fittings and accessories - beka lube · 1002060030 4 4,05 6 5 8 3 brass 1002060040 6 6,05 8 7 9,5 4...
TRANSCRIPT
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402Table of contects
Ta
ble
of
conte
nts
10
10-0
-00-0
1
Fittings
Union screws similar to DIN 3871 ....................................................................................................... 10-1-10-01
Olives
Union screws for polyamide pipes ....................................................................................................... 10-1-10-02
Conical rings
Union nuts ........................................................................................................................................... 10-1-10-03
Cutting rings ........................................................................................................................................ 10-1-10-04
Connecting pieces ............................................................................................................................... 10-1-10-05
Male stud couplings (with olive) ........................................................................................................... 10-1-10-06
Male stud couplings (with cutting ring) ................................................................................................ 10-1-10-08
Male elbow couplings (with olive) ........................................................................................................ 10-1-10-10
Male elbow couplings (with cutting ring) .............................................................................................. 10-1-10-11
Swiveling elbow couplings (with olive) ................................................................................................. 10-1-10-12
Swiveling elbow couplings (with cutting ring) ...................................................................................... 10-1-10-13
Swiveling elbow couplings - special mode (with olive) ........................................................................ 10-1-10-14
Connecting fittings (with cutting ring) ................................................................................................... 10-1-10-15
Angular fittings (with cutting ring)
T-fittings ............................................................................................................................................... 10-1-10-16
L-fittings ............................................................................................................................................... 10-1-10-17
Bulkhead fittings .................................................................................................................................. 10-1-10-18
Reducer fittings .................................................................................................................................... 10-1-10-19
Fittings with plug-type connection, ........................................................................................................ 10-1-20-01
Screw-in plug-type connectors version HX
Reductions for the installation into metering distributor blocks with plug-type connection .................. 10-1-20-04
Screw-in plug-type connectors version HL and HL with taper thread......................................................10-1-20-05
Sealing rings, ventilation screw ........................................................................................................... 10-1-30-01
Accessory
Polyamide pipes, insert sleeves .......................................................................................................... 10-2-10-01
Steel and copper pipes ........................................................................................................................ 10-2-10-02
High-pressure hose and accessories .................................................................................................. 10-2-10-03
Pipe clamps ......................................................................................................................................... 10-2-20-01
Intake filter ........................................................................................................................................... 10-2-20-03
Oil application brushes ........................................................................................................................ 10-2-20-04
Grease filter ......................................................................................................................................... 10-2-20-05
Control panel ....................................................................................................................................... 10-2-20-06
Reservoir ............................................................................................................................................. 10-2-30-01
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
Fittings
10-1
-10-0
1Fit
tings
0903 8710 07111 2,5 M6x0,75 9 6 7 LL
0903 8710 02111 4 M8x1 12 8 8 LL
0903 8710 04111 6 M10x1 13 9 10 LL
0903 8710 09111 8 M12x1 14 9,5 12 LL
0903 8710 08112 6 M12x1,5 16 11,5 12 L
0903 8710 01112 8 M14x1,5 16 11,5 14 L
0903 8710 05112 10 M16x1,5 17 11,5 17 L
Union screwsto DIN 3871, for olives DIN 3862similar
Material: steel**
Order-no. Pipe Ø M l l1 AF Series*
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Olivesacc. to DIN 3862
Order-no. Pipe Ø ØD L Ød1 Ød2 Material
09038620053 2,5 4,5 5,0 2,5 2,8 brass
09038620013 4 6 5,5 4 4,3 brass
09038620023 6 8 6,5 6 6,4 brass
09038620033 8 10 6,5 8 8,5 brass
09038620043 10 12 7,5 10 10,5 brass
Union screws, olives
Pipe Ø
Olive
Unionscrew
Pipe
M
l1
AF
l
L
Ød1
Ød2
ØD
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-0
2
1002010022 2,5 M6x0,75 9 6,1 7
1002010030 4 M8x1 12 8 8
1002010040 6 M10x1 13 9 10
1002010050 8 M14x1,5 16 11,5 14
1002010070 10 M16x1,5 17 11,5 17
1002060020 2,5 2,55 4,5 3,4 6,4 2,5 brass
1002060030 4 4,05 6 5 8 3 brass
1002060040 6 6,05 8 7 9,5 4 brass
1002060050 8 8,05 10 9 11 5 brass
1002060070 10 10,01 12 11 12,5 6 brass
Union screws for polyamide pipeMaterial: brass (CuZn39Pb3)
Order-no. Pipe Ø M l l1 AF
Conical ringsfor polyamide pipe
Order-no. Pipe Ø Ød ØD ØD1 l l1 Material
Union screws, olives
Fittings
Fit
tings
l1l
ØD
ØD1
Ød
Pipe Ø
Olive
Unionscrew
Polyamide pipe
M
l1
AF
l
Insert sleeve
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-0
3
04031500106 4 M8x1 12 8 LL
04031500306 6 M10x1 11,5 12 LL
04031500406 8 M12x1 12 14 LL
04031501006 6 M12x1,5 14,5 14 L
04031501106 8 M14x1,5 14,5 17 L
04031502006 6 M14x1,5 16,5 17 S
04031502106 8 M16x1,5 16,5 19 S
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Stainless steel on demand*** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
0802000111 2,5 M8x1 11 10 LL F0422/08-01
0802000224 4 M8x1 11 10 LL nach 476
0802000225 6 M10x1 11,5 12 LL nach 476
0802000226 8 M12x1 12 14 LL nach 476
0802000227 6 M12x1,5 15 14 L nach 476
0802000228 8 M14x1,5 15 17 L nach 476
0802000229 10 M16x1,5 16 19 S nach 476
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fit
tings
Union nuts
Fittings
H
M
Pip
e Ø
Union nutfor olives DIN 3862Material: steel**
Order-no. Pipe Ø M H AF Series* Annotation
AF
Union nutfor cutting rings DIN 3861Material: steel***
Order-no. Pipe Ø M H AF Series* Annotation**
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-0
4
L
ØD
04031520105 4 6 LL steel**
09038610601212 6 7 LL steel**
04031520405 8 7 LL steel**
09038610603211 6 9,5 L / S steel**
04031521013 6 9,5 L / S stainless steel
09038670803211 8 9,5 L / S steel**
04031521113 8 9,5 L / S stainless steel
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Cutting rings
Cutting ringsacc. to DIN 3861
Article no. Pipe ØD L Series* Material
Fittings
Fit
tings
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-0
5Fit
tings
Connecting piecewith cylindrical or conical screw-in thread Material steel**
Article no. Pipe Ø M1 M2 L1 L2 AF Screw-in thread
1002 1000 303 4 M8 M8x1 22 8 11 cylindrical
1002 1000 304 4 M8x1 M8x1 18 7,5 cylindrical
1002 1000 306 4 M10x1 M8x1 18 7,5 14 cylindrical
1002 1000 309 4 M12x1 M8x1 18 9 17 cylindrical
1002 1000 311 4 M14x1,5 M8x1 18 9 17 cylindrical
1002 1000 404 6 M8x1 M10x1 23 7,5 14 cylindrical
1002 1000 406 6 M10x1 M10x1 20,5 7,5 14 cylindrical
1002 1000 409 6 M12x1 M10x1 20,5 9 17 cylindrical
1002 1000 411 6 M14x1,5 M10x1 20,5 9 17 cylindrical
1002 1000 412 6 M16x1,5 M10x1 20,5 9 19 cylindrical
1002 1000 410 6 G1/4 M10x1 21,5 10 17 cylindrical
1002 1000 413 6 G3/8 M10x1 22,5 10 22 cylindrical
1002 1000 606 8 M10x1 M14x1,5 28 7,5 17 cylindrical
1002 1000 609 8 M12x1 M14x1,5 29 9 17 cylindrical
1002 1000 611 8 M14x1,5 M14x1,5 26 9 17 cylindrical
1002 1000 612 8 M16x1,5 M14x1,5 22 9 19 cylindrical
1002 1000 614 8 M18x1,5 M14x1,5 22 10 22 cylindrical
1002 1000 617 8 M22x1,5 M14x1,5 24 12 27 cylindrical
1002 1000 610 8 G1/4 M14x1,5 23 10 17 cylindrical
1002 1000 709 10 M12x1 M16x1,5 31 9 19 cylindrical
1002 1000 711 10 M14x1,5 M16x1,5 29 9 19 cylindrical
1002 1000 712 10 M16x1,5 M16x1,5 23 9 19 cylindrical
1002 1000 714 10 M18x1,5 M16x1,5 24 10 22 cylindrical
1002 1000 717 10 M22x1,5 M16x1,5 24 12 27 cylindrical
1002 1000 710 10 G1/4 M16x1,5 30 10 19 cylindrical
1002 1000 716 10 G1/2 M16x1,5 24 12 27 cylindrical
1002 1000 301k 4 M6k M8x1 20 6 11 conical*
1002 1000 302k 4 M6x0,75k M8x1 20 6 11 conical*
1002 1000 304k 4 M8x1k M8x1 17 7,4 11 conical*
1002 1000 306k 4 M10x1k M8x1 16 7,4 11 conical*
1002 1000 307k 4 R1/8"k M8x1 16 6 11 conical*
1002 1000 310k 4 R1/4"k M8x1 14 9 14 conical*
1002 1000 406k 6 M10x1k M10x1 23 7,4 14 conical*
1002 1000 409k 6 M12x1k M10x1 18 7,4 14 conical*
1002 1000 407k 6 R1/8"k M10x1 21 6 14 conical*
1002 1000 410k 6 R1/4"k M10x1 20 9 17 conical** Conical screw threads can only be sealed by plastic or fluid sealing compounds!** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Connecting pieces
Fittings
AF
Pip
e Ø
L2
L1
Insert sleeve
Conicalring
Union screw
Polyamide pipe Connecting piece
M1
M2
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-0
6
04012012405D GE4M5LL 4 LL M5 10 6 19 11 M8x1 10 10
04012011305D GE4M6LL 4 LL M6 10 11 16 11 M8x1 10 10
04012012605D GE4M6.0,75LL 4 LL M6x0,75 10 8 21 11 M8x1 10 10
04012011205D GE4M8LL 4 LL M8 12 8 21 11 M8x1 12 10
04012010706D GE4M8.1LL 4 LL M8x1 12 8 21 11 M8x1 12 10
04012010206D GE4M10.1LL 4 LL M10x1 14 8 21 11 M8x1 14 10
04012000706D GE6M8.1LL 6 LL M8x1 12 8 22 10 M10x1 12 12
04012000206DL GE6M10.1L 6 L M10x1 14 8 23 8,5 M10x1 14 12
04012000205DLL GE6M10.1LL 6 LL M10x1 14 8 23 8,5 M10x1 14 12
04012020206D GE8M10.1LL 8 LL M10x1 14 8 23 8,5 M12x1 14 14
04012010906D GE4G1/8LL 4 LL G1/8 14 8 21 11 M8x1 14 10
04012000906D GE6G1/8LL 6 LL G1/8 14 8 23 8,5 M10x1 14 12
04012001006D GE6G1/4L 6 L G1/4 18 12 28 13 M12x1,5 19 14
04012020905D GE8G1/8LL 8 LL G1/8 14 8 23 9 M12x1 14 14
04012021005D GE8G1/4L 8 L G1/4 17 12 25 10 M14x1,5 17 17
04012031005D GE10G1/4L 10 L G1/4 17 12 26 11 M16x1,5 17 19
04012002805D GE6M12.1LL 6 LL M12x1 16 8 24 10 M11x1 17 14 steel**
04012022805D GE8M12.1LL 8 LL M12x1 16 8 25 10 M16x1 17 19 steel**
04012032805D GE10M12.1LL 10 LL M12x1 16 8 26 11 M16x1 17 19 steel**
Male stud couplings
with olive
Fittings
Fit
tings
M ØD
iL2
approx. L1
S1S2
Ød
m
Male stud coupling with olive acc. to DIN 3862with cylindrical threadMaterial: steel**
Article no. Designation Series*Ød M ØD i L1 L2 m S1 S2
with olive acc. to BEKA-Norm
Article no. Designation Series*Ød M ØD i L1 L2 m S1 S2 Material
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-0
7
04012010406D GE4M6KLL 4 LL M6k 6 27 M8x1 10 10
04012010106D GE4M8KLL 4 LL M8k 8 26 M8x1 10 10
04012010506D GE4M8.1KLL 4 LL M8x1k 8 27 M8x1 10 10
04012010306D GE4M10.1KLL 4 LL M10x1k 8 26 M8x1 12 10
04012000505D GE6M8.1KLL 6 LL M8x1k 8 32 M10x1 12 12
04012000305D GE6M10.1KLL 6 LL M10x1k 8 28 M10x1 12 12
04012020306D GE8M10.1KLL 8 LL M10x1k 8 29,5 M12x1 14 14
04012010606D GE4R1/8KLL 4 LL R1/8"k 8 27 M8x1 10 10
04012020605D GE8R1/8KLL 8 LL R1/8"k 8 29,5 M14x1,5 14 14
04012020805D GE8R1/4KL 8 L R1/4"k 12 38 M14x1,5 17 17
04012030805D GE10R1/4KL 10 L R1/4"k 12 38 M16x1,5 17 19
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Conical screw threads can only be sealed by plastic or fluid sealing compounds!*** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fit
tings
Male stud couplings
with olive
Fittings
Male stud coupling with olivewith conical screw-in threadMaterial: steel**
Article no. Designation Series*ØD M** i L m S1 S2 Annotation
Mm
S1S2
ØD
i
approx. L
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-0
8
04012000206 GE6M10.1L 6 L M10x1 14 8 16,5 31 14 14
04012000213 GE6M10.1L 6 L M10x1 14 8 16,5 31 14 14 stainl. steel
04012000906LL GE6G1/8LL 6 LL G1/8 14 8 16 28 14 12
04012000906 GE6G1/8L 6 L G1/8 14 8 16,5 31 14 14
04012001006L GE6G1/4L 6 L G1/4 18 12 22 37 19 14
04012001006 GE6G1/4S 6 S G1/4 18 12 25 40 19 17
04012001013 GE6G1/4S 6 S G1/4 18 12 25 40 19 17 stainl. steel
04012001406 GE6G3/8L 6 L G3/8 22 12 23,5 38 22 14
04012020213 GE8M10.1LL 8 LL M10x1 17 12 22 37 17 17 stainl. steel
04012020906 GE8G1/8LL 8 LL G1/8 14 8 18 29 14 14
04012020913 GE8G1/8LL 8 LL G1/8 14 8 18 29 14 14 stainl. steel
04012021006 GE8G1/4L 8 L G1/4 18 12 22 37 19 17
04012021013 GE8G1/4L 8 L G1/4 18 12 22 37 19 17 stainl. steel
04012021006S GE8G1/4S 8 S G1/4 18 12 27 42 19 19
04012021406 GE8G3/8L 8 L G3/8 22 12 23,5 38 22 17
04012021413 GE8G3/8L 8 L G3/8 22 12 23,5 38 22 17 stainl. steel
04012021606 GE8G1/2L 8 L G1/2 26 14 27 42 27 17
04012031006 GE10G1/4L 10 L G1/4 18 12 23 38 19 19
04012031406 GE10G3/8L 10 L G3/8 22 12 24,5 39 22 19
04012031606 GE10G1/2L 10 L G1/2 26 14 27 42 27 19
04012041006 GE12G1/4L 12 L G1/4 18 12 23 38 19 22
04012041406 GE12G3/8L 12 L G3/8 22 12 24,5 39 22 22
04012041606 GE12G1/2L 12 L G1/2 26 14 27 42 27 22
04012051406 GE15G3/8L 15 L G3/8 22 12 25,5 41 22 27
04012051606 GE15G1/2L 15 L G1/2 26 14 28 43 27 27
Male stud couplings
with cutting ring
Fittings
Fit
tings
Male stud coupling with cutting ringwith cylindrical screw-in threadMaterial: steel**
Article no. Designation *Ød Series M ØD L1 L2 L3 S1 S2 Annotation
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
MØD
L1
L2
approx. L3
S1 S2
Ød
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-0
9
04012010406 GE4M6KLL 4 LL M6k 8 16 26 10 10
04012010506 GE4M8.1KLL 4 LL M8x1k 8 16 26 10 10
04012010513 GE4M8.1KLL 4 LL M8x1k 8 16 26 10 10 stainl. steel
04012010306 GE4M10.1KLL 4 LL M10x1k 8 14,5 26 11 12
04012000406 GE6M6KLL 6 LL M6k 8 14,5 26 11 12
04012000413 GE6M6KLL 6 LL M6k 8 14,5 26 11 12 stainl. steel
04012000506 GE6M8.1KLL 6 LL M8x1k 8 14,5 26 11 12
04012000513 GE6M8.1KLL 6 LL M8x1k 8 14,5 26 11 12 stainl. steel
04012000306 GE6M10.1KLL 6 LL M10x1k 8 14,5 26 11 12
04012000313 GE6M10.1KLL 6 LL M10x1k 8 14,5 26 11 12 stainl. steel
04012000606 GE6R1/8KLL 6 LL R1/8"k 8 14,5 26 11 12
04012000613 GE6R1/8KLL 6 LL R1/8"k 8 14,5 26 11 12 stainl. steel
04012000806 GE6R1/4KS 6 S R1/4"k 11,5 23,5 40 17 17
04012020306 GE8M10.1KLL 8 LL M10x1k 8 16,5 28 12 14
04012020313 GE8M10.1KLL 8 LL M10x1k 8 16,5 28 12 14 stainl. steel
04012020806 GE8R1/4KL 8 L R1/4"k 12 20 35 17 17
Fit
tings
Male stud couplings
with cutting ring
Fittings
coupling with cutting ringMale studwith conical screw-in threadMaterial: steel*** or stainless steel
Article no. Designation *ØD Series M** L1 L2 L3 S1 S2 Annotation
L1
L2
approx. L3
M
S1 S2
ØD
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Conical screw threads can only be sealed by plastic or fluid sealing compounds!*** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-1
0
04012210105D WE4M8KLL 4 LL M8k 8 9 21 15 10 10
04012210505D WE4M8.1KLL 4 LL M8x1k 8 11 21 17 9 10
04012200505D WE6M8.1KLL 6 LL M8x1k 11 9 24,5 16,5 11 12
04012210305D WE4M10.1KLL 4 LL M10x1k 10 10 22 15 12 10
04012220305D WE8M10.1KLL 8 LL M10x1k 8 11,5 23 20 12 14
04012210605D WE4R1/8KLL 4 LL R1/8"k 8 11 21 17 9 10
04012200605D WE6R1/8KLL 6 LL R1/8"k 8 9,5 21 17 9 12
04012220605D WE8R1/8KLL 8 LL R1/8"k 8 11,5 23 20 12 14
04012220805D WE8R1/4KL 8 L R1/4"k 12 14 29 26 12 17
04012230805D WE10R1/4KL 10 L R1/4"k 12 15 30 27 14 19
Male elbow coupling
with olive
Fittings
Fit
tings
approx. L2
L3
i
M
L1
ØDS1 S2
Male elbow coupling with olive and conical screw-in threadMaterial: steel***
Article no. Designation *ØD Series M** i L1 L2 L3 S1 S2
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Conical screw threads can only be sealed by plastic or fluid sealing compounds!*** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-1
1
04012210406 WE4M6KLL 4 LL M6k 8 11 21 17 9 10
04012210506 WE4M8.1KLL 4 LL M8x1k 8 11 21 17 9 10
04012210513 WE4M8.1KLL 4 LL M8x1k 8 11 21 17 9 10 stainl. steel
04012210306 WE4M10.1KLL 4 LL M10x1k 10 11 21 17 11 10
04012210613 WE4R1/8KLL 4 LL R1/8"k 8 11 21 18 11 10 stainl. steel
04012200406 WE6M6KLL 6 LL M6k 8 9,5 21 17 11 12
04012200413 WE6M6KLL 6 LL M6k 8 9,5 21 17 11 12 stainl. steel
04012200506 WE6M8.1KLL 6 LL M8x1k 11 9,5 21 17 11 12
04012200513 WE6M8.1KLL 6 LL M8x1k 11 9,5 21 17 11 12 stainl. steel
04012200306 WE6M10.1KLL 6 LL M10x1k 9 9,5 21 17 11 12
04012200313LL WE6M10.1KLL 6 LL M10x1k 9 9,5 21 17 11 12 stainl. steel
04012201006 WE6M10.1KL 6 L M10x1k 9 12 27 20 12 14
04012200606 WE6R1/8KLL 6 LL R1/8"k 8 10 22 17 11 12
04012200613LL WE6R1/8KLL 6 LL R1/8"k 8 10 22 17 11 12 stainl. steel
04012200806 WE6R1/4KS 6 S R1/4"k 10 16 31 27 14 17
04012200813 WE6R1/4KS 6 S R1/4"k 10 16 31 27 14 17 stainl. steel
04012220306 WE8M10.1KLL 8 LL M10x1k 8 11,5 23 20 12 14
04012220313 WE8M10.1KLL 8 LL M10x1k 8 11,5 23 20 12 14 stainl. steel
04012220606 WE8R1/8KLL 8 LL R1/8"k 8 11,5 23 20 12 14
04012220613 WE8R1/8KLL 8 LL R1/8"k 8 11,5 23 20 12 14 stainl. steel
04012220806 WE8R1/4KL 8 L R1/4"k 12 14 29 27 14 17
04012220813 WE8R1/4KL 8 L R1/4"k 12 14 29 27 14 17 stainl. steel
04012230806 WE10R1/4KL 10 L R1/4"k 12 15 30 27 17 19
04012243306 WE12R3/8KL 12 L R3/8"k 12 17 32 28 19 22
Fit
tings
Male elbow coupling
with cutting ring
Fittings
Male elbow couplings with cutting ring and conical screw-in threadMaterial: steel***
Article no. Designation *ØD Series M** i L1 L2 L3 S1 S2 Annotation
approx. L2
L3
i
M
L1
ØD
S1 S2
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Conical screw threads can only be sealed by plastic or fluid sealing compounds!*** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-1
2
04013352606ÜS 2,5 M6x0,75 6 24 7 25,5 6 12 8 12
04013211306ÜS 4 M6 6 24 7 25,5 6 12 8 12
04013212606ÜS 4 M6x0,75 6 24 7 25,5 6 12 8 12
04013211206ÜS 4 M8 6 24 7 25,5 6 12 8 12
04013210706ÜS 4 M8x1 6 24 7 25,5 6 12 8 12
04013210206ÜS 4 M10x1 7 26,5 8 26,5 7 14 8 14
04013210906ÜS 4 G1/8 7 26,5 8 26,5 7 14 8 14
04013200206ÜS 6 M10x1 7 26,5 8 28,5 6,5 14 10 14
04013200906ÜS 6 G1/8 7 26,5 8 28,5 6,5 14 10 14
04013202806ÜS 6 M12x1 10 35 10 30,5 8,5 18 10 19
04013201006ÜS 6 G1/4 10 35 10 30,5 8,5 18 10 19
FA
Z03259-0
0
10024000201 2,5 M6x0,75 M6 6 24 18 24 12
10024000308 4 M5 M8x1 6 24 18 24 12
10024000309 4 M6 M8x1 6 24 18 24 12
10024000301 4 M6x0,75 M8x1 6 24 18 24 12
10024000303 4 M8 M8x1 6 24 18 24 12
10024000305 4 M8x1 M8x1 6 24 18 24 12
10024000310 4 M10x1 M8x1 7 26,5 19 26 14
10024000307 4 G1/8 M8x1 7 26,5 19 26 14
10024000406 6 M10x1 M10x1 7 26,5 20 27 14
10024000409 6 M12x1 M10x1 10 35 22 31 17
10024000410 6 G1/4 M10x1 10 35 22 31 19
10024000407 6 G1/8 M10x1 7 26,5 20 27 14
10024000609 8 M12x1 M14x1,5 7 34 29 39 17
FA
Z04158-0
0
* Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Swiveling elbow coupling
with olive
Fittings
Fit
tings
Swiveling elbow coupling with olive and cylindrical screw-in threadMaterial: steel*Operating pressure: max. 100 bar
Article no. ØD M i L1 L2 L3 L4 S1 S2 S3
M
L4approx. L3
iL2L
1
S1S2
S3
ØD
M
i
L1
L2L3
S1
m
Swiveling elbow couplings with cylindrical screw-in threadMaterial steel*
Article no. Pipe-Ø M m i L1 L2 L3 S1
* Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Swiveling elbow couplings with cylindrical screw-in threadMaterial steel*
Article no. Pipe-Ø M m i L1 L2 L3 S1
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-1
3
04013210206 LL 4 M10x1 6 13 20 9,5 22 10 14 14 12
04013210706 LL 4 M8x1 6 13 18 8 21 11,5 14 14 10
04013200706 LL 6 M8x1 6 13 20 9,5 22 10 14 14 12
04013200206LL LL 6 M10x1 6 13 20 9,5 22 10 14 14 12
04013200206 L 6 M10x1 6 14,5 22 10 26 11,5 14 17 14
04013200906 L 6 G1/8 6 14,5 22 10 26 11,5 14 17 14
04013201006 S 6 G1/4 9 18 26 12,5 29 14,5 19 19 17
04013220206LL LL 8 M10x1 6 13 21,5 10 23 11 14 14 14
04013220706N LL 8 M8x1 6 13 21,5 10 23 11 14 14 14
04013220906 LL 8 G1/8 6 13 21,5 10 23 11 14 14 14
04013221006 L 8 G1/4 9 18 26 12,5 28 13 19 19 17
04013231006 L 10 G1/4 9 19 26 13,5 30 15 19 22 19
04013231406 S 10 G3/8 9 21,8 32 15,5 32 16 22 24 22
04013241406 L 12 G3/8 9 21,8 32 15,5 31 16 22 24 22
Swiveling elbow coupling with cutting ring and cylindrical screw-in threadMaterial: steel**
Article no. Series* ØD M i D L1 L2 L3 L4 S1 S2 S3
Fit
tings
Fittings
Swiveling elbow couplings
with cutting ring
M
D
L4approx. L3
iL2
L1
S1S2 S3
ØD
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-1
4
04062239 LL 19,7
04062254 18
FA
Z03510-0
1
Swiveling elbow coupling
with olive
Fittings
Fit
tings
Swiveling elbow coupling (special model)Material: steel**
Article no. Series* L
17
M6M
8x1
L
AF
10
AF
95
Sealing ring (Cu)
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-1
5
04013600106 G4LL 4 LL 31 12 9 10
04013600306 G6LL 6 LL 32 9 11 12
04013600313 G6LL 6 LL 32 9 11 12 stainl. steel
04013601006 G6L 6 L 39 10 12 14
04013602006 G6S 6 S 45 16 14 17
04013600406 G8LL 8 LL 35 12 12 14
04013601106 G8L 8 L 40 11 14 17
04013602106 G8S 8 S 47 18 17 19
04013601206 G10L 10 L 42 13 17 19
04013620106 W4M8.1LL 4 LL M8x1 21 15 11 3 9 10
04013620306 W6M10.1LL 6 LL M10x1 21 15 9,5 4,5 9 12
04013620406 W8M12.1LL 8 LL M12x1 23 17 11,5 6 12 14
04013621206 W10M16.1.5L 10 L M16x1,5 30 22 15 8 14 19
Fit
tings
Fittings
Connection fittings
with cutting ring
Connection fittings with cutting ringMaterial: steel**
Article no. Designation *ØD Series L1 L2 S1 S2 Annotation
L2
approx. L1
S1 S2
ØD
Swiveling elbow coupling with cutting ring and union nutMaterial: steel**
Article no. Designation *ØD Series m L1 L2 L3 Ød1 S1 S2
L3
S2
L2
S1
ØD
approx. L1
m
ØD
Ød1
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-1
6
0401 3640 106 T4LL 4 LL 21 11 10 10
0401 3641 006 T6L 6 L 27 12 12 14
0401 3640 306 T6LL 6 LL 21 9,5 11 12
0401 3642 006 T6S 6 S 31 16 14 17
0401 3641 106 T8L 8 L 29 14 14 17
0401 3640 406 T8LL 8 LL 23 11,5 12 14
0401 3641 206 T10L 10 L
0401 4100 406 TR 6.4.6 LL 6 4 6 LL 39 25 14 10 14
0401 4101 706 TR 8.6.8 L 8 6 8 L 29 14 17 14 12
0401 4102 106 TR10.6.10 L 10 6 10 L 30 15 19 14 14
0401 4102 706 TR8.10.8 L 8 10 8 L 30 15 17 19 17
0401 4102 506 TR10.8.10 L 10 8 10 L 45 15 19 17 17
Fittings
Fit
tings
T-form reducer fitting with cutting ringMaterial: steel**
Article no. Designation d1 *d2 d3 Series L1 L2 S1 S2 S3
appro
x. L
1
approx. L1
L2
L2
S1S3
S2
d3d1
d2
T-fitting with cutting ringMaterial: steel**
Article no. Designation *ØD Series L1 L2 S1 S2
T-fittings
with cutting ring
ØD
appro
x. L
1
approx. L1L2
L2
S1 S2
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-1
7
T-fitting, adjustable, with cutting ringMaterial: steel**
Article no. Series*
0401 5722 006 S
0401 5821 006 L 6 M12x1,5 27 12 26 14 12
0401 5821 106 L 8 M14x1,5 29 14 27,5 17 12
0401 5822 006 S 6 M14x1,5 31 16 27 17 12
0401 5822 106 S 8 M16x1,5 32 17 27,5 19 14
0401 5821 206 L 10 M16x1,5 30 15 29 19 14
Fit
tings
Fittings
T- and L-fittings
with cutting ring
appro
x. 2
7
M14x1,5
16,5
approx. 27
AF 13 AF 17
Ø6
L-fitting, adjustable, with cutting ringMaterial: steel**
Article no. Series* ØD M L1 L2 L3 S1 S2
ØD
ØD
S2
S1
appro
x. L
3
M
L2
approx. L1
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-10-1
8
S2 S3
ØD
M
t
S1
ØD
ca. L1
L2
ca. L3
L4
0401 4701 006 6 L M12x1,5 42 27 22 7 14 17 17 16
0401 4701 013 6 L M12x1,5 42 27 22 7 14 17 17 16 Edelstahl
0401 4701 106 8 L M14x1,5 42 27 23 8 17 19 19 16
0401 4701 113 8 L M14x1,5 42 27 23 8 17 19 19 16 Edelstahl
0401 4721 006 6 L M12x1,5 42 27 27 12 14 14 17 12 16
0401 4721 013 6 L M12x1,5 42 27 27 12 14 14 17 12 16 Edelstahl
0401 4722 006 6 S M14x1,5 44 29 31 16 17 17 19 12 16
0401 4721 106 8 L M14x1,5 42 27 29 14 17 17 19 12 16
Bulkhead fittings
Fittings
Fit
tings
S2 S3
ØD
M
t
S1
ØD
approx. L1
L2
approx. L3
L4
M
S3 S2 S1
ØD
L4
appro
x. L
3
t
approx. L1
L5
ØD
L2
Straight bulkhead fitting with cutting ringMaterial: steel**
Article no. ØD Series* M L1 L2 L3 L4 S1 S2 S3 t Annotationmax
Angular bulkhead fitting with cutting ringMaterial: steel**
Article no. ØD Series* M L1 L2 L3 L4 L5 S1 S2 S3 t Annotationmax max
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-10-1
9
04060957
Bulkhead fitting with cutting ringMaterial: steel**
Article no. Pipe ØD M1 M2 L1 L2 AF
1002 5000 311 4 M14x1,5 M8x1 27 19 17
1002 5000 311L 4 M14x1,5 M8x1 38 30 17
1002 5000 411 6 M14x1,5 M10x1 30 20 17
1002 5000 715 10 M20x1,5 M16x1,5 42 27 24
Fit
tings
Fittings
Bulkhead fittings, fittingsreducer
AF 17 AF 17 AF 19
M14x1
,5
Ø6
29,5
Ø8
approx. 51
L2
AF
L1
M1
M2
M2 Pip
e Ø
D
Reducer fitting with cutting ringMaterial: steel*
Article no.
* Per. operating pressure: Series LL: 100 bar Series L: 250 bar Series S: 400 bar** Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
* Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-20-0
1
Function
Connection fittings with plug-type connection areused to be able to connect pipes at distributors andlube points quickly and without tools.
Techniscal data
Operating pressure: max. 250 bar*
Temperature rage: -20°C up to +80°C*
Lubricant*: oilfluid greases NLGI cl. 000-00
greases up to NLGI cl. 2
MaterialHousing: brass, nickel-plated
Collet chuck: stainless steel
O ring: NBR
Sealing ring: NBR
Pipe linesPolyamide pipe
High pressure hose (in combination with pipesocket Y1)
TorquesG1/8, M6x1, M8x1, M10x1 5 Nm
G1/4 8 Nm
* depending on the quality of the used polyamide pipe!
Fit
tings
Overview version HX
Fittings
Screw-in plug-type connectors version HX
Disassembly: Push collet chuck in until stop and pull out pipe.
Version with cylindricalthread and with sealing ring
Sealing ring
O-ringLubrication line(plastic pipe)
Edges deburred
Collet chuck(brass, nickel-platedor stainless steel V4A)
Housing
O-ring Lubrication line(plastic pipe)
Edgesdeburred
Collet chuck(brass, nickel-platedor stainless steel V4A)
Housing
Version with taper threadand without sealing ring
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
Screw-in connectors version HX
10-1
-20-0
4Fit
tings
Fittings
Angular screw-in plug-type connectorversion HX - detachable without tools
Article no. Pipe-Ø M L1 L2 L3 AF
10123492 4 R1/8k* 23,5 22,5 14,5 10
10123432 4 M6k* 23,5 22,5 12 10
10123489 4 M8x1k* 23,5 22,5 12 10
10123491 4 M10x1k* 23,5 22,5 14,5 10
10123497 6 R1/8k* 27 26,5 16 11
10123493 6 M6k* 27 26,5 16 11
10123494 6 M8x1k* 27 26,5 16 11
10125449 6 M8x1,25k* 27 26,5 16 11
10123495 6 M10x1k* 27 26,5 16 11* Taper threads can only be sealed by plastic or fluid sealing compounds!
* Taper threads can only be sealed by plastic or fluid sealing compounds!
Pip
e-Ø
L2
AF
ML1
M
AF
Pip
e-Ø
L1
L3
L2
sta
te: 01.1
7E
N
Screw-in plug-type connectors version HX
10-1
-20-0
2Fit
tings
Straight screw-in plug-type connectorversion HX - detachable without tools
Article no. Pipe-Ø M L1 L2 AF
10123604 4 G1/8 23,5 18 10
10123476 4 R1/8k* 23,2 15,2 10
10123609 4 M6 17,5 21,5 10
10123425 4 M6k* 27,5 20,5 10
10123611 4 M8x1 27 21 10
10123473 4 M8x1k* 24,5 17,5 10
10135820 4 M10x1 23 17 10
10123474 4 M10x1k* 23,2 15,2 11
10123605 6 G1/8 27,8 22,5 12
10123482 6 R1/8k* 27 19 12
10123607 6 G1/4 26,8 20,5 12
10125168 6 R1/4k* 30 19 14
10123481 6 M6k* 30 23 12
10135819 6 M8x1 29,5 23,5 12
10123478 6 M8x1k* 30 23 12
10123614 6 M10x1 28,3 22,5 12
10123479 6 M10x1k* 27 19 12
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
Screw-in plug-type connectors version HX
10-1
-20-0
3
Fittings
Fit
tings
* Taper threads can only be sealed by plastic or fluid sealing compounds!
M
AF1
AF2
Pip
e-Ø
L1L2 L
3
Elbow swivel plug-type connectorversion HX - detachable without tools
Article no. Pipe-Ø M L1 L2 L3 AF1 AF2
10123615 4 G1/8 23,5 26,8 21,3 13 13
10123535 4 R1/8k* 23,5 28,3 20,3 13 13
10123619 4 M6 23,5 27,3 21,3 13 13
10123437 4 M6k* 24 27,3 20,3 13 13
10123623 4 M8x1 23,5 27,3 21,3 13 13
10123533 4 M8x1k* 23,5 27,3 20,3 13 13
10135821 4 M10x1 23,5 27,3 21,3 13 13
10123536 4 M10x1k* 23,5 28,3 20,3 13 13
10123543 6 R1/8k* 26 28,5 20,5 13 13
10123616 6 G1/4 26 30 23,5 13 13
10125172 6 R1/4k* 26 32,5 21,5 14 13
10123540 6 M6k* 26 27,5 20,5 13 13
10135822 6 M8x1 25,5 27,3 21,3 13 13
10123541 6 M8x1k* 26 27,5 20,5 13 13
10125450 6 M8x1,25k* 26 27,5 20,5 13 13
10123622 6 M10x1 26 28,5 22,5 13 13
10123542 6 M10x1k* 26 28,5 20,5 13 13
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
Reductions
10-1
-20-0
4Fit
tings
Fittings
Reductions for the installation into metering distributor blocks with plug-type connection,
material: steelArticle no. M1 M2 i1 i2 øD ød L AF
10106099* M10x1 G1/8 7 8,5 14 4,5 17,5 14
10106106* M12x1 G1/8 7 8,5 16 4,5 17,5 17
M1
M2AF
L
øD
ød
i1i2
* Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-20-0
5Fit
tings
Overview version HL
Fittings
Function
Connection fittings with plug-type connection areused to be able to connect pipes at distributors andlube points quickly and without tools.
Technical data
Operating pressure HL: max. 16 bar*
Temperature range: -20°C up to +80°C*
Lubricant*: oilfluid greases NLGI cl. 000-00
greases up to NLGI cl. 2
MaterialHousing: brass, nickel-plated
**plastic
Collet chuck: stainless steel
O ring: NBR
Sealing ring: NBR
Pipe linesPolyamide pipe
TorquesG1/8, M6x1, M8x1, M10x1 5 Nm
G1/4 8 Nm
* depending on the quality of the used polyamide pipe!
Disassembly: Push collet chuck in until stop and pull out pipe.
Version with cylindricalthread and with sealing ring
Sealing ring
O-ringLubrication line(plastic pipe)
Edges deburred
Collet chuck(brass, nickel-platedor stainless steel V4A)
Housing
O-ring Lubrication line(plastic pipe)
Edgesdeburred
Collet chuck(brass, nickel-platedor stainless steel V4A)
Housing
Version with taper threadand without sealing ring
Screw-in plug-type connectors version HL
**
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-1
-20-0
6Fit
tings
Screw-in plug-type connectors version HL
Fittings
Straight plug-type connectorversion HL - detachable without tools
Article no. Pipe-Ø ØD1 L
10123890 4 9 32
10123892 6 11 34
T-plug-type connectorversion HL - detachable without tools
Article no. Pipe-Ø ØD1 L1 L2
10123927 4 9 18 36
10123928 6 11 19,5 39
10123929 8 13 22,5 45
10123936 10 15 25 50
Elbow plug-type connectorversion HL - detachable without tools
Article no. Pipe-Ø ØD1 L1
10123919 6 11 19,5
10123920 8 13 22,5
Pip
e-Ø L
Pip
e-Ø
ØD
1
Pip
e-Ø
Pipe-Ø
L1
L1
ØD1
Pip
e-Ø
Pip
e-Ø
Pipe-Ø
L1
ØD
1
L1
L2
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
Fit
tings
Screw-in plug-type connectors version HL
Fittings
Swivel joint plug-type connector
Article no. Pipe-Ø AF M L1 L2 L3 L4 Ø1
10123947 4 13 G1/8 40,2 19,7 5,5 20,5 13
10123948 6 13 G1/8 41,2 19,7 5,5 21,5 13
10-1
-20-0
7
Pip
e-Ø
Pipe-Ø
AF
L4
L3
L2
L1
M
Ø1
* PV = Preloading valve** Taper thread can only be sealed by plastic or fluid compounds!
AF
L1
M
Pip
e-Ø
L2
Ø1
AF
L1
M
Pip
e-Ø
L2
Ø1
Straight screw-in plug-type connectorversion HL - detachable without tools
Article no. Fig. Pipe-Ø M L1 L2 AF Ø1 PV*
10111353 2 4 R1/8 k** 31 23,5 12 12 with
10111346 2 4 R1/8 k** 31 23,5 12 12 -
10106072 2 4 M10x1 k** 31 23,5 12 12 with
10106063 2 4 M10x1 k** 31 23,5 12 12 -
10106070 2 4 M8x1 k** 31 23,5 12 12 with
10106062 2 4 M8x1 k** 31 23,5 12 12 -
10127817 1 4 G1/4 19,5 13 9 17 -
10107244 1 4 G1/8 19,5 14 9 13,5 -
10134992 1 6 G1/8 23,5 18 11 13,5 -
10127818 1 8 G1/8 26 20,5 13 13 -
10127819 1 8 G1/4 23,5 17 13 17 -
10127821 1 10 G1/4 27,5 21 16 16 -
10107540 1 10 G1/8 28,5 23 16 13,5 -
10127823 1 12 G1/4 30 23,5 18 16 -
Figure 2: Version with taperthread and without sealing ring
Figure 1: Version with cylindricalthread and with sealing ring
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
Fit
tings
Screw-in plug-type connectors version HL
Fittings
Y-plug-type connectorversion HL - detachable without tools
Article no. Pipe-Ø L1 L2 L3 Material housing
10123938 4 29,5 9,5 18,5 brass, nickel-plated
10112040 4 35 11 22 plastic
10123939 6 36 12,5 24,5 brass, nickel-platedP
ipe-Ø
Pip
e-Ø
Pip
e-Ø
L2
L3
L1
10-1
-20-0
8
Elbow swivel plug-type connectorversion HL - detachable without tools
Article no. Fig. Pipe-Ø M L1 L2 L3 AF Ø1 PV*
10111354 2 4 R1/8 k** 20 26 18,6 13 12 with
10111347 2 4 R1/8 k** 20 26 18,6 13 12 -
10106067 2 4 M10x1 k** 20 26 18,6 13 12 with
10106061 2 4 M10x1 k** 20 26 18,6 13 12 -
10106064 2 4 M8x1 k** 20 26 18,6 13 12 with
10106060 2 4 M8x1 k** 20 26 18,6 13 12 -
10107243 1 4 G1/8 20 24,5 19 13 13 -
10127806 1 6 G1/8 21,5 25,2 19,7 13 13 -
10127808 1 8 G1/8 23,5 26,8 21,3 13 13 -
10127809 1 8 G1/4 23,5 29,8 23,3 13 16 -
10127810 1 10 G1/4 26,5 30,6 24,1 16 16 -
10128236 1 10 G1/8 26,5 31 23,5 13 13 -
10127811 1 12 G1/4 29 37,5 31 16 16 -
M
Pip
e-Ø
AF
L3
L2
L1
Ø1M
Pip
e-Ø
AF
L3
L2
L1
Ø1
* PV = Preloading valve** Taper thread can only be sealed by plastic or fluid compounds!
Material housing:brass, nickel-plated
Material housing:plastic
Figure 2: Version with taperthread and without sealing ring
Figure 1: Version with cylindricalthread and with sealing ring
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-1
-30-0
1
Fittings
Fit
tings
Sealing rings, ventilation screw
Flat sealing rings
Article no. Nominal d D H Metric Inch Material
size mm mm mm thread thread
0907 6030 1411 6x10x1 6,7 9,4 1 M6 - Cu
0907 6030 0211 8x11,5x1 8,2 11,4 1 M8 - Cu
0907 6030 0311 10x14x1 10,2 13,4 1 M10 R1/8" Cu
0907 6030 0321 10x14x1 10,2 13,4 1 M10 R1/8" St
0907 6030 2411 12x16x1,5 12,2 15,4 1,5 M12 - Cu
0907 6030 6111 14x17x1,5 14,2 17,9 1,5 - R1/4" Cu
0907 6030 0611 14x18x1,5 14,2 17,9 1,5 M14 - Cu
0907 6030 0621 14x18x1,5 14,2 17,9 1,5 M14 - St
0907 6030 1011 14x18x2 14,2 17,9 2 M14 - Cu
0907 6030 0711 16x20x1,5 16,2 19,9 1,5 M16 - Cu
0907 6030 1711 17x21x1,5 17,2 20,9 1,5 - R3/8" Cu
0907 6030 6211 18x22x1,5 18,2 21,9 1,5 M18 - Cu
0907 6030 6221 18x22x1,5 18,2 21,9 1,5 M18 - St
0907 6030 2111 21x26x1,5 21,2 25,9 1,5 - R1/2" Cu
0907 6030 1511 22x27x1,5 22,2 26,9 1,5 M22 - Cu
Ventilation screw
Article no. M L d AF Material
0802000256 M8x1 13 3 10 steel*
0802000255 M10x1 13 4 12 steel*
0802000257 M12x1 11 5 14 steel*
AF
L
7
ø2
5
M d
H
d
D
* Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-2
-10-0
1
Pipes
Pip
es
Polyamide pipe
Use: for hard or flexible pipesMaterial: polyamide 12 acc. to DIN 16 773
Resistance: against synthetic andmineral oils
Temperature range: -20 °C up to 100 °C
Operating pressure P: see table
Models and Dimensions
flexible model hard modelØD x s R Rmin minP Color Article no. P Color Article no.max max
(mm) (bar) (mm) (bar)
2,5 x 0,45 14 29 transp. 1001 20 050
4,0 x 0,75 20 31 transp. 1001 20 061 20 52 transp. 1001 20 062
4,0 x 0,85 22 35 black 1001 20 041 22 61 black 1001 20 039
4,0 x 0,85 22 35 transp. 1001 20 043
4,0 x 1,0 25 45 transp. 1001 20 058 25 75 transp. 1001 20 059
6,0 x 1,0 30 27 transp. 1001 20 063 30 45 transp. 1001 20 064
6,0 x 1,0 30 27 black 1001 20 068
6,0 x 1,2 35 55 transp. 1001 20 067
6,0 x 1,5 40 89 black 1001 20 101
8,0 x 1,0 40 19 transp. 1001 20 140
8,0 x 1,25 38 42 transp. 1001 20 082
8,0 x 1,5 40 31 transp. 1001 20 081 40 52 transp. 1001 20 080
10 x 1,5 45 45 transp. 1001 20 143
10 x 2,0 50 34 transp. 1001 20 091 50 57 transp. 1001 20 092
Models and dimensions
Pipe Ø D Ø d Ø D Ø dl Article no. Pipe l Article no.
2,5 x 0,5 2,5 1,5 10 0415 0022 6,0 x 1,0 5,0 4,0 15 0415 0040
4,0 x 0,75 4,0 2,5 15 0415 0032 6,0 x 1,2 5,0 3,6 15 0415 0041
4,0 x 0,85 3,8 2,2 10,5 0415 0024 8,0 x 1,0 7,5 6 15 0415 0045
4,0 x 1,0 3,6 2,0 10,5 0415 0030 8,0 x 1,25 7,5 5,3 15 0415 0043
8,0 x 1,5 7,5 5,0 18 0415 0042
Insert sleeves
For reinforcing pipe ends which are assembled withcutting- or clamp ring fittings..
ØD
s
smallest bending radiusRmin
Polyamide pipes
l
ØD
Ød
The length has to be indicated as quantity when being ordered. They are only given out in meters.
Temperaturerange
Capacity
-20 to+20°C
100%
to+40°C
72%
to+50°C
64%
to+60°C
57%
to+70°C
52%
to+80°C
47%
to+90°C
44%
to+100°C
36%
to+30°C
83%
Capacity factor of the permissible operating pressure
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-2
-10-0
2P
ipes
Pipes
Steel and copper pipes
Steel pipeModels and dimensions
Article no. ØD s Rmin
0612020002 4 0,7 5
0678020571 4 1 8
0612020715 6 1,0 11
0612020017 8 1,0 15
0612020262 10 1,0 18
Copper pipeModels and dimensions
Article no. ØD s Rmin
0652020328 4 1,0 8
065180020601 6 1,0 11
0652020600 8 1,0 15
0652020601 10 1,0 18
ØD
sØ
D
s
Steel pipe
Use: for hard pipes
Material: precision steel pipeacc. to DIN 2391/C
Operating pressure P: 200 bar
Length L: 6 m
Copper pipe
Use: for hard pipes
Material: SF-Cu F20DIN 1754Ø4 acc. toDIN 1786Ø6, 8 and 10 acc. to
Operating pressure P: 60 bar
smallest bending radiusRmin
smallest bending radiusRmin
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
Hose type2,5 4 4 6 8 8DN385 45 2 0 255 68 350Per. pressure 8
Code-no. 01 15 10 20 42 32
Nipple/socket Ød (mm) 4 6 8 10
Code-no. 04 06 08 10
Left connection
Model Code-no.
straight with ferrule A0
45° with ferrule B0
90° with ferrule C0
straight with screw sleeve D0
45° with screw sleeve E0
90° with screw sleeve F0
without fittings W0
delivered in bulk . X
Right connectionCode-no. like for "left connection"
Total length L (mm)
Type
12 10 A006 FX06 1500
The order number for the high-pressure hose is put together from allnecessary parameters.
Order example:
D004D006D008D010
F004F006F008F010
Straight pipe socket Pipe socket 90° bent
E004E006E008E010
FX04FX06FX08FX10
Pipe socket 45° bent Fittings enclosed in bulk
B004B006B008B010
C004C006C008C010Nipple 45° bent Nipple 90° bent
A004A006A008A010
W000
Nipple straight
High-pressure hose
Please note:The tolerance of the total lengthis +/-10 mm
Total length L
FA
Z03861-0
0
High-pressure hose
10-2
-10-0
3H
oses
Hoses
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-2
-10-0
4
High-pressure hose and accessories
Accessori
es
Acessories
ØD
1
ØD
2
)High-pressure hose (HDSMaterial: plastic with synthetic
Article no. ØD1 ØD2 per. pressure
1001 20 267 2,5 5,9 385
1001 20 350 4 10 45
1001 20 201 4 8,6 280
1001 20 266 6,5 11,2 255
1001 20 303 7,9 19,1 350
1001 20 907 7,9 14,9 68
* max. 50 m
10 1,5
Ø8
CoilMaterial: Polyethylene, black
Article no.
1001 21 005 ( )Please indicate the length in mm when placing the order
Screw sleeve and pipe socketfor the assembly of a high-pressure hose.
Article no. for HDS Article no.
Screw sleeve ØD1 Pipe socket
1001 21 200 M7x0,75 11 10,8 28 4 8 12 4 10100078 1 steel*
1001 21 197 M7x0,75 10 11 28 2 8 12 4 10100166 1 stainl. steel
1001 21 305 M9x1 14 16 35,8 4 9 17 6,5 10100088 2 steel*
1001 21 347 M9x1 14 16 35,8 4 9 17 6,5 10100176 2 stainl. steel
D1 1D2 D3 L L2 L3 AF Fig. Material
Models for union nut and cutting ring
Screw sleeve
D3
L1
L2L3 AF
D1
D2
30
AF 10
Ø625
61,1
M7x0
,75
AF 12
Ø5,240
67,3
22
Ø8
M9x1
Pipe socketFig. 1
Pipe socket. 2Fig
* Corrosion protection category corresponds to a protection period of up to 720 h red rust resistance
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
L1
L2
ØD
L1
L2
ØD
10
104,8
11
Pipe clamps with fastenings on both sides, acc. to DIN 72 573Material: steel, surface galvanized
Article no. ØD L1 L2 No. of lines
097 257 300 411 4 29 17 1
097 257 300 412 4 33 21 2
097 257 300 413 4 39 27 3
097 257 300 414 4 44 32 4
097 257 300 415 4 48 36 5
097 257 300 416 4 52 40 6
097 257 300 111 6 32 20 1
097 257 300 112 6 38 26 2
097 257 300 113 6 45 33 3
097 257 300 114 6 51 39 4
097 257 300 115 6 57 45 5
097 257 300 116 6 64 52 6
097 257 300 211 8 34 22 1
097 257 300 212 8 42 30 2
097 257 300 213 8 51 39 3
097 257 300 214 8 59 47 4
097 257 300 215 8 68 56 5
097 257 300 216 8 76 64 6
097 257 300 511 10 34 22 1
097 257 300 512 10 44 32 2
097 257 300 513 10 55 43 3
097 257 300 514 10 67 55 4
097 257 300 515 10 77 65 5
097 257 300 516 10 90 78 6
10-2
-20-0
1
Pipe clamps
Accessori
es
Accessories
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-2
-20-0
2
ØDØD
L1L1
L2 L2
10
10
Ø4,8
1
Pipe clamps with fastening on one side, acc. to DIN 72 571Material: steel, surface galvanized
Article no. ØD L1 L2 No. of lines
097 257 100 111 4 18 9 1
097 257 100 211 6 20 10 1
097 257 100 311 8 22 11 1
097 257 100 411 10 23 11 1
097 257 100 112 4 22,5 11 2
097 257 100 212 6 26,5 13 2
097 257 100 312 8 30,5 15 2
097 257 100 412 10 33,5 16 2
Pipe clamps with rubber liningMaterial: steel, galvanized
Article no. Pipe ØD ØD1B S
1001 500 10 6 12 0,5 5,3
1001 500 20 9 12 0,5 5,3
1001 500 30 12 12 0,5 5,3
Cutting screw BM4x8, acc. to DIN 7513Material: steel, surface galvanized
Article no.
090751300212
Pipe clamps
Accessories
Accessori
es
Pip
eøD
S
B
ØD1
Rubber lining
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
Intake sieve Z29 Ø8Mesh size: 0,1mm; filter surface: 2500mm²
Article no.
04700050
Intake sieve Z29 Ø10Mesh size: 0,1mm; filter surface: 2000mm²
Article no.
04700002
10-2
-20-0
3
Suction filter
Accessories
Accessori
es
approx. ø15
ø8
ø38
43
Rubber grommet
2
approx. ø19
ø10
ø35
3
33
Rubber grommet
Intake filter Z27 Ø6Mesh size: 0,58mm; filter surface: 1000mm²
Article no.
04700003
ø6
AF 10
AF 12
56
47
28
3 ø16
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-2
-20-0
4
Oil application brushes
Accessories
Accessori
es
Oil brushapplicationType: AZ-1846 A
Article no.
0802350002
Oil application brushType: AZ-1846 C
Article no.
0802350004
40
AF 10
ø8
ø4
52
6
8
25
ø16
M8x1
AF
13
Nylon ø0,3black corrugated
appro
x. ø
20
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
Grease filter
10-2
-20-0
5
Accessories
Accessori
es
Grease filter with ball valve and throttle
Article no.
408401000101
Grease filter with two pressure gauges
Article no.
408400000103
approx. 194
appro
x. 2
25
Inlet Outlet
Filter cartridge 100 µm
AF 36
ø8
ø8
AF 50
Pressure gaugewithout glycerine0-400 bar
200
300100
4000
200
300100
4000
FA
Z03359-0
0FA
Z03359-0
1
Inlet Outlet
36,5
203,5
R 150
G 3
/8
22,5
AF 36
Filter cartridge100 µm
Throttle
136,4
AF 50
ø12
M16x1
,5
Pipe socket ø12Lwith cutting ringacc. to DIN 2353
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
Control panel
10-2
-20-0
6
Accessories
Accessori
es
Type
Pressure switch: make contact
with thread mount with plug connection
Pressure range without 1-10 10-20 20-50 1-10 10-20 20-50
00 02 03 04 06 07 08Code-no. *
4056 04 04 02 000Order key:
Pressure switch: break contact
with thread mount with plug connection
Pressure range without 1-10 10-20 20-50 1-10 10-20 20-50
00 10 11 12 14 15 16Code-no. *
Pressure switch: changer infinitely adjustable
Pressure range 1-10 10-100 25-250without
00 18 19 20Code-no. *
Ventilation part (without pressure switch):
70Code-no.
Special model
Pipe fittings acc. to DIN 2353, Series L, G1/4
Pipe Ø 6 8 10 12without
00 01 02 03 04Code-no.
Pressure gauge NG 63 with glycerine filling
Pressure range without 0-25 0-60 0-100 0-250 0-400
00 03 04 05 06 07Code-no.
Pressure switchsteplessadjustable
G1/4
FA
Z02597-0
0
ø 63
200
300100
4000
50
Pip
e Ø
appro
x. 1
09
Pressure gauge
AF 30
G1/4
Connection forpressure switch orfor bleeding componentis closed with lock screwand sealing ring at themodel “without”pressure switch
Bleeding componentSpare part no.: 4056G001
19,5
G1/4
AF 17
Bleed screw AF 12Pressure switch withplug connection
G1/4
AF 17
AF 24
Pressure switch withthread mount
Protection capArticle no.:1004010009
G1/4
AF 17
AF 24
* at the model without pressure switch, the connection is closed with a lock screw and sealing ring
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
Plastic reservoir complete with cover and fill-in sieve (4,2 l)
Article no. Model Ø A / Ø B Fill-in sieve Material Effective volume
04570869 Pipe connection Ø A 6 short PE 4,2 l
04570870 Pipe connection Ø A 8 short PE 4,2 l
04570871 Pipe connection Ø A 10 short PE 4,2 l
04570874 Plug-type connection Ø A 8 short PE 4,2 l
04570892 Plug-type connection Ø A 10 short PE 4,2 l
04570907 Hose connection Ø B 10 short PE 4,2 l
04570872 Hose connection Ø B 14,5 short PE 4,2 l
04570941 Pipe connection Ø A 6 long PE 4,2 l
04570942 Pipe connection Ø A 8 long PE 4,2 l
04570943 Pipe connection Ø A 10 long PE 4,2 l
04570944 Plug-type connection Ø A 8 long PE 4,2 l
04570945 Plug-type connection Ø A 10 long PE 4,2 l
04570946 Hose connection Ø B 10 long PE 4,2 l
04570947 Hose connection Ø B 14,5 long PE 4,2 l
10-2
-30-0
1
Zubehör
45
Fill-in sieveshort
Article no.:0800900001
200
Fill-in sievelong
Article no.:0800900022
Ø A
Steckanschluss
160
Ø A
198
190
234
appro
x. 3
8,2
appro
x. 2
83
16,5
Ø 7,5
Ø 66,5
Pipeconnection
130
Ø B
36,5Hose
connection
FA
Z03433-0
2
Plastic reservoir
Accessori
es
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-2
-30-0
2
2
1
4a
69
130
3
230
274
247
285
2,6
appro
x. 9
appro
x. 3
07
Ø 87
(pp
rox.
30)
a
Ø7,5
G 1/4
150
4b
appro
x. 2
4
appro
x. 2
4
Plastic reservoir
Accessories
Accessori
es
Part-list
Position Article no. Description1 10124324 Reservoir with thread G1/4 inside inclusive holder for variation
Article no. 101243502 10124395 Screw top with fill-in sieve and chain3 10126240 Belt4a 10101869 Screw-in connector, straight for variation Article no. 101257494b 10112087 Male stud elbow screw-in connector with thread sealing ring (Article no.
10112089) for variation Article no. 10125752
Plastic reservoir complete with cover and fill-in sieve (7,2 l)
Article no. Connection outlet Fill-in sieve Material Effective volume
10124350 G1/4 inside long, with chain PE 7,2 l
10125749 Ø10, Screw-in connector, straight long, with chain PE 7,2 l
10125752 Ø10, Screw-in connector, 90° long, with chain PE 7,2 l
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-2
-30-0
3
Plastic reservoir complete with cover and sieve (2 l)
Article no. Model Material Volume
04570790 Hose connection PE 2 l
FA
Z03433-0
0
Plastic reservoir BE 2,7 (without cover)
Article no. Model Identification Material Volume
2165150 with 4x thread inlet 01 PA (standard) 2,7 l
2165151 without thread inlet 01 PA (standard) 2,7 l
2165152 with 4x thread inlet 02 PA (UV-stable) 2,7 l
2165153 without thread inlet 02 PA (UV-stable) 2,7 l
Plastic reservoir
Accessories
Accessori
es
12452
Marked withidentificationon the reservoiroutside
ca. 203
4x thread inletwith collar M5x10Article no.: 10102093
8x thread inletwith collar M5x10Article no.: 10102080
192
52
209
M5
151
1108
121
ca. 115,5
80
100
110
146
170
35
22
98
77
12,5
Ø 14,5
Ø 5
,5
Retainer made of steelacc. to FAZ03432-00 hasto be ordered separately.Article no.: 0800800751
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
Steel reservoir BE12; BE35; BE100
Article no. Designation Volume
04570842 BE 12 16 l
04570843 BE 35 40 l
04570846 BE 100 109 l
Steel reservoir BE6; BE16; BE20
Article no. Designation Volume
04570725 BE 6 6 l
04570879 BE 16 16 l
04570880 BE 20 20 l 10-2
-30-0
4
Steel reservoir
Accessori
es
Accessories
X
View X
G H
FE
AB
C
JK
Hexagon screw
Reservoir cover
Sealing
Oil levelindication
Oil drainscrewG1/2
D
260 310 11 275 281 220 298 50 76310
420 470 11 400 407 220 298 50 76310
650 700 11 530 538 310 388 50 127400
Designation A B C D E F G J KH
BE 12
BE 35
BE 100
X
View X
G
Oil drain screwM22x1,5
Sealing ring
Sealing
Reservoir cover
Cylinder head cap screw
H
ø9
CBA
F11
,5ED
320 300 270 210 140 35 140 60
480 455 430 243 170 42 176 60
590 570 550 240 170 42 186 275
Designation A B C D E F G H
BE 6
BE 16
BE 20
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-2
-30-0
5
FA
Z00703-0
2
Aluminium casted reservoir
Accessori
es
Accessories
X
View Xø6,4
8,5
140
Cylinder head cap screw
Reservoir cover
Sealing
Sealingring
Oil drain screwM22x1,5
29
170
45
9
3,5
220
250
Aluminium casted reservoir BE 3 Al
Article no. Designation Material Volume
04570724 BE 3 Al Aluminium casted 3 l
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-2
-30-0
6
Aluminum oil reservoir TR 13 Alwithout oil collecting rim
Article no. Designation Volume
04570702 TR 13 Al 11,5 l
Aluminum oil reservoir TR 30 Al; TR 44 Al; TR 70 Alwithout oil collecting rim
Article no. Designation Volume
04570700 TR 30 Al 27 l
04570703 TR 44 Al 40 l
04570881 TR 70 Al 63 l
Accessories
Aluminum oil reservoir
without oil collecting rim
Accessori
es
M8
114
250
95M6
Hexagon bolt
Reservoir lid
Flat sealing
Sealing ring
Oil drainscrewG 3/8
295
310
4213
12
102
170
225
240
Oil level indicationon request
A
BL
Q
C
M
DF
Oil drainscrewG 1/2
Reservoir feeton request
Hexagon bolt
Reservoir lid
Round cordsealing
Oil levelindicationon request
P
GH
K
E
J
N
O
Sealing ring
FA
Z00857-0
0
490 449 326 366 310 Ø11 275 340 299 M8 M10 176 216 10 5150
515 485 341 381 400 Ø11 305 415 385 M8 M10 241 281 10 5150
605 575 422,5 462,5 450 Ø11 355 465 435 M8 M10 282,5 322,5 10 5150
Designation A B C D E F G J K L M N O P QH
TR 30 Al
TR 44 Al
TR 70 Al
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
10-2
-30-0
7
Aluminum oil reservoir T 13 Alwith oil collecting rim
Article no. Designation Volume
04570708 T 13 Al 11,5 l
Aluminum oil reservoir TR 44 Al; TR 70 Alwith oil collecting rim
Article no. Designation Volume
04570704 T 44 Al 40 l
04570810 T 70 Al 63 l
Accessories
Aluminum oil reservoir
with oil collecting rim
Accessori
es
Hexagon bolt
Reservoir lid
Round cordsealing
Oil level indicationon request
Sealing ring
Oil drainscrewG 1/2
M8188 118
M695295330
4260
10
225260
Sealing ring
Oil drainscrewG 1/2
Oil levelindicationon request
Hexagon bolt
Reservoir cover
Round sealingcord
J
Feet on request
SK
N
O
P
BA
L
Q
M
D
E
GH
R
F
Position of oillevel indication
T 44 Al leftT 70 Al left
FA
Z01746-0
0
C
543 485 341 381 421 Ø11 307 443 385 M8 M10 241 281 321 5 10 400150
650 575 422,5 462,5 502,5 Ø11 357 507 435 M8 M10 282,5 322,5 362,5 5 10 450150
Designation A B C D E F G J K L M N O P Q R SH
T 44 Al
T 70 Al
Fittings and Accessories
sta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
Subject to alterations!© BEKA 201 All !8 rights reserved
1090200402
10-2
-30-0
8
Accessories
Accessori
es
Fittings and Accessoriessta
te: 06.1
8E
N
BAIER + KÖPPEL GmbH + Co. KG BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.deD-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: [email protected]
© BEKA 201 All !8 rights reserved
1090200402
Subject to alterations!
PO BOX 13 2091253 PEGNITZ/BAVARIAGERMANY
BEETHOVENSTRASSE 1491257 PEGNITZ/BAVARIAGERMANY
BAIER + KÖPPEL GmbH + Co. KGe-mail [email protected] www.beka-lube.de
fon +49 9241 729-0fax +49 9241 729-50
MAX MINING FLUILUB FOODLINE
WIND WOOD CLEARTRONIC TRON
© BEKA 2018 All rights reserved!
BEKA International
AgenciesBEKA Subsidiary
Partner
BEKA Rep Office
CANADABEKA LUBE- Products Inc.2830 Argentia Road, Unit 9Mississauga, , L5N 8G4ONfon +1 905 821 10 50fax +1 905 858 05 97e-mail [email protected]
BELGIUMBEKA LUBE N.V.S.A.Demerstraat 32
3200 AarschotBEfon +32 16 64 09 26fax +32 16 64 05 48e-mail [email protected]
AUSTRIABEKA-Lube GmbHRottweg 665020 Salzburgfon +43 662 43 84 40fax +43 662 43 84 403e-mail [email protected]
ITALYBEKALUBE s.r.l.Via Rossi 152I-20862 Arcore (MB)fon +39 039 61 80 088fax +39 039 61 75 23e-mail [email protected]
FRANCEBEKALUBE FRANCE4, bis Rue de l’Artisanat89100 Paronfon +33 386 83 39 06
65 52 24fax +33 386e-mail [email protected]
SPAINBEKA LUBE IBÉRICA- S.L.U.C/Albasanz 14 Bis, 2ª J28037 Madridfon +34 91 440 26 56fax +34 810 520 178e-mail [email protected]
NETHERLANDSBEKA NEDERLAND B.V.Wagenmakerij 114762 ZevenbergenAVfon +31 168 37 15 38fax +31 168 33 83 29e-mail [email protected]
TURKEYBEKAMAKS MAKINA SANAYI TICARETve
. . Kucukyali MerkeziLTD STI TicaretB Blok No. 7 Girne Mah.34852 Maltepe / Istanbulfon +90 216 367 34 00fax +90 216 367 33 85e-mail [email protected]
ALGERIABEKA LUBE ALGERIEZone d'activité n°2525140 Ain-smara / Constantinefon +213 31 97 51 00fax +213 31 97 51 12e-mail [email protected]
ArgentiniaAustraliaBelarusBosniaBrazilBulgariaCroatiaCzechiaDenmarkEstonia
FinlandGreat BritainGreeceHong KongHungariaIndiaIndonesiaIcelandIrelandLatvia
LithuaniaLuxemburgMalaysiaNew ZealandNorwayPolandPortugalRomaniaRussiaSerbia
SlovakiaSloveniaSouth AfricaSwedenSwitzerlandUkraineand others
USABEKAWORLD LPP.O. Box 234258 Sonwil DriveBuffalo, NY 14225fon +1 716 685 3717fax +1 715 685 3634e-mail [email protected]
CHINABEKA Lubrication Systems Co. Ltd.
, lRoom 1803 Bui ding 1 Sandhill Plaza,No. 2290 Zuchongzhi RoadPudong New District, Shanghai 201210fon +86 21 6 46 29 881fax +86 21 61 46 29 89e-mail s @bekaworld.cnales
East Tsanhair Company Ltd.7A Building, Medicine Valley No.1,No.9 Tianfu Street, Bio-Medicine Park,Zhongguancun Science Park,Daxing District, Beijing 102600fon +86 10 83 681 526fax +86 10 83 681 520e-mail [email protected]
JAPANBEKA .Japan Co., LtdHonmachi 2-4-15, Yao-ShiOsaka Pref 581-0003.fon +81 72 923 14 22fax +81 72 923 43 95e-mail [email protected]
KOREABAIER + KÖPPEL Korea Liaison OfficeAA-1406, Sunyudo Woolim Lions Valley149, e ro,Yangpy ong-
105Yeongdeungpo-gu, Seoul (150- )fon +82 2 20 38 09 88fax +82 2 20 38 89 34e-mail [email protected]
BEKA AHWON326-1 Danggung DongGunpo Si Kyungki Do KoreaPostal Code 435-822fon +82 31 451 06 28fax +82 31 451 09 74e-mail [email protected]
SINGAPOREBEKAWORLD SINGAPORE PTE. LTD.51 Changi Business Park Central 2#07-10 The SignatureSingapore 486066fon +65 65 38 94 18fax +65 65 38 94 28e-mail [email protected]