fiber laser marking and engraving system...fiber laser marking and engraving system zero maintenance...
TRANSCRIPT
Production part loading is through the sliding, interlocked laser
safe door/ viewport.The entire “ hood” opens and closes
effortlessly for complete interior access. All interior access
doors are interlocked for safely and compliance with
CDRH Class I certification requirements.
It is a complete, ready to use tabletop fiber laser marking system
in a Class I enclosure. Using Scanlab optical components,
an IPG fiber laser and ALI’s Prolase XP/7 Laser Marking software,
the Desktop Langolier provides the ultimate in quality, reliability
and functionality. Designed for small part and nameplate applications,
the Desktop Langolier is equally comfortable in both
industrial and office environments. Requiring only
a single 110VAC household connection the system is
ready to perform “out of the box”.
Preliminary information. Actual product specification and information is subject to change without further notice.
Fiber Laser Marking and Engraving System
Zero Maintenance Desktop laser system
Very low power consumption
Turn-key system with out of the box operation
Easy to use laser control software
Flexible, easy access, work area for various part sizes
and work holding fixtures
Fiber laser reliability and part marking capability
Intergrated alignment laser for easy mark set up
Permanently marks virtually any material
The Desktop Langolier is the result of 20+ years of building lasers for part marking.
www.jimani-inc.com [email protected] Telephone: (805) 486-1399 Fax: (805) 483-5127
Parameter Value Laser Mode and Technology Emission Wavelength Nominal Average Power Output Operating Voltage Maximum Power Consumption Writing SpeedMarking Field Size ( inches )
Enclosure ( inches ) Scan Head Aperture
Pulsed Fiber Laser 1060 - 1070 nm
20W / 30W / 50W 110V AC
230W / 280W / 350W 640 CPS single stroke 1mm characters
4.7 x 4.7 up to 7.2 x 7.2 10mm
47.32 x 25.98
Preliminary information. Actual product specification and information is subject to change without further notice.
1730 Fiske Place, OXNARD, California 93033 U S A
All Metals, Many plastics and Non-Metals
Bar Code, 2D Matrix
True Type Font Support
Radial Text, Serialization
EPS, PLT, DXF and Most Vector Files Prolase XP/7 Laser marking Software
Fiber Laser Marking and Engraving System
CDRH Class IMaintence Free110 VAC Operation