flexi packet data link
TRANSCRIPT
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 1/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
1
Contents
1 Data Link 3
1.1 E1/T1 Channel Map 3
1.2 E1/T1 Ports 10
1.3 STM MUX Demux (loopback) 18
1.4 STM Trace Message 19
1.5 Copy 20
1.6 Ring Routing Configuration 21
Data Link
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 2/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks2
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 3/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
3
1 Data Link
1.1 E1/T1 Channel Map
Check the Radio link Summary, to know exactly the available bandwidth on air. In thefollowing example the bandwidth for E1 traffic is 8 E1.
Fig. 1 Summary Configuration Example
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 4/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks4
From the GUI interface, select:
Link configuration>Data Link>E1/T1 Channel Map
Click on "Update" pushbutton, in order to reset the Channel Map view area.
Fig. 2 E1/T1 Channel Map 1
TIP
The tributaries ports are with the ID EXn to select the I/O expansion module or MAn
to select the tributaries on the master modulo.
En means Radio East Side
Wn means Radio West Side
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 5/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
5
Fig. 3 E1/T1 Channel Map 2
Once updating the window, the system shows the current possibilities for the E1traffic configuration.
There are two ways to proceed:
• Custom (default): to edit directly the cross connections
• Channel Mapping Type: using different Template solutions
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 6/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks6
1.1.1 Custom
Type directly the cross connection. In a 1+1 configuration all the cross connection on
air are indicate with the letter E..n, as East
Fig. 4 E1/T1 Channel Map Editing
TIPCheck the cross connection syntax in the system overview chapter referring the crossconnections. The separation between the time slot column and the tributary columnmust be with the "coma" (,).
After the typing, click on "Update"
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 7/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
7
Fig. 5 E1/T1 Channel MAP example of Invalid mapping
In case the selection is not completed the system indicates the "Invalid Mappings"and the "Incomplete Mappings" advices
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 8/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks8
The Update with a correct sequence will give the following result:
Fig. 6 E1/T1 Channel Map Valid Mapping example
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 9/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.2 Mapping Type
In case of Channel Mapping Type with Templates, select one of the followingpresented in the pop up window
Fig. 7 E1/T1 Channel Map Template Example
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 10/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks10
1.2 E1/T1 Ports
Once created the channel mappings, in order to run a 2Mbs traffic test, connect onemapped tributary port to a traffic test generator in one IDU, and prepare a loop on theremote IDU port. In case is not available a hardware loop software loops arepossible.
In the GUI interface, select:
Link configuration>Data Link>E1/T1 Ports
Fig. 8 E1/T1 Configurations
Channel section Checkbox – Select channel(s) to apply configurations. Thenumber of available channels is dependent on the equipment configuration. Anychannels that appear in grey color are inactive.
• MA indicates that the channel is a Master IO card front panel port.
• EX indicates that the channel is an Expansion IO card front panel port.
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 11/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1 E1/T1 Single Port Loopback
Purpose of this test is to verify the End to End link connectivity and the proper E1mapping to ensure the payload connectivity between both end terminal stations
Fig. 9
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 12/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks12
Two loopbacks are available:
• Far
• Near
The Far loopback example is shown in the following
2 Mbs
generator
IDU1 IDU2
E2,MA2 E2-MA2
E1/T1 Ports
Far loopback
Fig. 10 Loopback example
Select the Physical Channel, click on Apply Setting; scroll down the left side bar;select "Far"in the loopback setting and then, click on "Update".
1
2
3
4
Fig. 11 Single loopback setting example
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 13/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
13
The Near loopback is a port test. See the following
2 Mbsgenerator
IDU1 IDU2
E2-
,MA2 E2
-
,MA2
E1/T1 Ports
Loopback = Near
Near loopback
Fig. 12 Near loopback Example
Fig. 13 Near loopback example
TIPLoopback field = "Normal"; means no loop on that port
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 14/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks14
1.2.2 SDH-PDH Interaction
In one station the SDH generator has to be connected. The IDUs involved contain theSTM1 mini IO micro module.
Fig. 14 Test set Example
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 15/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
15
The following example represents how to connect traffic from SDH to PDH
SDH
Generator
CH 1.1.1-
IDU1 IDU2
-
STM1 PDHSTM1
Fig. 15 SDH test set Example
IDU 1, connected to the SDH generator, has the radio time slot E1 mapped withSTM1 1.1.1.
IDU 2 has the radio time slot E1 mapped with a PDH port."
IDU1 IDU2
Fig. 16 Channel Mapping Example
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 16/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks16
Another possibility is to drop the 2Mbs into SDH in the same station using the IDU asmultiplexer
SDH
Generator
CH-1.1.2
IDU1 IDU2
-
STM1
PDH
Fig. 17 SDH Test bed example
The cross connection on Channel Map will be as follows:
Fig. 18
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 17/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
17
1.2.3 Only SDH traffic
Flexi Hybrid can be configured as a pure SDH traffic radio link regenerator.
The SDH frame (STM1) is transparently passed through the Radio Link.
In this case the Radio link has no Ethernet or PDH traffic.
SDH
Generator -
IDU1 IDU2
-
STM1 STM1 SDH
Fig. 19 SDH Traffic only example
In Link configuration the IDU operational mode has to be set as follows on bothradios: 28.128-1s which means: 28 MHz bandwidth space, 128 QAM modulation, 1STM1 data traffic.
Fig. 20 Link configuration IDU Operational Mode example for STM1
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 18/22
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 19/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
19
1.4 STM Trace Message
STM Trace Message screen is available only if the Enhanced Master IO Card andthe Mini IO module are installed in the equipment (STM-1 Optical or STM-1 ElectricalMini IO).
The menu window is presented in the following:
J0 byte
J1 byte
J2 byte
Fig. 23 STM Trace Message
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 20/22
Data Link
FT42729EN02GLA2
© 2010 Nokia Siemens Networks20
1.5 Copy
It is possible to copy the cross connectionsOnce editing the cross connections select all of them with the mouse and clicks theright button. Choose "Copy".
Select the other Radio.
In the same menu select again the data and with right mouse, choose "Paste".
Radio 1
Radio 2
Fig. 24 Channel Map Copy example
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 21/22
Data Link
FT42729EN02GLA2 © 2010 Nokia Siemens Networks
21
1.6 Ring Routing Configuration
Fig. 25
This Menu is available in case of east-west configuration.
The user isset the restoring mode (automatic or manual) in case of the RingConfiguration. If the automatic mode has been selected it will be possible to set therestore delay.
The parameters listed in this page are:
• Ring Routing Mode – Automatic/Manual.
• Restore Delay – Enter the suitable delay (If the routing mode is Automatic).
• Force Protection Switch – By pressing Start the forcing operation of the RingProtection Switch is activated (the Standby path becomes Active). By pressing
Stop the forcing command is released.
8/10/2019 Flexi Packet Data Link
http://slidepdf.com/reader/full/flexi-packet-data-link 22/22
Data Link