Plastic Disc Filter

Size Filtration

Grade

2” 130 Micron

120 Mesh

3” 130 Micron

120 Mesh

Installation:

• Filter can be installed as a single unit or in a filterbank. Standard

manifolds are available to accommodate various multiples.

• Install a valve before the filter to close the water supply for cleaning

purposes. • Ensure that the filter elements are always positioned horizontally when

installed. • Note the direction of flow when installing. The arrow on the filter denotes

flow direction.

Dismantling for Cleaning:

• Ensure that the water pressure is turned off. Never open clamps while

under Pressure. • Unlatch clamps and remove filter cover.

• Loosen the tightening cap and pull out the telescopic spine and hose off

discs. • When re-assembling, ensure the O

Assembly:

• Position filter discs on to disc spine.

• Please ensure that when cap is tightened properly the number of rings

:

Model Max. Pressure Max. Flow

2 TTT

2 VTV 10 Bar 30 m

3 TTT

3 VTV 10 Bar 50 m

Filter can be installed as a single unit or in a filterbank. Standard

manifolds are available to accommodate various multiples. Install a valve before the filter to close the water supply for cleaning

Ensure that the filter elements are always positioned horizontally when

Note the direction of flow when installing. The arrow on the filter denotes

Dismantling for Cleaning:

water pressure is turned off. Never open clamps while

Unlatch clamps and remove filter cover. Loosen the tightening cap and pull out the telescopic spine and hose off

assembling, ensure the O-rings are properly in place.

Position filter discs on to disc spine. Please ensure that when cap is tightened properly the number of rings

Max. Flow

30 m3/hr.

50 m3/hr.

Filter can be installed as a single unit or in a filterbank. Standard

Install a valve before the filter to close the water supply for cleaning

Ensure that the filter elements are always positioned horizontally when

Note the direction of flow when installing. The arrow on the filter denotes

water pressure is turned off. Never open clamps while

Loosen the tightening cap and pull out the telescopic spine and hose off

rings are properly in place.

Please ensure that when cap is tightened properly the number of rings

fitted does not exceed the length of the filter element. • Insert the detachable spine back into its seat. • Turn fixing cap clockwise to complete tightening of the discs. • Clamp should be fitted over the closing edges.

Advantages:

• Excellent Performance • Easy Cleaning • Resistance to U.V. • Easy Installation

Usage:

• Agriculture • Industry

Material:

• Housing : Polyamide • Filtering Element : Polypropylene Disc • Clamp : Stainless steel

Maintenance:

• If head loss remains high after flushing, the rings may be clogged with

lime deposits. • Hydrochloric acid treatments of rings are then recommended.