floor cover guard - boltanomarine.comboltanomarine.com/pdf/cover-guard.pdf · floor cover guard...

Floor

Floor cover guard

Bainbridge International Ltd

Andy Nicholson phone +44 (0) 1489 776 022fax +44 (0) 1489 776 025

[email protected]

Bainbridge International Inc

Matt Rosenbergphone +1 781 821 2600fax +1 781 821 2609

[email protected]

Bainbridge International PTY Ltd

Steve Clemensphone +61 (0) 2 9938 1788fax +61 (0) 2 9938 2459

[email protected]

www.coverguard.com

Testing Body:BRE Testing:

LPS 1207

Selected samples from the Coverguard range of temporary protective coverings have been subjected to a series of tests

utilising the test methodology contained in LPS 1207: Issue 2:2003 by BRE.

CG 1036/72 DP: Report No: 218078 Rev 1: Date: 28.07.04CG 1336/72 DP: Report No: 218079 Rev 1: Date: 28.07.04

CG 2536/72 DP: Report No: 219540: Date: 16.11.04CG 4036/72 DP: Report No: 224625 Rev 1: Date: 17.10.05

Satisifies LPS 1207

Small flame test to BS 476, Part 12 1991Large flame test to BS 5852, crib no. 7

Smoke emission EN2825Toxic Gas emission EN2826

Oxygen index BS2782,(Part 1 method 141 1986)

(ISO 4589-1984)

The test report does not imply approval or certification and the test results only relate to the items tested and not necessarily

to the product brought to market

Warrington Fire Research:

IMO Resolution A.471 (XII) as amended by resolution IMO res. A652 (14)

CG1336/72DP- WARRES No: 302358 - 05.07.01CG2536/72DP- WARRES No: 302360 - 05.07.01CG4036/72DP- WARRES No: 302362 - 05.07.01

A653 floor covering, bulkheads and ceilings.A563-14 (superseded A471) vertical flame test textiles.

FAR Part 25: Appendix F, Part (4) “Vertical Test”CG1336/72DP- WARRES No: 302407 - 21.07.01CG2536/72DP- WARRES No: 302409 - 21.07.01CG4036/72DP- WARRES No: 302411 - 21.07.01

French M1 Standard

CG2536/72 DP - Certificate No: 12359-05 Date: 30.06.05

General Approvals:

Lloyds Register of ShippingDet Norske Veritas

Germanischer LloydBureau Veritas

Recommeneded by:

Ministry of Defence DNES

Recognised by:

Maritime and Coastguard Agency (MCA)

Certification:

Full test report available upon request.

General Applications:

Temporary protection for all types of finished surfaces for:Floors, walls, bulkheads, weatherdecks, furnishings, wrapping, covering and containment.

Part Numbers:

CG1036/72DP, CG1336/72DP, CG2536/72DP, CG4036/72DP

Description:

10 mil to 40 mil

Material:

Flame Retardant Polyethylene

Material Thickness:

0.254mm (0.010inch) to 1.0mm (0.040inch)

Colour:

Coverguard ocean blue

Finish:

Embossed with non-slip diamond deck plate pattern.

Roll Widths:

0.91m (36 Inches) to 1.82m (72 inches)

Roll Length:

110m (120yards), 120m (131yards), 55m (60yards), 36m (40yards)

Roll Areas:

33.2m2 (40yards2) to 125m2 (150yards2)

Roll Weight:

18.5 kilos (40.5lbs) to 30.5 kilos (67lbs)

Roll Diameter

200mm (8inch) to 300 mm (26inch)

The original coverguard product was developed for the temporary protection of all types of finished

floor surfaces. Designed for use within the industrial sector and specifically aimed at naval, cruise, ferry,

luxury yacht, offshore, rail, aviation, construction, new building, refit, repair and maintenance.

Illustration of floor cover guard

Wall

Wall cover guard



[email protected]



[email protected]



[email protected]

www.coverguard.com


Temporary protection for all types of finished surfaces for:Floors, walls, bulkheads, weatherdecks, furnishings, wrapping, covering and containment.

Part Numbers:

CG4036TF

Description:

40 mil Taffeta Flat

Material:


Material Thickness:

1mm (0.040 inches) - 1000 microns

Colour:

Cover Guard ocean blue

Finish:

Flat sheeting, one side smooth,the other matt.

Roll Widths:

0.91m (36 inches) to 1.82m (72 inches)

Roll Length:

36m (40 yards)

Roll Area:

33m2 (40 yards2 )

Roll Weight:

18.5 kilos (40.5lbs) to 35 kilos (77lbs)

Roll Diameter:

300mm (12 inches)

Wall Cover Guard was developed from the existing Cover Guard range (by request from the market) to protect

all types of vertical wall and bulkhead finishes from impact damage during new building, refit and repair.

Illustration of wall cover guard


LPS 1207


utilising the test methodology contained in LPS 1207: Issue 2:2003..

CG4036TF - Report No: 224625 Date: 17/10/05

Satisifies LPS 1207Small flame test to BS 476, Part 12 1991

Large flame test to BS 5852, crib no. 7Smoke emission EN2825

Toxic Gas emission EN2826Oxygen index BS2782,

(Part 1 method 141 1986)(ISO 4589-1984)

The test report does not imply approval or certification and the test results only relate to the items tested and not necessarily

to the product brought to market

Warrington Fire Research:

IMO Resolution A.471 (XII) as amended by resolution IMO res. A652 (14)

A653 floor covering, bulkheads and ceilings.A563-14 (superseded A471) vertical flame test textiles.

FAR Part 25: Appendix F, Part (4) “Vertical Test”

General Approvals:



Recommeneded by:


Recognised by:


Certification:




[email protected]



[email protected]



[email protected]

www.coverguard.com

Carpet

Carpet cover guard


Temporary protection for walkways, aisles, cabins, stairs, public areas.

Part Number(s):

CG04100SAT.

Description:

Self Adhesive Carpet Guard. SUITABLE FOR CARPETS ONLY.

Adhesive Backing:

Quick clean release for easy installation and removal without adhesive transfer to protected carpet surface.

Approvals:

French M1 Standard

Certification:


New carpet cover guard is a transparent, extruded polyethylene texture film that features a new Supermatrix water-based adhesive, reverse wound system to allow simple yet effective installation and removal. It is

specifically designed for the protection of all types of carpets during new building, refit, maintenance and

outfitting projects.

Manufactured from low density polyethylene, the new carpet cover guard is flame retardant, very lightly

embossed and benefits from having a Supermatrix water-based adhesive backing which is a reverse wound

system, this ensures that the product remains firmly in place during the protection period. Supermatrix

adhesive technology offers a discontinuous layer of adhesive in a dot matrix pattern.

Material Thickness:

75 Microns

Colour:

Transparent White

Finish:

Flat Sheeting

Roll Widths:

0.91 Metres (36 Inches)

Roll Length:

100 Metres (110 Yards)

Roll Areas:

91 Sq Metres (120 Sq Yards)

Material Weight:

85 Grams / m2 approx

Roll Weight:

8.2 Kilos approx

Roll Diameter

145 mm

Illustration of carpet cover guard

Impact Foam

Impact foam cover guard



[email protected]



[email protected]



[email protected]

www.coverguard.com


Temporary protection for all types of vertical & horizontal finishes both indoor and outdoor such as walls, panelling, bulkheads, doors, pillars, furniture, electrical & machinery equipment, corner protection, packaging, wrapping & covering.

Part Number(s):

CG0515FM

Material:

Flame retardant polyethylene foam

Material Thickness:

5mm (0.196 inch)

Colour:

Cover guard ocean blue

Finish:

Polyethylene foam with its micro-cellular construction designed to absorb and provide high performance cushioning.

Fixing Mechanism:

Self wrapping of large areas or fixed with adhesive tape such as the tape cover guard system.

Roll Widths:

1.5m (59 inch)

Roll Length:

75 m

Roll Coverage:

1132

Roll Weight:

16 Kilos (35.2 lbs)

Roll Diameter:

600mm (23.6 inch)

Testing Body:

BRE Testing:



Report No. 218077 Rev 1 Date: 28.07.04

Satisifies LPS 1207Small flame test to BS 476, Part 12 1991

Large flame test to BS 5852, crib no. 7Smoke emission EN2825

Toxic Gas emission EN2826Oxygen index BS2782,

(Part 1 method 141 1986)(ISO 4589-1984)

The test report does not imply approval or certification and the test results only relate to the items tested and not necessarily to

the product brought to market

Warrington Fire Research

IMO resolution A.471 (XII) as amended by resolution

IMO res.A652 (14).

WARRES No: 302365 Date: 05.07.01

A653 floor covering, bulkheads & ceilings

A563-14 (superseded A471) vertical flame test textiles

General Approvals:



Offshore Certification Bureau LtdMarine Safety Agency (DTI)


Certification:

Full test report available upon request

Manufactured from a blend of low-density polyethylene flame retardant foam, ultraviolet, anti static and

pigment additives, impact cover guard is an extruded microcellular construction to give maximum impact

resistance. This product is extremely durable, tough, cushions and absorbs shock, offering total protection

against impact, indentation, marking, most chemicals, paint over-spray etc during the outfitting stages.

Illustration of impact foam cover guard

Impact Corrie

Impact corriboard cover guard



[email protected]



[email protected]



[email protected]

www.coverguard.com


Protection of wooden/marble or vinyl fl oors. Also can be used as a wall/door protector, and a translucent version is available for windows. Corriboard can be die-cut, hot-air welded, ultra-sonically welded, glued and stapled.

Part Number(s):

CG24122PP3LD

Description:

FR impact cover guard is waterproof, lightweight, fl exible and easy to cut

Material:

Twin-fl uted polypropylene board

Material Thickness:

3mm

Colour:

White, printed with Cover Guard logo

Finish:

Polypropylene board with its twin-fl uted construction designed to provide high performance cushioning

Sheet Widths:

1.2m

Sheet Length:

2.4m

Sheet Coverage:

3m2 per sheet

Impact cover guard is the ideal protection where impact resistance is a high priority. i.e fi nished wooden/

marble/vinyl fl oors where a thinner protection may allow heavy/sharp objects to damage the fl oor beneath.

This protection is in the form of a twin-fl uted polypropylene board, which allows a cushion of air to rest

between the fl oor and any work taking place upon it.

Illustration of impact corriboard twin fl ute design

Illustration of impact corriboard

Testing:

LPCB Approved to LPS1207

Selected samples from the Coverguard range of temporary protective coverings have been subjected to a

series of tests utilising the test methodology contained in LPS 1207: Issue 2:2003.

Satisifi es LPS 1207Certifi cate 365A / Issue 1

Small fl ame test to BS 476, Part 12 1991Large fl ame test to BS 5852, crib no. 7

Smoke emission EN2825Toxic Gas emission EN2826

Oxygen index BS2782(Part 1 method 141 1986)

(ISO 4589-1984)

Certifi cation:

Certifi cate available upon request.

Scaffold

Scaffold cover guard



[email protected]



[email protected]



[email protected]

www.coverguard.com


Scaffolding, screening, containment, wrapping and covering.

Part Number(s):

CG0875SC

Base Material:


Scrim Material:

Polyester Scrim construction for maximum strength & tear resistance.

Colour:

White

Finish:

Flat Taffeta sheeting with matt finish

Properties:

UV inhibitors and anti static stabilisers

Resistant to:

Water, oil & most chemicals

Temperature Range:

-25o to +1104

Thickness:

0.008 inch (0.2mm) 200 microns

Roll Width:

1.82m (72”)

Roll Length:

100m (110 yards)

Roll Area:

182m2 (220 yards2)

Material Weight:

240grms/m2

Roll Weight:

45 kilos

Roll Diameter:

250mm (10”)

During periods of new building, construction and refit there is often a requirement when specific areas need to be worked on. Under these circumstances there is a need to screen off areas allowing work to proceed whilst minimising disruption to the other work locations. Scaffold cover guard is designed to achieve this. These areas can be safely screened off and scaffold can be constructed to contain shot blasting debris, paint over-spray and contamination from the other work places. Markets include: Naval, commercial shipbuilding/refit, offshore and construction.

Approvals:

Warrington Fire Research Centre (London) Ltd

Selected samples from the Coverguard range of temporary protective coverings have been subjected to a series of tests utilising the test

methodology contained in LPS 1207: Issue 2:2003 by BRE.

Satisfies LPS1207Small Flame Test to BS 476:

Part 12: 1991Large Flame Test To BS 5852

Crib number 7Smoke Emission: EN2825

Toxic Gas Emission: EN2826Oxygen Index: BS 2782:

Part 1: Method 141: 1986 (ISO 4589-1984)

WARRES No: 300784, 300800, 300805 & 300809 Date: 15.02.00

FAR Part 25: Appendix F, Part (4) “Vertical Test”

WARRES No: 302412 Date: 23.07.01

I.M.O Resolution A.471 (XII) as amendedBy resolution IMO res. A.652 (14)

WARRES No. 302363 Date: 05.07.01

A653 Floor Coverings, Bulkheads and Ceilings.

A563-14 (Superceded A471) Vertical Flame Test Textiles.

Large Flame Test

WARRES No: 300784

Approved To:

Rolls Royce Nuclear Category B Approved for use in the reactor room courtesy of DML

and BAE Systems respectively/independent testing.

Type Approvals:



Recommended By:


Recognised By:


Certification:


Illustration of scaffold cover guard



[email protected]



[email protected]



[email protected]

www.coverguard.com

Bubble-wrap

Bubble-wrap cover guard


Temporary protection for all types of fi nished surfaces and packing needs. Protection uses include: Wrapping, covering of electrical appliances, machinery, panelling, bulkheads, walls, glassware, portable equipment and general padding, transportation and covering appliances.

Part Number(s):

CG4815BW - Bubble-wrap

CG48153BW - Tri-Wall Bubble-wrap

Description:

Temporary FR Bubble-Wrap

Material:

Flame retardant low density polyethylene nylon barrier layer closed cell fi lm (extruded construction)

Bubble Height:

4.8 mm (0.189 inch) and 12.5 mm 0.492 inch)

Weight per M2:

80 grams per m2

Colour:

White, printed with cover guard logo

Finish:

CG4815BW: One surface fl at the other bubble cushioning.

CG48153BW: Both sides fl at witha bubble centre.

Bundle Widths:

1.50m (59 inch)

Bundle Length:

100m (109 yards)

Bundle Area:

150m2 (180yards2)

Bundle Weight:

12 kilos (26 lbs)

Bundle Diameter: 660mm (26inch)

Wrapping and covering objects to protect them in situations is often the only option available and if done

properly can be a very cost effective solution. Bubble-wrap cover guard can be used to shroud items requiring

protection from airborne particles, light impact and during storage or transportation of equipment.

Illustration of tri-wall bubblewrap - CG48153BW

Illustration of bubblewrap - CG48153W


LPS 1207



Report No: 219791 Date: 16.11.04

Satisifi es LPS 1207Small fl ame test to BS 476, Part 12 1991

Large fl ame test to BS 5852, crib no. 7Smoke emission EN2825

Toxic Gas emission EN2826Oxygen index BS2782

(Part 1 method 141 1986)(ISO 4589-1984)

The test report does not imply approval or certifi cation and the test results only relate to the items tested and

not necessarily to the product brought to market

Certifi cation:




[email protected]



[email protected]



[email protected]

www.coverguard.com


Used as a screening, barrier and containment against the risk of fire and smoke such as curtains, awnings and scaffolding where permanent fire proof fabric is required.

Part Number(s):

CG9000FC

Weight:

1085g/m2

Thickness:

0.9mm

Dimensions:

Sold by the roll - 0.94m x 46m (43.2m2)

Base fabric and weave:

Fibreglass / Satinweave (Count: Warp: 47, Fill: 28)

Colour and Coating:

Red Silicone

Temperature Resistance:

260oc

Fire curtain cover guard is designed as a welding protection material for use in the marine, offshore and petrochemical industry as well as other heavy welding plants. It has a fibreglass base fabric meeting US military specification MIL-Y-1140C and has been impregnated with our specially formulated silicone rubber compound. The product has recently been tested to British Standard 476 Part 7, for the surface spread of flame and obtained the highest classification possible of Class 1. It is also the first welding blanket to meet the FM Global approval standard 4950 fo welding blankets. This heavy duty fabric provides greater life, water and oil repellency than uncoated fabrics, whilst providing low smoke and high fire retardancy.

Tensile Strength:

Method: FTMS 191A/M5102Warp: 878 N/cm (500 LBS/IN) Min. AVG

Fill: 702 N/cm (400 LBS/IN) Min. AVG

Tear Strength:

Method: FTMS 191A/M5136Warp: 333 N Min. AVG

Fill: 222 N Min. AVG

Burst Strength:

Method: FTMS 191A/M5122 (MULLEN) 276 N/cm2 Min. AVG

Hydrostatic Resistance:

Method: FTMS 191A/M5512 (MULLEN) 138 N/cm2 Min. AVG

Flame Resistance:

Method: FTMS 191A/M5903.1Flame Out: 1 SecondAfterglow: 2.5 Seconds

Char Length: 7.62mm Max AVG

Method: BS476 Part 7 Surface Spread of Flame

Classification: Class 1

Fire-curtain

Fire-curtain cover guard

Illustration of fire-curtain cover guard

Tape

Tape cover guard



[email protected]



[email protected]



[email protected]

www.coverguard.com


Joining of cover guard sheeting. packaging, wrapping and sealing, binding and bundling, general maintenance jobs, exterminations, weather proofing, entertainment industries (show set-up and stage), boat manufacturing and repair and various other general purpose applications.

Part Number(s):

CGTP04BU

Colour:

Blue

Dimensions:

100mm x 50m

Tape Thickness (mm):

Average Values - 0.234Test Method - PSTC-33

Elongation (%):

Average Values - 10Test Method - PSTC-31

180’ Peel Adhesion (N/cm):


Tensile Strength (N/cm):


Quick Stick (N/cm):


Unwind (N/cm):


Ball Tack (cm):

Average Values - 3Test Method - PSTC-6

Moisture Vapour Permeability (m2/24hrs) no greater than 75 gms.

Cover guard tape has a high quality cloth backing with polyethylene film. It has a very aggressive natural

rubber/resin blend adhesive system and has excellent conformability with good resistance to tear and

moisture. The aggressive adhesive system will bond to almost any surface and is water resistant.

Illustration of tape adhesive

Illustration of tape

floor cover guard - boltanomarine.comboltanomarine.com/pdf/cover-guard.pdf · floor cover guard...

Documents