flint group a re-introduction rich emmerling technical manager flint group flexographic products
TRANSCRIPT
![Page 1: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/1.jpg)
Flint GroupA re-introduction
Rich EmmerlingTechnical ManagerFlint Group Flexographic Products
![Page 2: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/2.jpg)
2
A History
?
N
CQIB
Inks Chemicals
B&T
BASF
nternational Corporation
Temple Inks
Morrison Inks
News/Publication
![Page 3: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/3.jpg)
3
Flint Group Divisions
Print Media
Pigments
Packaging & Narrow Web
PlatesSleevesPlate Making Equipment
Offset InksBlanketsPressroom ChemicalsNews InksCommercial Printing
PigmentsCoatings
Flexo InksGravure InksOffset InksPackaging
![Page 4: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/4.jpg)
4
Quick Facts
• 140 Facilities, in over 40 countries worldwide• ~ 7,500 People• Revenues of $3.5 billion in 2009
100% derived from sales to the printing and packaging industry #1 or #2 in all markets served
• Flint Group was formed from the merger of XSYS Print Solutions and Flint Ink in 2005
• XSYS was the combined companies of ANI and BASF Printing Products (2004)
• Flint Group acquired Day International/Rotec in 2007
![Page 5: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/5.jpg)
5
North American Plates Facility
North American Technical & Training Center In Charlotte, NC with nyloflex® FV flowliner, drier, top lift exposure unit, image analysis systems, and ablative lasers.
Team of experienced Technical Service people for plates set up and equipment installation & training.
![Page 6: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/6.jpg)
6
Product Portfolio
Flexo Plates
Letterpress Plates
Equipment &
Solvents
Sleeves, Service &
More!
![Page 7: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/7.jpg)
Differentiate to ThriveOffer something different to your customers
Rich EmmerlingTechnical ManagerFlint Group Flexographic Products
![Page 8: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/8.jpg)
8
Surviving in a challenging economy requires differentiating yourself in the market. Offering new products to your customers – ones that address their need for quality and value – set you apart from your competition.
In the spirit of differentiation, Flint Group is introducing two new products for the corrugated market, and a new, thinner plate that will address both quality and sustainability concerns.
![Page 9: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/9.jpg)
9
Corrugated Industry Focus
• For too long it’s been a " me too" world for corrugated post print plate products
• Everyone was after the formidable leader to duplicate the performance of the market leading product
• Each supplier has developed a product that is essentially similar to that market leader
• But now it’s time to do something different . . .
• Flint Group has refocused its product development on the corrugated post print market to introduce new products that take the print performance for corrugated to new levels
![Page 10: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/10.jpg)
10
![Page 11: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/11.jpg)
11
![Page 12: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/12.jpg)
12
nyloflex® FAC
• The premium, high quality plate for corrugated post print
• Available in digital and conventional• Wide market share globally• Proven high quality printing plate• Conventional up to 52x80" • 32 Shore A
![Page 13: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/13.jpg)
13
nyloflex® FCC
• The " economic" alternative to FAC• Durable, ideal for line and halftone
work on a variety of boards • Very good ink transfer and solids
coverage, even on coarse liners• 32 Shore A
![Page 14: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/14.jpg)
14
Requirements of Corrugated Post Print
• Print Quality Dealing with the trend to lower liner quality Lower board quality demands a plate that will work with
low impression to avoid compression of flute The market needs a plate that will provide excellent
solids coverage, print clean, open reverses, and minimize dot gain
Can these requirements be filled with one plate type? What would be the effect of using a harder plate? Would a softer plate be able to reduce impression while
still providing smooth ink lay down and still print with low level of dot gain?
![Page 15: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/15.jpg)
15
Introducing
• New products for the corrugated post print market
FSC – a soft durometer (25 Shore A) plate for excellent solids coverage with fine, detailed reverse and positive printing on A-, B-, C-Flute, rough surfaces, recycled, and low quality liners
FHC – a higher durometer (38 Shore A) product for high end post print applications on C-, E-, Micro-Flute coated and uncoated liners
![Page 16: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/16.jpg)
16
nyloflex® FSC – High Quality Print
Conventional and Digital • Excellent solids coverage, particularly
on low cost liners• Very good ink transfer • Deep, sharp reverses, for excellent
print results• Superior performance in line work• Also suitable for halftone work
![Page 17: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/17.jpg)
17
nyloflex® FSC Digital – Cost Efficient & Reliable
Standard solid plate processing• Superior durability and long lifetime,
no chipping• Processes in standard equipment• Established, proven technology • Easy handling – fast processing• Reduced plate cleaning • Excellent plate thickness tolerance
![Page 18: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/18.jpg)
18
nyloflex® FHC
Conventional and Digital• Excellent dot reproduction• Fine line and reverse printing• Excellent ink transfer• Wide exposure latitude• Longer press life• Excellent impression latitude
![Page 19: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/19.jpg)
19
Print Trials
• Two separate print trials were conducted with all products
• Trials were done at Clemson University on the Bobst press and at Fox Valley Technical College on their Grant International Workhorse press
![Page 20: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/20.jpg)
20
Print Results – Hard Plate/Coated Board
Tonal Values Coated Board (65 lpi)
0%
25%
50%
75%
100%
0%
25
%
50
%
75
%
10
0%
Data
Pri
nt
FAC D
FHC D
linear
![Page 21: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/21.jpg)
21
Hard Plate – Coated/Dot Gain
Standard
Hard
Standard
Hard
![Page 22: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/22.jpg)
22
Hard Plate – Coated/Solid
StandardHard
![Page 23: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/23.jpg)
23
Hard Plate/Reverse Print Coated
StandardHard
![Page 24: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/24.jpg)
24
Print Results – Soft Plate/Coated Board
Tonal Values Coated Board (65 lpi)
0%
25%
50%
75%
100%
0%
25
%
50
%
75
%
10
0%
Data
Pri
nt
FAC
FSC
linear
![Page 25: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/25.jpg)
25
Soft Plate – Coated/Dot Gain
Soft
Standard
Soft
Standard
![Page 26: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/26.jpg)
26
Soft Plate – Coated/Solid
Standard Soft
![Page 27: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/27.jpg)
27
Soft Plate – Reverse Print/Coated
Standard Soft
![Page 28: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/28.jpg)
28
Print Results – Soft Plate/Uncoated Board
Tonal Values Uncoated Board (65 lpi)
0%
25%
50%
75%
100%
0%
25
%
50
%
75
%
10
0%
Data
Pri
nt
FAC
FSC
linear
![Page 29: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/29.jpg)
29
Soft Plate – Uncoated/Dot Gain
Standard
Soft
Standard
Soft
![Page 30: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/30.jpg)
30
Soft Plate – Uncoated/Kraft/Solid
Standard Soft
Uncoated
Kraft
![Page 31: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/31.jpg)
31
Soft Plate – Reverse Print/Uncoated
Standard Soft
![Page 32: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/32.jpg)
33
nyloflex® Product Range
FHC/FHC D Pre-, Post Print Very High 38
FAC/FAC D Post Print High 32
FCC Post Print Standard 32
FSC/FSC D Post Print Basic, Low 25
Product Application Board Quality Hardness Shore A
![Page 33: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/33.jpg)
34
nylosolv ®
• Low odor• Rarely requires balancing• Low plate swell for shorter drying times• Low plate swell prevents chipping in washout unit• Largest market share of washout solvents in Europe
![Page 34: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/34.jpg)
35
Conclusions
• The softer plate produces excellent solids coverage at lower impressions levels, with clean, open reverses, and comparable dot gain to harder plates
• The harder plate prints as well as current 32 Shore A products but has the durability of a harder plate
• The harder plate provided a higher impression latitude without showing distortion of the finer detail
![Page 35: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/35.jpg)
Ultra Thin Plates
![Page 36: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/36.jpg)
37
What are Ultra Thin Plates?
• Flexographic plates with a thickness of .030" (0.76 mm) Have a relief depth/polymer layer of .023" (0.58 mm) Have a base PET film thickness of .007" (0.18 mm) Have no " floor" polymer, plates are washed down to the PET
layer Typically a hard plate, 62 Shore A, (ASTM)
Polymer Layer
PET Base Layer
![Page 37: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/37.jpg)
38
Why Ultra Thin Plates Now?
• Flexo platemakers and printers are looking for technology/quality advancements
• Speed to press, up to color time, registration, print quality are at measured by higher standards
• Platemakers and even packaging buyers want to use eco-efficient technologies to reduce waste and carbon footprint
• Most wide web presses are fitted with sleeves, allowing for the necessary change in tooling
![Page 38: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/38.jpg)
39
So What Are The Advantages Of Going Thin?
![Page 39: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/39.jpg)
40
Weight
• Raw material has about ½ the weight 40% more plates per box = less packaging Less handling boxes, crates, skids Easier to carry sheets of material
![Page 40: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/40.jpg)
41
Weight
• Finished plates have 1/3rd the weight Easier handling Lower shipping costs
Example: 7 color job, 42x60" plates, shipped UPS Next Day from Chicago to Dallas:
• 0.067" plates cost $191.85
• 0.030" plates cost $138.70
• Savings per shipment of $53.15
• 5 Shipments per week @ 50 weeks would be a savings of $13,288
Source: UPS.com June 1 2009
![Page 41: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/41.jpg)
42
Productivity Comparison of a Single Plate
Solvent Processed .030"
Exposure – 8 min. Processing – 6 min. Drying – 30 min. Light Finishing – 6 min.
Total – 50 min.
Solvent Processed 0.067"
Exposure – 10 min. Processing – 8 min. Drying – 120 min. Light Finishing – 10 min. Total – 148 min.
![Page 42: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/42.jpg)
43
Even more flexible than .045" plates!
![Page 43: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/43.jpg)
44
Reduced Cupping, Thanks To Being Thinner
Cupping on solids happens more on thick plates
Thinner plates cup less,print more even,
require less impression
![Page 44: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/44.jpg)
45
Print Quality
In 1996, the FQC Program had leading suppliers and printers evaluate the optimum plate thickness for flexography in wide web printing.
![Page 45: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/45.jpg)
46
Print Quality
![Page 46: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/46.jpg)
47
Print Quality 2009: Equal or Better with .030"
SID 1.1
SID 1.4
Tone Reproduction Curve
0
0
0
1
1
1
1
0 20 40 60 80 100
Dot on File (%)
Prin
ted
Dot (
%) 0.030" 1920
0.067" 1920
![Page 47: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/47.jpg)
48
Print Quality: Conclusions
• As was concluded in the 1996 FQC Study, the 0.030" plates still print with less dot gain than 0.067“ plates.
• Medium to firm cushions tapes and sleeves are recommended for use with 0.030" plates.
![Page 48: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/48.jpg)
49
Eco Efficiency
• Eco Efficiency was calculated from 0.045" and 0.067" plates with a degree of solvent recycling at 87.5%
• Data was not specially optimised for better processing conditions (exposure) for 0.030" plates
• GWP incl. plate, packaging and transport contribution is estimated to be 32% lower for 0.030" plates compared to 0.067" plates
• Energy consumption incl. plate, packaging and transport contribution is estimated to be 40% lower for 0.030" plates compared to 0.067" plates
![Page 49: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/49.jpg)
50
0
2000
4000
6000
8000
10000
12000
14000
16000
18000
GW
P [g
CO
2-eq
/m²]
170 076
Solvent Solvent
Plate DisposalSolvent Development & DryingSolvent Production & RecyclingAblation & ExposurePackagingTransportationPlate Production (manufacture)Plate Production (material)
GWP of 0.030" plates (.76mm) versus 00.067" plates (1.70mm) extrapolated estimate
Eco Efficiency
0.067" .030"
![Page 50: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/50.jpg)
51
-50
0
50
100
150
200
250
300
350
400
En
erg
y [M
J/m
²]
170 076
Solvent Solvent
Plate DisposalSolvent Development & DryingSolvent Production & RecyclingAblation & ExposurePackagingTransportationPlate Production (manufacture)Plate Production (material)
Eco EfficiencyEnergy of 0.030" plates (.76mm) versus 00.067" plates (1.70mm) extrapolated estimate
0.067" .030"
![Page 51: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/51.jpg)
52
Summary of Benefits with 0.030" Plates
• Plates process about 60% FASTER than 0.067" plates• Lighter weight can save thousands $$$ per year in shipping• Flatter plates with less cupping = durability, fast up-to-color• Less packaging due to more plates per box• Perfect relief consistency, easier to process and print with• Estimated 32% reduction in Global Warming Potential• Estimated 40% reduction energy consumption• Prints with less dot gain than 0.067" plates
![Page 52: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/52.jpg)
Managing the Plate Making Waste Stream
A new program in development at Flint Group
![Page 53: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/53.jpg)
54
nyloflex® Sustainable Solutions
• Thinner Plates to reduce time, energy and material consumption by up to 40%. Let Flint show you how and provide the materials and tooling, along with a detailed transition plan
• Compressible sleeves to reduce the waste and cost of disposable cushion tapes. Improves run consistency while allowing for higher run speeds
• Plate room and pressroom audits, plus technique training to reduce production waste
• High efficiency process equipment. Use less chemistry, energy and time
• Recovery of plate packaging. Services available to recycle empty containers
• Recovery of used plates and distillation material. Services to remove plate materials and convert them into energy will be available soon
![Page 54: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/54.jpg)
55
An offer to our Customers
In our opinion the least that should be done with products after they have done their job in the Flexographic Process is to get part of the energy back that has been put into them during manufacturing
Flint Group offers customized Solutions for a responsible way to handle Flexographic waste other than just land-fill
" Waste to Energy" is one of the solutions that Flint will be offering to customers in a "removal and disposal" service
Flint Group FP benefits from experiences with similar services that have been successfully offered to our ink customers over the years
![Page 55: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/55.jpg)
56
More information will be available soon!
nyloflex® Sustainable Solutions
![Page 56: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/56.jpg)
57
Wrap Up
• Doing something different for your customer A new, softer plate for direct print corrugated that offers improved
solid coverage, sharp and open reverses, and comparable dot gain to 32 durometer plates
A harder plate that demonstrates sharp detail, low dot gain Thin plates to improve print quality, reduce waste, minimize
environmental impact A proactive program to reduce the environmental footprint of plate
making operations
![Page 57: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/57.jpg)
58
![Page 58: Flint Group A re-introduction Rich Emmerling Technical Manager Flint Group Flexographic Products](https://reader038.vdocuments.net/reader038/viewer/2022110206/56649cd85503460f949a1539/html5/thumbnails/58.jpg)
Thank YouThank YouThank YouThank Youwww.flintgrp.com