fixez | smartphone and tablet replacement parts - …...securing the lcd & touch screen...

•

•

•

•

•

•

•

5-0013 Small T5 Torx Screwdriver

5-0019 Plastic Opening Tools

5-0022 Nylon Spudger

5-0458 Anti-Static Wrist Strap

5-1370 Fine Tip Curved Tweezers

5-1387 Precision Knife Set

Heat Gun/Blow Dryer

Motorola Moto GDISASSEMBLE GUIDE

of 7

Recommended Tools

http://www.fixez.com/

This guide will show you how to completely disassemble the Motorola Moto G smartphone, assisting in making the DIY repair of the device simple, and safe. Following the comprehensive steps we have provided will help you quickly replace not only a broken Moto G display assembly, but also any other internal components that may have become faulty or damaged.

You can find a full archive of fixez.com disassemble guides and HD repair videos, for numerous makes and models of smartphones and tablets, by visiting http://www.fixez.com.

https://www.facebook.com/fixez.com

https://twitter.com/fixezdotcom

https://plus.google.com/u/0/+Fixez/posts

http://www.pinterest.com/fixezdotcom/

https://www.youtube.com/user/fixezdotcom

Motorola Moto G – Disassemble Guide

of 7http://www.fixez.com/

Near the dock connector toward the bottom of the Moto G, insert the precision knife in the seam between the front housing/frame and rear case.

This is a very tight seam so the use of the precision knife is advised as oppose to the plastic opening tool.

1.

Once you have the first clip free, you can continue the separation with your plastic opening tool. Work your way around the entire smartphone, gently freeing the clips until the rear case is removed.

2.

Next, locate and remove the fourteen T5 torx screws that secure the protective cover/rear housing to the front housing/frame (marked with orange circles).

You can now remove the protective cover/rear housing from the Moto G (make sure to keep track of the power & volume buttons).

3.








Use the nylon spudger to gently pry up and disconnect the battery cable from the motherboard. With the flat side of the spudger carefully get under the battery, lift it up from the securing adhesive and then remove it from the Moto G.

4.

The front-facing camera should now be loose and easy to lift out of the Moto G with the fine tip curved tweezers.

5.

Next, use the fine tip curved tweezers to lift the blue protective cover up and access the connection for the display assembly (LCD & touch screen).

6.

Battery

Front-Facing Camera








Now, locate the locking socket for the display assembly ribbon cable. To release the cable, lift the opposite side of the locking socket 90 degrees. You can nowdisconnect the ribbon cable.

7.

The ribbon cable for the display assembly is secured to the motherboard with adhesive. Utilize the heat gun to soften the adhesive, making it easier to pry up the cable from the motherboard.

8.

Next, utilize the flat side of the nylon spudger tocarefully remove the motherboard. Gently work the spudger between the motherboard and the display assembly/front housing to remove it from the Moto G.

9.








The earpiece speaker is secured in its location with a small amount of adhesive. Use your fine tip curved tweezers to easily remove it from the Motorola smartphone.

10.

At this time, the display assembly (LCD & touch screen) is fused together and cannot be separated. It is secured to the front housing/frame of the smartphone with a generous amount of adhesive that will require heat and patience to separate.

This procedure is only recommended on a Moto G with a damaged screen that requires replacement.

Use the heat gun to begin warming up the adhesive securing the LCD & touch screen digitizer assembly to the smartphone’s front housing/frame.

11.

To begin separation of the display assembly from the Moto G front housing/frame, securely grip the sides of the smartphone and slip the precision knife under the display assembly.

12.

Earpiece Speaker

Display Assembly (LCD & Touch Screen Digitizer)








Now, utilizing the plastic opening tool continue around the entire perimeter of the Moto G until the display assembly is completely separated.

13.






Breakdown



1. Motorola Moto G Back Cover2. Motorola Moto G Rear Housing/Protective Cover3. Motorola Moto G Frame/Front Housing4. Motorola Moto G Display Assembly (LCD & Touch Screen)5. Motorola Moto G Motherboard6. Motorola Moto G Battery7 Motorola Moto G Earpiece Speaker8. Motorola Moto G Front-Facing Camera9. Motorola Moto G Volume Button10. Motorola Moto G Power Button

1 2 3 4

5

6

7 8

910

Notice/Warning:FIXEZ.COM DOES NOT ACCEPT ANY LIABILITY FOR DAMAGE, OR INJURY CAUSED, WHILE YOU AREFOLLOWING OUR DISASSEMBLE GUIDES. WE MAKE NO REPRESENTATIONS, WARRANTIES, ORCONDITIONS OF ANY KIND, EXPRESS OR IMPLIED. UTILIZING THESE GUIDES TO HELP ASSIST YOU INREPAIRING YOUR MOBILE DEVICES WILL VOID YOUR WARRANTY. FIXEZ.COM STRICTLY PROHIBITSALTERING OR MODIFYING OUR DISASSEMBLE GUIDES FOR COMMERCIAL USE, REPRODUCTION, ORPUBLICATION.






fixez | smartphone and tablet replacement parts - …...securing the lcd & touch screen...

Documents