fiberglass tank and accessory fiberglass tank … (rev3b).pdfto handle (saving up to 16 pounds per...
TRANSCRIPT
FIBERGLASS TANK AND ACCESSORY REFERENCE GUIDEFIBERGLASS TANK AND ACCESSORYPRODUCT REFERENCE GUIDE
FEA
TURE
S &
BEN
EFIT
S
Operating Parameters: Maximum operating pressure: 150 psi/10 Bar
Maximum operating temp: 120˚F/50˚C
Design Parameters: 250,000+ cycles, 0 to 150 psi, without leakage
4:1 safety factor (600 psi minimum burst)
Stress Rupture: minimum 1,000 hours at 150˚F and 150 psi static pressure
Available in 5 standard colors: Natural, Blue, Almond, Grey, Black
Custom colors available upon request
Inner Shell Material: Co-polymer polypropylene
Custom formulation provides superior performance in both hot and cold temperature environments
Superior elasticity of polypropylene allows for controlled ‘breathing’ without stressing the material
Base: Injection molded impact/temperature resistant
polypropylene
Injection Molded Top and Bottom Domes: Precision molding process produces consistent, part-to-part quality
Uniform wall thickness provides optimum glass and inlet performance
High temperature/high pressure injection molding allows the glass-filled thread-ed inlet to be mechanically and chemically welded to the dome, eliminating potential leak paths
Extruded Side Wall: Produces consistent wall thickness over the entire length of the part,
eliminating potential thin spots or stress points
Computer controlled cut provides consistent lengths within 0.180 inches from part-to-part
Fiberglass / Epoxy Winding: All vessels are precision wound with premium fiberglass roving on a
computer controlled, 4 axis winder to optimize material and glass yield and performance
Epoxy laminate is oven-cured to exacting specifications for superior environmental performance
SpecificationsResinTech has partnered with major fiberglass tank distributors to provide the best variety and availability of composite pressure vessels and accessories for water treatment systems. With distribution available from multiple locations throughout the United States orders will be completed and shipped promptly. ResinTech is proud to offer and represent this cutting edge technology as a complement to the ion exchange resin and activated carbon product line.
• State-of-the-art Design Injection molded heads and polypropylene liners,manufactured to thetightest tolerances
• High Impact ConstructionBuilt to withstand the rigors of portable exchange service
• Strong and LightweightUp to 16 pounds lighter than competitive brands (14 x 47)
• Base Designed for Rolling Safely and easily move tanks across the floor at the customer’s location andin the shop
TankThe use of a special high temperature, high pressure injection process results in a durable tank that exhibits superior abuse and impact resistance. The glass-filled threaded inlet is mechanically and chemically welded to the dome so potential leak paths are eliminated. The manufacturing process incorporates computer controlled cut-lengths to achieve the most consistent vessel height in the industry, with tolerances as low as 3/16”. Tank inlets accept all 2.5” NPSM, 4” UN, and 4.5” buttress-threaded inlets and heads. All tanks are backed by an exclusive 5 year limited warranty for non-permanent DI applications.
LinerAll tanks feature an industry exclusive co-polymer polypropylene liner formulation that provides superior performance in both hot and cold environments, along with superior impact and abuse resistance.
BaseThe revolutionary base design provides a significant weight reduction as com-pared to traditional rubber bases, making the tank system lightweight and easy to handle (saving up to 16 pounds per vessel!) The poly bases provide full sup-port of the bottom dome of the vessel and have an integrated rib that facilitates rolling the tank across the floor. No more struggles of rolling a flat tire-like vessel across the floor. Also, the tank bases have integrated ribs and glue points that allow for uniform gluing of the boot to the tank, keeping the tank level and preventing the base from coming off.
Features & Benefits
FIBE
RGLA
SS T
AN
K O
RDER
ING
GU
IDE
ResinTech composite pressure vessels for use in Portable Exchange Deionization (PEDI) provides flexible configurations and rapid deployment of ion exchange systems.
DI Exchange Tanks
Commercial TanksTank Size(ø x h in.)
Opening (ø in.)
Carton Quantity
Single Tank List PricePart Number
FT-2162-40-SS 21 x 62 4.0 Stainless Steel 1 781.21FT-2472-25-SS 24 x 72 2.5 Stainless Steel 1 1,199.76
Standard Tanks
FT-724-25 7 x 24 2.5 24 85.29 106.66FT-730-25 7 x 30 2.5 24 85.29 106.66FT-735-25 7 x 35 2.5 24 89.16 110.52FT-744-25 7 x 44 2.5 24 89.16 110.52FT-818-25 8 x 18 2.5 28 75.82 75.82FT-824-25 8 x 24 2.5 32 94.12 115.49FT-830-25 8 x 30 2.5 18 94.12 115.49FT-835-25 8 x 35 2.5 18 94.12 94.12FT-840-25 8 x 40 2.5 18 94.53 115.90FT-844-25 8 x 44 2.5 18 97.22 97.22FT-918-25 9 x 18 2.5 28 86.19 86.19FT-935-25 9 x 35 2.5 18 103.93 125.30FT-940-25 9 x 40 2.5 14 118.41 139.78FT-942-25* 9 x 42 2.5 16 134.96 134.96FT-948-25 9 x 48 2.5 16 118.41 118.41FT-1018-25 10 x 18 2.5 48 115.11 136.48FT-1022-25 10 x 22 2.5 32 115.11 136.48FT-1024-25 10 x 24 2.5 32 115.11 136.48FT-1030-25 10 x 30 2.5 12 115.11 136.48FT-1035-25 10 x 35 2.5 12 115.11 115.11
FT-1040-25 10 x 40 2.5 12 118.16 118.16FT-1044-25 10 x 44 2.5 12 125.21 146.58
FT-1047-25 10 x 47 2.5 14 135.60 156.97FT-1054-25 10 x 54 2.5 16 135.60 135.60FT-1060-25 10 x 60 2.5 1 - 171.41FT-1065-25 10 x 65 2.5 1 - 171.41FT-1229-25 12 x 29 2.5 9 149.81 171.18FT-1229-40 12 x 29 4.0 9 151.30 172.67FT-1236-25 12 x 36 2.5 9 152.87 174.24FT-1236-40 12 x 36 4.0 9 154.40 175.77FT-1236-45-B* 12 x 36 4.5 Buttress 9 261.65 261.65FT-1242-25* 12 x 42 2.5 9 174.10 174.10FT-1242-40 12 x 42 4.0 9 159.12 180.49
FT-1242-45-B* 12 x 42 4.5 Buttress 9 269.67 269.67FT-1244-25 12 x 44 2.5 9 162.42 183.78FT-2144-40 12 x 44 4.0 9 164.05 185.41FT-1248-25 12 x 48 2.5 9 167.91 189.27FT-1248-40 12 x 48 4.0 9 169.59 190.96FT-1252-25 12 x 52 2.5 9 174.82 196.19FT-1252-40 12 x 52 4.0 9 176.55 197.92FT-1252-45-B* 12 x 52 4.5 Buttress 9 301.03 301.03FT-1330-25 13 x 30 2.5 12 166.54 187.91FT-1335-25 13 x 35 2.5 12 166.54 187.91FT-1344-25 13 x 44 2.5 9 183.00 204.37
FT-1348-25 13 x 48 2.5 9 183.00 204.37FT-1354-25 13 x 54 2.5 9 221.65 200.28FT-1360-25 13 x 60 2.5 1 - 259.76FT-1365-25 13 x 65 2.5 1 - 259.76FT-1430-25 14 x 30 2.5 10 270.93 292.30FT-1430-40 14 x 30 4.0 10 270.93 295.04FT-1447-45-B* 14 x 47 4.5 Buttress 8 - 366.33FT-1454-25 14 x 54 2.5 8 270.93 292.30
FT-1545-40 14 x 54 4.0 8 273.67 295.04FT-1464-25 14 x 65 2.5 1 - 314.16FT-1465-40 14 x 65 4.0 1 - 317.32FT-1465-45* 14 x 65 4.5 Buttress 1 - 421.48
FT-1623-25 16 x 23 2.5 1 - 287.85FT-1628-25 16 x 28 2.5 1 - 287.85FT-1636-25 16 x 36 2.5 1 - 331.29FT-1636-40 16 x 36 4.0 1 - 334.19
FT-1644-25 16 x 44 2.5 1 - 331.29 FT-1644-25 16 x 44 4.0 1 - 334.19
FT-1653-25 16 x 53 2.5 1 - 351.59FT-1653-40 16 x 53 4.0 1 - 355.15FT-1665-25 16 x 65 2.5 1 - 351.59FT-1665-40 16 x 65 4.0 1 - 355.15
7”
12”
8”
9”
10”
13”
14”
16”
Tank Size(ø x h in.)
Opening (ø in.)
Carton Quantity
Carton List Price
Single Tank List Price†
PartNumber
* Price includes bumper band Tanks listed in Bold denote In Stock items
† Side openings unavailable†† Single Carton Cost added for less than bulk pack quantities
7”-10” 2.5” NPSM 33.8012” 2.5”NPSM or 4”UN 59.17
13” 2.5”NPSM 73.9114” 2.5”NPSM or 4”UN 90.0616” 2.5”NPSM or 4”UN 128.04
BOTTOM OPENING OPTIONS†
Tank Size(ø in.)
Opening (ø in.)
List Price
7” 25.19 8” 28.63 9” 33.41 10” 64.51 12” 83.32 13” 100.40 14” 110.67 16” 133.35
EXTENDED BASE OPTIONS
14” 146.86 16” 167.68
SUPER EXTENDED BASE OPTIONS
7”-14” 19.86BUMPER BAND OPTION
10” 1-1/4” w/Closure 74.3312”-13” 1-1/4” w/Closure 89.07
Options
DOME HOLE OPENING
Closures and adapters Suitable for standard tank openings from 2.5” to 4.5”
Distribution Systems Inlet screens and baffles, and outlet stacked screens. For both top mount and side mount valve designs
Inlet / Outlet Connections Quick disconnects for portable exchange systems
Stainless Steel Reinforced NPT Connections The XPI and XPA Series Tank heads include stainless steel banded inlet and outlet ports for extra strength and reliability
Resistivity lights Test Lights are designed for economical and reliable monitoring of water resistivity. The neon lamp glows green when resistivity is above the threshold quality value, and red when the resistivity drops below
The ResinTech line of fittings and accessories are designed to complement the ResinTech tank line and make design options economical and flexible. We offer a variety of injection molded parts to suit all commercial and industrial applications.
TAN
K H
EAD
S & K
ITS
Products listed in Bold denote In Stock items
Tank Heads
TH-WPE-50-OR 2.5” 3/4” Horizontal 3/4” 1/2” offset - - 26.04TH-WPE-81-OR 2.5” 3/4” Horizontal 3/4” 13/16 offset - - 26.04TH-WPE-50-IS-OR 2.5” 3/4” Horizontal 3/4” 1/2” offset Yes .012” 36.55TH-WPE-50-IS-OR (White) 2.5” 3/4” Horizontal 3/4” 1/2” offset Yes .012” 36.55
TH-WPE-81-IS-OR 2.5” 3/4” Horizontal 3/4” 13/16” offset Yes .012” 36.55TH-WPCH-50-BAS-OR 2.5” 3/4” Horizontal - 1/2” center Basket .015” 36.55
TH-WPCH-81-BAS-OR 2.5” 3/4” Horizontal - 13/16” center Basket .015” 36.55TH-WPCH-75-BAS-OR 2.5” 3/4” Horizontal - 3/4” center Basket .015” 36.55TH-WPCH-100-BAS-OR 2.5” 3/4” Horizontal - 1” center Basket .015” 38.86TH-XPI-25-2-50-SS-IS-OR 2.5” 3/4” Vertical - 1/2” offset Yes .012” 52.51TH-XPI-25-3-50-SS-IS-OR 2.5” 3/4” Vertical 3/4” 1/2” offset Yes .012” 55.24TH-XPI-25-2-81-SS-IS-OR 2.5” 3/4” Vertical - 13/16” offset Yes .012” 52.51TH-XPI-25-3-81-SS-IS-OR 2.5” 3/4” Vertical 3/4” 13/16” offset Yes .012” 55.24TH-XTA-45-3-1IS-SS-FC-OR 4.5” 1” Vertical 1” 1” offset Yes .015” 44.53TH-XTA-45-3IS-SS-FC-OR 4.5” 1” Vertical 1-7/8” 1”offset Yes .015” 48.73
Manifold (ø in.)
Inlet/Outlet (NPT)
Inlet/Outlet Orientation
Fill Port (NPT) List PricePart
Number Inlet ScreenRiser (ø in.)
Slot Clearance (in.)
Tank Heads
WPE Series 3/4” inlet/outlet/fill ports
.012” inlet screen 1/2” or 13/16” offset riser
WPCH-100 Series 1” inlet/outlet
.015” basket inlet screen 3/4” or 1” center riser
WPCH Series 3/4” inlet/outlet
.015” basket inlet screen 1/2” or 13/16” center riser
XPI Series 3/4” inlet/outlet/fill ports
.012” inlet screen 1/2” or 13/16” offset riser
XTA Series (2) 1” NPT inlet/outlet
1-7/8” fill port with cap Riser ø: 1” (1.31” ID)
XTA Series (2) 1” NPT inlet/outlet
1” fill port Riser ø: 1” (1.31” ID)
Tank KitsTank kits are available in a variety of configurations and ready for quick shipment and easy setup. Tank kits include specified tank, head, riser, distribution screen. Media and quick connect fittings sold separately.
TK-818-25-WPE 8 x 18 2.5 TH-WPE-81-IS-OR TH-DS-190-81 13/16” 0.45 $110.00TK-818-25-WPCH 8 x 18 2.5 TH-WPCH-81-IS-OR TH-DS-190-81 13/16” 0.45 $110.00TK-818-25-XWPCH 8 x 18 2.5 TH-XWPCH-81-IS-OR TH-DS-190-81 13/16” 0.45 $110.00TK-818-25-XPI 8 x 18 2.5 TH-XPI-81-IS-OR TH-DS-190-81 13/16” 0.45 $110.00TK-942-25-WPE 9 x 42 2.5 TH-WPE-81-IS-OR TH-DS-190-81 13/16” 1.38 $155.73TK-942-25-WPCH 9 x 42 2.5 TH-WPCH-81-IS-OR TH-DS-190-81 13/16” 1.38 $155.73TK-942-25-XWPCH 9 x 42 2.5 TH-XWPCH-81-IS-OR TH-DS-190-81 13/16” 1.38 $155.73TK-942-25-XPI 9 x 42 2.5 TH-XPI-81-IS-OR TH-DS-190-81 13/16” 1.38 $155.73TK-1242-25-WPE 12 x 42 2.5 TH-WPE-81-BAS-OR TH-DS-190-81 13/16” 2.5 $300.00TK-1242-25-WPCH 12 x 42 2.5 TH-WPCH-81-BAS-OR TH-DS-190-81 13/16” 2.5 $300.00TK-1242-25-XWPCH 12 x 42 2.5 TH-XWPCH-81-BAS-OR TH-DS-190-81 13/16” 2.5 $300.00TK-1242-25-XPI 12 x 42 2.5 TH-XPI-81-BAS-OR TH-DS-190-81 13/16” 2.5 $300.00TK-1242-45-XTA-1 12 x 42 4.5 TH-XTA-45-3-1IS-SS-FC-OR TH-DDS-4 1” 2.5 $325.00TK-1447-45-XTA-1 14 x 47 4.5 TH-XTA-45-3-1IS-SS-FC-OR TH-DDS-4 1” 3.6 $425.00
Tank Size (ø in.)
Tank Opening (ø in.) Tank Head Single Tank
List PricePart
NumberVolume(cu.ft.)Distribution Screen Riser
TH-DS-4 Stack ø: 3.825”
For 1” riser (1.31” ID offset)
TH-DDS-4 Stacked outlet screen
Stack ø.: 3.825” Stack hgt: 2.6285”
Slot clearance: .012” For 1” riser (1.31” ID) offset
TH-DS-190 Stacked outlet screen for 2.5”
manifold assemblies Riser ø.: 1/2”, 3/16”, 3/4”
Slot clearance: .012”
TH-DS-100 Stacked outlet screen
Riser ø.: 1.0” (1.31” ID) Slot clearance: .012
Typical Tank Assembly
Tank Head
Fiberglass Tank
PVC Riser Pipe
High Density PolypropyleneEasy Roll Base
Quick ConnectFittings
Distribution Screen
Inlet Screen
Polypropylene Liner
DIS
TRIB
UTI
ON
SCR
EEN
S A
ND
ACC
ESSO
RIES
1/2” 13/16” 1”
Accessories (Fittings, Fill Plugs, O-Rings)
Part Number Description List Price
TF-MA-100 1” Male Adapter 6.72
TF-UMA-100 1” Union x Male Adapter 10.92
TF-HB-100 1” Union Adapter x Hose Barb 6.72
TF-UHB-100 1” Union x Hose Barb 10.92
TF-MA-75 .75” Male Adapterx 6.72
TF-UMA-75 .75” Union x Male Adapter 10.92
TF-HB-75 .75” Union Adapter x Hose Barb 6.72
TF-UHB-75 .75” Union x Hose Barb 10.92
TF-CAP-MA Dust Cap (Black) 3.36
TF-PLUG-UN QD Union Dust Cap (Black) 3.78
TH-FC-75-WPE WPE Fill Cap (Black) 1.89
TH-FC-75-PI XPI Fill Cap (Black) 1.89
TH-FC-178 XTA Threaded Fill Cap (Black) 4.20
TF-OR-75 XPI O-Ring for Fill Cap 0.80
TF-OR-215 Quick Disconnect O-Rings 0.80
TF-OR-225 XTA Fill Cap O-Ring for Fill Cap 0.80
TF-OR-337 2.5” Tank O-Ring 0.80
TF-OR-352 4.5” Tank O-Ring 2.68
INPUT: 120V AC 60Hz 5WOUTPUT: 9V DC 200mA
CLASS 2 TRANSFORMERAC ADAPTOR
UL UL LISTED
MODEL: 35-9-200EAI 363 9121
MADE IN CHINA
EFFICENCY LEVEL The listed resistivity lights are 110V 50/60Hz with red/green indicator lights and 1/2” NPT threads. 3/4” NPT thread lights are available upon request.
CL-1MG-50 1MΩ Resistivity Light 1/2” NPT 164.39
CL-200K-50-115V 200KΩ Resistivity Light 1/2” NPT 164.39
CL-20K-50 20KΩ Resistivity Light 1/2” NPT 164.39
CL-2MG-50-110V 2 MΩ Resistivity Light 1/2” NPT 164.39
CL-50K-50 50KΩ Resistivity Light 1/2” NPT 164.39
Part Number Description NPT Size List Price
Resistivity lights
TH-DS-4 DS-4 (1 Stack. 1”) Dist. Screen 15.75
TH-DS-4150-SE DS-4 (1 Stack, 1.5”) Dist. Screen 15.75
TH-DDS-4 DDS-4 (2 Stack, 1”) Dist. Screen 25.20
TH-DDS-4150-SE DDS-4 (2 Stack, 1.5”) Dist. Screen 25.20
TH-DS-190-50 Stacked Outlet Screen (1/2”) 6.72
TH-DS-190-75 Stacked Outlet Screen (3/4”) 6.72
TH-DS-190-81 Stacked Outlet Screen (13/16”) 6.72
TH-DS-100 Stacked Outlet Screen (1”) 8.40
Part Number Description List Price
Distribution Screens (Inlet, Outlet, Diffusers)
TF-PVC-50-1 PVC Pipe for 1/2” heads, (price per ft) 1.07
TF-PVC-81-1 PVC Pipe for 13/16” heads, (price per ft) 3.21
TF-PVC-100-1 PVC Pipe for 1” heads, (price per ft) 1.87
Part Number Description List Price
PVC Riser Pipe (cut to size)
Products listed in Bold denote In Stock items
Note: All data is for reference only and is subject to change without notice
A. Tank Diameter (inches)B. Tank Height (w/o base)C. Tank Height (w/ base)D. Capacity Gallons (liters)E. Capacity (cubic feet)F. Weight (empty w/ base)
A
C
B
TECHN
ICA
L DA
TA
7 x 24 23.1 (587) 23.6 (599) 3.4 (12.9) 0.45 4.37 x 30 29.4 (747) 30.4 (772) 4.4 (16.7) 0.59 5.17 x 35 34.4 (874) 34.9 (886) 5.0 (18.9) 0.67 5.77 x 44 43.8 (1113) 43.8 (1113) 6.5 (24.6) 0.87 6.98 x 18 17.9 (455) 18.4 (467) 3.2 (12.1) 0.43 4.48 x 24 23.1 (587) 23.5 (597) 4.3 (16.3) 0.57 5.18 x 30 29.4 (747) 29.9 (759) 5.7 (21.6) 0.76 6.08 x 35 34.4 (874) 34.9 (886) 6.6 (25.0) 0.88 6.78 x 40 39.3 (998) 39.8 (1011) 7.6 (28.8) 1.02 7.48 x 44 43.7 (1110) 44.2 (1123) 8.5 (32.2) 1.14 8.09 x 18 17.9 (455) 18.4 (470) 4.0 (15.1) 0.53 5.09 x 35 34.4 (874) 34.8 (884) 8.3 (31.4) 1.11 8.29 x 40 39.7 (1008) 40.3 (1024) 9.8 (37.1) 1.31 9.09 x 42 41.7 (1059) 42.3 (1074) 10.3 (39.0) 1.38 9.39 x 48 47.8 (1214) 48.3 (1227) 11.9 (45.0) 1.59 10.610 x 18 17.9 (455) 18.5 (470) 4.8 (18.2) 0.64 5.910 x 22 21.4 (544) 22.0 (559) 5.9 (22.3) 0.79 6.610 x 24 23.1 (587) 23.7 (602) 6.6 (25.0) 0.88 7.010 x 30 39.4 (747) 30.0 (762) 8.6 (32.6) 1.15 8.410 x 35 34.4 (874) 35.0 (889) 10.3 (39.0) 1.38 9.410 x 40 39.9 (1013) 40.6 (1031) 12.1 (45.8) 1.62 10.510 x 44 43.5 (1105) 44.3 (1125) 13.3 (50.3) 1.78 11.410 x 47 46.4 (1179) 47.2 (1199) 14.2 (53.8) 1.90 12.010 x 54 53.8 (1367) 54.4 (1382) 16.5 (62.5) 2.21 13.510 x 60 59.9 (1521) 60.6 (1539) 18.7 (70.8) 2.50 14.910 x 65 64.4 (1637) 65.1 (1654) 20.1 (76.1) 2.69 15.812 x 29 28.9 (734) 29.5 (749) 12.1 (45.8) 1.62 10.812 x 36 35.7 (907) 36.3 (922) 15.1 (57.2) 2.02 12.612 x 40 39.1 (993) 39.8 (1011) 16.8 (63.6) 2.25 13.512 x 42 41.7 (1059) 42.4 (1077) 18.0 (68.1) 2.41 14.212 x 44 43.8 (1113) 44.5 (1130) 18.9 (71.6) 2.53 14.712 x 48 47.8 (1214) 48.5 (1232) 20.8 (78.7) 2.78 15.812 x 52 52.1 (1323) 52.8 (1341) 22.9 (86.6) 3.06 16.913 x 30 29.4 (747) 30.0 (762) 14.6 (55.3) 1.95 12.013 x 35 34.5 (876) 35.1 (892) 17.5 (66.2) 2.34 14.113 x 44 43.6 (1107) 44.4 (1128) 22.7 (85.9) 3.03 17.913 x 48 47.6 (1209) 48.3 (1227) 24.9 (94.3) 3.33 19.513 x 54 53.6 (1361) 54.3 (1379) 28.0 (106.0) 3.74 21.813 x 60 69.9 (1521) 60.6 (1539) 31.7 (120.0) 4.24 24.313 x 65 64.4 (1636) 65.1 (1654) 34.3 (129.8) 4.59 26.014 x 30 39.1 (740) 30.1 (765) 16.1 (60.8) 2.15 14.914 x 47 46.9 (1191) 47.9 (1216) 27.3 (103.5) 3.65 22.514 x 54 53.1 (1349) 54.1 (1375) 31.2 (118.1) 4.17 24.714 x 65 64.1 (1629) 65.1 (1654) 38.1 (144.3) 5.10 29.014 x 72 71.1 (1807) 72.1 (1832) 42.6 (161.3) 5.69 31.816 x 23 23.1 (587) 15.4 (58.3) 2.06 17.016 x 28 28.0 (711) 19.5 (73.8) 2.61 18.516 x 36 36.5 (927) 27.1 (102.6) 3.62 21.016 x 44 44.25 (1124) 33.9 (128.3) 4.53 25.016 x 53 53.3 (1353) 41.7 (157.9) 5.57 21.016 x 65 64.7 (1643) 51.7 (195.7) 6.91 33.021 x 62 67.0 (1702) 84.0 (318.0) 11.23 102.024 x 72 73.1 (1857) 115.0 (435.3) 15.37 127.0
7”
8”
9”
10”
12”
13”
14”
16”
21”
24”
ECubic Feet
FPounds
Tank Size
BInches (mm)
CInches (mm)
DInches (mm)
AInches
Ratings and specifications may not be fully applicable under pressurized appli-cations. Chemicals that do not normally attack plastics may do so when under thermal and/or mechanical stress. This information offered in good faith, not as a guarantee of suitability or fitness for use.
CHEM
ICA
L RESISTAN
CE & SPECIFIC
ATIO
NS
Chemical Description ABS PP PEAcetic acid 4 1 1
Amines 2 1 1
Ammonia (< 28%) 1 1 1
Ammonium salts 1 1 1
Amyl alcohol & salts 4 4 3
Aqua Regia 4 4 4
Barium salts 1 1 1
Benzene 4 4 3
Bio Diesel 2 3 2
Bleach 5% 1 1 1
Bleach 12% 2 1 2
Calcium salts 1 1 1
Carbon tetrachloride 4 4 3
Caustic 50% 1 1 1
Caustic Potash 40% 1 1 1
Chlorinated hydrocarbons 4 2 3
Chromic acid(<10%) 2 1 1
Citric acid 1 1 1
Copper salts 1 1 1
Detergents 1 1 1
Ethanol 2 1 1
Ethylene Glycol 2 1 1
Ferrous/ferric salts 1 1 1
Fluosilicic acid 2 1 1
Formaldehyde 1 1 1
Gasoline 4 4 2
Glycerine 1 1 1
Hydrazine 3 2 2
Hydrochloric acid 2 1 1
Hydrofluoric acid 4 1 1
Hydrogen peroxide 2 1 1
Hydrogen sulfide 2 1 1
Iodine 4 2 3
Isopropyl alcohol 3 1 1
Lead salts 1 1 1
Lithium salts 1 1 1
Magnesium salts 1 1 1
Mercury salts 1 1 1
Methanol 3 1 2
Nickel salts 1 1 1
Nitric acid 10% 3 1 2
Nitric acid 30% 4 1 2
Nitric acid 70% 4 4 3
Ozone 3 3 3
Peracetic acid 4 3 2
Phenol 4 3 2
Phosphoric acid 2 1 1
Potassium salts 1 1 1
Potassium hydroxide 1 1 1
Sodium salts 1 1 1
Sodium hydroxide 1 1 1
Sulfamic acid 2 1 1
Sulfuric acid 30% 1 1 1
Sulfuric acid 70% 3 1 2
Sulfuric acid 93%+ 4 2 2
TCE & PCE 4 3 3
Zinc salts 1 1 1
Chemical Resistance
1 Excellent up to max temp for plastic2 Good, may be limited at high temperatures3 | Poor, but may have limited resistance in some applications4 Not recommended, limited, or no resistance
ABS Acrylonitrile butadiene styrene 120˚F / 49˚CPP* Polypropylene 180˚F / 82˚CPE Polyethylene 140˚F / 60˚C
Maximum Temperatures
Resistance RatingCaution: Use these ratings as a guide only.
For more information contact ResinTech Technical Support
p - 856.768.9600 f - 856-768-9601
e [email protected] resintech.com
ResinTech Inc., an acknowledged leader in ion exchange, manufactures a broad range of ion exchange resins for water and waste water treatment, including deionization,softening, metals removal, product purification, resource recovery, and pollution control.
ResinTech has developed an application technology resource group that includes state-of-the-art laboratories and a group of scientists dedicated to expanding the frontiers of applica-tion technology. This group is put to use whenever product or process recommendations are requested, assuring custom-ers get the most cost-effective approach to achieving their process goals.
e - [email protected] w - resintech.com
160 Cooper Road West Berlin, New Jersey USA
856.768.9600