fire-retardant sealing products for cable · pdf filefurukawa techno material co., ltd....
TRANSCRIPT
FURUKAWA TECHNO MATERIAL CO., LTD.
Fire-retardant sealing productsfor cable penetrations
One-hour fire resistance certified by Japan Building Standards Act
Petit-Roku
COLLARRokumaru-BLOCK
BLOCK
Rokumaru-SHEET
SHEETDanseal- KP Putty
PUTTY
FURUKAWA TECHNO MATERIAL CO., LTD. Address: 5-1-8, HIGASHI-YAWATA, HIRATSUKA-CITY, KANAGAWA PREF. 254-0016 JAPANE-mail:[email protected] http://www.furukawa-ftm.com/
Rokumaru-BLOCK
Simply stuffed into the openingNo special tools required. Easy to fit and removefor easy replacement or addition of cables.
FeatureFits various openingsKits for rectangular and round openings availableto fit a wide range of wall and floor openings.
Fits various opening sizes ranging up to 0.6 square meters
For round or rectangular openings in wall or floor
Fire-retardant sealing products for cable penetrationsOne-hour fire resistance certified by Japan Building Standards Act
Simply stuff fireproof blocks into the opening; lift them out to remove.
Cable Pit trench in a substation
Applicablekit
Opening size(m2)
Number of Blocks (Size)(SS) (S) (M) (L) (LL)
TB-003 – 0.03 4 5 4 – –TB-006 0.03 – 0.06 2 5 4 4 –TB-008 0.06 – 0.08 2 5 7 2 2TB-010 0.08 – 0.10 2 5 7 3 3TB-012 0.10 – 0.12 4 6 7 5 3TB-014 0.12 – 0.14 4 8 8 5 4TB-016 0.14 – 0.16 4 8 8 6 5TB-018 0.16 – 0.18 4 10 9 6 6TB-020 0.18 – 0.20 4 10 9 7 7TB-022 0.20 – 0.22 6 13 9 7 8TB-024 0.22 – 0.24 6 15 10 7 9
FURUKAWA TECHNO MATERIAL CO., LTD.
Petit-Roku
A wide range of small opening kitsFits various opening sizes ranging from 20 mm to 100 mm.
FeatureEasy installationFast and easy to fit. Facilitates reconstructionand replacement or addition of cables.
Simply insert the plastic sleeve into the round wall opening
For round openings in wall
Applicablekit
Opening size(mm)
NPR-20 Φ20NPR-40 Φ40NPR-50 Φ50PW-75 Φ75
PW-100 Φ100
PW-100
NPR-20
Metal sleeve type(Opening diameter of 75 and 100 mm)
Simply insert the plastic sleeve with intumescent material into the pening and fill with fireproof sealing putty.
Address: 5-1-8, HIGASHI-YAWATA, HIRATSUKA-CITY, KANAGAWA PREF. 254-0016 JAPANE-mail:[email protected] http://www.furukawa-ftm.com/
Fire-retardant sealing products for cable penetrationsOne-hour fire resistance certified by Japan Building Standards Act
FURUKAWA TECHNO MATERIAL CO., LTD.
Rokumaru-SHEET
Superior workabilityComplete an installation simply by placing thesheet around the edges. The soft sheet willconfirm even to complex shapes.
For protection against fire for cable openings at steel cable conduit edges in wall or floor
FeatureEasy re-installationThe sheet can be removed and re-installed foreasy modification.
Method for steel cable conduit
Address: 5-1-8, HIGASHI-YAWATA, HIRATSUKA-CITY, KANAGAWA PREF. 254-0016 JAPANE-mail:[email protected] http://www.furukawa-ftm.com/
Fire-retardant sealing products for cable penetrationsOne-hour fire resistance certified by Japan Building Standards Act
Complete an installation simply by placing the sheet around the edges.
wall
floor
Applicablekit
Steel cable conduit size
(mm)
Sheet sizewidth × length
(mm)IB60 16 – 39 60 × 2000IB100 42 – 75 100 × 2000IB130 82 – 104 130 × 2000
FURUKAWA TECHNO MATERIAL CO., LTD.
Danseal- KP Putty
Easy installationFast and easy to fit. Facilitates reconstructionand replacement or addition of cables.A wide range of openingFits various opening sizes ranging up to 160mm.
For round wall openings For round floor openings
FeatureWide range of applicationsSuitable even for openings designed for usewith both cables and plastic conduits.
Method combining KP putty and other materials
ROKUMARU Sheet
KP Putty KP Putty
Address: 5-1-8, HIGASHI-YAWATA, HIRATSUKA-CITY, KANAGAWA PREF. 254-0016 JAPANE-mail:[email protected] http://www.furukawa-ftm.com/
Fire-retardant sealing products for cable penetrationsOne-hour fire resistance certified by Japan Building Standards Act
For all sealing needs, including sealing openings, gaps, and junctions in walls and floors
Soft and easy to fill
Extra-light; easily handled
Adheres to all common building materials
Excellent fire- and flame-resistance
Fire-rated extra-light putty
KP putty is a convenient, non-curing sealant ideal for all sealing needs, including fire protection sealing foropenings in fire compartment walls or floors of buildings and for penetrating sections of cables and pipes; sealingopenings that require protection against the entry of smoke, water, and small animals; and sealing finishing gaps injunctions. The putty is soft and moderately adhesive, with excellent adhesion to various building materials. With aspecific gravity of less than 1.0, the putty is also extremely lightweight, easily transported and handled, andeconomical.
Danseal- KP Putty
Flame
Smoke Water
2. Material properties
① Color: Gray② Consistency: 60 ± 15 (JIS A 5752)③ Specific gravity: 0.95 ± 0.1 (water displacement
method)④ Flame retardancy: Oxygen index 26 or higher;
UL94 V-0 (specimen thickness of 8mm)⑤ Heating loss: 105°C to 110°C, 3 hours, 1% or less
(JIS A 5752)⑥ Electrical insulation: Volume resistivity (room
temperature) 6.7 x 1011 Ω⋅cm⑦ Acce lera ted weather ing res is tance: No
abnormalities after 60 hours of testing in SuperUV Tester
FURUKAWA TECHNO MATERIAL CO., LTD.
1. Features
Soft and lightweight; easily sealed by hand.Single component putty system; no mixingnecessary.No curing after installation to facilitate re-installation.Flame-, weather-, and water-resistant.Stiffens when exposed to flames, becoming arefractory material.Asbestos-free.
⑧ Water resistance: No abnormalit ies afterimmersion in tap water (room temperature) for144 hours
⑨ Effects on metal: No abnormalities when appliedto Al, Cu, Pb, Fe, stainless steel, and brass (60°Cx 336 hours)
⑩ Effects on resin: No abnormalities when applied topolyethylene, cross-linked polyethylene, and PVC(60°C x 336 hours)
Address: 5-1-8, HIGASHI-YAWATA, HIRATSUKA-CITY, KANAGAWA PREF. 254-0016 JAPANE-mail:[email protected] http://www.furukawa-ftm.com/
4. Storage and use conditions
(1) Avoid exposure to direct sunlight or highhumidity. Store the product in a room at 40°C orless.
(2) Do not use the product in areas or partscontinuously immersed in water or in contactwith oil.
(3) Read the precautions printed on the product orthe MSDS, etc. for additional and detailedinformation.
5. Sales unit, packaging
500 g in polyethylene bag x 10 (5-kg corrugatedcardboard carton)500 g in polyethylene bag x 20 (10-kgcorrugated cardboard carton)
For more information on fire-retardant sealing methodsfor cable and piping penetrations, see the materials andinstallation procedures on the next page.
3. Fire resistance certification forpenetrations
(1) Wall opening, 160mm in diameter or less;applicable to cables and plastic cable conduits,Japan Building Standards Act Certification.
(2) Floor opening, 160mm in diameter or less;applicable to cables and plastic cable conduits,Japan Building Standards Act Certification.
(3) “A” class fire-resistant partition wall/floor for ships,300mm x 800mm or less, applicable to marinecables, Class NK (Japan ship classificationsociety) Certification.
Danseal- KP Putty