fibre optic cable accessories
TRANSCRIPT
1Fibre optic cable accessories
Fibre optic cable accessories
2 3Fibre optic cable accessories2 3Fibre optic cable accessories
www.draka.fi
Draka Comteq Finland
Draka designs, manufactures and supplies cables and accessories and offer its products and related services to telecommunications, electricity trans-mission, construction and other industries. Draka is largest producer of optical fibre cables and datacom cables in Europe and one of the leading producers of mobile network cables in the world. Draka is also the biggest multi mode fibre and second largest single mode fibre producer in the world.
The information expressed in this document must not be copied or reproduced in any other form - be it partially or in full, without prior written consent of Draka Comteq Finland Ltd. The information presented is believed to be correct at the time of going to print. Draka Comteq Finland Ltd reserves the right to alter technical information without prior notice. This information is not binding except where expressly declared by Draka Comteq Finland Ltd.
Quality management system
Draka Comteq Finland’s quality management system has been approved by an authorized certification company according to ISO 9001 standard. Operating according to the standard guarantees the quality and continuous improvement of our products and processes.
Environmental system
Draka Comteq Finland’s environmental management system has been created to offer our customers products of better quality with less environmental impacts. The environmental system is followed through, controlled and developed in all our operations and it has been approved by an authorized certification company according to ISO14001 environmental standard.
4 5Fibre optic cable accessories 54 Fibre optic cable accessories
Contact information
Draka Comteq Finland Ltd.P.O.Box 419FI-00101 Helsinki, FinlandTel. +358 10 5661Fax +358 10 566 3394E-mail: [email protected] Marketing and SalesMartti PuoskariDirector Sales and MarketingManaging Director Tel. +358 10 566 3600 +358 40 758 7199 Fax +358 9 870 2042 SalesSirkku LaineSales ManagerTel. +358 10 566 3722 +358 40 748 3447Fax +358 10 566 3668 Customer CareSirpa IltanenSales AssistantTel. +358 10 566 3603 +358 40 588 6937Fax +358 9 870 2238 Technical SupportPetri UtulahtiProduct Manager, CablesTel. +358 10 566 3439 +358 40 709 039Fax +358 9 870 2238 Hannu VäätämöinenProduct Group ManagerFTTH Cabling SolutionsTel. +358 10 566 3298 +358 40 587 6757Fax +358 10 566 3668
6 7Fibre optic cable accessories6 7
Generic cabling
Draka Linkki is Draka’s premises cabling solution for a highly reliable open cabling system.
Draka’s wide cable range covers products suitable for premises communication networks. As the generic cabling application standards have been revised, these cables and other related compo-nents have been integrated into the concept of Draka Linkki.
Draka Linkki is an open cabling system that complies with the European standard on generic cabling. The cabling system is suitable for telephone networks including broadband access interfaces, local area networks and control and building automation applications. In terms of copper cables, we offer the UC (Universal Cable) series comprising generic cables in categories 5, 6 and 7, and a Supercat cable for outdoor applications.
For longer distances and connections between buildings, especially when fast connections are needed, we recommend the use of fibre optic cables. The multimode fibre cable categories listed in the cabling standards are OM1, OM2 and OM3. The corresponding categories for single-mode fibre cables are OS1 and OS2. We offer products in all these fibre classes.
You can choose from our wide product range: the FZOMSU-SD, a generic premises cable suitable for indoor/outdoor use, and the FTMS for hori-zontal cabling. These cables can be supplied with different category fibres. Backbone cables can be terminated in an ORP 260 cross-connection distribution panel in building and floor distributors.
Fibre optic cable accessories
8 9Fibre optic cable accessories
Fibre optic cable accessories
Joint closures pageUniversal joint closure XOK 10... 10Accessories for joint closure XOK 10... 14Joint closure XOK 112 16Indoor joint box PK-210 17
Termination boxes and distribution panels ORP-101 19ORP-200 20ORP-250 21 ORP-260 21ORP-250 and ORP-260 KIT 22ORP-300 24ORP-220 25PK-50 26PK-55 27PK-100A 28PK-200 29PK-300 30PK-107 31
Accessories for PK- and ORP-boxes Entrance accessories 32Splice trays 34Mounting plate 35Connector adaptors 36
Cross-connection systems ORP-6000 38
Connectorized cable assembliesPigtails 40Pigtail sets 42Patch cords 44Connectorized indoor and outdoor cables 46
Fibre optic tools and accessories 48
Content:
8
10 11Fibre optic cable accessories
Joint closures
Type Universal joint closure XOK 10...
Application The universal joint closure XOK 10... is designed to provide pressure-tight environmental protection for optical fibres and optical fibre splices regardless of the cable design. Application range from aerial to buried installations.
As the closure is made of acid-proof stainless steel and it is watertight, it can be installed in harsh and corrosive environments without any additional protection. The closure is sealed with reopenable chloroprene rubber gasket.
The closure has anchoring points for strength members and facilities for the earthing of metallic elements. The splice organizer trays offer holders for splices and sufficient room for spare fibres. The closure is easily assembled and re-entered.
The closure is available in four basic versions with two, three or four cable entrances. Special branch joint closures and extension collars for more cable outlets are also available.
Basic assemblies of the XOK10... joint closures
The closure kit contains all the hardware needed for the assembly and mounting of unarmoured cables, including heat-shrinkable tubes, earthing wires etc. The kits for closures with 3 or 4 cables inlets also include plugging material for tubes that may be reserved for future use. Other accessories must be ordered separately.
Join
t clo
sure
s
Closure types
XOK 103 series
XOK 1030
XOK 10304/XOK 10704
XOK 10305/XOK 10705
XOK 10307/XOK 10707
Dimensions (excl. Inlet tubes): 560x230x100 mmInner diameter of cable inlets: 20 mmCapacity: 4 splice trays XOKP 1024 or XOKP 1024/48
Branching closure XOK 10307A
Contains two inlets of inner dia. 20 mm and one elliptical inlet of inner size 28x58 mm on one side.
XOK 107 seriesXOK 10704XOK 10705XOK 10707
Dimensions (excl. Inlet tubes): 560x230x140 mmInner diameter of cable inlets: 27 mmCapacity: 8 splice trays XOKP 1024 or XOKP 1024/48
12 13Fibre optic cable accessories
Joint closures
Join
t clo
sure
s
Special versions
SSTL code Type Draka code
7260568 XOK 1030-24P 10050447260569 XOK 1030-48P 10050457260570 XOK 1030-96P 10050477276102 XOK 10304-24P 10050487276103 XOK 10304-48P 10050497276104 XOK 10304-96P 10050507276105 XOK 10305-24P 10050517276106 XOK 10305-48P 10050527276107 XOK 10305-96P 10050547260571 XOK 10307-24P 10050557260572 XOK 10307-48P 10050567260573 XOK 10307-96P 10050577260574 XOK 10307A-24P 10050587260575 XOK 10307A-48P 10050597260576 XOK 10307A-96P 1005060
NXOK 1030-24 1005136NXOK 1030-48 1005137NXOK 1030-72 1005138NXOK 1030-96 1005139NXOK 10304-24 1005140NXOK 10304-48 1005141NXOK 10304-72 1005142NXOK 10304-96 1005143NXOK 10305-24 1005144NXOK 10305-48 1005145NXOK 10305-72 1005146NXOK 10305-96 1005147
VXOK 1030-24 1005148VXOK 1030-48 1005149VXOK 1030-72 1005150VXOK 1030-96 1005151VXOK 10304-24 1005152VXOK 10304-48 1005153VXOK 10304-72 1005154VXOK 10304-96 1005155VXOK 10305-24 1005156VXOK 10305-48 1005157VXOK 10305-72 1005158VXOK 10305-96 1005159
Extension collars XOK 10305X and XOK 10307X
Extension collars that can be used in first installations or afterwards to increase the number of cable inlets. Contain three cable inlets of inner dia. 20 mm on one end (XOK 10305X) or on one side (XOK 10307X).
Mirror bottom XOK 10307EMirror bottoms can be used in first installations or afterwards to increase the number of cable inlets. Contains three cable inlets of inner dia. 20 mm on one side.
Complete joint closure kits XOK ...P seriesThese kits are including all needed installation material for different fibre counts.
Special complete joint closure kits NXOK ... and VXOK... seriesThese kits are specially made for use in OPGW installations including all needed installation material for different fibre counts. VXOK... for Spiral Space OPGW cablesNXOK... for Steel Tube OPGW cables
SSTL code Type Draka code
7260474 XOK 1030 10050357260476 XOK 10304 10050367260478 XOK 10305 10050377260480 XOK 10307 10050387260567 XOK 10307A 10050397260484 XOK 10704 10050407260486 XOK 10705 10050417276100 XOK 10707 10050427276101 XOK 10707A 10050437260481 XOK 10307X 10050627260479 XOK 10305X 10050617260850 XOK 10307E 1005063
14 15Fibre optic cable accessories
Joint closures
Supplementary kits for Spiral Space® cables
Type Spiral Space® kit SPA-U Can be used with all the fibre quantities, 12–96
pcs, in Spiral Space® cables. Kit consists branching units and separate
protection tubes, length 1.2 m, and a pulling wire. Kit contains materials for 10 cable ends.
Type OPGW supplementary kit VSPA-U Supplementary kit for the joints of OPGWs (Optical
Ground Wire) with Spiral Space® core. Kit contains materials for two OPGWs.
Join
t clo
sure
s
Accessories for joint closures
Type Splice tray XOKP 1024
Features Capacity for 24 single fibre splices or for 12 splices of 4 fibre ribbons
Dimensions 385 x 157 mm
Material plate: powder-painted steel plate splice holder: PE cover: plexiglass
Type Splice tray XOKP 1024/48
Features Capacity for 48 single fibre splices
Dimensions 385 x 157 mm
Material Powder-painted steel plate. Plexiglass cover. Silicone spice holders.
Type Rubber gasket XOKE 1002 Used when the original gasket has to be
changed.
Type Pole mount for OPGW joint VXOKO 1133 Used for mounting the closure to a pole in a
power line. Contains a pole mount and the mounting accessories.
Type Supplementary kit for armoured cables XOKE 1032
Contains material for mounting and protecting two cable ends.
Kit contains 10 steel ties and 2 heat-shrinkable tubes.
Type Supplementary kit for OPGWs (Optical Ground Wires) VXOKE
Contains materials for mounting and protecting two OPGW ends.
Kit contains 10 steel ties, 2 smaller and 2 bigger heat-shrinkable tubes.
SSTL code Type Draka code
7260491 XOKP-1024/48 10050767276228 XOKP-1024 10062747276108 XOKE 1002 1005069
VXOKO 1133 1005072XOKE 1032 1005073VXOKE 1032 1005074
7260604 SPA-U 1005077VSPA-U 1005081
16 17Fibre optic cable accessories
SSTL code Type Draka code
7260482 XOK 112 10050657276111 PK-210 1005068
Joint closures
Type Indoor joint box PK-210
Features The PK-210 joint box is designed for the termination, branching and distribution of fibre optical cables under dry indoor conditions. It is suitable for wall-mounted installations with small or intermediate numbers of fibres.
3 cable inlets max. cable diameter 20 mm. Two cable inlets can be connected to one wide inlet that gives the possibility to bring in and take out the cable from the box without cutting all the fibres. 6 cable outlets max cable diameter 14 mm. Space for 4 XOKP 1024/48 splice trays (192 fusion splices). Entrance for 24 SC connector adaptors.
Basic assembly Frame and cover. Mounting and grounding bar. KT-1016 entrance and grounding materials for one outdoor cable. KT-1014 entrance materials for one indoor cable. XOKP 1024/48 splice tray for 48 fusion splices.
Dimensions width 210 mm height 500 mm depth 120 mm
Material Powder-painted steel plate.
Join
t clo
sure
s
Type Joint closure XOK 112
Features Can be installed directly in the ground, in a manhole or in the pole. Easy to install. Capacity for up to 12 fibres. Inner dia. of cable inlets 19 mm. Closure and cable inlets protected with sealing material. No need for separate protection tubes for fibres inside the closure when splicing Spiral Space® -type fibre optic cables
Basic assembly Plastic closure with a splice tray for up to 12 splices Grounding materials Sealing materials for the closure and
cable inlets
Dimensions 480 mm x Ø 90 mm
Material Black PE
18 19Fibre optic cable accessories
SSTL code Type Draka code
7260660 ORP-101/SC 10050837260663 ORP-101/SC-D 10050847260662 ORP-101/ST/FC*D 10050857260670 ORP-1100 1005097
Termination boxes and distribution panels
Type Distribution panel ORP-101
Application Universal distribution panel for 19” racks and for wall installation.
Features Contains a splice tray, patch panel and cover. Entrance space for 3 cables from the back of the panel. When terminating Spiral Space® type fibre optic cables the cable core can be fastened directly to the splice tray without using separate protection tubes. Capacity with SC-D adaptors for 48 fibres and with other adaptor types for 24 fibres. Patch panel selectable for SC, SC-D (SC duplex) or ST/FC*D connector adaptors.
Basic assembly ORP-101 frame. Grounding and mounting plate for 3 cables. Splice tray for 48 fusion splices.
Patch panel for 24 SC, SC-D, ST or FC*D connector adaptors.
Dimensions width 440 mm (19”) height 90 mm (2U) (with storage shelf 134 mm (3U)) depth 280 mm (with storage shelf 370 mm)
Material Powder-painted steel plate.
Accessories Storage shelf ORP-1100 for excess lengths of patch cords.
Term
inat
ion
boxe
s an
d di
strib
utio
n pa
nels
Indoor termination boxes
ORP distribution panels are designed for the termination and distribution of fibre optic cables in telecommunica-tions, CATV and LAN networks. In a fibre optic network these panels work as a cross-connection and testing point between the optical cable network and the equipment.ORP distribution panels can be used with various kinds of cable construction. The constructions of the panels are simple and modular and thus they are easy to install, maintain and upgrade.
PK series termination boxes are designed for the termination, branching and distribution of fibre optic cables in telecommunications, CATV and LAN networks under dry indoor conditions. They are suitable for wall-mounted installations with small or intermediate numbers of fibres. The construction of the boxes is clear and simple and independent of the cable construction, so that they are easy to install, maintain and upgrade.
20 21Fibre optic cable accessories
SSTL code Type Draka code
7260530 ORP-200 SC 10050867260532 ORP-250 SC 10050887260664 ORP-250 SC-D 10050897260534 ORP-250 ST/FC*D 10050907260536 ORP-260 SC 10050917260665 ORP-260 SC-D 10050927260538 ORP-260 ST/FC*D 10050937260554 ORP-2100 10051007276114 ORP-2200 1005101
Termination boxes and distribution panels
Type Distribution panels ORP-250 and ORP-260
Application Universal distribution panel for 19” racks and for wall installation.
Features Contains a splicing section, patch panel and cover. ORP-250 contains also a storage shelf for excess lengths of patch cords. Position of the mounting and storage shelf can be adjusted freely according to the installation. Entrance for 2 cables from the back of the panel. Capacity for 48 fusion splices. Patch panel available for 24 SC, SC-D, ST or FC*D connector adaptors.
Dimensions width 440 mm (19”) height 60 mm 45 mm (without storage shelf) depth 203 mm (without storage shelf)
Material Frame: galvanized steel plate Other parts: powder-painted steel plate.
Type Distribution panel ORP-200
Application Universal distribution panel for 19” racks and for wall installation.
Features Contains a splicing section patch panel and as optional a storage shelf for excess lengths of patch cords, ORP-2100. Position of the mounting brackets and storage shelf can be adjusted freely according to the installation. Entrance space for 3 cables from the back of the panel. When terminating Spiral Space® type fibre optic cables the cable core can be fastened directly to the splice tray without using separate protection tubes. Capacity for 24 SC adaptors.
Basic assembly ORP-200 frame. Grounding and mounting plate for 3 cables.
Splice tray for 24 fusion splices. Patch panel for 24 SC adaptors.
Dimensions width 440 mm (19”) height 45 mm (1U) depth 270 mm
Material Powder-painted steel plate.
Accessoriers Storage shelf ORP-2100 Guiding panel ORP-2200
Term
inat
ion
boxe
s an
d di
strib
utio
n pa
nels
Indoor distribution panels
22 23Fibre optic cable accessories
SSTL code Type
7276129 ORP-250KIT/SC PRIMASET-6x10/125-SC/- 7276130 ORP-250KIT/SC PRIMASET-12x10/125-SC/- 7276131 ORP-250KIT/SC PRIMASET-24x10/125-SC/- 7276132 ORP-250KIT/SC-D 2xPRIMASET-24x10/125-SC/-
7276222 ORP-260KIT/SC PRIMASET-6x10/125-SC/- 7276223 ORP-260KIT/SC PRIMASET-12x10/125-SC/- 7276224 ORP-260KIT/SC PRIMASET-24x10/125-SC/- 7276225 ORP-260KIT/SC-D 2xPRIMASET-24x10/125-SC/-
7276133 ORP-4110KIT/SC PRIMASET-6x10/125-SC/-7276134 ORP-4110KIT/SC PRIMASET-12x10/125-SC/-7276135 ORP-4110KIT/SC PRIMASET-24x10/125-SC/-7276136 ORP-4110KIT/SC-D 2x PRIMASET-24x10/125-SC/-
Type Pre-connected terminations
Application Terminations and patch panels can be delivered as pre-mounted packages with connector adaptors, (SC) and PRIMASET -pigtail set (SC) pre-connected to adaptors in ORP-250, ORP-260 and ORP-4110 terminations.
Features The terminations can be equipped with 6, 12, 24 or 48 fibres.
Termination boxes and distribution panels
Indoor distribution panels and accessories Complete packages of termination boxes and distribution panelsThese kits includes all needed installation material for different fibre quantities and different connectors.
• box or panel• splice trays (if needed)• pigtails• connector adaptors• fibre splice protection sleeves• mounting and grounding material
SSTL code Type Draka code
PK-100A/12SC
PK-200/A12FC 1005171PK-200/A24FC 1005172PK-200/A12SC 1005173PK-200/A24SC 1005174
PK-300/A24FC 1005175PK-300/A36FC 1005176PK-300/A48FC 1005177PK-300/A24SC 1005178PK-300/A36SC 1005179PK-300/A48SC 1005180
ORP-101/A12FC 1005160ORP-101/A24FC 1005161ORP-101/A12SC 1005162ORP-101/A24SC 1005163ORP-101/A48SC 1005164
ORP-250/24SCORP-250/48SCORP-250/24FC
Term
inat
ion
boxe
s an
d di
strib
utio
n pa
nels
24 25Fibre optic cable accessories
Type Distribution panel ORP-300
Features Contains an inner module with a splice tray, patch panel and a space for storing excess lengths of patch cords.
Capacity for 24 fibres The terminated cable is mounted and
possibly earthed outside the panel, e.g. to an ORP-1200 mounting and earthing plate, and only the fibres in their protection tubes are taken into the panel. If the cable has more than 24 fibres they can be divided among several panels.
Patch panel is selectable for FC, SC or ST connectors.
Inner module is hinged to facilitate the istallation, maintenance and expansion.
The panel is designed mainly for 19” racks, but can also with accessories be mounted to other type of racks or to the wall.
Basic assembly ORP-300 frame, hinged inner module and hinged cover on the front for protecting the connectors.
ORP-1008 entrance and earthing materials for one outdoor cable, 1 pc.
Splice tray fro 24 fusion splices. Patch panel for 24 FC, SC or ST connectors.
Dimensions width 440 mm (19”) height 89 mm (2U)
depth 230 mm Material Powder-painted steel plate
Termination boxes and distribution panels
Indoor distribution panels
Type Splice module ORP-220
Application Universal spllice module for 19” racks.
Features Contains space for 6KT 1424/48 splice trays. Capacity for 288 fibre splices.
Basic assembly ORP-220 module and KT 1424/48 splice tray.
Dimensions width 440 mm (19”) height 88 mm depth 200 mm Material Powder-painted steel plate
SSTL code Type Draka code
ORP-300 SC 1005094ORP-300 SC-D 1005095ORP-300 ST/FC*D 1005096
SSTL code Type Draka code
7276090 ORP-220 1005098
Term
inat
ion
boxe
s an
d di
strib
utio
n pa
nels
26 27Fibre optic cable accessories
Type Indoor termination box PK-55
Features PK-55 is suitable for wall-mounted installations with small or intermediate numbers of fibres. The construction of the box is clear and simple and independent of the cable construction, so that it is easy to install, maintain and upgrade.
Includes a grounding bar, a splice holder and cable entrance materials.
2 cable inlet, dia. max. 13 mm. Space for 12 splices.
Entrance for 6 SC adapters. No need for separate protection tubes
when terminating Spiral Space® type fibre optic cables.
Dimensions width 140 mm height 40 mm depth 155 mm
Material Powder-painted steel plate.
Type Indoor termination box PK-50
Features PK-50 is suitable for wall-mounted installations with small or intermediate numbers of fibres. The construction of the box is clear and simple and independent of the cable construction, so that it is easy to install, maintain and upgrade.
Includes a grounding bar, a splice holder and cable entrance materials.
1 cable inlet, dia. max. 16 mm. Space for 8 splices.
Entrance for 4 SC-D adapters. No need for separate protection
tubes when terminating Spiral Space® type fibre optic cables.
Dimensions width 140 mm height 50 mm depth 155 mm Material Powder-painted steel plate.
Indoor termination boxes
SSTL code Type Draka code
7260564 PK-50 SC-D 1005102
SSTL code Type Draka code
7260503 PK-55 SC 1005103
Term
inat
ion
boxe
s an
d di
strib
utio
n pa
nels
Termination boxes and distribution panels
28 29Fibre optic cable accessories
Type Termination box PK-100A
Features Termination box for wall installation includes a grounding bar, 2 splice holders, KT-1020 entrance materials for one outdoor cable and protection plate with marking tape for patch cords.
2 cable inlets. Cable inlets can be connected to one wide inlet that gives the possibility to bring in and take out the cable from the box without cutting all the fibres. Capacity for 24 splices. 12 entrances for SC, ST or FC*D connector adaptors.
No need for separate protection tubes when terminating Spiral Space® type fibre optic cables.
Dimensions width 356 mm height 160 mm depth 50 mm
Material Powder-painted steel plate.
Type Termination box PK-200
Features 3 cable inlets. Two cable inlets can be connected to one wide inlet that gives the possibility to bring in and take out the cable from the box without cutting all the fibres. Space for 4 KT-1412/24 splice trays.
Entrance for 24 SC, ST or FC*D connector adaptors.
Basic assembly Frame and cover. Mounting and grounding bar.
KT-1016 entrance and grounding materials for one outdoor cable, 1 pc.
KT-1412/24 splice tray for 24 fusion splices, 1 pc.
Dimensions width 210 mm height 400 mm depth 120 mm
Material Powder-painted steel plate.
Indoor termination boxes
SSTL code Type Draka code
7260522 PK-100A SC 1005105
SSTL code Type Draka code
7260510 PK-200 SC 10051087260514 PK-200 ST/FC*D 1005109
Term
inat
ion
boxe
s an
d di
strib
utio
n pa
nels
Termination boxes and distribution panels
30 31Fibre optic cable accessories
Type Termination cabinet PK-300
Features The PK-300 termination cabinet is designed for the termination and distribution of various types of fibre optic cables to a wall-mountable and dust-proof termination.
Patch panel divides the box into splicing and cross-connection sections. Splicing section protected with a separate door.
Cross-connection section has cable entrances to both, up and down, directions. Includes a grounding bar, KT-1412/24 splice tray, KT-1016 entrance material for one outdoor cable and 2 stress relief bars for 24 pcs. of 2 mm FMS patch cords.
6 cable inlets, of which 3 are on the top and 3 on the bottom. Two cable inlets on the top and on the bottom can be connected to one wide inlet that gives the possibility to bring in and take out the cable from the box without cutting all the fibres.
Space for 5 KT-1412/24 splice trays. Patch panel selectable for SC, ST or FC*D connector adaptors, with capacity for 48 adaptors.
Dimensions width 480 mm height 400 mm depth 155 mm
Material Powder-painted steel plate.
Type Outdoor termination box PK-107 Features Joint and termination box for outdoor
use for fibre optic cables. Can be installed inside poles, cabinets or on the wall. Includes possibility for grounding the cables, wall mounting bracket and inlet material for two outdoor cables, max. Ø 16 mm and for one max. Ø 11 mm.
Fixing plate for two SC-D adaptors and splice holder for 12 fibre splices.
Capacity: 12 fibre splices and four SC-connectors.
The box can easily be opened and closed.
Dimensions width 88 mm height 336 mm width 40 mm
Material Powder-painted steel plate.
Indoor termination boxes
SSTL code Type Draka code
7260516 PK-300 SC 10051107260520 PK-300 ST/FC*D 1005111
Outdoor termination boxes
SSTL code Type Draka code
7276052 PK-107 1005067
Term
inat
ion
boxe
s an
d di
strib
utio
n pa
nels
Termination boxes and distribution panels
32 33Fibre optic cable accessories
SSTL code Type Draka code
7260546 KT-1010 10051147260548 KT-1016 10051167276138 KT-1020 10051177276139 KT-1060 10051187260556 ORP-1008 10051197260552 ORP-1023 1005120
Entrance materials for ORP boxes
Type OPR-1008
Entrance and grounding materials for Spiral Space® type cables.
Type OPR-1023
Entrance and grounding materials for a stranded loose-tube cable.
Entrance materials for PK termination boxes
Type KT 1010
Entrance materilas for pigtails in PK-100A, PK-200 and PK-300 boxes, 6 pcs / pack.
Type KT-1016
Entrance and grounding material for one outdoor cable of outer dia. max. 20 mm in PK termination boxes.
Type KT-1020
Entrance and grounding material for one loose-tube type cable in PK termination boxes.
Type KT-1060
Entrance and grounding material for one outdoor cable of outer dia. max. 20 mm in ORP-6000 outdoor cabinet.
Acce
ssor
ies
for P
K- a
nd O
RP-b
oxes
ORP-1008
ORP-1023
KT-1016
Termination boxes and distribution panels
Accessories for PK and ORP boxes
34 35Fibre optic cable accessories
Type KT-1424/48
Application Splice tray for 48 fusion splices. Can be used in ORP-220, ORP-4120 and ORP-6000.
Dimensions 158 mm x 350 mm x 10 mm
Material Powder-painted steel plate, silicone splice holders.
Type KT-1412/24
Application Splice tray for 24 fusion splices. Can be used in PK-200 and PK-300 boxes.
Dimensions 158 mm x 270 mm x 7.5 mm
Material Powder-painted steel plate, silicone splice holders.
Type ORP-1200
Application Mounting and grounding plate for 6 outdoor cables. Can be mounted to a 19” rack or to a wall.
Mounting plate for ORP boxes Splice trays for PK and ORP boxes
Acce
ssor
ies
for P
K- a
nd O
RP-b
oxes
Termination boxes and distribution panels
Accessories
SSTL code Type Draka code
7260652 KT-1412/24 10051217260654 KT-1424/48 1005122
SSTL code Type Draka code
7260542 ORP-1200 1005112
36 37Fibre optic cable accessories
Type Connector adaptors
FT 503 FC adaptor for SM/MM fibres with D-hole mounting (FC*D), bronze sleeve
FT 505 FC/APC adaptor with D-hole mounting, zirconia sleeve
FT 515 ST adaptor for MM fibres, metal sleeve
FT 516 ST adaptor for SM/MM fibres, zirconia sleeve
FT 530 SC adaptor for SM/MM fibres, colour blue, bronze sleeve
FT 531 SC adaptor for SM/MM fibres, colour blue, zirconia sleeve
FT 532 SC duplex adaptor (SC-D) for SM/MM fibres, colour blue, bronze sleeve
FT 533 SC duplex adaptor (SC-D) for SM/MM fibres, colour blue, zirconia sleeve
FT 534 SC/APC adaptor, colour green, zirconia sleeve
FT 538 SC/APC duplex adaptor for SM/MM fibres, colour green, zirconia sleeve.
FT 540 SC adaptor for MM fibres, colour beige, bronze sleeve
FT 542 SC duplex adaptor (SC-D) for MM fibres, colour beige, bronze sleeve
FT 551 LC duplex adaptor for SM fibres, colour blue, zirconia sleeve. Can be installed in SC opening.
FC*D SC SC duplex (SC-D)
ST LC duplex(LC-D)
Connector adaptors FT 5...PK and ORP boxes are available with various connector adaptors that can either be pre-mounted or ordered separately.
Acce
ssor
ies
for P
K- a
nd O
RP-b
oxes
Termination boxes and distribution panels
Accessories
SSTL code Type Draka code
7260608 FT-503 10051237276140 FT-505 10051247260612 FT-515 10051257276141 FT-516 10051267260614 FT-530 10051277260616 FT-531 10051287260618 FT-532 10051297260624 FT-533 10051307260751 FT-534 10051317260752 FT-538 10051327260620 FT-540 10051337260622 FT-542 10051347260625 FT-551 1005135
38 39Fibre optic cable accessories
Cross-connection systems
Cros
s-co
nnec
tion
syst
ems
Cross-Connection cabinet ORP-6000
ORP-6000 cross-connection cabinet is designed for outdoor use installed into a standard telephone streetcabinet. Inside the street cabinet as a double-wall construction it provides environmental and mechanical protection for optical fibre splices and connectors.
Features In outdoor use OP-6000 cabinet is installed inside of a standard telephone cabinet. Dustproof construction. Passive cooling system provided by the air ventilator on the bottom of cabinet.
Entrance for 12 cables. Holder for 10 KT-1424/48 splice trays. Accommodates up to 5 ORP-4110 patch panels, each for max 24 SC-D or FC*D connector adaptors. The front panel can be drawn out and locked to a downward position for termination and for cleaning the conncetors inside of the panel.
FIBSET of PRIMASET pigtail sets are used between the splice trays and patch panels.
Capacity 480 fibre splices 120 connectors with SC or FC*D
adaptors 240 connectors with SC-D (Scduplex)
adaptors
Dimensions width 744 mm height 535 mm depth 295 mm weight 22 kg (basic assembly)
Material Cabinet glassfibre reinforced plastic Inside parts galvanized steel plate Splice trays painted steel plate Patch panels painted aluminium and
galvanized steel plate
Basic assembly ORP-600 cabinet with lockable door Splice tray KT-1424/48, 2 pcs Holder for five ORP-4110 patch panels Protection plate for patch cords Grounding and mounting bar KT-1060
entrance and grounding materials for one cable, 2 pcs
Bars for mounting ORP-6000 cabinet to an outer telephone cabinet
Type Patch panel ORP-4110
Features Contains a front panel and frame. The front panel can be drawn out and locked to a downward position for termination and for cleaning the connectors inside the panel. Entrance for fibres from both sides of panel. Bending guides that allow a controlled bending of fibres. Selectable for SC, SC-D and FC connector adaptors.
Capacity 24 fibres with SC or FC connector adaptors
48 fibres with SC-D (SC dublex) connector adaptors
Dimensions width 490 mm height 60 mm depth 255 mm
Material Powder-painted steel plate
Basic assembly ORP-4110 frame and front panel Front panel for 24 SC, SC-d or FC
adaptors Mounting accessories Fastening accessories for the cable or
for pigtail sets
Can be delivered as pre-mounted version (ORP-KIT) with connector adaptors and FIBSET or PRIMASET type pigtail sets connected to adaptors.
SSTL code Type Draka code
7276112 ORP-6000 10050827276121 ORP-4110 SC 10051827276122 ORP-4110 SC-D 10051837276123 ORP-4110 ST/FC*D 1005184
40 41Fibre optic cable accessories
Connectorized cable assemblies
Type Pigtail FIB-YY-2-XX/-
Application Pigtails and pigtail sets are used for termi-nating fibre optic cables by splicing them to the fibres of the cable and connecting the other end, supplied with a connector, to a patch panel or directly to line terminal.
Features Tight secondary coated fibre, outer dia. 0.9 mm.
Standard length 2 m
XX= Connector type SC, FC, ST, LC and MU. YY= Fibre type (µm) 10/125 BBxs (OS2) yellow 62.5/125 (OM1) white 50/125 (OM3) green Standard packaging for SM – 6 pcs Standard packaging for MM – 4 pcs
Conn
ecto
rized
cab
le a
ssem
blie
s
Pigtails and pigtail sets
SSTL code Type Draka code
7260468 FIB-10/125-2-SC/- 10048887260460 FIB-10/125-2-FC/- 10048897260471 FIB-10/125-2-LC/- 10048917260470 FIB-62,5/125-2-SC/- 10048957260462 FIB-62,5/125-2-FC/- 10048977260464 FIB-62,5/125-2-ST/- 10048987260466 FIB-50/125-2-SC/- (OM3) 1004901
Type Pigtail FMS-YY-3-XX/-
Features Cord-type fibre optic cable, outer dia. 2 mm. Standard lenght 3 m. Other lenghts can be
supplied on request.
XX = Connector type SC, FC, ST, LC and MU. YY = Fibre type (µm) 10/125 BBxs (OS2) yellow 62.5/125 (OM1) orange 50/125 (OM3) green
The connectors fulfil IEC-874 requirements.
Single-mode Insertion loss Typical < 0.1 dB Max. 0.4 dB
Reflection loss UPC > 50 dB APC > 60 dBMultimode Insertion loss Typical 0.1 dB Max. 0.5 dB
SSTL code Type Draka code
7260439 FMS-10/125-3-SC/- 10049027260450 FMS-10/125-3-FC/- 10049037260448 FMS-62,5/125-3-SC/- 10049047260452 FMS-62,5/125-3-FC/- 10049057260454 FMS-62.5/125-3-ST/- 1004906
42 43Fibre optic cable accessories
Type Pigtail set COLOURPACK FIB-10/125-2-SC/- Features Contains 6 pcs. of BBxs single-mode
fibre pigtails, outer dia. 0.9 mm, with termination in one end. Colour code is according to SFS-standard: blue/white/yellow/green/grey/red.
Standard length 2 m.
Type Pigtail set FIBSET-6x10/125-XX/-
Features Contains 6 pcs of BBxs single-mode fibre pigtails, outer dia. 0.9 mm, that are protected with a common protection tube.
The standard length of fibres 3.5 m and the length of the loose protection tube 2.0 m.
Colour code is according to SFS-standard: blue/white/yellow/green/ grey/red.
XX = Connector type FC or SC
Type Pigtail set PRIMASET-Nx10/125-XX/-
Features Contains N pcs. of primary coated BBxs single-mode fibres, outer dia. 0.25 mm, that are terminated with connectors at one end and that are protected with a common protection tube.
Standard length of fibres 5 m, standard length of protection tube 4.5 m.
Between the common protection tube and the connectors each fibre is protected with the own protection tube, outer dia. 0.9 mm, standard length 0.5 m.
The colours of the fibres and the protection tubes are according to SFS-standard:
blue/white/yellow/green/grey/red.
N = number of fibres 6, 12 or 24 XX = Connector type FC or SC
Connectorized cable assemblies
Pigtails sets
Conn
ecto
rized
cab
le a
ssem
blie
s
SSTL code Type Draka code
7260560COLOURPACK FIB 10/125-2-SC/-
1004908
7260579 FIBSET-6x10/125-SC/- 1004907
SSTL code Type Draka code
7276147 PRIMASET-6x10/125-SC/- 10049117276148 PRIMASET-12x10/125-SC/- 10049127276149 PRIMASET-24x10/125-SC/- 1004913
44 45Fibre optic cable accessories
Description Connectorized cable assemblies are cord-type fibre optic cables terminated with connectors. The type of cable, fibre and connector and length of the cable can be freely specified.
The connectors fulfil IEC-874 requirements.
Cable types
FMS FLMS FLMMS FTMS
SSTL code Type Draka code
7260440 FMS-10/125-2-SC/SC 10049147260438 FMS-10/125-2-FC/FC 10049157260710 FMS-10/125-2-LC/LC 10128337260442 FMS-10/125-2-FC/SC 10049177260444 FMS-10/125-3-SC/SC 10049217260445 FMS-10/125-5-SC/SC 1004926
7260402 FLMS-2x10/125-2-SC/SC 10049377276022 FLMS-2x10/125-2-LC/LC 10049407260404 FLMS-2x10/125-2-LC/SC 1004941
7260430 FMS-62.5/125-2-SC/SC 10049697260426 FMS-62.5/125-2-FC/FC 10049707260434 FMS-62.5/125-2-ST/ST 10049717260436 FMS-62.5/125-2-FC/SC 10049727260432 FMS-62.5/125-2-SC/ST 10049747260428 FMS-62.5/125-2-FC/ST 1004973
7260406 FLMS-2x62.5/125-2-SC/SC 10049847260410 FLMS-2x62.5/125-2-ST/ST 10049867260589 FLMS-2x62.5/125-2-LC/LC 10049907260371 FLMS-2x62.5/125-2-LC/SC 1004989
Other types on request.
Conn
ecto
rized
cab
le a
ssem
blie
s
Connectorized cable assemblies
Patch cords
FC
FC/APC
SC
SC/APC
MU (Mini-SC)
ST
LC
Connector types
Cable typesFMS: Tight buffered single fibre cable, Ø 2mm. Halogen free, flame retardant.FLMS: Figure-8 zip cord cable with two FMS cables. Dimensions: 2x4mm. Halogen free, flame retardant.FLMMS: FLMS cable with common outer sheath. Dimensions: 3x5mm. Halogen free, flame retardant.FTMS: Tight buffered distributiuon cable (4–24 fibres). Halogen free, flame retardant.
Optical fibre types10/125µm BBxs (SMT) OS2Tight secondary coated single-mode fibre, outer dia. 0.9 mm. Colour yellow.62.5/125µm (GKT) OM1Tight secondary coated GK multi-mode fibre, outer dia. 0.9 mm. Colour orange.50/125µm (GIT) OM3 Tight secondary coated GI mult-imode fibre, outer dia. 0.9 mm. Colour green.
46 47Fibre optic cable accessories
Type FZOMSU-SD KIT FZOMSU-SD TERM FTMS-KIT
Description The FZOMSU-SD indoor/outdoor cable or FTMS indoor cables can be supplied to lengths specified by the customer and terminated with connectors. This enables them to be easily and quickly installed without special equipment or tools.
Features Cable can be terminated at one or both ends with pigtails. Max. number of fibres 48 pcs.
The available connector types SC, FC or ST. Cables are delivered in a coil up 50 m.
The connectorized cable end is protected with a small cardboard protector box for transportation and installation.
Up to 200 m cables are delivered on a disposable cardboard reel, Ø 700 mm x 200 mm. The longer lengths up to 2000 m are delivered on a disposable wooden reel, Ø 1100 mm x 542 mm.
For transportation and installation the connectorized cable ends are protected with a flexible protection tube, which also works as a pulling head.
The connectorized FZOMSU-SD and FTMS cables can also be delivered as pre-terminated to ORP distribution panels. Available up to 48 fibres.
The connectors fullfil IEC-874 requirements.
Single-mode Insertion loss Typical < 0.1 dB Max. 0.4 dB
Reflection loss UPC > 50 dB APC > 60 dB
MultimodeInsertion loss Typical 0.1 dB Max. 0.5 dB
FZOMSU-SD KIT
FZOMSU-SD TERM
FZOMSU-SD TERM
Conn
ecto
rized
cab
le a
ssem
blie
s
Connectorized cable assemblies
Connectorized indoor / outdoor cables
48 49Fibre optic cable accessories
SSTL code Type Draka code
7260492 FT-290 10050217260493 FT-290C 10050227260494 FT-291 10064507260496 FT-293 10050237276203 FT-294C 1005024
SSTL code Type Draka code
7276209 FSM-1000-SC/SC 10050197276210 FSM-500-SC/SC 10050207276211 FMM-100-SC/SC 1005016
Type Fibre protection sleeves
FT 290 Fibre protection sleeve for single fibre fusion splices, length 61 mm, 50 pcs/pack (Sumitomo SPS-61-2.6-N)
FT 290C Fibre protection sleeve for single fibre fusion splices, length 61 mm, 100 pcs/pack (Canusa)
FT 291 Fibre protection sleeve for fusion splices of 4 or 8 fibre ribbons, length 40 mm.
FT 293 Fibre protection sleeve for single fibre fusion splices, length 40 mm, 50 pcs/pack (Sumitomo FPS-40)
FT 294C Fibre protection sleeve for single fibre fusion splices, length 45 mm, 100 pcs/pack (Canusa)
Fibr
e op
tic to
ols
and
acce
ssor
ies
Other types on request.
Launch fibre package
Launch fibres are used in OTDR (Optical Time Domain Reflectomer) measurements for eliminating effect of the dead zone on the test results. For improved handling of the launch fibre in the field, the fibre is packed in a small, rugged aluminium case, in which the connectorized fibre ends are also protected with a hinged cover.
Type Launch fibre package FSM with single-mode fibre FMM with multi-mode fibre
Features Fibre of the single-mode (SM) or multimode (GK) type. Standard length 1000 m of single-mode fibre and 100 m of multimode fibre. No fibre splices.
Standard length of the protected fibre ends 2 m. Connectors type FC, SC, FC/APC or SC/APC.
Dimensions 300 x 200 x 30 mm
Fibre optic tools and accessories
50 02/2009
Kimmeltie 1, FI-02110 ESPOO, FinlandP.O. BOX 419, FI-00101 HELSINKI, Finland
Telephone +358 10 5661, Fax +358 10 566 3394www.draka.fi