SMART ALART SYSTEM

SMART ALERT SYSTEM

INDEX

Sr.noTitlePage no.

1INTRODUCTION5

2LITERATURE SURVEY8

3PROPOSED METHODOLOGY10

4BLOCK DAIGRAMS11

5REQUIRED HARDWARE15

6ADVANTAGES16

7 DISADVANTAGES 16

8APPLICATIOANS17

9REFREANCE18

INTRODUCTIONDay by day,theelectronics industry develops the different systems as per requirement of people. So as anengg. We always think about the need of people and try to complete that requirement. So as per requirement of society we design this project, which is a combination of different subsystems and using this subsystem we can produce this important and intelligent device system.This project which can help the people in different problematic condition like flood, earthquake, war, tsunami or any other, for suddenly alerting purpose.So because of that we give the name of that project SMART ALERT SYSTEM to alert the more than thousands of people at a time and it can help to alert them in particular critical condition and save the life and properties. When an natural or manmade problem or situation will be create like flood , earthquake ,tsunami , war or any other, at that time under this area of critical condition, the people has required to help or alerting before/after that condition, so our this system can help to those people for alerting as well as helping purpose in minimum time. The more interesting advantage of our system is that, it has low cost and movable system, as per requirement we change the i/p then we can change the application of system. so we use that system as multipurpose electronic smart alert system.We are try to produce THE SMART ALART SYSTEM has the best Electronic system which can usable for more n more people at critical n problematic condition when he has required help, and we try to help those people between this project.This smart alert system is use as a :-

Flood alert system:-

Earth quack alert system:-Tsunami alert system:-

Army war/ police alert system :-

LITERATURE SURVEY1) Place 1:- fire Brigade, Date:-10/08/2013*At this place we collect the information about bridge, where we set our input section. *As well as we collect the information about the bridges which is standing in Krishna river under the sangli-kolhapur-satara district with his physical n technical specifications related to our project.*just observe and study the technical thinks which is they use in diff problematic condition like earth quack, river flood etc.

2) Place2:- collector office, 3) Date: 13/08/2013*In the collector office, we collect the information about some place which can in under the flood alerting area,Some information about villages.*we observe and collect the information about how they can work under that critical condition.3) Place 3:-diff. cellular mobile network office.Date:-17/08/2013*we visited for diff offices of cellular mobile network like BSNL, AIRTEL, IDEA,VODAFONE etc for information related to our project *we collect basic information about different communication devices and role of cellular network companies as a communication channel. 4) Place 4:- village under flood alert area.Date: 18/08/2013 to 22/08/2013*When we go that particular villages for observation about depth of river flood and conditions of people at the time of that situations, then we feel, this project is so important for that people.

4) Survey with internet:- www.google.com:This is a main website which a source of information for our project. We can search different type of technical information photos, videos related to our project www.mstworld.org-Information about previous river flood, earth quack, tsunami, or other natural critical condition. www.wikipedia.org/gps system- www.wikipedia.org/vts/system and control-Information about some electronics technology, required techniques and reference ideas collected on this website. www.yogitechautomation.in/ www.ayvaz.com/level-controllersThis is the industrial company website, we connect those particularcompanies for our project related concepts and information purpose.

*Animated System diagram*

PROPOSED METHODOLOGYThis smart alert system is basically depends on three main section and every section is consist of an electronics concepts with his related technological tools. As per project requirement that three sections are:1) Input section2) Control and observation section3) Output sectionThe following basic block diagram shows the basic blocks in our project.

By using this block diagram ,we can studied about project , we select the blocks and just going to search different technical parts which will be use in our project. As per reference of that particular block diagram we design the BLOCK DIGREAM OF SMART ALERT SYSTEM show in below,

BLOCK DAIGRAMS:1) INPUT SECTIOIN:-

as per input section, we can use the water or ligud level sensor to detect the water level and speed mesuring sensors to mesuring water speed convert that physical energy in to electrical signal by using driver circuit.. This driver circuit is an microcontrollerbased electronic circuit. Then that perticuler signal from microcontroller send wireless towards the control and observation section. This whole input section opreted on solar energy so it has not requird extrenal power supply.2) CONTROL AND OBSERVATION SECTION:-

In the 2ndsection, control and observation section, there are three subsystem will be work as a control system. In that particular section involve following subsections:- Computer section. Input /output controller. Mobile network. Power supply

-in the computer section all input data will be collect from all i/p sections at a time. And test that particular data on desktop, so as per situation data will be enter and provided towards next stage automatically or by operator through. - I/P or O/P section are controlled by this section. Program Error or hardware problems are creating in input or output section that observed in that subsection. Mobile network is also important control sub system. In that particular subsystem, we use VTS system. Actually we have required a data sending device to send a no of sms, so as per our survey or search this VTS system is most useful for this project .because of that purpose we use mobile network. For that whole system, powersupply is required so we use external power supply.So, in that control and observation section is a heart and brain of our smart alert system.

4) OUTPUT SECTION:-

In that section,a data which provided from 2nd section is send toward the different government departments (divisions) and particular people (area under the bridge) which is under flood alert system via mobile network through on his mobile.But in that section two types of data will be sending, one is towards Gov. Department, it is in detail form and another for people, which is in alerting type message.

SMART ALART SYSTEM:- complete system block digream

REQUIRED HARDWARE

At Input section:-1) Microcontroller 89C2051 Atmel ,20pin ic2) Water level sensors3) Amplifier(transistorized)4) Gsm modem setup5) 5volt, 12volt power supply.6) Solar cell with battery7) Other supporting components and tools.

At control and observation section:-1) Gsm receiver2) Computer set3) RS232 cable4) Mobile Network5) 230volt, 12 volt, 5volt power supply.6) Other tools n devices as per requirement.

At output section1) VTS system device2) RS232 cable3) Other tools n devices as per requirement.

ADVANTAGES: Smart alert systems can play an important role in river flood, earth quake, other natural or manmade critical condition to alert the people as early as possible and save the life and properties. we change just input hardware like sensors than application of circuit is also change Provides information to support decision making for the rapid response of emergency Management services. (Government). Smart alert system has low maintenance so its maintenance cost is minimum. Portable circuit easy to handle and because that we can use this system as per season. It is a good communication channel between theManagementservice (government)and people. Also Use solar power as a power supply.

DISADVANTAGESNo more disadvantages of the particular smart alert system, Wireless connection is required so by chance network problem is created. Because of troys rule no more SMS send by using GSM system at o/p section.

APPLICATION:-

1) Flood alert system.

2) Earth quack alert system

3) Tsunami alert system.

4) Army war/ police alert system.

5) Any type of alerting purpose (manually).

REFERENCE:-Internet Wabesite sources:- www.wikipedia.org/gps system www.mstworld.org www.google.com www.wikipedia.org/vts/system and control www.earthquake.usgs.gov/learning/topics/measure.php. www.ayvaz.com/level-controllers www.yogitechautomation.in

IEEE refrence pepar :-

Alkar, A. Z., & Buhur, U. (2005). An Internet Based Wireless Home Automation System for MultifunctionalDevices. IEEE Consumer Electronics, 51(4), 1169-1174. Retrieved fromhttp://www.thaieei.com/embedded/pdf/Automation/20022.pdf Ciubotaru-Petrescu, B., Chiciudean, D., Cioarga, R., & Stanescu, D. (2006). Wireless Solutions for Telemetry in Civil Equipment and Infrastructure Monitoring. 3rd Romanian-Hungarian Joint Symposiumon Applied Computational Intelligence (SACI) May 25-26, 2006. Retrieved fromhttp://www.bmf.hu/conferences/saci2006/Ciubotaru.pdf Conte, G., & Scaradozzi, D. (2003). Viewing home automat ion systems as multiple agents systems. RoboCUP2003,Padova, Italy. Retrieved from http://www.robosiri.it/ROBOCUP_2003/ROBOCUPSITOSIRI/articles/pdf/Conte.pdf

** Thank you **7| Page