five fast & fun halloween projects

HALLOWEEN PROJECTS2021

©2021 CM Group Holdings, Inc. | CM Group Holdings Brands: Creative Memories® | US 0821

Five Fast & Fun Halloween Projects• Full Moon Fun Paper Pack• 12x12 Orange Shimmer Cardstock• Full Moon Fun Stickers• Tape Runner• Repositionable Tape Runner• Foam Squares

• 12-inch Trimmer• Scoring Blade• 3-in-1 Bevel Tag Punch• Ghost Chain Border Maker Cartridge• Original Border Maker System

INGREDIENTS

• To create the tag base, cut a 2-1/2'' x 4-1/4'' paper using the 12-inch Trimmer. Then use the 3-in-1 Bevel Tag Punch to punch the tag.

• To create a gift card tag, cut a 5-1/4'' x 4-1/4'' paper using the 12-inch Trimmer. Then cut a 45-degree angle at 1-1/2'' from the bottom on the 5-1/4'' side to 2-3/4''

and stop to leave 2-1/2'' at the top. With the remaining 2-1/2'' tall piece, punch with the 3-in-1 Bevel Tag Punch. Then using the 12-inch Trimmer with the Scoring Blade, score at 2-1/2'' and at 5''. Fold to create a gift tag pocket.

• Adhere stickers with Foam Squares for added dimension.

PROJECT 1: TAG



• To create a wrapped chocolate miniature, cut a 1-1/2'' x 3'' piece of paper.

• Adhere the paper to a chocolate with the Tape Runner, attaching the bottom of the chocolate to the paper and wrapping it around the chocolate. Use additional adhesive to adhere the end.

• To create a wrapped 3'' x 3'' sticky note, cut a 3-1/4'' x 8-1/2'' paper and score at 2-1/8'', 2-5/8'', 5-7/8'' and 6-3/8''. Fold on the scored lines and attach to base of the sticky note.

• Adhere the top pieces together with stickers and Foam Squares.

PROJECT 2: WRAPPED CHOCOLATES AND STICKY NOTES

• Use a lunch-sized paper bag that is 5-1/2'' x 8''.

• To create the base to attach to the bag, cut a 5-1/4' x 7'' piece of pumpkin orange pumpkin seeds paper with the 12-inch Trimmer.

• Cut two 1'' x 5-1/4'' strips out of pumpkins paper for the top and bottom.

• Cut two 1/2'' x 5-1/4'' strips from black cauldron night sky paper.

• Adhere the base first and then place the two 1'' strips on the top and bottom over the base sheet. Then add the 1/2'' strips between to create borders between the 1'' strip and the base (under the top strip and above the bottom strip).

• Adhere stickers with Foam Squares for added dimension.

PROJECT 3: BAG



• To create the card base, cut an 8-1/2'' x 5-1/2'' piece of Orange Shimmer Cardstock with the 12-inch Trimmer. Then use the Scoring Blade to score along the long edge at 4-1/2'' and fold in half.

• Cut a 4'' x 5-1/4'' piece of black cauldron night sky paper and adhere it to the front of the card.

• Punch a border using the Ghost Chain Border Maker Cartridge with the Original Border Maker System and trim it at 4'' to create three border pieces. Attach the cut-out ghosts borders with Repositionable Tape Runner as shown. Trim a border sticker to two 4" pieces and alternate in between the cut-out ghosts borders.

• Adhere stickers to the card with Foam Squares for added dimension.

PROJECT 5: CARD

• Use a sheet of Orange Shimmer Cardstock as the base for this layout.

• Score a paper at 3'' using the 12-inch Trimmer and the Scoring Blade.

• Fold the paper and attach it to the Orange Shimmer Cardstock with the two designs shown and 1'' of cardstock shown on each end.

• Add a pumpkins border from the gridded Halloween paper to the seam.

• Add photos and journal. • Adhere stickers with Foam Squares

for added dimension.

PROJECT 4: FOLD-OVER PAGE

five fast & fun halloween projects

Documents