flame hardened bedways - mihir lathemihirlathe.com/media/wysiwyg/catalog_pdf/mihir_180.pdf · flame...
TRANSCRIPT
Ind
ia's
Lar
ges
t Se
llin
g A
LL G
EAR
Lath
e
ALL GEAR LATHE
FLAME HARDENED BEDWAYS
n CM r 502
n CM r 502
Factory : S.R. No. 34, Plot No. 7, Opp. Shantidham Gate, SHAPAR (Veraval), Dist. Rajkot-360 024.Phone : 02827-23245 / 0281-2311880 Cell : +91 98242 13207 / 99241 13207e-mail: [email protected] / [email protected] l web : www.mihirlathe.com
Manufactured by :
Ghanshyam Machine ToolsSHN YA A
H M
G
Special FeaturesS Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and
Straight Edge.
S Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made
from alloy steel.
S Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
S HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened & Ground
S Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.
S Instruction Manual as per indian Standard IS - 1878 (part -I) 1971.
S COLOUR OPTION :- Oasis Green / Blue & White (Two Tone)
Accuracy Tested as per
IS 1878-1971 Standard
ALL GEAR LATHE
TECHNICAL SPECIFICATION
Standard Accessories
Change Gear Set
(Inch & mm)
Chuck Plate
Tool Post Key
Center Adaptor
Dead Centre (2 Nos.)
Four Position Tool Post
Thread Dial Indicator
Motor Stand
Motor Pully
Extra Accessories
True Chuck
Dog Chuck
Driving Plate
Face Plate
Steady Rest
Follow Rest
Quich Change Tool Post
Rear Tool Post
Splesh Guard
Revolving Centre
Electric Equipment
Motor & Swich
Two Speed Motor
Variable Speed Motor
Brack Motor
Coolant Fittings
Machine Lamp
Control Panel Bord
Optional Attachment
Taper Turning Attachment
Grinding Attachment
Key Way Attachment
Milling Attachment
MODEL MIHIR-180x1000 MIHIR-180x1200 MIHIR-180x1500
BED :
Bed Type 2 V & 2 Flat 2V & 2 Flat 2V-2 Flat
Bed Length 1800 MM 2100 MM 2400 MM
Bed Width 240 MM 240 MM 240 MM
Gap Length 100 MM 100 MM 100 MM
Gap Length in front of face plate 110 MM 110 MM 110 MM
CAPACITY:
Height of Centre 180 MM 180 MM 180 MM
Swing Over Bed 360 MM 360 MM 360 MM
Swing Over Cross slide 210 MM 210 MM 210 MM
Swinging Gap 520 MM 520 MM 520 MM
Admit Between Centre 1000 MM 1200 MM 1500 MM
Movement of Cross Slide 175 MM 175 MM 175 MM
Movement of Compound Slide 100 MM 100 MM 100 MM
MAIN SPINDLE:
Spindle Nose A2 -4 A2-4 A2-4
Taper Bore in Spindle Sleeve MT - 3 MT - 3 MT - 3
Spindle Bore Ø 40 MM Ø 40 MM Ø 40 MM
TAIL STOCK :
Quil Dia 41.5 MM 41.5 MM 41.5 MM
Taper in Quill MT - 3 MT - 3 MT - 3
Quill Travel 150 MM 150 MM 150 MM
SPEED :
No. of Spindle Speed 8 8 8
RPM (Low / High)1440RPM Motor 45-1200 45-1200 45-1200
RPM (Low / High) 720 RPM Motor 22 - 600 22 - 600 22 - 600
THREADS:
Metric Thread 20 (0.5 To 7.5 MM) 20 (0.5 To 7.5 MM) 20 (0.5 To 7.5 MM)
English Thread 36 (4 To 60 TPI) 36 (4 To 60 TPI) 36 (4 To 60 TPI)
Module Thread 13 (1 To 4) 13 (1 To 4) 13 (1 To 4)
Diametrial Pitch 12 (6 To 24) 12 (6 To 24) 12 (6 To 24)
Lead Screw 25 MM × 4 TPI 25 MM × 4 TPI 32 MM x 4 TPI
ELECTRIC MOTOR
Main Power 1.5 KW / 2 HP 1.5 KW / 2 HP 1.5 KW / 2 HP
MOTOR DRIVE:
‘V’ Belt B-30 B-30 B-30
GENERAL:
Weight (Approx.) 800 kg 900 kg 1000 kg
Floor Space Occupied 2400 X 540 X 1200 2700 X 540 X 1200 3000 X 540 X 1200
Note : * Above mentioned Informations are Subject to Charge Because of Product Improvement. * All The Parts shown in photo are not Included in Standard Accessories.