fiber-optic sensors - alltronix in sensors(32).pdf · fiber-optic sensors selection guide j-vi...
TRANSCRIPT
J-i
Fiber-Optic Sensors
ContentsSelection Guide J-ii
Fiber-Optic Cables
E32 Fibers
Fiber-optic cables withsensing heads J-1
E32-V Vacuum chamber sensingsystem J-7
Amplifiers
E3X-DA-S Dual digital display,self-optimizing amplifier J-8
E3X-DAC-S
Dual digital display, true colorsensing amplifier J-11
E3X-MDA Two digital amplifiers in one J-13
E3X-DRT21/SRT21/CIF11
Communication units formulti-amplifier sensor blocks J-15
E3X-DRT21S
Sensor block communication unit J-16
E3X-SD Basic amplifier with digitaldisplay, push button auto teach J-18
E3X-NA Basic amplifier with bar graphdisplay, manual adjustment J-20
E3X-NH High precision amplifier J-21
E3X-NT/-NM
Auto-tuning amplifier;four-in-one models J-22
E3X-NV/NVG Water resistant amplifier J-23
E3S-X3 Compact metal bodyDC amplifier J-23
E3A2-X Universal voltage amplifier,replaceable output J-24
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
Fiber-Optic SensorsSelection Guide
J-ii Indicates models available for fast delivery.
Amplifiers
Teachingfunctions
Simple amplifier for single fiber cables E3X-SD
Programmable amplifier for single fiber cables E3X-DA-S
Auto-teaching
Digital color fiber-optic ampli-fiers in single or dual output E3X-DAC-S
Two-in-one digital fiber-optic amplifier E3X-MDA
Water-resistant amplifier E3X-NV/NVGManual teaching
Space-saving, for 1 or 4 amplifiers E3X-NT/NM
Easy to set and monitor
Simple amplifier for single fiber cables E3X-SD
Programmable amplifier forsingle fiber cables E3X-DA-S
Digital setting anddisplay
Color sensing amplifier for single or dual fiber cables E3X-DAC-S
Two-in-one amplifiers fortwo fiber cables E3X-MDA
LED sensitivity bar graphdisplay E3X-NA
Analog setting and display
13 threshold adjustments,8 level sensitivity meter E3X-NH
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
Fiber-Optic SensorsSelection Guide
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-iii
Amplifiers
Advancedfunctionality
Control logic Logical AND/OR E3X-MDA
ON-delay, OFF-delay, One-shot timer E3X-SD
ON-delay, OFF-delay, One-shot timer E3X-MDA
ON-delay, OFF-delay, One-shot timer E3X-DA-S
ON-delay, OFF-delay, One-shot timer E3X-DAC-S
Time delays
OFF-delay E3X-NV/NVG
OFF-delay E3X-NA
ON-delay, OFF-delay, On-shot, equal ON-delay/
OFF-delayE3A2-X@T
Independently set ON-delay/OFF-delay E3A2-X@D
External counterSwitchable Up counter and
Down counter; 0 to 9,999,999 range
E3X-DA-RMS
Area output 2 independent outputs forarea detection E3X-DA-TWS
Differential operation Detects minute objects E3X-DA-S
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
Fiber-Optic SensorsSelection Guide
J-iv Indicates models available for fast delivery.
Amplifiers
Remotesetting and monitoring
Color sensing amplifier for single or dual fiber cables E3X-DAC-S
Digital fiber-optic amplifier, external input E3X-DA-RMS
Two-in-one digital fiber-optic amplifier E3X-MDA
E3X-MC11-SV2 console and programming
head kit
DeviceNet communication unit E3X-DRT21
DeviceNet communication unit for E3X-DA-S or
E3X-MDA amplifiers onlyE3X-DRT21-S
CompoBus/S communication unit E3X-SRT2
Serial communication unit E3X-CIF11
Multiplesensors in one body
Two-in-one; equal to one10 mm-wide amp E3X-MDA
Save mounting space
Color sensing amplifier, ad-vanced model with two-in-one E3X-DAC-S
Four-in-one, size equal to three amps E3X-NM
Connector models
Simple amplifier for single fiber cables E3X-SD
Reduce wiring by E39-CN@@ connectors
Programmable amplifier for single fiber cables E3X-DA-S
Two-in-one amplifiers for two fiber cables E3X-MDA
Analog set/bar graph display amplifier E3X-NA
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
Fiber-Optic SensorsSelection Guide
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-v
Amplifiers
Color markdetection
White LED Digital true RGB color amplifier E3X-DAC-S
Blue LED Digital set/display amplifier E3X-DAB-S
Green LED Digital set/display amplifier E3X-DAG-S
Green LED Analog set/bar graphdisplay amplifier E3X-NAG
Green LED Water-resistant amplifier E3X-NVG
RGB LEDsDetects all color combina-
tions; uses E32 fiber cables; see "Photoelectric Section"
E3MC-Y
Detects all color combina-tions; uses dedicated fiber cables; see "Photoelectric
Section"RGB LEDs E3MC-X
Network communication
DeviceNet; connect up to 16 amps E3X-DRT21
Comm. unit for E3X-DA6/-DA8/
-DAB/-DAG ampsCompoBus/S; connect up to
14 amps E3X-SRT2
Serial RS-422; connect up to 16 amps E3X-CIF11
Water-resistant body
Plastic body E3X-NV/NVGRated IP66 for light
washdown
Metal body E3X-X3
AC/DC power supply
24 to 240 VAC,12 to 240 VDC
Amplifier with replaceable output E3A2-X
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
Fiber-Optic SensorsSelection Guide
J-vi Indicates models available for fast delivery.
Fiber-Optic Cables and SystemsOmron offers over 100 fiber-optic sensor cables. Most have a plastic core and plastic sheath that can be cut to length in the field. They solve many application problems in addition to the special cases detailed below:
• Wide area sensing• Precise positioning• Minute object detection• Background suppression• Long-range detection of small objects• Fluid level detection• Transparent object detection• Extreme bending for tight installations• General-purpose space-confined detection
Constantflexing for
roboticarms and
articulatingequipment
Through-beam; threaded heads 680 mm E32-T11
Through-beam; threaded heads 200 mm E32-T21
Through-beam; 1.5 mm dia. head; 200 mm E32-T22B
Stranded fiber core allows 4 mm
bending radiusDiffuse; threaded head;
170 mm E32-D11
Diffuse; threaded head; 70 mm E32-D21B
Diffuse; threaded head; 30 mm E32-D21
Diffuse; 1.5 mm dia. head;30 mm E32-D22B
Right-angle,L-shaped
Through-beam; 1 mm bend radius; M4 threaded heads;
700 mmE32-T11N
Convenient Mounting
No SnaggingNo Breaking
Diffuse; 1 mm bend radius; M6 threaded head; 300 mm E32-D11N
Diffuse; 4 mm bend radius; M6 threaded head; 280 mm E32-C11N
Diffuse; 4 mm bend radius; M3 threaded head; 40 mm E32-C31N
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
Fiber-Optic SensorsSelection Guide
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-vii
Fiber-Optic Cables and Systems
Resists high temperatures
150° C E32-T51
150° C, side view E32-T54Through-beam
200° C, L-shaped head E32-T84S-S
350° C, stainless steel sheath E32-T61-S
150° C E32-D51
200° C E32-D81R-SDiffuse
350° C, stainless steel sheath E32-D61-S
400° C, stainless steel sheath,probe head E32-D73-S
Chemical resistant
Through-beam, 2 m sensing distance E32-T11F
Through-beam, 3 m sensing distance E32-T12F
Fluoro-resin-coated cables and head
Through-beam, 400 mm sensing distance, side view
headE32-T14F
Through-beam, 700 mm sensing distance E32-T81F-S
Diffuse, 95 mm sensing distance E32-D12F
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
Fiber-Optic SensorsSelection Guide
J-viii Indicates models available for fast delivery.
Fiber-Optic Cables and Systems
Resists vacuum pressure (rated to
7.5 x 10-10
torr · l/s)
200 mm sensing distance E32-T51V
In-chamber through-beam
cables130 mm sensing distance,
side view E32-T54V
480 mm sensing distance,heat-resistance to 200° C E32-T84SV
1-channel flange forinside/outside fibers E32-VF1
Mounting flanges
4 channel flange for inside/outside fibers E32-VF4
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-1
E32 Fiber-Optic Photo Sensors
Fiber-Optic Cables with Sensing Heads Fit Space-Confined Sites • Over 100 sensing heads/cables available to match your
exact requirements• Sensing distance relies on the combination of fiber-optic
cable and amplifier selected• Fiber-optic sensor solutions cover all automation tasks:
basic object detection, positioning, color analysis and high-accuracy sensing
• E32 fiber-optic cables combine with Omron’s advanced amplifier models E3X-DA-S, E3X-MDA, E3X-NA and many other series
• Protective spiral tubes (armor), lens adapters to modify sensing distance and direction, and fiber connectors available as accessories
Specifications• Sensing distances: All values reference the E3X-DA-S
amplifier in standard sensing mode; values vary by amplifier model, light source color and sensing mode
• Dimensions: 1- and 2-mm dia. fiber bundles x 2 m length; cut plastic fibers to desired length, except glass core and armored models
• Operating temperature: -40° to 70°C, unless otherwise noted
• Minimum detectable object: 0.005-mm dia. for most models
Use Omron’s Online Fiber-Optic Selection ToolFind the right amplifier and fiber-optic cable combination based on a few simple answers.
Standard Models• Pliable multi-core cables with 1 mm bending radius• Standard with 10 or 25 mm bending radius, depending on
fiber diameter• Break-resistant robotic cable with 4 mm bending radius,
1 million flexes minimum• Fluorine resin coated cable resists degradation from oil
adhesion• Wide variety of shapes for adapting to different installation
locations• Choose the model that suites the installation space from a
wide variety of shapes and sizes (7 shapes in standard or small sizes)
Fiber-Optic Photo Sensors
E32 B322
Threaded Unthreaded Flat Bendable probe
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-2 Indicates models available for fast delivery.
E32 Fiber-Optic Photo Sensors
Right-Angle (L-shaped attachment) Models• L-shaped for space savings, easy mounting and will not
snag during setup or routine maintenance• Innovative sensor head shape accommodates two wrench
sizes for quick tightening to mounting bracket
Special Beam Models• Long distance, high power• Ultra-compact, ultra-fine sleeve• Coaxial beam, small spot• Fine beam (narrow vision field)• Area sensing• Retro-reflective• Limited-reflective• Resistant to dust and dirt• Capable of detecting small workpieces• Resistant to workpiece vibration• Use these cables to handle unstable detection conditions
Harsh Environment Models• Heat-resistant for high-temperature environments• Chemical-resistant where cable and/or sensing head are
exposed to chemical splatter
Application-Specific Models• Label detection• Liquid-level detection• Alignment and mapping of glass substrates• Wafer mapping
Through-Beam
E32-T11N+
E32-T11N E39-F1(700 mm sensing distance, M4 threaded head, 1 mm bend radius)
(focusing lens, 4 m sensing distance)
Diffuse
E32-D11N E32-C11N E32-C31N(300 mm sensing distance, M6 threaded head, 1 mm bend radius)
(280 mm sensing distance, M6 threaded head, 4 mm bend radius)
(40 mm sensing distance, M3 threaded head, 4 mm bend radius)
E32-T11N
E32-D11N
Small-spotmodels
Area-sensing models
Limited-reflective models
High-power models
E32-C42+E39-F3A E32-T16J E32-L24L E32-T17L
Heat-resistant models Chemical-resistant models
Label-detection models
Alignment-check models
Liquid-level detection models
E32-G14 E32-L16 E32-D36T
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-3
E32 Fiber-Optic Photo Sensors
Over 100 Fiber-Optic Sensor CablesOne exactly matches your requirements
Constant Flexing Applications• Special construction resists
breaking and enables them to withstand the punishing effects of constant flexing or tight bending
• Stranded fiber core can be bent to a radius as small as 4 mm with no loss in light intensity
• Ideal for use on moving and articulating equipment such as robotic arms
Chemical Resistant Applications• Fluororesin coated fiber optic
cables provide long lasting reliability in sensing environments where corrosive fluids and gasses are present
• Designed for use where strong chemicals are manufactured or being used for processing or cleaning
High Temperature Applications• A variety of heat resistant
fiber optic cables that can operate reliably in temperatures up to 400°C (752°F)
• Fluororesin and armored stainless steel sheaths protect the fibers for use in ovens and other high heat applications
Through-BeamE32-T11(680 mm sensing distance, M4 threaded head)
E32-T21(200 mm sensing distance, M3 threaded head)
E32-T22B(200 mm sensing distance, 1.5 mm dia. head)
DiffuseE32-D11(170 mm sensing distance, M6 threaded head)
E32-D21(30 mm sensing distance, M3 threaded head)
E32-D21B(70 mm sensing distance, M4 threaded head)
E32-D22B(30 mm sensing distance, 1.5 mm dia. head)
Through-Beam
E32-T11F(2000 mm sensing distance, 7.2 mm dia. head)
E32-T12F(3000 mm sensing distance, 5 mm dia. head)
E32-T14F(400 mm sensing distance, 5 mm dia., side view head)
E32-T81F-S(700 mm sensing distance, 6 mm dia. head, to 200°C)
Diffuse
E32-D12F(95 mm sensing distance, 6 mm dia. head)
Through-BeamE32-T51(760 mm sensing distance, M4 threaded head, to 150°C)
E32-T54(230 mm sensing distance, 2 mm dia., side view head, to 150°C)
E32-T61-S(450 mm sensing distance, M4 threaded head, stainless steel sheath, to 350°C)
E32-T84S-S(1300 mm sensing distance, 3 mm dia. L-shaped head, to 200°C)
DiffuseE32-D51(230 mm sensing distance, M6 threaded head, to 150°C)
E32-D61-S(90 mm sensing distance, M6 threaded heads, stainless steel sheath, to 350°C)
E32-D73-S(60 mm sensing distance, M4 threaded head, stainless steel probe, to 400°C)
E32-D81R-S(90 mm sensing distance, M6 threaded head, to 200°C)
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-4 Indicates models available for fast delivery.
E32 Fiber-Optic Photo Sensors
Over 100 Fiber-Optic Sensor Cables cont.One exactly matches your requirements.
Wide Area Sensing Applications• Ideal for applications that
require a larger target area for sensing small, randomly positioned objects
• Project a wide plane of light that can detect very small objects anywhere within the width of the beam
• Use for detecting pills in packaging and similar applications
Precise Positioning Applications• Unique coaxial cable design
that surrounds the light emitting fiber with light detection fibers
• Designed for use when it is critical to position objects or machinery accurately and consistently
Detect Minute Objects• Detect extremely small
objects, as small as 0.5 mm, in very space restricted areas
• Most are available with bendable “probe” tips that let you mount the head away from the detection area and bend the probe tip to the precise sensing area
Through-Beam
E32-M21(610 mm sensing distance, four M3 heads)
E32-T16(2800 mm sensing distance, 10 mm wide beam)
E32-T16P(1100 mm sensing distance, 11 mm wide beam)
E32-T16W(1800 mm sensing distance, 30 mm wide beam)
E32-T16J(1000 mm sensing distance, 11 mm wide beam, side view)
Diffuse
E32-D36P1(100 mm sensing distance, 10.85 mm wide beam)
Diffuse
E32-CC200(300 mm sensing distance, M6 threaded head, 16 receivers)
E32-D32L(150 mm sensing distance, 3 mm dia. head, 16 receivers)
E32-D32(75 mm sensing distance, 2 mm dia. head, 4 receivers)
E32-C31(75 mm sensing distance, M3 threaded head, 4 receivers)
E32-C41(35 mm range, M3 threaded head, 6 receivers)
E32-C42(35 mm range, 2 mm dia. head, 6 receivers)
Through-BeamE32-T22(220 mm sensing distance, 2 mm dia. head)
E32-TC200B(760 mm sensing distance, 1.2 mm dia. head, probe tip)
E32-TC200E(220 mm sensing distance, M3 threaded head)
E32-TC200F(220 mm sensing distance, 0.9 mm dia. head, probe tip)
DiffuseE32-DC200B(300 mm sensing distance, 2.5 mm dia. head, probe tip)
E32-DC200E(80 mm sensing distance, M3 threaded head)
E32-DC200F(80 mm sensing distance, 1.2 mm dia. head, probe tip)
E32-D33(16 mm sensing distance, 0.8 mm dia. head, probe tip)
E32-D331(3 mm sensing distance, 0.5 mm dia. head, probe tip)
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-5
E32 Fiber-Optic Photo Sensors
Over 100 Fiber-Optic Sensor Cables cont.One exactly matches your requirements.
Background Suppression Applications• Solve the problem of
background reflections in space constricted areas
• Can be used for precise positioning of objects or machinery
• Left- and right-side emitter models eliminate interference when using two or more E32-L56 sensing heads
Fluid Level Detection• Detect fluid levels in space-
confined areas• Immersion style sensing
heads can be submerged in the fluid to be monitored
• Tube mounted sensing heads can sense fluids through a clear tube
Long Range Detection of Small Objects• Detect small objects over
longer distances in space-confined areas
• Available in through-beam or diffuse versions with threaded and non-threaded heads
E32-L25
Convergent BeamE32-L24L(4 ±2 mm range, side view head, to 105°C)
E32-L24S(0-4 mm range, side view head)
E32-L25(3.3 mm range, side view head)
E32-L25L(7.2 ±1.8 mm range)
E32-L25A(3.3 mm range)
E32-L56E@(4-12 mm range)
E32-L66(5-18 mm range, sensing head to 300°C)
E32-D82F1(Immersion type, 150 mm length)
E32-D82F2(Immersion type, 350 mm length)
E32-A01(External mount; 3.2, 6.4, 9.5 mm clear tube)
E32-A02(External mount; 6 to 13 mm clear tube)
E32-L25T(External mount, 8 to 10 mm clear tube)
E32-D36F(External mount; clear tube, no diameter restriction)Also consider EE-SPX613Amplified Photomicrosensor
Through-BeamE32-T11L(1330 mm sensing distance, M4 threaded head)
E32-T12L(1330 mm sensing distance, 3 mm dia. head)
E32-T14L(460 mm sensing distance, 3 mm dia., side view head)
E32-T17L(20,000 mm sensing distance, M14 threaded head)
E32-T21L(440 mm sensing distance, M3 threaded head)
E32-T22L(440 mm sensing distance, 2 mm dia. head)
DiffuseE32-D11L(400 mm sensing distance, M6 threaded head)
E32-D12(230 mm sensing distance, 3 mm dia. head)
E32-D16(40 to 700 mm sensing distance, 17.5 mm square head)
E32-D21L(130 mm sensing distance, M4 threaded head)
E32-D22L(130 mm sensing distance, 3 mm dia. head)
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-6 Indicates models available for fast delivery.
E32 Fiber-Optic Photo Sensors
Over 100 Fiber-Optic Sensor Cables cont.One exactly matches your requirements.
Transparent Object Detection• Fiber optic cables that are
polarized and reflectors specially designed for sensing small transparent objects in tight spaces
• Ideal for sensing lenses, clear plastics, and transparent packaging materials
General-Purpose Industrial Applications• For most sensing
applications, the space-saving combination of a fiber-optic amplifier and general-purpose fiber unit provides an economical solution.
Extreme Bending Applications• For machine applications that
require extreme bending of fiber optic cables to conform to tight spaces, Omron offers a variety of cables that feature a unique multi-core construction
• Multi-core design ensures optimal light transmission even when bent 180° with a bending radius of 1 mm, unlike single-core cables that can lose their light transmission capability when bent tightly
E32-R21
E3X-A11
E32-R21(Retroreflective,10–250 mm range)
E32-R16(Retroreflective, 150–1,500 mm range)
Through-BeamE32-TC200(760 mm sensing distance, M4 threaded head)
E32-TC200A(680 mm sensing distance, M3 threaded head)
DiffuseE32-DC200(300 mm sensing distance, M6 threaded head)
Through-Beam DiffuseE32-T11R E32-D11R(530 mm sensing distance, M4 threaded head)
(170 mm sensing distance, M6 threaded head)
E32-T12R E32-D12R(530 mm sensing distance, 3 mm dia. head)
(170 mm sensing distance, 3 mm dia. head)
E32-T14LR E32-D14LR(210 mm sensing distance, 3 mm dia. head)
(45 mm sensing distance, 6 mm dia. head, side view)
E32-T21R E32-D21R(130 mm sensing distance, M3 threaded head)
(30 mm sensing distance, M3 threaded head)
E32-T16WR E32-D22R(1300 mm sensing distance, 30 mm wide beam)
(30 mm sensing distance, 3 mm dia. head)
E32-T16JR E32-D24R(750 mm sensing distance, 11 mm wide beam, side view)
(15 mm sensing distance, 2 mm dia. head, side view)
E32-T16PR(840 mm sensing distance, 11 mm wide beam)
E32-T22R(130 mm sensing distance, 2 mm dia. head)
E32-T24R(50 mm sensing distance, 1 mm dia. head, side view)
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-7
E32-V Vacuum Chamber Fiber-Optic System
Solutions for Semiconductor Manufacturing • Confirm proper positioning of objects in vacuum chambers
with space-saving mounting flanges and in-chamber fiber-optic sensing heads/cables
• Ideal for semiconductor and biomedical vacuum and environmental chambers to confirm cassettes, wafers, slides and petri dishes are properly positioned for processing
• 4-channel mounting flange features one-touch fiber mounting reducing setup time and conserves space in the vacuum chamber
• 1-channel threaded flange available• Heat-resistant vacuum fiber (E32-T84SV) can be used up to
200°C• Cut outside fiber at both ends to avoid messy routing• Through-beam sensing heads fit E3X-DA-S, E3X-MDA and
E3X-NA amplifiers
Specifications• Sensing distances with E3X-DA-S fiber-optic amplifier in
standard mode:• E32-T51V: 200 mm• E32-T54V: 130 mm• E32-T84SV: 480 mm
• Compact system components:• 4-channel flange: 90 dia. x 49 D mm• 1-channel flange: 20 dia. x 96 D mm• Vacuum fibers: 1 m length• Outside fibers: 2 m length, freely cut
Vacuum Chamber Fiber-Optic System
E32-V B323
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-8 Indicates models available for fast delivery.
E3X-DA-S Fiber-Optic Photo Sensors
Digital Display Amplifier Automatically Optimizes Settings • Mount up to 16 sensors on DIN rail and program all of them
from a single point• Three inspection speeds/distances in one model: standard,
high-speed and high-resolution• Dual digital display can monitor current and preset values,
including digital, bar, percent, and hold display functions• Power tuning function addresses saturation or insufficient
light conditions• 4-element LED and Auto Power Control ensure stable, long
term performance• Advanced functions include differential operation for minute
object detection, 2 independent outputs for area detection, remote input function and counter function
• Threshold adjustment performed manually or by teaching• Built-in OFF-delay, ON-delay, one-shot timer (adjustable
from 1 ms to 5 s)• Optical communications ports built into each sensor enables
data exchange with one another and the Mobile Console remote control
• Rated IP50• Pre-wired (2 m cable) and wire-saving connector models
available• Requires E32 series fiber-optic cables
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 40 mA max.; 45 mA max. (E3X-DA-TWS and -RMS)• Control output: NPN or PNP, 50 mA at 30 VDC; Light-ON/Dark-ON operation switch selectable• Sensing distance in standard mode (red light source):
• Through-beam fiber cable E32-TC200: 760 mm• Diffuse fiber cable E32-DC200: 300 mm
• Color mark (green/blue light source):• Through-beam fiber cable E32-TC200: 75 mm• Diffuse fiber cable E32-DC200: 25 mm
• Response time:• 1 ms ON/1 ms OFF (standard mode)• 48 ms ON/50 ms OFF (high-speed mode); 80 ms for 2-output models• 4 ms ON/4 ms OFF (high resolution mode)
• Light source: Red LED (650 nm)• Green LED (525 nm) or Blue LED (470 nm) mark detection models
• Dimensions: 32 H x 10 W x 70 D mm
Fiber-Optic Photo Sensors
E3X-DA-S B324
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-9
E3X-DA-S Fiber-Optic Photo Sensors
Fiber-Optic Amplifiers
Pre-Wired with 2 m Cable
Connectors
Wire-Saving Connector Models• Streamlines installation and maintenance to reduce service
time• Unique connector design reduces wiring and space require-
ment because one master connector supplies power to all other slave connectors
• Detach the sensor without disturbing the fiber installation or output wiring for servicing Pre-wired models
require three wiring connections for each sensor.Shown: 15 wires plus extension connector wires.
The E3X-DA-S requires three wires for the master sensor only.Each additional sensor in a group requires only one wiring connection.Shown: ONLY 7 WIRES with no additional extension connectors.
Sensing heads
Setup Features Light source ModelNPN output PNP output
Order E32 fiber-optic cables separately
Standard Red (650 nm) E3X-DA11-S E3X-DA41-SMark detection Green (525 nm) E3X-DAG11-S E3X-DAG41-SMark detection Blue (470 nm) E3X-DAB11-S E3X-DAB41-STwo-outputs: Area output, self-diagnostics, different operation
Red (650 nm) E3X-DA11TW-S E3X-DA41TW-S
External input: Remote setting, counter, differential operation
Red (650 nm) E3X-DA11RM-S E3X-DA41RM-S
Sensing heads
Setup Features Light source ModelNPN output PNP output
Order E32 fiber-optic cables separately
Standard Red (650 nm) E3X-DA6-S E3X-DA8-SMark detection Green (525 nm) E3X-DAG6-S E3X-DAG8-SMark detection Blue (470 nm) E3X-DAB6-S E3X-DAB8-STwo-outputs: Area output, self-diagnostics, different operation
Red (650 nm) E3X-DA6TW-S E3X-DA8TW-S
External input: Remote setting, counter, differential operation
Red (650 nm) E3X-DA6RM-S E3X-DA8RM-S
Description Appearance Compatible amplifiers Cable length Conductors ModelMaster connector (for first unit)
E3X-DA6-S, E3X-DA8-S, E3X-DAG6-SE3X-DAG8-S, E3X-DAB6-S, E3X-DAB8-S
2 m 3 E3X-CN11
E3X-DA6TW-S, E3X-DA8TW-S, E3X-DA6RM-S, E3X-DA8RM-S
4 E3X-CN21
Slave connector (for second and additional units)
E3X-DA6-S, E3X-DA8-S, E3X-DAG6-S,E3X-DAG8-S, E3X-DAB6-S, E3X-DAB8-S
1 E3X-CN12
E3X-DA6TW-S, E3X-DA8TW-S,E3X-DA6RM-S, E3X-DA8RM-S
2 E3X-CN22
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-10 Indicates models available for fast delivery.
E3X-DA-S Fiber-Optic Photo Sensors
Accessories
Mobile Console• Program and monitor sensor operation with the mobile console• 1.5 m cable for remote setup connects console to the programming head• Programming head track mounts flush against the leftmost amplifier• AC adapter powers console
Mounting Bracket and Track
Description Appearance/dimensions Model
Mobile console kit Includes console, programming head, cable and AC adapter
E3X-MC11-SV2
Mobile console (only) 136 H x 52.8 W x 22 D mm E3X-MC11-C1-SV2
Programming console (only)mounts on DIN rail
51.3 H x 20 W x 30.3 D mm E3X-MC11-H1
Cable 1.5 m length E3X-Z12-1
Description Appearance Dimensions H x W x D mm Specification Model
Surface mounting bracket 7.3 H x 35 W x 12 D 304 stainless steel, fits the DIN track holder
E39-L143
Mounting track 500 L x 35 H x 7.3 D 0.5 m length PFP-50N
1000 L x 35 H x 7.3 D 1 m length PFP-100N
1000 L x 35 H x 16.0 D 1 m length PFP-100N2
End plate 50 x 10 x 10 Holds track-mounted devices in place
PFP-M
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-11
E3X-DAC-S Fiber-Optic Sensors
Easy and Reliable Digital Fiber-Optic Amplifier Offers True Color Detection• Reliability through precise and true color detection with white
LED emitter and RGB (Red, Green and Blue) processing• Enhanced stability: workpiece movement does not affect the
sensor as the receiver element processes light as a ratio to compensate for intensity variations
• Easy push button setup guides the user to place the workpiece in an appropriate position for teaching
• Full-functional, dual digital display can monitor current and preset values, including digital, bar, percent and hold display functions.
• On-Board timing function incorporating OFF-Delay, ON-delay, and one-shot timing functions (adjustable from 1 ms to 5 s)
• Advanced models offer remote control as well as twin sensing and output to simultaneously distinguish between two registered colors
• Pre-wired (2 m cable) and wire-saving connector models available
• Master/slave connector design affords connectivity for up to 16 wire and cost saving amplifiers
• Uses E32 family of fiber optics for a wide variety of applications
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 40 mA max.• Control output: NPN or PNP, 50 mA max.; Light-ON/Dark-
ON operation switch selectable• Operating mode:
• ON for match (ON for same color as registered color)• ON for mismatch (ON for different color from registered
color)• Sensing distance:
• Through-beam fiber cable E32-TC200: 200 mm (high resolution mode)
• Diffuse fiber cable E32-DC200: 70 mm (high resolution mode)
• Response time:• 60 µs operate or reset (super-high-speed mode)• 300 µs operate or reset (high-speed mode)• 1 ms operate or reset (standard mode)• 4 ms operate or reset (high-resolution mode)
• Light source: white LED (420 to 700 nm)• Dimensions: 31.5 H x 10 W x 70 D
Fiber-Optic Amplifiers
Pre-Wired with 2 m Cable
Fiber-Optic Sensors
E3X-DAC-S B325
Sensing heads Setup Features Model
NPN output PNP output
Order E32fiber-opticcables separately
Standard with timer, response speed change
E3X-DAC11-S E3X-DAC41-S
Advanced with simultaneous determination (2 colors) AND/OR output, remote setting
E3X-DAC21-S E3X-DAC51-S
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-12 Indicates models available for fast delivery.
E3X-DAC-S Fiber-Optic Sensors
With Wire Saving Connectors
Connectors
Mounting Bracket and Track
Sensing heads Setup Features Model
NPN output PNP output
Order E32fiber-opticcables separately
Standard with timer,response speed change
E3X-DAC6-S E3X-DAC8-S
Description Appearance Cable length Conductors Model
Master connector (for first unit)
2 m 3 E3X-CN11
Slave connector (for second and additional units)
1 E3X-CN12
Description Appearance Dimensions H x W x D mm Specification Model
Surface mounting bracket 7.3 H x 35 W x 12 D 304 stainless steel, fits the DIN track holder
E39-L143
Mounting track 500 L x 35 H x 7.3 D 0.5 m length PFP-50N
1000 L x 35 H x 7.3 D 1 m length PFP-100N
1000 L x 35 H x 16.0 D 1 m length PFP-100N2
End plate 50 x 10 x 10 Holds track-mounted devices in place
PFP-M
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-13
E3X-MDA Fiber-Optic Sensors
Two Digital Amplifiers in One Slim Unit with Built-In Logic• Two independent fiber-optic amplifiers in a 10-mm-wide track-mount unit• Designed for gang mounting up to 18 sensors (9 units)• Three inspection speeds/distances in one model: standard, high-speed and
high-resolution• Dual digital display can monitor current and preset values, including digital, bar,
percent, and hold display functions• Logical AND/OR control output for local control in high-speed applications• One-touch teaching or manual sensitivity setting• Threshold adjustment performed manually or by teaching• Built-in OFF-delay, ON-delay, one-shot timer (adjustable from 1 ms to 5 s)• Optical communications ports built into each sensor enables data exchange
with one another and the Mobile Console remote control• Rated IP50• Pre-wired (2 m cable) and wire-saving connector models available• Requires E32 series fiber-optic cables• DIN rail mounting
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 40 mA max.• Control output: NPN or PNP, 50 mA at 26.4 VDC; Light-ON/
Dark-ON operation switch selectable• Sensing distance in standard mode:
• Through-beam fiber cable E32-TC200: 500 mm• Diffuse fiber cable E32-DC200: 300 mm
• Response time:• 1 ms (standard mode)• 130 μs (high-speed mode)• 4 ms (long distance mode)
• Light source: Red LED (650 nm)• Dimensions: 32 H x 10 W x 70 D mm
Dual Amplifiers
Connectors
Fiber-Optic Sensors
E3X-MDA B326
Sensing heads Setup Features Light source Connection method
Model
NPN output PNP output
Order E32 fiber-optic cables separately
AND/OR logic output 3 sensing speeds
Red (650 nm) Pre-wired E3X-MDA11 E3X-MDA41
One master connector for ganged units
Connector E3X-MDA6 E3X-MDA8
Description Appearance Cable length Conductors Model
Master connector (for first unit) 2 m 4 E3X-CN21
Slave connector (for second and additional units)
2 E3X-CN22
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-14 Indicates models available for fast delivery.
E3X-MDA Fiber-Optic Sensors
Accessories
Mobile Console• Program and monitor sensor operation with the mobile console• 1.5 m cable for remote setup connects console to the programming head• Programming head track mounts flush against the leftmost amplifier• AC adapter powers console
Mounting Bracket and Track
Description Appearance/dimensions Model
Mobile console kit Includes console, programming head, cable and AC adapter
E3X-MC11-SV2
Mobile console (only) 136 H x 52.8 W x 22 D mm E3X-MC11-C1-SV2
Programming head (only) Mounts on DIN rail
51.3 H x 20 W x 30.3 D mm E3X-MC11-H1
Cable 1.5 m length E3X-Z12-1
Description Appearance Dimensions H x W x D mm Specification Model
Surface mounting bracket 7.3 H x 35 W x 12 D 304 stainless steel; fits the DIN track holder E39-L143
Mounting track 500 L x 35 H x 7.3 D 0.5 m length PFP-50N
1000 L x 35 H x 7.3 D 1 m length PFP-100N
1000 L x 35 H x 16.0 D 1 m length PFP-100N2
End plate 50 x 10 x 10 Holds track-mounted devices in place PFP-M
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-15
E3X-DRT21/SRT21/CIF11 Fiber-Optic Sensors
Fiber Amplifier Communication Units E3X-DRT21/SRT21/CIF11• Reduce wiring to communicate status from up to 16
fiber-optic sensors• DeviceNet, RS-422 serial and CompoBus/S remote I/O units• Compatible with E3X-DA6, -DA8, -DAB and -DAG fiber-optic
amplifiers• One contact input from a basic switch can be used in each
block (E39-TM1)• Mobile Console simplifies setting sensor parameters and
monitoring• Communication unit measures 34.5 H x 30 W x 71.3 D mm
Fiber-Optic Sensors
E3X-DRT21/SRT21/CIF11B327
E3X-DRT21for DeviceNet
E3X-SRT21for CompoBus/S
E3X-CIF11for RS-422
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-16 Indicates models available for fast delivery.
E3X-DRT21S Networking Solutions
Sensor Block Communication UnitConnect up to 16 sensors with this DeviceNet-ready commu-nication unit. A wide range of sensor models can be groupedtogether to match application needs.
• Reduce wiring to communicate status from up to 16 fiber-optic sensors
• DeviceNet, RS-422 serial and CompoBus/S remote I/O units• Compatible with E3X-DA6, -DA8, -DAB and -DAG fiber-optic
amplifiers• One contact input from a basic switch can be used in each
block (E39-TM1)• Mobile Console simplifies setting sensor parameters and
monitoring• Communication unit measures 34.5 H x 30 W x 71.3 D mm
Capabilities• Remote setting, monitoring and operating through CX-
Integrator software• Supports explicit message communications• Reduces wiring back to control cabinet• Compatible sensors with connector-type amplifier units:
• E3X-DA-S Series or E3X-MDA Series Digital Fiber-Optic Sensor Amplifier
• E3C-LDA Series Laser Photoelectric Sensor with sepa-rate digital amplifier
• E2C-EDA High-resolution Digital Proximity Sensor with separate amplifier
• Use the E3X-CN02 Cordless Slave Connector for eachsensor
• Mobile programming console for simple setting andmonitoring locally
• Send ON/OFF signals and incident light levels to the host PLC without any need for programming (using the RemoteI/O Communications Slave function)
• Threshold values and function settings can be read, written, or taught (using the Message Communications function)
• Device parameters prepared on a personal computer con-nected to the network can be downloaded in a batch opera-tion using the configurator in CX-Integrator
Ordering Information
Networking Solutions
E3X-DRT21S B327
Description Specifications Model
DeviceNet photoelectric sensor communication module 71.3 H x 30 W x 34.6 D mm E3X-DRT21S
Cordless slave connector Fits space saving connector models of sensor amplifiers E3X-CN02
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-17
E3X-DRT21S Networking Solutions
Configurations
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-18 Indicates models available for fast delivery.
E3X-SD Fiber-Optic Sensors
Simple, High Performance Fiber-Optic Amplifier with Digital Display• Streamlined features provide basic sensing immediately
after plug-in• Easy push button teach with or without workpiece• Large, 6 mm wide digital display provides read-out of
incident and operating level• Incident settings and management can be performed reliably
with 0 to 999% (10 times) fine tune adjustment• Built-in OFF-Delay, ON-delay, one-shot timer• Rated IP50• Pre-wired (2 m cable) and wire-saving connector models
available• Master/slave connector design affords connectivity for up to
16 wire-saving amplifiers• Requires E32 series fiber-optic cables
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 40 mA max.• Control output: NPN or PNP, 50 mA max.; Light-ON/Dark-
ON operation switch selectable• Sensing distance:
• Through-beam fiber cable E32-TC200: 400 mm• Diffuse fiber cable E32-DC200: 150 mm
• Response time: 200 μs• Light source: Red LED (620 nm)• Dimensions: 31.5 H x 10 W x 70 D
Fiber-Optic Amplifiers
Pre-Wired with 2 m Cable
With Wire Saving Connectors
Fiber-Optic Sensors
E3X-SD B334
Sensing heads Setup Features Model
NPN output PNP output
Order E32 fiber-optic cablesseparately
Standard E3X-SD11 E3X-SD41
Sensing heads Setup Features Model
NPN output PNP output
Order E32 fiber-optic cables separately
Standard E3X-SD6 E3X-SD8
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-19
E3X-SD Fiber-Optic Sensors
Connectors
Mounting Bracket and Track
Description Appearance Cable length Conductors Model
Master connector (for first unit)
2 m 3 E3X-CN11
Slave connector (for second andadditional units)
1 E3X-CN12
Description Appearance Dimensions H x W x D mm Specification Model
Surface mounting bracket 7.3 H x 35 W x 12 D 304 stainless steel, fits the DIN track holder
E39-L143
Mounting track 500 L x 35 H x 7.3 D 0.5 m length PFP-50N
1000 L x 35 H x 7.3 D 1 m length PFP-100N
1000 L x 35 H x 16.0 D 1 m length PFP-100N2
End plate 50 x 10 x 10 Holds track-mounted devices in place
PFP-M
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-20 Indicates models available for fast delivery.
E3X-NA Fiber-Optic Sensors
Amplifier with Bar Graph Display, Manual Adjustment• Streamlined features provide basic sensing immediately
after plug-in• Wire-saving amplifiers reduce installation time and minimize
space requirements• Master/slave connector design affords connectivity for up to
16 wire-saving amplifiers• Use the LED bar display to quickly confirm sensor
performance• Optical communication design prevents mutual interference
for up to 5 amplifiers• Green LED models address mark-detecting applications• High-speed models have a response time of 50 μs• Rated IP50• Water-resistant version rated IP66 available in pre-wired 2 m
cable models or M8 connector models
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 35 mA max.• Control output: NPN or PNP, 50 mA max.; Light-ON/
Dark-ON operation switch selectable• Sensing distance for standard models in standard mode:
• Through-beam fiber cable E32-TC200: 400 mm• Diffuse fiber cable E32-DC200: 150 mm
• Response time: 200 μs (standard and color mark models)• 20 μs ON/30 μs OFF (high-speed model)• OFF delay timer (fixed at 40 ms)
• Light source:• Red LED (680 nm) for standard, high-speed, and water-
resistant models• Green LED (520 nm) for mark detection
• Compact housings:• Pre-wired: 31.5 H x 10 W x 64.3 D mm• Water-resistant: 33 H x 12 W x 81.5 D mm
Fiber-Optic Sensors
E3X-NA B328
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-21
E3X-NH Fiber-Optic Sensors
High Precision Fiber Amplifier • Industry’s first sensor with a 16-bit processor• Automatic sensitivity adjustment feature allows for stable
detection of objects in frequently changing environments• Manual fine tuning allows 13 threshold adjustments, 8 level
sensitivity meter• Ideal for detecting small objects or fine wires• Pre-wired with 2 m cable• Enclosure rating: IP50• Mounts on DIN rail track
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 75 mA max.• Control output: NPN and PNP models, 50 mA max.;
Light-ON/Dark-ON operation, switch selectable• Sensing distance:
• Through-beam fiber cable E32-TC200: 300 mm• Diffuse fiber cable E32-DC200: 150 mm
• Response time: 1 ms max.• Sensitivity setting: Teaching method• Light source: Red LED (680 nm)• Compact housing: 32.5 H x 10 W x 65 D mm• Requires E32 fiber-optic cables sold separately
Fiber-Optic Sensors
E3X-NH B329
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-22 Indicates models available for fast delivery.
E3X-NT/-NM Fiber-Optic Sensors
Auto-Tuning Fiber Amplifier • Single fiber-optic amplifier (E3X-NT) and four-amplifier block
(E3X-NM) models• Pushbutton teaching for sensitivity adjustment simplifies
setup and maintenance• Four amplifiers in a single housing saves space and wiring• Four fiber-optic cables can be mounted directly next to each
other without mutual interference• Enclosure rating: IP50
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 50 mA max. single; 150 mA max.
4-amp model• Control output: NPN or PNP, 100 mA at 30 VDC; Light-ON/
Dark-ON operation, switch selectable• Sensing distance for single amp (E3X-NT):
• Through-beam fiber cable E32-TC200: 210 mm• Diffuse fiber cable E32-DC200: 110 mm
• Sensing distance for 4-amp (E3X-NM):• Through-beam fiber cable E32-TC200: 200 mm• Diffuse fiber cable E32-DC200: 100 mm
• Response time: 500 ms• Light source: Red LED (680 nm)• Compact housings:
• Single amp: 32.5 H x 10 W x 65 D mm• 4-amp model: 33 H x 32.2 W x 65.2 D mm
• Requires E32 fiber-optic cables sold separately
Fiber-Optic Sensors
E3X-NT/-NM B332
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca J-23
E3X-NV/NVG Fiber-Optic Sensors
Water-Resistant Fiber Amplifier • Teach function with No-object teaching capability speeds
setup• Remote teaching function for easy teaching from a controller• Water resistant, rated IP66 to withstand light washdown• Pre-wired with 2 m cable• Mounts on DIN rail track
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 50 mA max.• Control output: NPN open collector, 100 mA load; Light-ON/
Dark-ON operation, switch selectable• Sensing distance, red light source (E3X-NV):
• Through-beam fiber cable E32-TC200: 210 mm• Diffuse fiber cable E32-DC200: 110 mm
• Sensing distance, green light source (E3X-NVG):• Through-beam fiber cable E32-TC200: 18 mm• Diffuse fiber cable E32-DC200: 10 mm
• Response time: 500 ms max.; 40 ms with OFF-delay timer• Sensitivity setting: Teaching method• Light source: Red LED (680 nm); green LED (565 nm)• Dimensions: 32 H x 12 W x 65 D mm• Requires E32 fiber-optic cables sold separately
Compact Metal Body Fiber Amplifier• Diecast housing withstands rugged use• Mutual interference protection permits side-by-side
mounting• Rated NEMA 4X/IP66• Pre-wired with 2 m cable, includes mounting bracket
Specifications• Supply voltage: 12 to 24 VDC• Current consumption: 50 mA max.• Control output: Light-ON/Dark-ON operation, selectable
• NPN open collector with 80 mA load• PNP open collector, 100 mA load
• Sensing distance:• Through-beam fiber cable E32-TC200: 120 mm• Diffuse fiber cable E32-DC200: 50 mm
• Response time: 1 ms max.• Sensitivity setting: Multi-turn potentiometer• Light source: Red LED• Dimensions: 20 H x 23 W x 70 D mm• Requires E32 fiber-optic cables sold separately
Fiber-Optic Sensors
E3X-NV/NVG B333
Fiber-Optic Sensors
E3S-X3 B335
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]
J-24 Indicates models available for fast delivery.
E3A2-X Fiber-Optic Sensors
Universal Voltage Fiber Amplifier, Replaceable Output • Universal AC/DC supply voltage• Plug-in interchangeable outputs• Rated NEMA 4/IP66• Easy-to-wire terminal strip wiring; standard 1/2-14 NPT
conduit opening• Time delay models available• Mounting hardware included
Specifications• Supply voltage: 24 to 240 VAC, 50/60 Hz; 12 to 240 VDC• Current consumption: 1.5 W/2 VA max.• Control output: Light-ON/Dark-ON operation, switch
selectable• Relay, 3 A at 250 VAC/30 VDC (supplied)• SCR, 200 mA at 250 VAC (optional)• NPN or PNP complementary, 200 mA at 30 VDC
(optional)• Sensing distance:
• Through-beam fiber cable E32-TC200: 120 mm• Diffuse fiber cable E32-DC200: 50 mm
• Response time:• 15 ms max. (Relay)• 30 ms max. (AC SCR)• 1 ms max. (DC SSR)
• Sensitivity setting: Multi-turn potentiometer• Light source: Red LED• Dimensions: 75 H x 26 W x 75.3 D mm• Requires E32 fiber-optic cables sold separately
Fiber-Optic Sensors
E3A2-X B336
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ Web : www.A-Aelectric.com Email: [email protected]