per pallet). The bags must be stored

indoors for a maximum of 12 month and in dry environment of

approximately 25ºC. Consequently the composition is in accordance

with the European Parlament and Council Directive 94/62/EC of 20/12/1994 (as amended by

2004/12/EC, 2005/20/EC and (EC) 219/2009).

Fenixen FBU3 is not food approved.

This masterbatch offers a convenient way to incorporate Carbon Black in thermoplastic,

without dust contamination. It has prefect dispersion and optimized

flow properties, resulting to maximum hiding power and easy

processing. The product packaging specification is 25 kg (with

tolerance limit of +/-100gr). The product is recommended for use

in the following applications: Blow Moulding, Film/Sheet, Injection

Moulding, Thin Films.

Pigment Blue 10% - -

Pigment TypeRCF

(particle size 26-29nm)- -

Other Additives No - -M.F.I. (190ºC; 5 kg) 2.80-2.90 g/10 min ISO 1133

Moisture below 0.2 % ISO 787/2

Bulk Density 0.640-0.690 gr/ cm3 ASTM D1895

Density 1.60-1.70 g/cm3 ISO 1183

Blue Content 10 ± 2 % ISO 2530

Titanium Dioxide 5 ± 2 % ISO 2530

Polymer + Additives 85 ± 2 % ISO 3451


polimeri.bg 21

Fr 115 n

Пигмент червенPigment red


Carrier resin


Pigment content

Приложение: FR 115 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.

Application: FR 115 N is suitable for polyethylen products.Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.

polimeri.bg 22

FG 110 n

Пигмент зеленPigment green


Carrier resin


Pigment content

Приложение: FG 110 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.

Application: FG 110 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.

polimeri.bg 23

FBU 3

Пигмент синPigment blue


Carrier resin


Pigment content

Приложение: FBU 3 е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.

Application: FBU 3 is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.

polimeri.bg 24

FB 110 n



Carrier resin


Pigment content

Приложение: FB 110 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.

Application: FB 110 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.

polimeri.bg 25

FBU 120 n



Carrier resin


Pigment content

Приложение: FBU 120 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.

Application: FBU 120 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.

polimeri.bg 26

FY 115 n

Пигмент жълтPigment yellow


Carrier resin


Pigment content

Приложение: FY 115 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.

Application: FY 115 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.

polimeri.bg 27

FO 110 n

Пигмент оранжевPigment orange


Carrier resin


Pigment content

Приложение: FO 110 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.

Application: FO 110 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.

polimeri.bg 28

филера е материал, с различно процентно съдържание на калциев карбонат (CaCо3).

Той може да подобри качеството на фолиото и в повечето случаи значително да повиши производителността при използването му. Тъй като плътността на CaCо

3 е по-висока от тази

на полиетилена, за да се произведе фолио със съдържание на филер и със зададено тегло, трябва фолиото да се екструдира с по-малка дебелина.фениксен предлага богата гама филер с широк спектър на приложения. За подробности, моля пишете ни на [email protected]

The filler material is with different percentages of calcium carbonate (CaCO3). it can improve the quality of the film and in most cases

significantly increase productivity in its use. Since the density of CaCO3 is higher than that of polyethylene, to produce a film containing

a filler and a target weight, the film must be extruded with a smaller thickness.Fenixen offers a wide range FiLLer with a wide range of applications.For details, please contact us at [email protected]

polimeri.bg 29

Properties Value/Unit Method Food Approval

Packaging & Storage Applications Chemical Analysis of the

Calcium Carbonate materialTechnical Data of the Calcium

Carbonate material

FF 175

Melt Flow rate (190 ºC; 5 kg) 0.4 g/10 min ISO 1133

Fenixen FF175 is food

approved in

conform.


regular pellet form and packed in 25 kg PE bags or

Big Bags. The bags must be stored

indoors for a maximum of

12 month and in dry

environ-ment of

approximately 25ºC.

The product is recommended

for use in the following applications:

Blow MouldingFilm ExtrusionPipe extrusion

Injection Moulding

It can mix with any LDPE and HDPE and PP products. We recommend a ratio between

5% - 40%. This ratio

can change according to

the Speciality, thickness and the kind of the Raw Material.

CaCO3

99.00% Refractive index 1.59Dry brightness 97% DIN 6174 MgO 0.760% Hardness (Mohs) 3

Moisture below 0.2% DIN 53198 SiO2

0.075% Particle shapeCrystalline

rhombohedral

Density 1.8 g/cm3 DIN 53193 Fe2O

30.008%

ISO

900

2

Packed bulk density

1.1 g/cm3

Fineness Value/Unit Method Al2O

30.032%

pH value (DIN 53200)

9

d (0.97) 10 microns -

Loss on ignition

44.97%Oil absorption 12 per 100 gr powder

d (0.50) 4 microns - D.O.P. absorption

15 per 100 gr powderFiner than 2 microns 30% -

FF 180


Fenixen FF180 is food

approved in

conform.

CaCO3

99.70% Refractive index 1.59

Dry brightness 95.5% DIN 6174 MgO 0.000% Hardness (Mohs) 3



rhombohedral


30.020%

ISO

900

2

Packed bulk density

1.1 g/cm3


30.030%


9

d (0.97) 14 microns -Loss on ignition


d (0.50) 4.60 microns - D.O.P. absorption


NotesThe above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.

polimeri.bg 30




Carbonate material

FF 275


Fenixen FF 275 is food

approved in

conform.


regular pellet form and packed in 25 kg PE bags or

Big Bags. The bags must be stored

indoors for a maximum of

12 month and in dry

environ-ment of

approximately 25ºC.

The product is recommended

for use in the following applications:


Injection Moulding

It can mix with any LDPE and HDPE and PP products. We recommend a ratio between 5% - 40%. This ratio

can change according to

the Speciality, thickness and the kind of the Raw Material.

CaCO3


Dry brightness 97% DIN 6174 MgO 0.760% Hardness (Mohs) 3



rhombohedral


30.008%

ISO

900

2

Packed bulk density

1.1 g/cm3


30.032%


9

d (0.97) 10 microns -

Loss on ignition


d (0.50) 4 microns - D.O.P. absorption


FF 280



approved in

conform.

CaCO3





rhombohedral


30.020%

ISO

900

2

Packed bulk density

1.1 g/cm3


30.030%


9

d (0.97) 14 microns -Loss on ignition


d (0.50) 4.60 microns - D.O.P. absorption



polimeri.bg 31




Carbonate material

FF 380

Melt Flow rate (190 ºC; 5 kg) 0.1-0.2 g/10 min ISO 1133


approved in

conform.

The product comes in regular

pellet form and packed in

25 kg PE bags or Big Bags.

The bags must be stored


environment of approximately

25ºC.

The product is recommended for

use in the following applications:


Injection Moulding It can mix with any

LDPE and HDPE and PP products. We

recommend a ratio between 5% - 40%.

This ratio can change according to the

Speciality, thickness and the kind of the Raw

Material.

CaCO3





rhombohedral

Density 1.8 g/cm3 DIN 53193Fe

2O

30.020%

ISO

900

2

Packed bulk density

1.1 g/cm3

Fineness Value/Unit Method pH value (DIN 53200)

9d (0.97) 14 microns -

Al2O

30.030%

Oil absorption12 per 100 gr

powderd (0.50) 4.6 microns -

Loss on ignition

43.40%Finer than 2 microns 27% - D.O.P. absorption

13 per 100 gr powder


polimeri.bg 32

FF 175

Приложение: FF 175 е съединение на полиетилен със 75% съдържание на CaCO3. Подходящ e за всяко приложение и може

да се смесва с LDPE и HDPE и PP продукти.

Application: FF 175 is a compound of polyethylene with 75% content of CaCO3. Suitable e for each application and can be blended

with LDPE and HDPE and PP products.

Пигмент CaCO

3

Pigment


Carrier resin


Pigment content

polimeri.bg 33

FF 180





Пигмент CaCO

3

Pigment


Carrier resin


Pigment content

polimeri.bg 34

FF 275





Пигмент CaCO

3

Pigment


Carrier resin


Pigment content

polimeri.bg 35

FF 280





Пигмент CaCO

3

Pigment


Carrier resin


Pigment content

polimeri.bg 36

FF 380





Пигмент CaCO

3

Pigment


Carrier resin


Pigment content

polimeri.bg 37

фениксен предлага широка гама от мастербачи изработени от изключително устойчиви полимерни добавки. Тези добавки включват приплъзване, анти-блок, UV- защита, против мъгла, антиоксидант и свойства за обработка в промишлеността.фениксен ВлагоаБсорБер има функцията да иззема влагата от материала. Удачен е за рециклиран материал.

Fenixen offers a wide range of masterbatches made from highly resistant polymer additives. These additives include slip, anti-block, UV- protection, anti-fog, anti-oxidant properties and processing industry.Fenixen HUMiDiTY ABSOrBer function encroaching moisture from the material. Provision for recycled material.

polimeri.bg 38

Properties SpecificationsNominal

Value (ENG)

Method Packaging & Storage Applications

The product is recommended for use in the following

applications*

FD 250

Carrier Resin

LLDPE (MFI 3gr/10min)

Total Active Ingredient (%)

50.00 ± 1.80 OEE-8.2.4-01-09The product comes

in regular pellet form and packed in

25 kg PE bags (tolerance

+/-100gr). The bags must be stored indoors

for a maximum of 12 month and in dry environment of approximately

25ºC.

This masterbatch was develop to remove the humidity the plastic rawmaterials during processing. It is particulary

usefull when processing recycled materi-als. The recommendation additional level

of FD 250, varies between 0.5 – 2% depending on the humidity content of the

processed material.

Blow Moulding +

Main Additives

DesiccantVolatile

Content (%)<0.15 OEE-8.2.4-01-07

Film/Sheet +Injection Moulding +

Other Additives

NoPellet Visual Inspection

YesTapes o

Thin Films +

FD 270 Carrier Resin

LLDPE (MFI 3gr/10min)

Total Active Ingredient (%)

70.00 ± 1.80 OEE-8.2.4-01-09This masterbatch was develop to remove

the humidity the plastic rawmaterials during processing. It is particulary

usefull when processing recycled materi-als. The recommendation additional level

of FD 270, varies between 0.5 – 2% depending on the humidity content of the

processed material.

Blow Moulding: +

Main Additives

DesiccantVolatile

Content (%)<0.15 OEE-8.2.4-01-07

Film/Sheet: +Injection Moulding: +

Other Additives

NoPellet Visual Inspection

YesTapes: o

Thin Films: +



polimeri.bg 39

FD 250

Приложение: Фениксен FD 250 е полиетиленово съединение и е подходящо за всяко приложение. Може да се смесва с LDPE и HDPE и PP продукти.

Application: Fenixen FD 250 is a Polyethylene Compound and is suitable for any application and it can mix with any LDPE and HDPE and PP products.


Carrier resin


Pigment content

polimeri.bg 40

FD 270


Carrier resin


Pigment content

Приложение: Фениксен FD 270 е полиетиленово съединение и е подходящо за всяко приложение. Може да се смесва с LDPE и HDPE и PP продукти.

Application: Fenixen FD 270 is a Polyethylene Compound and is suitable for any application and it can mix with any LDPE and HDPE and PP products.

КонтаКти:София 1839

кв. Нова Враждебна, ул. “Япаджа” 46Фтел.: 02 945 45 22; 02 945 45 90

факс: 02 945 45 33 email: [email protected]

ContaCts:Sofia 1839, BulgariaNova Vrajdebna, “Yapadzha” 46F str.tel.: +359 2 945 45 22; +359 2 945 45 90fax: +359 2 945 45 33email: [email protected]

polimeri.bg

fenixen masterbatches

Documents