flow curve (flow rates guaranteed to +/ - 5%)psv-103 farris pressure safety valve model# 27da33-m20...

21
60 ºF Cat 3306NA - 138HP 90 ºF 1800 rpm 2500 FT Frick XJF 151L 0.6 N/A 1.3 1800 rpm see graph 375 psig @ 250ºF Engine auxiliary power: 7 HP P:\10821 Burlington 135HP 151L\[10821 Burlington TPS135 151L CRV00 04-24-01.xls] PACKAGE RATED PRESSURE: Gas K Value: Discharge pressure: Amb. Temperature: Altitude: COMPRESSOR: SPEED INCREASER: COMPRESSOR SPEED: TPS135 Standard Booster Package DRIVER: DRIVER SPEED: Suct Temperature: PROCESS DESIGN Gas Sp. Gr.: 0.0 0.5 1.0 1.5 2.0 2.5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 Flow (Mmscfd) Suction Pressure (PSIG) FLOW CURVE (flow rates guaranteed to +/- 5%) Pd 150 Psig Pd 200 Psig Pd 250 Psig Pd 300 Psig Pd 350 Psig 70 80 90 100 110 120 130 140 150 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 BHP Required Suction Pressure (PSIG) POWER CURVE Pd 150 Psig Pd 200 Psig Pd 250 Psig Pd 300 Psig Pd 350 Psig 0 15 30 45 60 75 90 105 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 Percent of Load Suction Pressure (PSIG) PERCENT COMPRESSOR LOAD Pd 150 Psig Pd 200 Psig Pd 250 Psig Pd 300 Psig Pd 350 Psig All pressures shown are at skid edge Please consult Toromont for any special ratings outside these ranges. TOROMONT PROCESS SYSTEMS

Upload: others

Post on 26-Oct-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

60 ºFCat 3306NA - 138HP 90 ºF1800 rpm 2500 FTFrick XJF 151L 0.6N/A 1.31800 rpm see graph375 psig @ 250ºF Engine auxiliary power: 7 HP

P:\10821 Burlington 135HP 151L\[10821 Burlington TPS135 151L CRV00 04-24-01.xls]

PACKAGE RATED PRESSURE:

Gas K Value:Discharge pressure:

Amb. Temperature:Altitude:

COMPRESSOR:SPEED INCREASER:

COMPRESSOR SPEED:

TPS135 Standard Booster PackageDRIVER:

DRIVER SPEED:

Suct Temperature:PROCESS DESIGN

Gas Sp. Gr.:

0.0

0.5

1.0

1.5

2.0

2.5

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100

Flow

(Mm

scfd

)

Suction Pressure (PSIG)

FLOW CURVE (flow rates guaranteed to +/- 5%)

Pd 150 PsigPd 200 PsigPd 250 PsigPd 300 PsigPd 350 Psig

70

80

90

100

110

120

130

140

150

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100

BH

P R

equi

red

Suction Pressure (PSIG)

POWER CURVE

Pd 150 PsigPd 200 PsigPd 250 PsigPd 300 PsigPd 350 Psig

0153045607590

105

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100

Perc

ent o

f Loa

d

Suction Pressure (PSIG)

PERCENT COMPRESSOR LOAD

Pd 150 PsigPd 200 PsigPd 250 PsigPd 300 PsigPd 350 Psig

All pressures shown are at skid edge

Please consult Toromont for any special ratings outside these ranges.

TOROMONTPROCESSSYSTEMS

Page 2: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 1 of 9

Bill of Materials BOM

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

FG-118 Henry Sight Flow GlassModel LI-48-1/2c/w 1/2" NPT connectionsProcess Fluid: Compressor Lube Oil/ Natural Gas

Rev. # 0

FO-128 Minimum Flow Orifice Plate1/8” Opening, 304 SS, to fit ¾” – 300# Flanged conn, 2 5/8” O.D, c/w 1/8” Bore. No handle, No stamp requiredProcess Fluid: Compressor Lube Oil

Rev. # 0

FO-129 Frick Compressor Oil Flow OrificeSupplied with Compressor

Rev. # 0

HS-114 ESD PushbuttonAllen-Bradley Model 800H FRXT6D4, Red, Mushroom Head, Maintained contact, CSA approved, NEMA 4 enclosure, connected to intrinsically safe systemTo be purchased by Electrical Dept.

Rev. # 0

LC-130 Murphy Level ControllerModel L-1200-N-DVO for dump valve operationc/w buoyglass displacer, 2" NPT process connection 1/8" NPT inlet connection, 1/4" NPT outlet connectionFluid: Water / Condensate / Natural gas

Rev. # 0

LC-138 Norriseal pneumatic level controller, Series #1001AModel #1001A-2SM-60-SRDF-AHc/w: 2" NPT connections, right hand mounting, Snap/Direct acting with 1 1/4" dia x 16" long aluminum vertical displacerand 16" displacer arm, yellow spring, 1 1/2 foot verticle chain extension.Dump span: 5.0" to 16" for S.G.= 0.85Max. process temperature, 400 Fsweet fuel gasProcess Fluid: Water / Condensate / Natural gasNote: TPS to fabricate flanged/NPT tee connection for vessel.

Rev. # 0

LG-115 Reflex Level GaugeMake: Daniel Glass Model# 72RL GaugeValve Model# NONEDescription: 22” visible length reflex glass, ¾” NPT process connection, ½” NPT gauge connection. Rated 1820 psig at 300 º FProcess Fluid: Compressor Oil / Natural Gas

Rev. # 0

LG-117 Tubular Level GaugeGlass Model # N7AGauge Glass 5/8” OD red line glass by 14” OAL, Gauge Valve 1/2" (1 pair), Steel Material, c/w 1/2” NPT process connectionProcess Fluid: Engine Oil

Rev. # 0

LG-132 Reflex Level GaugeMake: Daniel Glass Model# 91RL GaugeValve Model# 1S (1 pair)Description: 12 5/8” visible length reflex glass, ¾” NPT process connection, ½” NPT gauge connection. Rated 1680 psig at 300 º FProcess Fluid: Water / Natural Gas Condensate

Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 3: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 2 of 9

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

LG-139 Reflex level GaugeMake: Daniel Glass Model# 52RL Gauge Valve Model# 1S (1 pair)Description: 17 1/4” visible length reflex glass, ¾” NPT process connection, ½” NPT gauge connection. Rated 1750 psig at 300 º FProcess Fluid: Water / Condensate / Natural Gas

Rev. # 0

LICSLL-126

Murphy Level Indicating Control Switch Model LM301Mounting Bracket M/N 115000371PBSPDT switch, 1/4" Orifice. Process Fluid: Engine Lube Oil

Rev. # 0

LISLL-127

Murphy Level Indicating Switch Model 45-EL150K1-E, Electric Low Level Switch c/w SPDT snap acting switch Process Fluid: 50/50 Glycol/water

Rev. # 0

LSHH-131

Murphy Level Control Switch Model L1100, Electric Level Switch c/w 1 1/2" MNPT Process Connection, SPDT snap switch Explosion Proof Class 1, Div. 1, Group D, CSA approved. Process Fluid: Water/ Natural Gas Condensate

Rev. # 0

LSHH-117

Murphy Level Control Switch Model L1100, Electric Level Switch c/w 1 1/2" MNPT Process Connection, SPDT snap switch Explosion Proof Class 1, Div. 1, Group D, CSA approved. Process Fluid: Compressor Oil / Natural Gas

Rev. # 0

LSLL-116

Murphy Level Control Switch Model L1100, Electric Level Switch c/w 1 1/2" MNPT Process Connection, SPDT snap switch Explosion Proof Class 1, Div. 1, Group D, CSA approved. Process Fluid: Compressor Oil

Rev. # 0

LV-136 Worcester Automatic Switching ValveModel 1 1/2"-4446RV-SWc/w CS body, SS ball and stem, Socket weld end connectionsWorcester Model 20-39RSN-P5 spring return pneumatic actuator.c/w mounting bracket kitProcess Fluid: Water / CondensateApplication: Suction Filter Drain

Rev. # 0

PCV-104 Fisher Outlet Pressure RegulatorModel 627R Set at 30 psi c/w 1" NPT connections, ductile iron body, 15 to 40 psi spring range, 3/16" port, internal relief Process Fluid: Natural Gas

Rev. # 0

PCV-110 Fisher Outlet Pressure RegulatorModel S402 Set at 6" wc c/w 1" NPT connections, cast iron body, 5.5 to 8" wc spring range, 1/4" port, internal relief (medium spring)Process Fluid: Natural Gas

Rev. # 0

PCV-111 Fisher Outlet Pressure RegulatorModel 627R Set at 60 psi c/w 1" NPT connections, ductile iron body, 35 to 80 psi spring range, 3/16" port, internal relief Process Fluid: Natural Gas

Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 4: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 3 of 9

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

PCV-121 Fisher Outlet Pressure RegulatorModel 627 Set at 60 psi c/w 1" NPT connections, ductile iron body, 35 to 80 psi spring range, 1/2" portProcess Fluid: Natural Gas

Rev. # 0

PCV-130 Fisher Outlet Pressure RegulatorModel 67 CFR Set at 55 psi c/w 1/4" NPT connections, 30 to 60 psi spring range c/w Wika Model# 111.10 CBM Pressure Indicator Process Gas: Instrument Gas

Rev. # 0

PCV-138 Fisher Outlet Pressure RegulatorModel 67 CFR Set at 30 psi c/w 1/4" NPT connections, 30 to 60 psi spring range c/w Wika Model# 111.10 CBM Pressure Indicator Process Gas: Instrument Gas

Rev. # 0

PCV-150 Refrigerating Specialities Outlet Pressure RegulatorOutlet Pressure Set at 10 psigModel# 1" A4AOc/w 1" port, 1" NPT connections, "V" spring range.Factory certified to 450 psig max body design pressureProcess Fluid: Natural Gas

Rev. # 0

PDCV-120

R/S Differential Pressure Control ValveSet at: Differential 95 psidModel 2-1/2 " A4ALE Fail Closed, c/w 2-1/2" port, 2-1/2” WN connections, "A" spring for differential, external sensing port on differential, MAWP to be factory certified at 375 psigProcess Fluid: Natural Gas

Rev. # 0

PDISHH-130

Murphy Panel Mount Differential Pressure Indicating Switch Model# 25CDPEF-50 Set to 30 psid risingc/w 0 to 50 psi scale, 2-1/2" dial, 1/4" lower connection, SPDT switch Process Fluid: Compressor Lube Oil / Natural GasSupplied with Control Panel

Rev. # 0

PDISLL-106

Murphy Panel Mount Differential Pressure Indicating Switch Model# 25CDPEF-400 Set to 15 psid fallingc/w 0 to 400 psi scale, 2-1/2" dial, 1/4" lower connection, SPDT switch Process Fluid: Compressor Lube OilSupplied with Control Panel

Rev. # 0

PI-133 Wika Local Mounted Pressure Gauge Model# 233.54 c/w psi and kPa dual scale, 0 to 2750 kPag / 0 to 400 psi, 4" dial, 316 stainless steel tube, socket and tip material, 1/2" NPT lower connection Liquid filled, top vent plug. Process Fluid: Water / Natural Gas CondensateApplication: Blowcase Pressure Indicator

Rev. # 0

PISLH-105

Murphy Panel Mount Pressure Indicating Switch Model# 45PEF-R-200-TS High Set at 90 psig, Low Set at 5 psigc/w 0 to 200 psi scale, 4-1/2" dial, 1/4" lower connection, 316 SS wetted parts, SPDT switch, tube stop Process Fluid: Natural GasSupplied with Control Panel

Rev. # 0

PISLH-108

Murphy Panel Mount Pressure Indicating Switch Model# 45PEF-R-400- Hi Set at 300 psigLow Set at 10 psigc/w 0 to 400 psi scale, 4-1/2" dial, 1/4" lower connection,316 SS wetted parts, SPDT switchProcess Fluid: Natural GasSupplied with Control Panel

Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 5: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 4 of 9

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

PISLL-122

Murphy Panel Mount Pressure Indicating Switch Model# A25PEF-100 Set at 15 psig fallingc/w 0 to 100 psi scale, 2-1/2" dial, 1/8" rear connection, brass / copper wetted parts, SPDT switch Process Fluid: Engine OilSupplied with Control Panel

Rev. # 0

PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125 sq. in. orifice, 316 ss base, disc, disc insert and spring, CS cylinder, CRNBased on fireProcess Fluid: Natural GasNote: Complies to NACE in primary zone.

Rev. # 0

PSV-113 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 375 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125 sq. in. orifice, 316 ss base, disc, disc insert and spring, CS cylinder, CRNBased on full flow of C-1Process Fluid: Natural GasNote: Complies to NACE in primary zone.

Rev. # 0

PV-133 Norriseal Control Valve Model# 2275-S-40DTV9BA2c/w 1” NPT Connections, Standard Materials, 4000 WOG pressure rating, Direct Non-adjustable, Tee Body style, Viton seals, neoprene diaphragm, teflon packing, 316SS trim material, 1/2” orifice, 0 to 35 psig, Fail Open ActuatorProcess Fluid: Natural Gas Condensate/ Water Application: Blowcase Vent

Rev. # 0

PV-134 Norriseal Control Valve Model# 2275-S-40RTV9BA4 c/w 1” NPT Connections, Standard Materials,4000 WOG pressure rating, Reverse Non-adjustable, Tee Body style, Viton seals, neoprene diaphragm, teflon packing, 316SS trim material, 1/2” orifice, 0 to 35 psig, Fail Closed ActuatorProcess Fluid: Natural Gas Application: Blowcase Power Gas

Rev. # 0

SISHH-125

Murphy Panel Mounted Tachometer / Overspeed Switchand Hour meterModel TTDJR-IGN-T Set at 2000 RPMc/w digital displayNote: Part of Selectronic Tattletale Annunciator Supplied with Control Panel

Rev. # 0

TCV-119 Amot 3 Way Thermostatic Control ValveModel # 1" CMST 160 01c/w 1” NPT connections, 160 degree F element full open at 170 degree F, standard trim, Cast steel body, MAWP - 700 psigProcess fluid: Compressor Lube Oil

Rev. # 0

TISHH-109

Murphy Panel Mount Temperature Indicating SwitchModel# A25TEF250-16 Set at 200 deg F rising.c/w 130-250 deg F scale, 2 1/2" dial, 16' capillary, SPDT switch, thermowell (1/2" NPT process x 5/8"-18 device, 2 1/2" oal, 0.375" bore, 304ss)Application: Compressor Oil Temp. Note: Supplied with Control Panel

Rev. # 0

TISHH-112

Murphy Panel Mount Temperature Indicating SwitchModel# A25TEF300-25 Set at 240 deg F rising.c/w 140-300 deg F scale, 2 1/2" dial, 25' capillary, SPDT switch, thermowell (1/2" NPT process x 5/8"-18 device, 2 1/2" oal, 0.375" bore, 304ss)Application: Discharge Temp. Note: Supplied with Control Panel

Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 6: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 5 of 9

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

TISHH-123

Murphy Panel Mount Temperature Indicating SwitchModel# A25TEF250-16 Set at 210 deg F rising.c/w 130-250 deg F scale, 2 1/2" dial, 16' capillary, SPDT switch, shop-supplied Swagelok or similar fitting for engine blockApplication: Jacket Water Temp. Note: Supplied with Control Panel

Rev. # 0

UV-107 Murphy Fuel Gas Shutoff Valve Model M-2582-C-E1” NPT pipe size, vent port, manual latch reset, Class 1, Div 2, Gr D, Entela approved Process Fluid: Fuel Gas

Rev. # 0

UV-135 Fisher Switching ValveModel #164Ac/w 1/2" NPT Connections ports A, B, CMaximum valve body pressure 250 psiSpring range: 30 - 60 psiProcess Fluid: Instrument gas

Rev. # 0

UV-137A SMC Flow Control Valve Model# NAS 4000-NO2 c/w 1/4” NPT Connections, 316SS needle and seat, Buna N check Process Fluid: Water/ Natural Gas Condensate

Rev. # 0

UV-137B SMC Flow Control Valve Model# NAS 4000-NO2 c/w 1/4” NPT Connections, 316SS needle and seat, Buna N check, Process Fluid: Water/ Natural Gas Condensate

Rev. # 0

VSHH-124

Murphy Vibration Switch Model# VS2-E c/w manual reset, 1-SPDT switch, Weather Proof Enclosure. Entela approvedApplication: Unit Vibration

Rev. # 0

CP-1 Murphymatic Control Panel c/w 24x30x9 front/rear access enclosure (front hinge on right)TTDJR-IGN-T Selectronic Tattletale / Tachometer / Overspeed / Hour Meter (1) 45PEF-R-200 Suction Pressure swichgage(1) 45PEF-R-400 Discharge Pressure swichgage(1) A25PEF-100 Engine Oil Pressure swichgage(1) 25CDPEF-400SF15 Differential Pressure swichgage(1) 25CDPEF-50SR30 Differential Pressure switchgage(2) A25TEF-250-16 Temperature swichgages (1) A25TEF300-25 Temperature swichgage

Rev. # 0

100 C-1 Frick Screw Compressor Model# XJF-151L c/w 5" suction flange with 5" pipe stub c/w 3/4" and 1/4" connections, 4" discharge flange, handwheel capacity control,Slide Valve potentiometers Max Driver Speed: 3600 - 6297RPM Design Pressure: 375 PSIG60:37 Gear Ratio

Rev. # 0

101 CE-1 CAT 3306NA Gas Engine c/w natural gas power unit (without regulator), standard governor set for 1800 rpm, tachometer drive, service indicator, 3-groove "A" belt crankshaft sheave and 2-groove "B" section extension, CSA shielded ignition. Note: 2-groove extension to be removed by shop

Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 7: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 6 of 9

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

102 V-1 Horizontal Suction Filter Size: 30” O.D. X 90" s/sMAWP: 245 psig @ 250�F MDMT: -20 deg F @ 245 psig C.A.: 0.0625” c/w 4" 150# RFWN inlet and outlet, (8) JPMG-36349-V elements.Register in AB, BC and SK Note: Manufactured By TPS.

Rev. # 0

103 V-2 Primary Oil Separator Chil-Con Size: 18” O.D. X 60 s/sMAWP: 400 psig @ 250�F MDMT: -20 deg F @ 400 psig C.A.: 0.0625” c/w 4" pipe stub inlet / 4" 300# RFWN outletRegister in AB, BC and SK

Rev. # 0

104 V-3 Secondary Oil Separator Size: 18” O.D. X 52 11/16" oal Chil-Con Model COSM-205-T MAWP: 400 psig @ 250�F MDMT: -20 deg F @ 400 psig C.A.: 0.0625” c/w 4" pipe stub inlet / outletRegister in AB, BC and SK Note: Approval drawing requiredNote: Vessel nameplate to be installed as follows: when viewing nameplate on installed vessel, vessel inlet to be on right, vessel outlet to be on the back.

Rev. # 0

105 E-2 Alfa Laval Vicarb Oil Cooler Model V20-SST-75 c/w 59 plates, 2" 300# RFWN oil connections (F2,F3), 2" MNPT coolant connections (F1,F4), MAWP 375 psig@250 deg F, MDMT -20 deg F @ 375 psig, 316ss plates, nitrile gaskets, steel frame and heads Register in AB, BC and SK

Rev. # 0

106 E-1 Air-X Combined Gas / Coolant Cooler Model 48-EF 2 sectionsc/w 4" 300# RFWN gas inlet, 3" 300#RFWN gas outlet, 2" 150# RFWN inlet and outlet coolant connections, standard materials, manual louvres for each section, bug screens, mounted adjustable idler shaft, drain holes in bottom pans, MAWP (gas) 400 psig @ 300 deg F, MDMT (gas) -20 deg F @400 psig, MAWP (coolant) 14 psig @ 300 deg F, Four blade 48" diameter fan, 760 rpm, left rotation. Register gas section in AB, BC and SK. Note: Approval drawing required

Rev. # 0

107 Headline Fuel Gas Filter Housing Model# 680-A-1” Element Model# 38-152-70C c/w 1" NPT connections, MAWP 250 psig at 200°F, 95 percent efficiency , 0.1 micron coalescer elementProcess Fluid: Natural Gas

Rev. # 0

108 Parker Oil Filter Model 80CN205QM225E1E121 (housing), D761G06A (element) c/w 1 1/2" FNPT connections, 5 micron element, manual reset pop-up DP indicator, bowl drain plug. Process Fluid: Compressor Oil

Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 8: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 7 of 9

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

109 Cata-Dyne Infra-Red Heater Heater Model# BX-24x24 3/8" NPT isolation valve, natural gas orifice, 12 VDC starter coilAccessories: 22500 BTUH rated outputClass 1 Division 1, Group D, CSA approved.

c/wAC-1133 - /w 25' battery leadsAC-1181 Protective grill AC-1142 Low temperature safety shutoff valve AC-1166 Maxitrol pressure regulator for 1/2 psi to 7" WCAC-1146 Temperature control thermostat AC-1167 Pressure regulator for maximum 250 psi to 11" WC

Rev. # 0

111 4" x 4" Intake Air "Hump" hose Rev. # 0

112 Thomas Coupling Model CMR-312 Spacer 5 5/16"Flywheel: SAE,13-7/8" od with 13-1/8" bolt circle Bore: Compressor 151 = 1.999" to 2.000" with 1/2" keywayCompressor 120 = 1.5753" to 1.5749" with 0.474" keyway

Rev. # 0

114 TDI Turbostart Engine Turbine Gas powered Starter Model# T312-60017-02R c/w 1” NPT inlet, 2” NPT exhaust, Model No. T30-27398 - straight exhaust kit, right hand rotation, inertia drive, low pressure model

Rev. # 0

115 Exhaust System for Caterpillar 3306NA

Cat SquareFlange (5.5" square), Silex 4" od x 12" oal flexible exhaust connector Model FT-4-12-TPS, mating inlet flange for 4" od tube, long radius 5" 90 deg elbow, 5" id aluminised tube (part No. AC-LR-305)

(2) Silex Weld-On Flange Kit Model AC-W2-005-T c/w qty (2) 5”-125# FF Flanges, all nuts, bolts and gaskets required for 5” OD tube

Silex Hospital Grade Silencer JDDS-5-SISO-612-GO-AL-Ac/w 5”-125# FF bottom (6 o'clock) Inlet, 5" - 125# FF top (12 o'clock) outlet, "FI" and "FO" dimensions minimum, 1/2" shell drain located for bottom entry, gusset outlet flange, Mounting Band kit (part No. AC-MB-022)

Rev. # 0

116 Hoses and connectors for LICSLL-125. 4x Swagelok B-PB8-TA8 end connectors 48" length of Swagelok PB-8-BKN 1/2" hose 24" length of Swagelok PB-8-BKN 1/2" hose. Process Fluid: Engine Oil

Rev. # 0

117 14 usg Engine Oil Day Tank. Part of skid steel (8" x 4" x 112" HSS) Rev. # 0

118-121 Input End Sheave Configuration Engine: 7.0" datum, 3 groove 'A' belt design (Supplied with engine)

Cooler: (1) 2B18.4SK, 18.75" OD, 2 groove 'AB' section sheave, SK tapered bushing for 1 15/16" shaft with 1/2" x 1/4" keyway

Idler: (1) 2B7.0SK, 7.35" OD, 2 groove 'AB' section sheave, SK tapered bushing for 1 7/16" shaft with 3/8" x 3/16" keyway

Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 9: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 8 of 9

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

122 Engine Glycol Expansion Tank1/4" HSS. 8" x 4" x 48" Long5.5 US-gal capacityNote: Manufactured by TPS

Rev. # 0

123 Baldwin Filter AssemblyModel BF-914 assembly Model BF-915 Filterc/w 1" NPT inlet / outletProcess Fluid: Engine oilApplication Filter make-up oil to LIC-126

Rev. # 0

124 V-4 Blowcase Size: 20” O.D. X 51” S/S MAWP: 375 psig @ 250�F MDMT: -20 deg F @ 375 psig C.A.: 0.0625” Note: Manufactured By TPS.

Rev. # 0

Building, Shed-style, Self – Framing 11’ W x 15' L x 9'10" lower eave, 10' 8" upper eave 1:12 roof slope c/w 22 Ga Galvanized Steel Exterior, 24 Ga Fluted Aluminum wall and roof interiorInterior – R12 Insulation Wall/Roof, 4 mil vapour barrier (1) 6’x7’ double Mandoor and frame c/w panic hardware on inside, locking hardware on outside, weather stripping, threshold, check chain and sweep, IGW window in each door (1) 3’x7’ single Mandoor and frame c/w panic hardware on inside, locking hardware on outside, weather stripping, threshold, check chain and sweep (2) 18”x12” wall louvres Fitted to maintain 1/4 open.(1) rooftop turbine vent.(1) wall opening for inlet separator filter removal.

Rev. # 0

Instrumentation General Notes:- All electrical equipment to be CSA approved- Electrical area classification is Class 1, Div II, Group D- Instrument Gas is available- Tubing to be stainless steel, fitting to be cadmium plated with Stainless Steel ferrules

Rev. # 0

BALL VALVES

Rev. # 0

1/2"BCN1

Qty 3Ball Valve, 1/2" NPT, Carbon Steel c/w regular port, API 602 800 lb rating, standard trim

Rev. # 0

3/4"BCN1

Qty 9Ball Valve, 3/4" NPT, Carbon Steel c/w regular port, API 602 800 lb rating, standard trim

Rev. # 0

1"BCN1 Qty 7Ball Valve, 1" NPT, Carbon Steel c/w regular port, API 602 800 lb rating, standard trim

Rev. # 0

1 1/2"BCN1

Qty 1Ball Valve, 1-1/2" NPT, Carbon Steel c/w regular port, API 602 800 lb rating, standard trim

Rev. # 0

1 1/2"BCN1,L

Qty 2Ball Valve, 1 1/2" NPT, Carbon Steel c/w regular port, API 602 800 lb rating, standard trim, locking arrangement

Rev. # 0

1 1/2"BCN1,S

Qty 1Ball Valve, 1-1/2" NPT, Carbon Steel c/w regular port, API 602 800 lb rating, standard trim, spring return handle

Rev. # 0

BUTTERFLY VALVES Rev. # 0

CHECK VALVES Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 10: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125

TOROMONT PROCESS SYSTEMS Page 9 of 9

Name: 10899 - 135HP Burlington Resources Rev. #0

Location TBA

Tag # Item Description

1"CCN2 Qty 2Swing Check Valvec/w 1" NPT connections, carbon steel body, stainless steel trim, API 800# rating

Rev. # 0

1 1/2"CCN2

Qty 1Swing Check Valvec/w 1 1/2" NPT connections, carbon steel body, stainless steel trim, API 800# rating

Rev. # 0

2"CCN2 Qty 1Swing Check Valvec/w 2" NPT connections, carbon steel body, stainless steel trim, API 800# rating

Rev. # 0

4"CC31 Qty 1Twin Flapper Wafer Check Valvec/w 4" 300# carbon steel body, carbon steel trim, metalseats, inconel spring, serrated face

Rev. # 0

GATE VALVES Rev. # 0

1"GCN1,L

Qty 1Gate Valve, 1" NPT, Carbon Steel Body and Trimc/w regular port, API 602 800 lb rating, locking arrangement

Rev. # 0

GLOBE VALVES Rev. # 0

1"LCN1 Qty 2Globe Valve, 1" NPT, Carbon Steel Body and TrimAPI 602 800 lb rating

Rev. # 0

NEEDLE VALVES Rev. # 0

1/4"NCN1

Qty 1Needle Valve, 1/4" FNPT x 1/4" FNPTc/w Carbon Steel Body, Stainless Steel Trim, Intgral Seat, Teflon Packing, 6000# WOG rating

Rev. # 0

1/2"NCN1

Qty 6Needle Valve, 1/2" FNPT x 1/2" FNPTc/w Carbon Steel Body, Stainless Steel Trim, Intgral Seat, Teflon Packing, 6000# WOG rating

Rev. # 0

3/4"NCM3

Qty 1Needle Valve, 3/4" MNPT x 1/2" FNPTc/w Carbon Steel Body, Stainless Steel Trim, Intgral Seat, Teflon Packing, 6000# WOG rating

Rev. # 0

STRAINERS Rev. # 0

1/2"YCN1

Qty 1"Y" Strainer, 1/2" NPT, Cast Steel Body, 600# ratingStainless Steel Mesh, Liquid service

Rev. # 0

1"YCN1 Qty 2"Y" Strainer, 1" NPT, Cast Steel Body, 600# ratingStainless Steel Mesh, Liquid service

Rev. # 0

1-1/2"YCN1

Qty 1"Y" Strainer, 1-1/2" NPT, Cast Steel Body, 600# ratingStainless Steel Mesh, Gas service

Rev. # 0

10899 Burlington Resources 135 hp.xls Rev 0 - 5/14/2015 12:43 PM

Page 11: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 12: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 13: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 14: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 15: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 16: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 17: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 18: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 19: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 20: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125
Page 21: FLOW CURVE (flow rates guaranteed to +/ - 5%)PSV-103 Farris Pressure Safety Valve Model# 27DA33-M20 Set at 245 psig c/w 1" MNPT inlet connection x 1" FNPT outlet connection, 0.125