fiber monitoring system
TRANSCRIPT
KP-0083-18-12-191
Remote Fiber Testing System
March 2012
FiMO, Fiber Monitoring SystemIntroduction
KP-0083-18-12-0191
1
How useful FiMO
� Reduce maintenance cost and time by deleting human works (researching the pervious cabling data etc.) and correct person can be dispatched easy.
malfunction
occur!Network
EngineerCabling
EngineerWhich portion is cause of the malfunction?
� Prevent serious system down and bring quick restoration into reality by constant fiber monitoring.
Construction mistakeCable closure floodedPlantInsectAnimalOverride Hook
Cable and Fiber damaged by various external factors
Stored damages
caused by
Natural phenomena
Which engineer is correct to recover the problem?
FiMO can watch fiber conditions not only break but also degradation.
FiMO can distinguish optical fiber cable failure from communication equipment malfunction, moreover, the location can be shown quickly.
KP-0083-18-12-0191
2
FiMO location in existing systemMaintenance Center
FiMO Server
�Flooding Sensor inside
RTU No.1 at an Exchange
�
OFS
�
Coupler Module�For Active Monitoring
� �Cut Filter is here
(For Active Monitoring
�
e-mail / SMS
�FBG Filter is here (For PON
�IP Network
40 ports type
GIS
Network Management
SystemRemote Client
�
OTUOFS
OFS
OTU
�FTTH PON Field
Existing System
Dark fiberActive fiber
Active Monitor. (P2 P)
PON Active Monitor
Dark fiber Monitor
Pigtail type, FAST type or Adapter type
OFS
OTU
OFS
OTU…RTU No.n at an ExchangeOnly OFS at an Exchange
OFS CascadingThis OFS supported byNo1 OTU
RTU No.2 RTU No.m
KP-0083-18-12-0191
3
FiMO consists of following components
Dark Fiber Monitoring
FiMO Management Server
>Windows 2008>Test Result Collection>Test Result Verification>Alarm Notification>Manage OTU and OFS
>Controller and OTDR>Send Measured Datato Server
OTU (Optical Test Unit)
< Basic>
OFS (Optical Fiber Selector)
>Connected with OTU
>Switch to the Target Fiber
Filter>OTDR Optical signal - Cut Off / Reflect
Pigtail type Field Installable type
Adaptor typeInline type
Active Fiber Monitoring / PON Fiber Monitoring < Advanced >
WDM Coupler Module
>4 Couplers per Module
>Optical signal Coupling and Dividing
>Rack mount chassis Up to 25 modulesper chassis
40 ports type
KP-0083-18-12-0191
4
Configuration – Dark Fiber Monitoring
� Dark fiber monitoring is Basic and economical fiber monitoring method by watching cable damages.
� Suitable for backbone cable, trunk cable or long haul network monitoring.
OTU
OFS Monitored Cable
1550 nm
Network
FiMO Server
1550nm OTDR
built in OTU
Cable damage !
Flood, Fire, Lateral pressure, Tension, Bend, etc.
Monitored Fiber
Not Monitored Fiber
KP-0083-18-12-0191
5
Configuration –P to P Active Fiber Monitoring
� Active fiber monitoring provide customer with high quality fiber cable network.
� 1650nm wavelength is standardized wavelength for maintenance by ITU-T L.41.
OTU
OFS
1310nm
1550nmTransmissionequipment
Transmissionequipment
Network
FiMO Server
Reflected signal
1650nm
1650nmCut
WDM Coupler Module
Filter
1650nm Cut 1650nm signal
??
Demarcation
1650nm OTDR
built in OTU
KP-0083-18-12-0191
6
Configuration –PON Fiber Monitoring
� Active fiber monitoring system in FTTx field.
� Reflection signal caused by FBG enables to detect fiber failure beyond a splitter.
(Enables to identify which branch of Splitter)
PON
OLT
OTU
OFS
1310nm
1490nm 1650nm
Splitter
FBG is here and
Embedded in SC Pigtail
WDM
Coupler Module
1650nm
Cut and Reflect 1650nm
Cut
Reflect
1650nm
Reflected signal
Cut
Network
FiMO Server
PONONU
KP-0083-18-12-0191
7
FiMO Advantages sum-up
� Possibility for PON MonitoringAble to monitor the fiber even after splittersEspecially Fujikura has huge size of actual shipment in FTTH
� Real-Time MonitoringEnable to use during cable construction too
Instant observable change in cable route condition
� Easy operationNo need to configure any parameters, so operator not has to be expert, Basically “Plug & Play”
� Alarm report writer function Alarm notice should be informed to registered persons by e-mail with relevant report including OTDR graphical data etc.
� Statistic data graph functionLong -term statistic data graph for an indicated point has to be displayed on the client PC.
Monitoring
System
Monitored Monitored
Monitoring
System
Constructor
Splitter
KP-0083-18-12-0191
8
Supply records
Total
(1997 ~ 2011)
OTU 1,100
OFS 5,000
Coupler Module 517,000
FBG filter 6,020,000
Customer Products & Services
Telecom Operator A Fiber Optic Monitoring System, Optical Test Unit, Filters, System
Integration, Training, Maintenance
Telecom Operator B Fiber Optic Monitoring System, Optical Test Unit, Filters, System
Integration, Training, Maintenance
Mobile Operator A Central System, Fiber Optic Monitoring System, Optical Test Units,
Filters, Network Data Management System, Networking services
Telecom Operator C Fiber Optic Monitoring System, Optical Test Units, Filters
CATV Companies Fiber Optic Monitoring System, Optical Test Units, Filters
Local Authority &
Government Office
Fiber Optic Monitoring System, Optical Test Units, Filters
JAPAN
Customer Country Products & Services
Telecom operator Taiwan Fiber Optic Monitoring System, Optical Test Units, Filters
Telecom operator Malaysia Fiber Optic Monitoring System, Optical Test Unit, Filters, System Integration, Networking Services, Training, Maintenance
Telecom operator China Fiber Optic Monitoring System, Optical Test Units, Filters
Overseas
Total Quantity for each unit
KP-0083-18-12-191
Remote Fiber Testing System
March 2012
FiMO, Fiber Monitoring SystemIntroduction
KP-0083-18-12-0191
1
How useful FiMO
� Reduce maintenance cost and time by deleting human works (researching the pervious cabling data etc.) and correct person can be dispatched easy.
malfunction
occur!Network
EngineerCabling
EngineerWhich portion is cause of the malfunction?
� Prevent serious system down and bring quick restoration into reality by constant fiber monitoring.
Construction mistakeCable closure floodedPlantInsectAnimalOverride Hook
Cable and Fiber damaged by various external factors
Stored damages
caused by
Natural phenomena
Which engineer is correct to recover the problem?
FiMO can watch fiber conditions not only break but also degradation.
FiMO can distinguish optical fiber cable failure from communication equipment malfunction, moreover, the location can be shown quickly.
KP-0083-18-12-0191
2
FiMO location in existing systemMaintenance Center
FiMO Server
�Flooding Sensor inside
RTU No.1 at an Exchange
�
OFS
�
Coupler Module�For Active Monitoring
� �Cut Filter is here
(For Active Monitoring
�
e-mail / SMS
�FBG Filter is here (For PON
�IP Network
40 ports type
GIS
Network Management
SystemRemote Client
�
OTUOFS
OFS
OTU
�FTTH PON Field
Existing System
Dark fiberActive fiber
Active Monitor. (P2 P)
PON Active Monitor
Dark fiber Monitor
Pigtail type, FAST type or Adapter type
OFS
OTU
OFS
OTU…RTU No.n at an ExchangeOnly OFS at an Exchange
OFS CascadingThis OFS supported byNo1 OTU
RTU No.2 RTU No.m
KP-0083-18-12-0191
3
FiMO consists of following components
Dark Fiber Monitoring
FiMO Management Server
>Windows 2008>Test Result Collection>Test Result Verification>Alarm Notification>Manage OTU and OFS
>Controller and OTDR>Send Measured Datato Server
OTU (Optical Test Unit)
< Basic>
OFS (Optical Fiber Selector)
>Connected with OTU
>Switch to the Target Fiber
Filter>OTDR Optical signal - Cut Off / Reflect
Pigtail type Field Installable type
Adaptor typeInline type
Active Fiber Monitoring / PON Fiber Monitoring < Advanced >
WDM Coupler Module
>4 Couplers per Module
>Optical signal Coupling and Dividing
>Rack mount chassis Up to 25 modulesper chassis
40 ports type
KP-0083-18-12-0191
4
Configuration – Dark Fiber Monitoring
� Dark fiber monitoring is Basic and economical fiber monitoring method by watching cable damages.
� Suitable for backbone cable, trunk cable or long haul network monitoring.
OTU
OFS Monitored Cable
1550 nm
Network
FiMO Server
1550nm OTDR
built in OTU
Cable damage !
Flood, Fire, Lateral pressure, Tension, Bend, etc.
Monitored Fiber
Not Monitored Fiber
KP-0083-18-12-0191
5
Configuration –P to P Active Fiber Monitoring
� Active fiber monitoring provide customer with high quality fiber cable network.
� 1650nm wavelength is standardized wavelength for maintenance by ITU-T L.41.
OTU
OFS
1310nm
1550nmTransmissionequipment
Transmissionequipment
Network
FiMO Server
Reflected signal
1650nm
1650nmCut
WDM Coupler Module
Filter
1650nm Cut 1650nm signal
??
Demarcation
1650nm OTDR
built in OTU
KP-0083-18-12-0191
6
Configuration –PON Fiber Monitoring
� Active fiber monitoring system in FTTx field.
� Reflection signal caused by FBG enables to detect fiber failure beyond a splitter.
(Enables to identify which branch of Splitter)
PON
OLT
OTU
OFS
1310nm
1490nm 1650nm
Splitter
FBG is here and
Embedded in SC Pigtail
WDM
Coupler Module
1650nm
Cut and Reflect 1650nm
Cut
Reflect
1650nm
Reflected signal
Cut
Network
FiMO Server
PONONU
KP-0083-18-12-0191
7
FiMO Advantages sum-up
� Possibility for PON MonitoringAble to monitor the fiber even after splittersEspecially Fujikura has huge size of actual shipment in FTTH
� Real-Time MonitoringEnable to use during cable construction too
Instant observable change in cable route condition
� Easy operationNo need to configure any parameters, so operator not has to be expert, Basically “Plug & Play”
� Alarm report writer function Alarm notice should be informed to registered persons by e-mail with relevant report including OTDR graphical data etc.
� Statistic data graph functionLong -term statistic data graph for an indicated point has to be displayed on the client PC.
Monitoring
System
Monitored Monitored
Monitoring
System
Constructor
Splitter
KP-0083-18-12-0191
8
Supply records
Total
(1997 ~ 2011)
OTU 1,100
OFS 5,000
Coupler Module 517,000
FBG filter 6,020,000
Customer Products & Services
Telecom Operator A Fiber Optic Monitoring System, Optical Test Unit, Filters, System
Integration, Training, Maintenance
Telecom Operator B Fiber Optic Monitoring System, Optical Test Unit, Filters, System
Integration, Training, Maintenance
Mobile Operator A Central System, Fiber Optic Monitoring System, Optical Test Units,
Filters, Network Data Management System, Networking services
Telecom Operator C Fiber Optic Monitoring System, Optical Test Units, Filters
CATV Companies Fiber Optic Monitoring System, Optical Test Units, Filters
Local Authority &
Government Office
Fiber Optic Monitoring System, Optical Test Units, Filters
JAPAN
Customer Country Products & Services
Telecom operator Taiwan Fiber Optic Monitoring System, Optical Test Units, Filters
Telecom operator Malaysia Fiber Optic Monitoring System, Optical Test Unit, Filters, System Integration, Networking Services, Training, Maintenance
Telecom operator China Fiber Optic Monitoring System, Optical Test Units, Filters
Overseas
Total Quantity for each unit
KP-0083-18-12-191
Remote Fiber Testing System
March 2012
FiMO, Fiber Monitoring SystemIntroduction
KP-0083-18-12-0191
1
How useful FiMO
� Reduce maintenance cost and time by deleting human works (researching the pervious cabling data etc.) and correct person can be dispatched easy.
malfunction
occur!Network
EngineerCabling
EngineerWhich portion is cause of the malfunction?
� Prevent serious system down and bring quick restoration into reality by constant fiber monitoring.
Construction mistakeCable closure floodedPlantInsectAnimalOverride Hook
Cable and Fiber damaged by various external factors
Stored damages
caused by
Natural phenomena
Which engineer is correct to recover the problem?
FiMO can watch fiber conditions not only break but also degradation.
FiMO can distinguish optical fiber cable failure from communication equipment malfunction, moreover, the location can be shown quickly.
KP-0083-18-12-0191
2
FiMO location in existing systemMaintenance Center
FiMO Server
�Flooding Sensor inside
RTU No.1 at an Exchange
�
OFS
�
Coupler Module�For Active Monitoring
� �Cut Filter is here
(For Active Monitoring
�
e-mail / SMS
�FBG Filter is here (For PON
�IP Network
40 ports type
GIS
Network Management
SystemRemote Client
�
OTUOFS
OFS
OTU
�FTTH PON Field
Existing System
Dark fiberActive fiber
Active Monitor. (P2 P)
PON Active Monitor
Dark fiber Monitor
Pigtail type, FAST type or Adapter type
OFS
OTU
OFS
OTU…RTU No.n at an ExchangeOnly OFS at an Exchange
OFS CascadingThis OFS supported byNo1 OTU
RTU No.2 RTU No.m
KP-0083-18-12-0191
3
FiMO consists of following components
Dark Fiber Monitoring
FiMO Management Server
>Windows 2008>Test Result Collection>Test Result Verification>Alarm Notification>Manage OTU and OFS
>Controller and OTDR>Send Measured Datato Server
OTU (Optical Test Unit)
< Basic>
OFS (Optical Fiber Selector)
>Connected with OTU
>Switch to the Target Fiber
Filter>OTDR Optical signal - Cut Off / Reflect
Pigtail type Field Installable type
Adaptor typeInline type
Active Fiber Monitoring / PON Fiber Monitoring < Advanced >
WDM Coupler Module
>4 Couplers per Module
>Optical signal Coupling and Dividing
>Rack mount chassis Up to 25 modulesper chassis
40 ports type
KP-0083-18-12-0191
4
Configuration – Dark Fiber Monitoring
� Dark fiber monitoring is Basic and economical fiber monitoring method by watching cable damages.
� Suitable for backbone cable, trunk cable or long haul network monitoring.
OTU
OFS Monitored Cable
1550 nm
Network
FiMO Server
1550nm OTDR
built in OTU
Cable damage !
Flood, Fire, Lateral pressure, Tension, Bend, etc.
Monitored Fiber
Not Monitored Fiber
KP-0083-18-12-0191
5
Configuration –P to P Active Fiber Monitoring
� Active fiber monitoring provide customer with high quality fiber cable network.
� 1650nm wavelength is standardized wavelength for maintenance by ITU-T L.41.
OTU
OFS
1310nm
1550nmTransmissionequipment
Transmissionequipment
Network
FiMO Server
Reflected signal
1650nm
1650nmCut
WDM Coupler Module
Filter
1650nm Cut 1650nm signal
??
Demarcation
1650nm OTDR
built in OTU
KP-0083-18-12-0191
6
Configuration –PON Fiber Monitoring
� Active fiber monitoring system in FTTx field.
� Reflection signal caused by FBG enables to detect fiber failure beyond a splitter.
(Enables to identify which branch of Splitter)
PON
OLT
OTU
OFS
1310nm
1490nm 1650nm
Splitter
FBG is here and
Embedded in SC Pigtail
WDM
Coupler Module
1650nm
Cut and Reflect 1650nm
Cut
Reflect
1650nm
Reflected signal
Cut
Network
FiMO Server
PONONU
KP-0083-18-12-0191
7
FiMO Advantages sum-up
� Possibility for PON MonitoringAble to monitor the fiber even after splittersEspecially Fujikura has huge size of actual shipment in FTTH
� Real-Time MonitoringEnable to use during cable construction too
Instant observable change in cable route condition
� Easy operationNo need to configure any parameters, so operator not has to be expert, Basically “Plug & Play”
� Alarm report writer function Alarm notice should be informed to registered persons by e-mail with relevant report including OTDR graphical data etc.
� Statistic data graph functionLong -term statistic data graph for an indicated point has to be displayed on the client PC.
Monitoring
System
Monitored Monitored
Monitoring
System
Constructor
Splitter
KP-0083-18-12-0191
8
Supply records
Total
(1997 ~ 2011)
OTU 1,100
OFS 5,000
Coupler Module 517,000
FBG filter 6,020,000
Customer Products & Services
Telecom Operator A Fiber Optic Monitoring System, Optical Test Unit, Filters, System
Integration, Training, Maintenance
Telecom Operator B Fiber Optic Monitoring System, Optical Test Unit, Filters, System
Integration, Training, Maintenance
Mobile Operator A Central System, Fiber Optic Monitoring System, Optical Test Units,
Filters, Network Data Management System, Networking services
Telecom Operator C Fiber Optic Monitoring System, Optical Test Units, Filters
CATV Companies Fiber Optic Monitoring System, Optical Test Units, Filters
Local Authority &
Government Office
Fiber Optic Monitoring System, Optical Test Units, Filters
JAPAN
Customer Country Products & Services
Telecom operator Taiwan Fiber Optic Monitoring System, Optical Test Units, Filters
Telecom operator Malaysia Fiber Optic Monitoring System, Optical Test Unit, Filters, System Integration, Networking Services, Training, Maintenance
Telecom operator China Fiber Optic Monitoring System, Optical Test Units, Filters
Overseas
Total Quantity for each unit