AIDA 3rd Annual Meeting 1

First test of MCM prototype board

1G. De Lentdecker2L. Jönsson 2U. Mjornmark

1Y. Yang 3F. Zhang

1 Université Libre de Bruxelles2 Lund University3Central China Normal University

AIDA 3rd Annual Meeting 2

Agenda

• Background• Test setup• Current status and future plan

AIDA 3rd Annual Meeting 3

MCM on a pad module

The Large PrototypeTPC

Scalable Readout Unit (SRU)

Background

TLU

AIDA 3rd Annual Meeting 4

190 mm 32.5 mm

FEC

MCM

8.9 mm

25 mm170 mm

19 cm

17cm

32.5 mm

25mm

8.9 mm

12mm

FEC with 8 ALTRO MCM with 8 SALTRO on carrier boards Carrier Board

Carrier Board PCB

CPLD

PadPadModule

Sideviewsof anMCM

Background

AIDA 3rd Annual Meeting 5

Background

DTC link to SRU

XO2-4000JTAG

SALTRO

Proto-MCM board

AIDA 3rd Annual Meeting 6

Test setup

MCM programmer

OscilloscopeLogic AnalyzerSRU programmer

DAQ PC(DDL based)

DAQ PC(Ethernet based)

AIDA 3rd Annual Meeting 7

Test setup

AIDA 3rd Annual Meeting 8

Current status and future plan

• Current status:• DTC protocol implemented on CPLD (160Mbps) • Communication between CPLD and Saltro (Verified by

accessing register) • Implement Ethernet based slow control path• Future plan:• Three identical setup at Lund, Brussels and Wuhan• Further firmware design (power pulsing and I2C

configuration etc)• Development of Ethernet based DAQ system• Common DAQ integration

AIDA 3rd Annual Meeting 9

Thank you !

backup

Two possible way to connect TLU and SRURJ45 to DTC (only asynchronous mode )Passive board convert HDMI to LVDSBoth need modification of SRU firmware