WWW.STETSONBUILDINGPRODUCTS.COM

SINCE

1955

YOUR PARTNER IN

QUALITY CONSTRUCTION

WWW.STETSONBUILDINGPRODUCTS.COM

FIRESTOPPINGSYSTEMS

HILTI FIRESTOP SOLUTIONS PROVIDE THE BEST POSSIBLE PROTECTION IN ALL KINDS OF CONDITIONS. • Firestop regulations, life safety and fire containment

• Fire protection systems can save lives and contain damage to a building during a fire.

• They’re also a code requirement

• Passive fire protection systems are designed to impede the spread of flames, smoke andtoxic gases in a fire.

• They help block gaps in walls, ceilings and floors caused by penetrations from pipes, cables and joints in fire-rated areas.

• So it’s important to include passive fire protection – firestop systems – in any building design, right from the start of a project.

ENGINEERING JUDGMENTSNo matter how many firestop systems there are, you’ll always encounter a unique condition that requires unconventional thinking. When there’s no tested and approved solution for a special opening or penetration through a fire-rated assembly, trust our firestop team. Your needs will be assessed and we will then do what it takes to help you design a comprehensive fire protection program—from custom drawings to expert engineering judgments and beyond.

CHOOSING THE RIGHT FIRE PROTECTION SOLUTION

HILTI FIRESTOPPING Cable ManagementCurtain WallSmoke & AcousticMEP PenetrationsInterior WallLarge Openings with Multiple PenetrationsSteel Protection

Firestop cast-in and drop-in devices For plastic and metal pipes in floor applications

Firestop putties Easy to wrap around cables

Fire-rated joint spray Seals construction joints

where maximum movement is required

Firestop Joint Devices for Metal Stud Framing

Firestop plugsSealing around cables and cable bundles in wall and floor openings

Firestop collar devices Designed to form a barrier for combustible plastic pipe penetrators

Firestop foam Designed for small to medium sized opening

Firestop Blocks Preformed reusable soft blocks, easy to install and dismantle

Firestop Sleeves Pre-engineered devices for optimal cable management

Firestop sealants For plastic and metal pipes

IMPROVING LIFE SAFETY & FIRE PROTECTIONFrom its inception, Thermafiber, Inc. (an Owens Corning company), has been dedicated to improving life safety and fire protection by manufacturing mineral wool insulation for commercial, residential and industrial applications. Today, Thermafiber mineral wool resists fire and temperatures in excess of 2,000˚ F while also providing sound control and energy conservation.

Our mineral wool contains a minimum of 70% recycled content, it’s non-combustible, inorganic and mold-resistant. Thermafiber is the #1 specified brand of commercial mineral wool.

THERMAFIBER SAFING: MINERAL WOOL INSULATION Thermafiber® Safing mineral wool insulation products are designed to provide enhanced fire protection in perimeter fire containment systems, floor and wall penetrations, construction joints, and other firestopping applications. These products are non-combustible, moisture-resistant, non-corrosive, nondeteriorating, mildew-resistant and vermin-resistant. Thermafiber® Safing provides thermal insulation, fire containment, and enhanced acoustical performance in many different UL and Intertek (formerly OPL) listed fire containment assemblies of 1, 2, and 3-hr ratings.

THERMAFIBER INDUSTRIAL FELTThermafiber Industrial Felt is an economical mineral fiber board for thermal, fire protection, and sound control applications. The fine-fiber, semi-rigid composition makes industrial felt easy to handle. It is available from 2.5 pcf to 12.0 pcf density along with many different facing options if needed. The wide range of densities make Thermafiber felt adaptable for industrial applications in a broad scope of low or high temperature applications. These products adsorb less than 1% moisture, are vermin-proof and mold resistant. On initial start-up only, heat rise should not exceed 15ºF per minute to allow binder to dissipate without excessive temperature rise. Thermal conductivity is not affected.

UNIFRAX

THERMAFIBER

FyreWrap Elite 1.5 Duct Insulation Air Distribution System (ADS) offers the following features:1- and 2-hour fire-rated enclosure (3 hour available)Alternate to fire-rated shaftZero clearance to combustibles at all locations on blanket wrapSaves weight, space, laborThin, lightweight single-layer systemHigh-temperature, biosoluble insulationDurable foil-scrim coveringGREENGUARD listed for Microbial Resistance

FYREWRAP® ELITE® 1.5 DUCT INSULATIONUnifrax’s FyreWrap® Elite® 1.5 Duct Insulation is a single layer flexible duct wrap enclosure for 1- and 2-hour fire-rated air distribution systems (ADS ducts). Typical duct types include smoke control, hazardous exhaust, laboratory chemical fume, stairwell and vestibule pressurization, ventilation, supply/return ducts, commercial dryer exhaust, as well as refuse and linen chutes. This slim, compact design is an alternate to code prescribed fire-rated shafts and results in significant weight, space and labor savings when compared to traditional shafts.

GREASE EXHAUST DUCTSUnifrax’s FyreWrap® Elite® 1.5 Duct Insulation is a two-layer flexible enclosure for two-hour rated commercial kitchen grease ducts. This flexible fire protection duct wrap meets the requirements defined by the International Mechanical Code (IMC), Uniform Mechanical Code (UMC), and the National Fire Protection Association (NFPA 96), and is an alternative traditional fire-rated shaftwall enclosure around ducts.

FYREWRAP® 0.5 PLENUM INSULATIONFyreWrap 0.5 Plenum Insulation offers an alternative to complete combustible item replacement, often resulting in significant cost and time savings. It is a high temperature single-layer insulation blanket that is used to wrap the combustible items in the plenum area. It is an alternative to removal and replacement of the combustible item with compliant non-combustible versions by preventing flame propagation and smoke development in the plenum area.

Product Information Sheet

Form C-1495Effective 2/17© 2017 Unifrax I LLCAll Rights ReservedPrinted in USAPage 5 of 6

Form C-1495Effective 2/17© 2017 Unifrax I LLCAll Rights ReservedPrinted in USAPage 6 of 6

The following are registered trademarks of Unifrax: FyreWrap, Elite and Insulfrax.

The test data shown are average results of tests conducted under standard procedures and are subject to variation. Results should not be usedfor specification purposes.

Product Information Sheets are periodically updated by Unifrax. Before relying on any data or other information in this Product Information Sheet, you should confirm that it is still current and has not been superseded. A Product Information Sheet that has been superseded may contain incorrect,obsolete and/or irrelevant data and other information.

Unifrax I LLCCorporate Headquarters600 Riverwalk Parkway Suite 120Tonawanda, NY 14150Telephone: 716-768-6500Internet: www.unifrax.comEmail: info@unifrax.com

IntroductionUnifrax’s FyreWrap® Elite® 1.5 Duct Insulation is a two-layerflexible enclosure for two-hour rated commercial kitchengrease ducts. FyreWrap Elite 1.5 Duct Insulation is tested per ASTM E2336 and is acceptable as an alternate to atraditional fire-rated shaft. Installed as a two-layer system,FyreWrap Elite 1.5 complies with the International MechanicalCode (IMC) and Uniform Mechanical Code (UMC). FyreWrapElite 1.5 Duct Insulation offers the following product features:• 2-hour fire-resistance rating• Alternate to shaft enclosure• Complies with IMC and UMC• Tested per ASTM E2336• Two-layer system • High-temperature, biosoluble insulation• Zero clearance to combustibles, at any location • GREENGUARD listed for Microbial Resistance

Typical Product ParametersThickness 1.5"Nominal Density 6pcfStandard Product Form Scrim EncapsulatedProduct Availability 24"w x 25LF

48"w x 25LF

FyreWrap® Elite® 1.5Duct Insulation – GreaseDuct ASTM E2336 System

Typical Product PropertiesICC Evaluation Services ........................................................Evaluation Report ESR-2224Intertek Laboratories (OPL) Listed, File 14870 ......................Duct System: Design No. UNI/BI 120-02, UNI/Bl 120-14,

UNI/WA 120-01ASTM E2336 ..........................................................................Passes all testsASTM E2336 Internal Grease Duct Test ................................Zero Clearance to Combustibles at all locations on wrapASTM E119 Full Scale Engulfment Test..................................2-hour Fire Resistance RatingASTM E119 Vertical Wall Test ................................................2-hour Fire Resistance RatingASTM E84, UL 723, ULC S102.2 – UL File No. R14514 Unfaced Blanket Encapsulated

Flame Spread/Smoke Developed Rating........................Zero/Zero

CEDAR RAPIDS, IA(319) 396-7272

DES MOINES, IA(515) 309-0393

DUBUQUE, IA(563) 582-5410

ELDRIDGE, IA(563) 285-4647

WATERLOO, IA(319) 236-5074

SINCE

1955

YOUR PARTNER IN

QUALITY CONSTRUCTION

Leaders in Construction Materials

BrockWhite.com | BorderCorp.com | Stetsons.com | Carter-Waters.com

Construction Supply Group is a leading distributor of specialty construction materials in the US and Canada. With 72 branches, over 1,100 associates and 5 operating companies, we have the products and expertise you need to get the job done.

BUILD WITH THE BEST

ANCHORING & FAS TENING

BUILDING ENVEL OPE SYS TEMS

Cladding Systems

FORM RENTAL & EQUIPMENT

Firestopping Systems

GENER AL SUPPLIES

GEOSY NTHE TICS

INSUL ATION PRODUC T S

Job Site T ool s

L ANDSCAPE PRODUC T S

MASONRY

PAVEMENT PRODUC T S

REBAR FABRICATION

ROOFING

SAFE T Y SUPPLIES

WATERPROOFING

Concre te CONS TRUC TIOn

WWW.STETSONBUILDINGPRODUCTS.COM

DECATUR, IL(217) 362-0600

ROCKFORD, IL(815) 398-6935

ROCK ISLAND, IL(309) 788-8412

URBANA, IL(217) 344-5400

OMAHA, NE(402) 331-0333

GRAND ISLAND, NE(308) 384-6677

MCFARLAND, WI (608) 838-5545

MADISON, WI(608) 222-1220