finishing notes

Finishing materials: characteristics 1

P.U. LACQUER CLEAR

Description: Two-pack components polyurethane clear on polyol resin and polyisocynanate resin.

Use: Clear finish for where and extremely durable finish is required

Features: Tough film Excellent chemical resistance Excellent durability

Appearance: High gloss finishes

Colour: Clear

Technical: Packing: 1 pail – 20 litersMixing ratio= Base : hardener = 2:1 (by volume)Pot life: 4 hrs at 300CSpecific gravity: 0.90 – 1.00Flash point: 40C

Application: Application method: spray, brush can also be used.Thinner: P.U. thinnerThinning ratio: 40 – 50% if necessaryDry film thickness: 30 microns/coatDrying time: Touch dry – 60 minutes at 300C Hard dry – 24 hrs at 300COver coating interval: 45 minutes at 300CSanding time: 45 minutes at 300C

Painting specification

Surface preparation: remove oil, grease and foreign matters before coating. If necessary, prepare by sanding to establish a smooth clean surface.Sealer: 1 – 2 coat of P.U. sealer clearTopcoat: 1 – 2 coat of P.U. lacquer clear

Jasva Enterprise, 2A, Jln Desa Mewah 16, Taman Desa Mewah, 43500 Kajang, Selangor, Malaysia. Tel: 60-7-699-3999; H.P.: 6-012-213-0619 [email protected]

mailto:[email protected]


P.U. SEALER CLEAR

Description: Two-pack polyurethane based on polyol resin and polyisocynanate resin with suitable sanding agent.

Use: Sealer for absorbent wooden materials to provide a smooth even surface upon light sanding.

Features: Excellent sanding properties Good penetration into wooden substrates including cane Transparent finish Good heat resistance Excellent applicability

Colour: Clear

Technical: Packing: 1 pail – 20 litersMixing ratio= Base : hardener = 2:1 (by volume)Pot life: 3 hrs at 300CSpecific gravity: 0.93 – 1.03Flash point: 230C

Application: Application method: spray, brush can also be used.Thinner: P.U. thinnerThinning ratio: 20 - 40% if necessaryDry film thickness: 30 microns/coatDrying time: Touch dry – 10 minutes at 300C Hard dry – 4 hrs at 300COver coating interval: 45 minutes at 300CSanding time: 45 minutes at 300C


Surface preparation: remove oil, grease and foreign matters before coating. If necessary, prepare by sanding to establish a smooth clean surface.Sealer: 1 – 2 coat of P.U. sealer clearTopcoat: 1 – 2 coat of P.U. lacquer clear




N.C. LACQUER CLEAR

Description: Nitrocellulose base clear lacquer

Use: Finishing clear for timber wall paneling, wood, cane and other quality wooden surfaces in factory application.

Features: Tough and flexible film Super high gloss Fast dry Transparent clear appearance

Appearance: High gloss finishes

Colour: Clear

Technical: Packing: 1 pail – 20 litersSpecific gravity: 0.85 – 0.95Flash point: 50C

Application: Application method: spray, brush can also be used.Thinner: TC303 ThinnerThinning ratio: 70 - 100% if necessaryDry film thickness: 20 microns/coatDrying time: Touch dry – 10 minutes at 300C Hard dry – 1 hr at 300COver coating interval: 45 minutes at 300CSanding time: 45 minutes at 300C


Surface preparation: remove oil, grease and foreign matters before coating. If necessary, prepare by sanding to establish a smooth clean surface.Sealer: 1 – 2 coat of N.C. sealer clearTopcoat: 1 – 2 coat of N.C. lacquer clear




N.C. SEALER CLEAR

Description: A high built sanding sealer based on modified Nitrocellulose with special resin

Use: Sealer for timber wall paneling, wood, cane and other quality wooden surfaces in factory application.

Features: Good filling property Fast dry Good dry sanding property High built property

Colour: Clear

Technical: Packing: 1 pail – 20 litersSpecific gravity: 0.90 – 1.00Flash point: 40C

Application: Application method: spray, brush can also be used.Thinner: TC303 ThinnerThinning ratio: 50 - 80% if necessaryDry film thickness: 20 - 25 microns/coatDrying time: Touch dry – 10 minutes at 300C Hard dry – 30 minutes at 300COver coating interval: 45 minutes at 300CSanding time: 45 minutes at 300C


Surface preparation: remove oil, grease and foreign matters before coating. If necessary, prepare by sanding to establish a smooth clean surface.Sealer: 1 – 2 coat of N.C. sealer clearTopcoat: 1 – 2 coat of N.C. lacquer clear




A.C. SEALER CLEAR

Description: Alkyd-melamine based acid curing clear sealer.

Use: Sealer for timber wall paneling, wood, cane and other quality wooden surfaces in factory application.

Features: Quick dry Good sanding property Good heat resistance Excellent resistance to water and household chemicals

Colour: Clear

Technical: Packing: 1 pail – 20 litersMixing ratio: Base: Hardener = 10:1Pot life: 1 day at 300CSpecific gravity: 1.02 – 1.12Flash point: 70C

Application: Application method: spray, brush can also be used.Thinner: TC303 ThinnerThinning ratio: 10 - 30% Dry film thickness: 20 microns/coatDrying time: Touch dry – 8 - 15 minutes at 300C Hard dry – 30 – 60 minutes at 300COver coating interval: 20 minutes at 300C or flash off1 – 2 minutes at 500C 5 – 10 minutes for light sanding


Surface preparation: remove oil, grease and foreign matters before coating. If necessary, prepare by sanding to establish a smooth clean surface.Sealer: 1 coat of A.C. sealer clearTopcoat: 1 – 2 coat of A.C. top clear




A.C. TOP CLEAR

Description: Alkyd-melamine based acid curing clear varnish.

Use: Clear varnish for timber wall paneling, wood, cane and other quality wooden surfaces in factory application.

Features: Quick dry and good stack ability Good heat resistance Excellent mechanical resistance Excellent resistance to water and household chemicals

Colour: Clear

Gloss: Gloss, semi-gloss and matt

Technical: Packing: 1 pail – 20 litersMixing ratio: Base: Hardener = 10:1Pot life: 1 day at 300CSpecific gravity: 0.95 – 1.05Flash point: 290C

Application: Application method: spray, brush can also be used.Thinner: TC303 ThinnerThinning ratio: 20 - 50% if necessaryDry film thickness: 20 – 30 microns/coatDrying time: Touch dry – 8 - 15 minutes at 300C Hard dry – 30 – 60 minutes at 300COver coating interval: 20 minutes at 300C or flash off1 – 2 minutes at 500C 5 – 10 minutes for light sanding


Surface preparation: remove oil, grease and foreign matters before coating. If necessary, prepare by sanding to establish a smooth clean surface.Sealer: 1 coat of A.C. sealer clearTopcoat: 1 – 2 coat of A.C. top clear



finishing notes

Documents