firmware updating procedure
TRANSCRIPT
RX-A770
1
Choose from the following 2 methods to update to the latest firmware.
Click here for Firmware Update Through the Internet (Connection to the Internet is required)
Click here for Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the Troubleshooting section
IMPORTANT NOTICE Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service required to restore proper operation will not be covered under the Yamaha Limited Warranty.
FIRMWARE UPDATING PROCEDURE
U
Firmwa
Require
1 Pow
2 Ent
3 Sel
4 Sta
While“ ADV* “
a. P
b. Th
a. P
(U
*
b. W
c. Tu
UPDATE SUC
MAIN ZONE k
are Upda
ement: Inte
You(See
wer off th
ter the AD
lect “FIRM
art firmwa
e pressing the S
VANCED SETADVANCED
ress the PROG
hen, press STR
ress INFO (WP
Update process
If “ UPDATEfrom Advanc
Caution DO NOT inte
In case the pthe troublesh
When completed
urn off the pow
PROGRAM
CCESS
key
te Throug
rnet connection
r receiver is coe owner’s man
he receive
DVANCE
M UPDAT
are updat
STRAIGHT key
TUP ” appears
SETUP ” is dis
GRAM key unti
RAIGHT key un
PS) key to start
s may take up t
E SUCCESS ” a
ced Setup. You
errupt power du
power is accidehooting method
d, “ UPDATE
wer of the receiv
IN
M key
gh the In
n
onnected to theual for details)
er (Stand
D SETUP
TE” from
te
y, press the MAon the front pa
splayed only fo
l “ UPDATE..ntil “ UPDATE
t the update.
to 15 minutes)
appears, this m
ur AV receiver iFirm
uring the updat
entally cut off red (Troublesho
SUCCESS ” ,
ver by pressing
NFO (WPS) key
PLEASE..
ternet
e Internet if you
dby mode
P mode
the men
AIN ZONE anel display.
or a few second
....USB ” is
.NETWORK ”
means your rec
s ready for normware update i
te.
esulting in a cooting CASE 2
“ PLEASE..
g the MAIN ZO
.
u can receive In
e)
u
key and keep S
ds.
displayed.
is displayed.
ceiver is already
rmal use. in progress
ndition where y) on the last pa
. ” and “ POW
ONE key.
STRAIGHT key
P
nternet radio st
STRAIGHT ke
y up-to-date. In
you can’t recovage.
WER OFF! ” a
POWER OFF
tations.
ey pressed unti
n this case, pow
ver normal ope
appears on the
RX-A770
2
!
l
wer off to exit
ration, refer to
display.
RX-A770
3
5 Check the updated firmware version
a. Power on the AV receiver and press the ON SCREEN key on the remote control.
b. Select “Information” > “System”.
c. Confirm that the firmware version is updated to the latest version.
ON SCREEN key
Congratulations! You have completed the firmware update. Your AV receiver is ready for normal use.
Firmwa
Requirem
1 Pre
Down
2 Pow
3 Ins
USB
4 Ent
While“ ADV
5 Sel
Press
are Upda
ment: USB(File
Firm
epare US
nload the firmw
wer off th
sert the U
port is located
ter the AD
e pressing the S
VANCED SET
lect firmw
s the PROGRA
USB p
MAIN ZONE
te by US
B thumb drive, e system with F
mware file provi
B thumb
ware, unzip and
he receive
SB thum
at the lower rig
DVANCE
STRAIGHT key
TUP ” appears
ware upda
AM key until “ U
port
key
B
with enough freFAT16 or FAT3
ded by YAMAH
drive for
d copy “Rxxxx-x
er (Stand
b drive
ght corner of th
D SETUP
y, press the MAon the front pa
ate from
UPDATE....
ee space to sto32 format)
HA, “Rxxxx-xxx
r the upda
xxxx.bin” into th
dby mode
he front panel.
P mode
AIN ZONE anel display.
the menu
.USB ” is disp
S
ore over 25MB
xx.bin”.
ate
he root director
e)
key and keep
u
played.
STRAIGHT key
B.
ry of the USB t
Drag & Drop
STRAIGHT ke
P
Rxxxx-xxxx
thumb drive.
the file into USB
ey pressed unti
PROGRAM key
x.bin
RX-A770
4
B thumb drive.
l
6 Sta
a. P
(U
*
b. W
c. Tu
7 Che
a. Po
b. Se
c. C
CongraYou have c
UPDATE SU
art firmwa
ress INFO (WP
Update process
If “ UPDATEfrom Advanc
Caution DO NOT inte
In case the pthe troublesh
When completed
urn off the pow
eck the u
ower on the AV
elect “Informat
onfirm that the
atulationscompleted the f
USB p
MAIN ZONE
CCESS
are updat
PS) key to start
s may take up t
E SUCCESS ” a
ced Setup. You
errupt power du
power is accidehooting method
d, “ UPDATE
wer of the receiv
updated f
V receiver and
ion” > “System
firmware vers
s! firmware updat
port
key
INF
te
t the update.
to 10 minutes)
appears, this m
ur AV receiver iFirm
uring the updat
entally cut off red (Troublesho
SUCCESS ” ,
ver by pressing
firmware
press the ON S
m”.
ion is updated
te. Your AV rec
FO (WPS) key
PLEASE..
means your rec
s ready for normware update i
te.
esulting in a cooting CASE 2
“ PLEASE..
g the MAIN ZO
version
SCREEN key o
to the latest ve
ceiver is ready
.
ceiver is already
rmal use. in progress
ndition where y) on the last pa
. ” and “ POW
ONE key.
on the remote
ersion.
for normal use
P
y up-to-date. In
you can’t recovage.
WER OFF! ” a
control.
ON
e.
POWER OFF
n this case, pow
ver normal ope
appears on the
SCREEN key
RX-A770
5
!
wer off to exit
ration, refer to
display.
RX-A770
6
CASE 1 Error message appeared during the update
Cause: For some reason, the receiver can’t read the firmware data.
Method: For your solution, check the following
[Update through Internet]
❏ Check Internet connection.
Your Internet connection is working by playing an Internet radio station. (See owner’s manual for details)
[Update by USB thumb drive]
❏ USB thumb drive is connected properly to the receiver.
❏ USB thumb drive is not password protected.
(AV receiver cannot read data from a security protected USB thumb drive)
❏ Make sure the USB thumb drive is inserted before the receiver is powered on for the
update.
❏ The firmware data, Rxxxx-xxxx.bin is stored in the root directory of the USB thumb drive.
❏ There is no other data except the firmware data in the USB thumb drive.
❏ No folders are created in the USB thumb drive.
Else, retry the update by USB using another USB thumb drive.
CASE 2 Firmware update doesn’t start for other reasons
● Receiver doesn’t power up after the update.
● Or, error message appeared when confirming the firmware version.
Recovery method using USB method: 1. Unplug the AC power cable from wall outlet.
2. Insert the USB thumb drive which has the firmware data stored inside, into the USB portlocated on the front panel.
3. Press and hold the PURE DIRECT key and keep it pressed while you plug the AC powercable back into the wall outlet again. “ USB UPDATE ” will appear on the front display. Then, release the PURE DIRECT key.
4. The update will start automatically. 5. When “ UPDATE SUCCESS ” , “ PLEASE... ” and “ POWER OFF! ” appears on
the display, firmware update is completed. Power off the receiver and remove the USB thumb drive.
6. Confirm updated firmware version.
PURE DIRECT key
USB port
Troubleshooting
UPDATE SUCCESS POWER OFF! PLEASE...USB UPDATE